New end-use application for GFRP recyclates as reinforcement for concrete-polymer materials’

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one-factor-at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and filler replacements for polymer mortar, with significant gain of mechanical properties with regard to non-modified polymer mortars.

An experimental study on recycling and reuse of pultruded composite material wastes

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behavior over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Auditoria à gestão de resíduos industriais

A presente dissertação foi realizada em colaboração com o grupo empresarial Monteiro, Ribas, tendo como principal objectivo a realização de uma auditoria à gestão dos resíduos industriais produzidos pelas suas fábricas localizadas na Estrada da Circunvalação, no Porto. Para cumprir este objectivo, inicialmente foi efectuado um levantamento das obrigações legais relativas aos resíduos e foram procuradas práticas aconselhadas para a gestão interna. Para cada uma das fábricas, verificaram-se, quais os resíduos produzidos e analisaram-se os seus percursos, considerando as suas origens, os locais e modos de acondicionamento na origem, os modos de transporte interno, os locais e modos de armazenagem preliminar, e ainda, as quantidades produzidas, os transportadores, os operadores finais e as operações finais de gestão, sendo que estas quatro últimas informações são relativas ao ano 2013. De seguida procedeu-se à realização da auditoria nas diferentes unidades, verificando o cumprimento dos requisitos legais e das boas práticas em matéria de gestão de resíduos. As principais não conformidades detectadas, comuns às várias unidades fabris foram a inexistência de local/recipiente definido para acondicionamento de alguns resíduos, a falta ou insuficiente identificação de recipientes/zonas de acondicionamento, a inexistência de bacias de retenção para resíduos líquidos perigosos, o facto de no transporte interno apenas os resíduos perigosos serem cobertos e, os resíduos líquidos perigosos não serem transportados sobre bacias de retenção móveis nem com o material necessário para absorver derrames. Para cada resíduo e para cada unidade industrial foram propostas medidas correctivas e/ou de melhoria, quando aplicável. Relativamente à armazenagem preliminar, a principal inconformidade detectada foi o facto de todos os parques (quatro) possuírem resíduos perigosos no momento das auditorias, o que não é adequado. Foram propostas medidas correctivas e/ou de melhoria para cada parque. Como proposta global, tendo em conta factores económicos e de segurança, sugeriu-se que apenas o parque de resíduos perigosos possa armazenar este tipo de resíduos, pelo que os procedimentos de transporte interno devem ser melhorados, fazendo com que estes resíduos sejam transportados directamente para o parque de resíduos perigosos. Desta forma dois dos parques devem sofrer algumas remodelações, nomeadamente serem cobertos e fechados, ainda que não totalmente, e o parque de resíduos perigosos deve ser fechado, mantendo aberturas para ventilação, deve ser equipado com kit´s de contenção de derrames, fichas de segurança, procedimentos a realizar em caso de emergência, e ainda, devido ao facto do sistema de contenção de derrames ser pequeno face ao total de armazenamento, aconselha-se o uso de bacias de retenção para alguns dos recipientes de resíduos líquidos perigosos. Ao longo deste processo e em consequência da realização da auditoria, algumas situações consideradas não conformes foram sendo corrigidas. Também foram preparadas instruções de trabalho adequadas que serão posteriormente disponibilizadas. Foi ainda elaborada uma metodologia de avaliação de processos como base de trabalho para redução dos resíduos gerados. A etapa escolhida para a aplicação da mesma foi uma etapa auxiliar do processo produtivo da Monteiro, Ribas - Revestimentos, S.A - a limpeza de cubas com solventes, por forma a tentar minimizar os resíduos de solventes produzidos nesta operação. Uma vez que a fábrica já realiza a operação tendo em consideração medidas de prevenção e reutilização, a reciclagem é neste momento a única forma de tentar minimizar os resíduos de solventes. Foram então estudadas duas opções, nomeadamente a aquisição de um equipamento de regeneração de solventes e a contratação de uma operadora que proceda à regeneração dos resíduos de solventes e faça o retorno do solvente regenerado. A primeira opção poderá permitir uma redução de cerca de 95% na produção de resíduos de solventes e na aquisição de solvente puro, estimando-se uma poupança anual de cerca de **** €, com um período de recuperação do capital de cerca de 16 meses e a segunda pode conduzir a uma redução significativa na aquisição de solvente puro, cerca de 65%, e a uma poupança anual de cerca de **** €.

