Recycling of glass cullet as aggregate for clays used to produce roof tiles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The use of transmission electron microscopy and oocyte transfer to evaluate in vitro maturation of equine oocytes in different culture conditions

The current study evaluates the ability of equine oocytes matured in different conditions to undergo nuclear and cytoplasmic maturation.. After oocyte transfer, embryonic development was diagnosed at 1.5 and 90 days of gestation. For each group, immature oocytes obtained from slaughterhouse ovaries were matured in vitro (5 replicates). In experiment I, three different media were tested. HTF:BME, SOFaa, and TCM 199. In experiment 11, the HTF:BME was chosen as maturation medium containing pFSH, eFSH, or eFSH + eGH. Nuclear maturation was estimated after stripping the oocytes and staining with Hoechst 33342. The evaluation of cytoplasmic maturation was performed by transmission electron microscopy. For oocyte transfer, six non-cycling recipient mares were used, and 8 to 15 oocytes were transferred in each mare. In experiment I, the results showed no differences (P > .05) in nuclear maturation (MII) among experimental groups. The percentage of MII was 29.3 ( +/- 9.6), 23.4 ( +/- 8.4), and 13.5 ( +/- 12.4) for HTF:BME, SOF, and TCM, respectively. In experiment II, all media tested were efficient in inducing metaphase II. Also, no statistical differences (P > .05) were observed in percentages of nuclear maturation rates when porcine (37.1 +/- 22.4) or equine (25.8 +/- 8.2) FSH were used, or when eFSH + eGH was added to HTF:BME (29.4 +/- 12.3). The analysis of cytoplasmic morphology of oocytes cultured in TCM 199 and SOFaa showed signs of incomplete cytoplasmic maturation and premature cortical reaction. Meanwhile, oocytes cultured in HTF:BME medium presented cytoplasmic characteristics similar to those described by others for in vivo-matured oocytes. The addition of eFSH to the HTF:BME medium resulted in an improvement of cytoplasmic morphology. After oocyte transfer, two mares became pregnant, one from pFSH group and one from eFSH+eGH group. These results indicate that although in vitro matured equine oocytes are capable of fertilization and embryonic development, the percentage of competent oocytes is still low.

Immunohistochemical detection of receptors for oestrogen and progesterone in endometrial glands and stroma during the oestrous cycle in Nelore (Bos taurus indicus) cows

The aim of the present study was to monitor endometrial distribution and concentrations of oestrogen receptors alpha (ER alpha) and progesterone receptors (PR) by immunohistochemistry in Nelore cows (Bos taurus indicus) during the oestrous cycle. Blood samples were collected for progesterone measurement and endometrial samples were taken from the uterine horn contra lateral to the corpus luteum in 16 cows at days 0 (ovulation), 5, 9, 13 and 19 of the oestrous cycle. Immunostaining evaluation for ER alpha and PR in the glandular epithelium and uterine stroma was performed by two methods: positive nuclei counting and staining intensity of the nuclei. Specific positive staining reactions for both receptors were limited to cell nuclei and they were not identified in the cytoplasm. The proportion of ER alpha positive nuclei had a temporal variation throughout the oestrous cycle in both cell types evaluated and was higher in uterine stroma than the glandular epithelium (p < 0.05). The greatest proportion of ER alpha stained nuclei was observed at oestrus and during the initial and mid luteal phase (days 5, 9 and 13) (p < 0.05) in the glandular epithelium and at days 0, 5 and 9 in the uterine stroma (p < 0.01). The proportion of PR positive nuclei remained constant throughout the entire oestrous cycle for both cell types evaluated (p > 0.05). A higher proportion of PR positive nuclei was measured in the uterine stroma compared with the glandular epithelium (p < 0.05). Intensity of staining for ER alpha and PR varied throughout the oestrous cycle (p < 0.01). There was a higher staining intensity at days 0 and 5 in the stroma for ER alpha (p < 0.01) and PR (p < 0.01) and in the glandular epithelium at days 0, 5, 9 and 13 for ER alpha (p < 0.01) and at days 0, 5 and 9 for PR (p < 0.01) when compared with the other evaluated days. These data demonstrate that ER alpha and PR expression varied throughout the oestrous cycle in Nelore cows, in general with highest concentrations at oestrus and the lowest during the luteal phase. This is similar to patterns observed in Bos taurus taurus.