Les considérations environnementales dans l'arbitrage d'investissement sous l'égide du CIRDI

L’arbitrage international, outre le recours aux tribunaux de l’État hôte, est la méthode la plus utilisée pour régler les différends relatifs aux investissements étrangers. Plusieurs accords internationaux d’investissement incluent des dispositions ayant trait à l’arbitrage sous l’égide du Centre International pour le Règlement des Différends relatifs aux Investissements (CIRDI) mis en place par la Convention de Washington de 1966. Les tribunaux arbitraux constitués sous l’égide du Centre sont ainsi appelés à trancher des différends qui concernent la conduite d’États hôtes vis-à-vis ses investisseurs étrangers ; leurs décisions ayant de fortes conséquences sur l’intérêt public, concrètement lorsqu’il s’agit de la protection de l’environnement. L’évolution croissante du droit environnemental et son empiètement sur la protection des investissements a déclenché une série de différends qui ne se limitent plus à mettre en cause des nationalisations ou des violations de contrats - comme auparavant - mais tournent souvent autour de mesures étatiques de politique publique qui impliquent des questions sensibles telles que, inter alia, la gestion de déchets dangereux, l’accès à l’eau potable, l’étalement urbain, la protection de la biodiversité. Par conséquent, le rôle des tribunaux CIRDI et de leurs décisions devient décisif dans le développement du droit des investissements et dans le débat sur la protection des investissements face aux mesures législatives en matière environnementale. Cette étude a pour objet d’analyser la place des considérations environnementales dans les sentences arbitrales CIRDI. Spécifiquement, il s’agit d’étaler les principaux arguments retenus par les tribunaux internationaux, et de dégager les grandes tendances jurisprudentielles en matière d’arbitrage international d’investissements face aux mesures environnementales.

Les lacunes du droit relatif au mouvement transfrontière des déchets dangereux : illustration à l’aide de l’affaire Probo Koala en Côte d’Ivoire

Prenant l’affaire Probo Koala en Côte d’Ivoire comme l’élément déclencheur d’une observation, ce mémoire étudie les fondements des mouvements transfrontières illégaux des déchets dangereux des pays développés vers les pays en développement. En effet, nonobstant la pluralité des dispositions juridiques internationales, le transfert des déchets illicites demeure une actualité dans les pays du tiers monde dont particulièrement ceux de l’Afrique noire et à la fois un tabou dans ceux du Nord et du Sud. Les deux domaines proposés, droit international et national, montrent comment les faiblesses et la non-application des dispositions juridiques conduisent à des actes socialement irresponsables. De ce fait, des réformes tant au niveau juridique que judiciaire ainsi que l’implication des parties prenantes sont suggérées comme solutions pour combattre ce fléau.

Profils des toxicomanes judiciarisés en traitement dans deux centres de réadaptation publics au Québec

L’objectif de la présente étude consiste à tenter de mieux connaître la population judiciarisée qui se présente en traitement pour des problèmes de toxicomanies. Deux cent seize clients admis en traitement dans deux centres de réadaptation en toxicomanie du Québec constituent l’échantillon. Ces sujets ont répondu à l’Indice de gravité d’une toxicomanie (IGT-ASI), au Millon Clinical Multiaxial Inventory (MCMI), à l’Inventaire de personnalité Jesness, et au University of Rhodes Island Change Assessment Scale (URICA). Ces outils nous serviront à décrire la popula~tion étudiée. L’analyse des données nous entraîne dans une réflexion à deux niveaux. D’une part, l’observation de problématiques multiples dans la population à l’étude nous questionne sur les possibilités de mettre en place des services de traitement adéquats pour ces personnes qui apparaissent éprouver des problèmes d’adaptation à plusieurs niveaux. D’autre part, le niveau des problèmes de toxicomanie des personnes référées par le système de justice nous interroge sur la pertinence de certaines de ces références.

Production and Characterization of Lignin Peroxidases from Mangrove Ascomycetes

The continually growing worldwide hazardous waste problem is receiving much attention lately. The development of cost effective, yet efficient methods of decontamination are vital to our success in solving this problem.Bioremediation using white rot fungi, a group of basidiomycetes characterized by their ability to degrade lignin by producing extracellular LiP, MnP and laccase have come to be recognized globally which is described in detail in Chapter 1.These features provide them with tremendous advantages over other micro-organisms.Chapter 2 deals with the isolation and screening of lignin degrading enzyme producing micoro-organisms from mangrove area. Marine microbes of mangrove area has great capacity to tolerate wide fluctuations of salinitie.Primary and secondary screening for lignin degrading enzyme producing halophilic microbes from mangrove area resulted in the selection of two fungal strains from among 75 bacteria and 26 fungi. The two fungi, SIP 10 and SIP ll, were identified as penicillium sp and Aspergillus sp respectively belonging to the class Ascomycetes .Specific activity of the purified LiP was 7923 U/mg protein. The purification fold was 24.07 while the yield was 18.7%. SDS PAGE of LiP showed that it was a low molecular weight protein of 29 kDa.Zymogram analysis using crystal violet dye as substrate confirmed the peroxidase nature of the purified LiP.The studies on the ability of purified LiP to decolorize different synthetic dyes was done. Among the dyes studied, crystal violet, a triphenyl methane dye was decolorized to the greatest extent.