Surface Roughness Analysis of Four Restorative Materials Exposed to 10% and 15% Carbamide Peroxide

The aim of this study was to evaluate the effects of carbamide peroxide (CP) on surfaces of different restorative materials. Porcelain, composite resin, glass ionomer, and amalgam were analyzed in this study. Surface roughness (Ra) was measured before and after treatment with 10% and 15% CP. Fifteen percent CP increased Ra values in both the glass ionomer and amalgam subgroups, while 10% CP increased Ra values in the glass ionomer subgroup only. Changes in restorative material surfaces can be more severe when bleaching is completed without a clinician's supervision. Hence, thorough patient examinations must be done before, during, and after bleaching treatment. Int J Prosthodont 2011;24:155-157

Regeneration of class III furcation defects with basic fibroblast growth factor (b-FGF) associated with GTR. A descriptive and histometric study in dogs

Background: the poor predictability of periodontal regenerative treatment of Class III furcation defects stimulates the study of alternatives to improve its results, such as the use of polypeptide growth factors. The objective of this study was to evaluate, both histologically and histometrically, the effects of topical application of basic fibroblast growth factor (b-FGF) associated with guided tissue regeneration (GTR) in the treatment of Class III defects surgically induced in dogs.Methods: All second and fourth premolars of 5 mongrel dogs were used and randomly assigned to one of three treatment groups: group 1 (control), treated with scaling and root planing, tetracycline hydrochloride (125 mg/ml) conditioning, and GTR with a collagen membrane; group 2, same treatment as group 1 plus 0.5 mg of b-FGF; group 3, same treatment as group 1 plus 1.0 mg of b-FGF. After a 90-day healing period, routine histologic processing and staining with hematoxylin and eosin and Masson trichrome were performed.Results: the descriptive analysis indicated better regenerative results in both groups treated with b-FGF while the histometric data, analyzed by means of analysis of variance (ANOVA), showed greater filling of the defects in group 2 in comparison to the defects in groups 3 and 1, respectively, which was represented by a smaller area of plaque-occupied space (P = 0.004) as well as a greater amount of newly formed cementum (P = 0.002).Conclusions: These results indicate that b-FGF, especially in smaller doses, may enhance the regenerative results in Class III furcation lesions, leading to greater filling of these defects with both mineralized and non-mineralized tissues.

Tissue response to experimental dental cements prepared from a modified power glass composition

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R)

Tanomaru-Filho M, Silveira GF, Reis JMSN, Bonetti-Filho I, Guerreiro-Tanomaru JM. Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R). International Endodontic Journal, 44, 1019-1023, 2011.Aim To analyse a method used to evaluate the thermomechanical properties of gutta-percha and Resilon at different temperatures and compression loads.Methodology Two hundred and seventy specimens measuring 10 mm in diameter and 1.5 mm in height were made from the following materials: conventional gutta-percha (GCO). thermoplastic gutta-percha (GTP) and Resilon (R) cones (RE). After 24 h, the specimens were placed in water at 50 degrees C. 60 degrees C or 70 degrees C for 60 s. After that, specimens were placed between two glass slabs, and loads weighing 1.0, 3.0 or 5.0 kg were applied. Images of the specimens were digitized before and after the test and analysed using imaging software to determine their initial and final areas. The thermomechanical property of each material was determined by the difference between the initial and final areas of the specimens. Data were subjected to ANOVA and SNK tests at 5% significance. To verify a possible correlation between the results of the materials, linear regression coefficients (r) were calculated.Results Data showed higher flow area values for RE under all compression loads at 70 degrees C and under the 5.0 kg load at 60 degrees C (P < 0.05). Regarding gutta-percha, GTP showed higher flow under loads weighing 3.0 and 5.0 kg. at 60 and 70 degrees C (P < 0.05). GCO presented higher flow at 70 degrees C with a load of 5.0 kg. Regression analyses showed a poor linear correlation amongst the results of the materials under the different experimental conditions.Conclusion Gutta-percha and Resilon (R) cones require different compression loads and temperatures for evaluation of their thermomechanical properties. For all materials, the greatest flow occurred at 70 degrees C under a load of 5.0 kg: therefore. these parameters may be adopted when evaluating endodontic tilling materials.

Comparative cytogenetic studies of Bufo ictericus, B. paracnemis (Amphibia, Anura) and an intermediate form in sympatry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microbiological or Chemical Models of Enamel Secondary Caries Compared by Polarized-Light Microscopy and Energy Dispersive X-ray Spectroscopy

Different secondary caries models may present different results. The purpose of this study was to compare different in vitro secondary caries models, evaluating the obtained results by polarized-light microscopy (PLM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Standardized human enamel specimens (n = 12) restored with different materials (Z250 conventional composite resin-CRZ, Freedom polyacid-modified composite resin-CRF, Vitremer resin-modified glass-ionomer-GIV, and Fuji IX conventional glass-ionomer cement-GIF) were submitted to microbiological (MM) or chemical caries models (CM). The control group was not submitted to any caries model. For MM, specimens were immersed firstly in sucrose broth inoculated with Streptococcus mutans ATCC 35688, incubated at 37 degrees C/5% CO(2) for 14 days and then in remineralizing solution for 14 days. For CM, specimens were submitted to chemical pH-cycling. Specimens were ground, submitted to PLM and then were dehydrated, gold-sputtered and submitted to SEM and EDS. Results were statistically analyzed by Kruskall-Wallis and Student-Newman-Keuls tests (alpha = 0.05). No differences between in vitro caries models were found. Morphological differences in enamel demineralization were found between composite resin and polyacid-modified composite resin (CRZ and CRF) and between the resin-modified glass-ionomer and the glass-ionomer cement (GIF and GIV). GIF showed higher calcium concentration and less demineralization, differing from the other materials. In conclusion, the glass-ionomer cement showed less caries formation under both in vitro caries models evaluated. (C) 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 90B: 635-640, 2009

Production of DNA microarray and expression analysis of genes from Xylella fastidiosa in different culture media

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal and mechanical properties of PVDF/PANI blends

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leukocyte and thrombocyte reference values for channel catfish (Ictalurus punctatus Raf), with an assessment of morphologic, cytochemical, and ultrastructural features

Background: Hematology tests are useful to evaluate physiologic disturbances in fish and can provide important information for the diagnosis and prognosis of disease. Objectives: the primary purpose of this study was to define reference intervals for thrombocytes and leukocytes in healthy channel catfish (Ictalurus punctactus). In addition, the morphologic, cytochernical, and ultrastructural features of blood cells were assessed. Methods: Blood samples (0.5 mL were collected into EDTA from 40 clinically healthy catfish on a commercial fish farm in Jaboticabal, Brazil. Thrombocyte, total WBC, and differential WBC counts were determined and reference intervals were calculated as the 25-95th percentiles of data. Thrombocyte and leukocyte morphology was assessed in blood smears stained with May Griinwald-Giemsa-Wright and ultrastructurally by transmission electron microscopy. Cytochemical staining patterns were described using periodic acid-Schiff (PAS), peroxidase, nonspecific esterase, alkaline phosphatase, and toluidine blue. Results: Reference intervals were as follows: thrombocytes 58,802-99,569/mu L; total WBCs 27,460-41,523/mu L; lymphocytes 5380-11,581/mu L; monocytes 2949-7459/mu L; neutrophils 12,529-22,748/mu L, and basophils 736-2003/mu L. Neutrophils were positive for peroxidase and PAS; monocytes were positive for nonspecific esterase; and basophils were positive with toluidine blue. Conclusion: the morphologic and staining features of neutrophils and monocytes of channel catfish are similar to those of mammals, and the presence of basophils in this species was verified. These reference intervals and morphologic findings provide a foundation for future investigations on the functions and alterations of blood cells in channel catfish.