Influence of a Salt Water Regulator on the Survival Response of Salmonella Paratyphi in Vembanadu Lake: India

Contamination of environmental water by pathogenic microorganisms and subsequent infections originated from such sources during different contact and non- contact recreational activities are a major public health problem worldwide particularly in developing countries. The main pathogen frequently associated with enteric infection in developing countries are Salmonella enterica serovar typhi and paratyphi. Although the natural habitat of Salmonella is the gastrointestinal tract of animals, it find its way into natural water through faecal contamination and are frequently identified from various aquatic environments (Baudart et al., 2000; Dionisio et al., 2000; Martinez -Urtaza et al., 2004., Abhirosh et al., 2008). Typhoid fever caused by S. enterica serotype typhi and paratyphi are a common infectious disease occurring in all the parts of the world with its highest endemicity in certain parts of Asia, Africa, Latin America and in the Indian subcontinent with an estimated incidence of 33 million cases each year with significant morbidity and mortality (Threlfall, 2002). In most cases the disease is transmitted by polluted water (Girard et al., 2006) because of the poor hygienic conditions, inadequate clean water supplies and sewage treatment facilities. However in developed countries the disease is mainly associated with food (Bell et al., 2002) especially shellfish (Heinitz et al., 2000

Site Controller: A System for Computer-Aided Civil Engineering and Construction

A revolution\0\0\0 in earthmoving, a $100 billion industry, can be achieved with three components: the GPS location system, sensors and computers in bulldozers, and SITE CONTROLLER, a central computer system that maintains design data and directs operations. The first two components are widely available; I built SITE CONTROLLER to complete the triangle and describe it here. SITE CONTROLLER assists civil engineers in the design, estimation, and construction of earthworks, including hazardous waste site remediation. The core of SITE CONTROLLER is a site modelling system that represents existing and prospective terrain shapes, roads, hydrology, etc. Around this core are analysis, simulation, and vehicle control tools. Integrating these modules into one program enables civil engineers and contractors to use a single interface and database throughout the life of a project.

Implementación de estrategias de producción más limpia en la empresa inversiones Rustiplast Ltda.

Este trabajo de grado es el resultado de un diagnóstico de gestión ambiental realizado a Inversiones Rustiplast, una fábrica de pinturas que a pesar de tener acercamientos empíricos en este tema requería de un método juicioso que le permitiera establecer lineamientos y procedimientos en la implementación de estrategias de producción más limpia. Es allí donde surgió la necesidad de realizar un estudio de impactos y aspectos ambientales de los procesos de producción más importantes de la empresa, que permitió proponer programas que mitigan aquellos impactos negativos al ambiente dándole una importancia primordial a la normatividad que debe cumplir la compañía para poder desenvolverse en cada uno de ellos.

The design process paradox : traditional design processes vs. eco-design processes

The Brundtland Report (WCED, 1987) best known for its popularisation of the concept of sustainable development, also made recommendations for a new approach to design and production, setting out terms for: ‘a production system that respects... the ecological base’ and ‘a technological system that searches continuously for new solutions’. The industrial production, consumption and waste treatment of products today causes a large amount of various environmental burdens. The development and design of new products with reduced environmental impact is one of the new challenges towards a more sustainable society and is therefore an important task in the near future.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Selective Synthesis of Oxacalix[6]arenes and Mixed Oxacalix[4]arenes

Calixarenesare macrocycles composed of benzene rings meta linked to each other by one carbon atom. These exotic compounds can be used for a variety of purposes including metalleaching for environmental cleanup, surface technology, luminescent probes, nuclear waste treatment, among others. A variety of calixarenesexist, including azacalix[n]arenesthiocalix[n]arenes(where n = the number of benzene rings) and oxacalix[n]arenes; these macrocycles use nitrogen, sulfur and oxygen, respectively, as the atom whichlinks the benzene rings together. My research has focused on synthesizing oxacalix[6]arenes (“hexamer”) in high yield, which is a synthetic challenge because it is generally accepted that oxacalix[n>4]arenes will thermodynamically decompose to the oxacalix[4]arene (“tetramer”); i.e. heating the reaction mixture will yield the tetramer, not the hexamer. To generate the hexamer, “trimer”precursors have been synthesized, in the hopes of facilitating hexamer ring closure.

Inovações tecnológicas na caprinocultura

O largo crescimento do setor de agronegócios no Brasil tem estimulado mudanças nos sistemas produtivos, tanto na intensificação, como na profissionalização da produção. Dessa forma, os produtores têm buscado estratégias para melhor atender aos desafios da atividade pecuária atual, dentre as quais se destacam as inovações tecnológicas que devem resultar em comprovado benefício à atividade, seja pelo aumento em produtividade, seja pela melhoria na qualidade dos produtos, seja pela conscientização do respeito ao meio ambiente. Assim como em outros segmentos do agronegócio brasileiro, na caprinocultura existe uma demanda crescente pela aplicação de inovações tecnológicas, uma vez que o sistema produtivo precisa ser mais competitivo para se manter no mercado. Dentre as inovações tecnológicas aplicadas na caprinocultura, foram abordadas as mais relevantes nas áreas de reprodução (desde métodos para indução de cio até a prática da transgenia), melhoramento genético (biogenética), sanidade (inovações no diagnóstico e prevenção de doenças de maior impacto na criação), nutrição (inovações nos sistemas de alimentação) e tratamento de dejetos (diminuição de contaminantes no ambiente). A utilização conjunta das inovações tecnológicas nos diferentes segmentos associados à cadeia produtiva caprina pode fazer com que ocorram melhorias nos rebanhos assim como nos produtos gerados.