Fluorescence and confocal laser scanning microscopy imaging of elastic fibers in hematoxylin-eosin stained sections

We have studied the possibility of associating fluorescence microscopy and hematoxylin-eosin staining for the identification of elastic fibers in elastin-rich tissues. Elastic fibers and elastic laminae were consistently identified by the proposed procedure, which revealed itself to be easy and useful for the determination of such structures and their distribution. The fluorescence properties of stained elastic fibers are due to eosin staining as revealed by fluorescence analysis of the dye in solution, with no or only minor contribution by the elastin autofluorescence. The main advantage of this technique resides in the possibility of studying the distribution of elastic fibers in file material without further sectioning and staining. The use of the confocal laser scanning microscope greatly improved the resolution and selectivity of imaging elastic fibers in different tissues. The determination of the three-dimensional distribution and structure of elastic fiber and laminae using the confocal laser scanning microscope was evaluated and also produced excellent results.

Histomorphometrical analysis of bone formed after maxillary sinus floor augmentation by grafting with a combination of autogenous bone and demineralized freeze-dried bone allograft or hydroxyapatite

Background: Maxillary sinus floor augmentation procedures are currently the treatment of choice when the alveolar crest of the posterior maxilla is insufficient for dental implant anchorage. This procedure aims to obtain enough bone with biomaterial association with the autogenous bone graft to create volume and allow osteo conduction. The objective of this study was to histologically and histometrically evaluate the bone formed after maxillary sinus floor augmentation by grafting with a combination of autogenous bone, from the symphyseal area mixed with DFDBA or hydroxyapatite.Methods: Ten biopsies were taken from 10 patients 10 months after sinus floor augmentation using a combination of 50% autogenous bone plus 50% dernineralized freeze-dried bone allograft (DFDBA group) or 50% autogenous bone plus 50% hydroxyapatite (HA group). Routine histological processing and staining with hernatoxylin and eosin and Masson's trichrome were performed.Results: the histomorphometrical analysis indicated good regenerative results in both groups for the bone tissue mean in the grafted area (50.46 +/- 16.29% for the DFDBA group and 46.79 +/- 8.56% for the HA group). Histological evaluation revealed the presence of mature bone with compact and cancellous areas in both groups. The inflammatory infiltrate was on average nonsignificant and of mononuclear prevalence. Some biopsies showed blocks of the biomaterial in the medullary spaces close to the bone wall, with absence of osteogenic activity.Conclusions: the results indicated that both DFDBA and HA associated with an autogenous bone graft were biocompatible and promoted osteoconduction, acting as a matrix for bone formation. However, both materials were still present after 10 months.

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns

Objective: the aim of this investigation was to evaluate the cervical adaptation of metal crowns under several conditions, namely (1) variations in the cervical finish line of the preparation, (2) application of internal relief inside the crowns, and (3) cementation using different luting materials. Method and Materials: One hundred eighty stainless-steel master dies were prepared simulating full crown preparations: 60 in chamfer (CH), 60 in 135-degree shoulder (OB), and 60 in rounded shoulder (OR). The finish lines were machined at approximate dimensions of a molar tooth preparation (height: 5.5 mm; cervical diameter: 8 mm; occlusal diameter: 6.4 mm; taper degree: 6; and cervical finish line width: 0.8 mm). One hundred eighty corresponding copings with the same finish lines were fabricated. A 30-mu m internal relief was machined 0.5 mm above the cervical finish line in 90 of these copings. The fit of the die and the coping was measured from all specimens (L0) prior to cementation using an optical microscope. After manipulation of the 3 types of cements (zinc phosphate, glass-ionomer, and resin cement), the coping was luted on the corresponding standard master die under 5-kgf loading for 4 minutes. Vertical discrepancy was again measured (L1), and the difference between L1 and L0 indicated the cervical adaptation. Results: Significant influence of the finish line, cement type, and internal relief was observed on the cervical adaptation (P < .001). The CH type of cervical finish line resulted in the best cervical adaptation of the metal crowns regardless of the cement type either with or without internal relief (36.6 +/- 3 to 100.8 +/- 4 mu m) (3-way analysis of variance and Tukey's test, alpha = .05). The use of glass-ionomer cement resulted in the least cervical discrepancy (36.6 +/- 3 to 115 +/- 4 mu m) than those of other cements (45.2 +/- 4 to 130.3 +/- 2 mu m) in all conditions. Conclusion: the best cervical adaptation was achieved with the chamfer type of finish line. The internal relief improved the marginal adaptation significantly, and the glass-ionomer cement led to the best cervical adaptation, followed by zinc phosphate and resin cement.