Optimal trading of wind power in the short term market

The energy reform, which is happening all over the world, is caused by the common concern of the future of the humankind in our shared planet. In order to keep the effects of the global warming inside of a certain limit, the use of fossil fuels must be reduced. The marginal costs of the renewable sources, RES are quite high, since they are new technology. In order to induce the implementation of RES to the power grid and lower the marginal costs, subsidies were developed in order to make the use of RES more profitable. From the RES perspective the current market is developed to favor conventional generation, which mainly uses fossil fuels. Intermittent generation, like wind power, is penalized in the electricity market since it is intermittent and thus diffi-cult to control. Therefore, the need of regulation and thus the regulation costs to the producer differ, depending on what kind of generation market participant owns. In this thesis it is studied if there is a way for market participant, who has wind power to use the special characteristics of electricity market Nord Pool and thus reach the gap between conventional generation and the intermittent generation only by placing bids to the market. Thus, an optimal bid is introduced, which purpose is to minimize the regulation costs and thus lower the marginal costs of wind power. In order to make real life simulations in Nord Pool, a wind power forecast model was created. The simulations were done in years 2009 and 2010 by using a real wind power data provided by Hyötytuuli, market data from Nord Pool and wind forecast data provided by Finnish Meteorological Institute. The optimal bid needs probability intervals and therefore the methodology to create probability distributions is introduced in this thesis. In the end of the thesis it is shown that the optimal bidding improves the position of wind power producer in the electricity market.

Development of an automated bench top electronic penetrometer

The aim of this study was to develop a an automated bench top electronic penetrometer (ABEP) that allows performing tests with high rate of data acquisition (up to 19,600 Hz) and with variation of the displacement velocity and of the base area of cone penetration. The mechanical components of the ABEP are: a supporting structure, stepper motor, velocity reducer, double nut ball screw and six penetration probes. The electronic components of ABEP are: a "driver" to control rotation and displacement, power supply, three load cells, two software programs for running and storing data, and a data acquisition module. This penetrometer presented in compact size, portable and in 32 validation tests it proved easy to operate, and showed high resolution, high velocity in reliability in data collection. During the validation tests the equipment met the objectives, because the test results showed that the ABEP could use different sizes of cones, allowed work at different velocities, showed for velocity and displacement, were only 1.3% and 0.7%, respectively, at the highest velocity (30 mm s-1) and 1% and 0.9%, respectively for the lowest velocity (0.1 mm s-1).

Usable Privacy Preservation in Mobile Electronic Personality

Personalised ubiquitous services have rapidly proliferated due technological advancements in sensing, ubiquitous and mobile computing. Evolving societal trends, business and the economic potential of Personal Information (PI) have overlapped the service niches. At the same time, the societal thirst for more personalised services has increased and are met by soliciting deeper and more privacy invasive PI from customers. Consequentially, reinforcing traditional privacy challenges and unearthed new risks that render classical safeguards ine ective. The absence of solutions to criticise personalised ubiquitous services from privacy perspectives, aggravates the situation. This thesis presents a solution permitting users' PI, stored in their mobile terminals to be disclosed to services in privacy preserving manner for personalisation needs. The approach termed, Mobile Electronic Personality Version 2 (ME2.0), is compared to alternative mechanisms. Within ME2.0, PI handling vulnerabilities of ubiquitous services are identi ed and sensitised on their practices and privacy implications. Vulnerability where PI may leak through covert solicits, excessive acquisitions and legitimate data re-purposing to erode users privacy are also considered. In this thesis, the design, components, internal structures, architectures, scenarios and evaluations of ME2.0 are detailed. The design addresses implications and challenges leveraged by mobile terminals. ME2.0 components and internal structures discusses the functions related to how PI pieces are stored and handled by terminals and services. The architecture focusses on di erent components and their exchanges with services. Scenarios where ME2.0 is used are presented from di erent environment views, before evaluating for performance, privacy and usability.

Candace Bushnellin Trading Up Edith Whartonin romaanin The Custom of the Country uudelleenkirjoituksena

Candace Bushnellin (1958–) vuonna 2003 julkaistu romaani Trading Up kuvaa nuoren naispäähenkilön määrätietoista pyrkimystä rikkauteen, maineeseen ja New Yorkin suihkuseurapiireihin. Se on uudelleenkirjoitus Edith Whartonin romaanista The Custom of the Country (1913). Wharton (1862–1937) käsitteli tuotannossaan New Yorkin vanhaa yläluokkaa ja kuvasi usein liikettä yhteiskuntaluokassa ylös tai alas. 1990-luvulta alkaen Bushnell on käsitellyt teoksissaan samankaltaisia aiheita, joskin oman aikansa kontekstissa. Hän on itse todennut Whartonin teosten olevan merkittäviä esikuvia omalle tuotannolleen. Pro gradu -tutkielmassani tarkastelen Bushnellin romaania Trading Up Whartonin The Custom of the Country -teoksen uudelleenkirjoituksena. Analysoimalla teoksia rinnakkain selvitän, millaisia keinoja Bushnell käyttää uudelleenkirjoituksessaan ja mikä merkitys Whartonin romaanin uudelleenkirjoituksella on. Tutkimusnäkökulmani on feministinen, ja keskityn valtasuhteisiin liittyviin kysymyksiin. Tarkastelen etenkin yhteiskuntaluokkaan, sukupuoleen ja seksuaalisuuteen liittyviä valtasuhteita ja sitä, miten valtasuhteet Bushnellin uudelleenkirjoituksessa eroavat Whartonin romaanissa esiintyvistä. Tarkastelen tutkimiani romaaneja myös genren näkökulmasta, Trading Up -romaania osana chick lit -genreä ja The Custom of the Country -teosta taparomaanina. Chick lit on 1990- luvulla syntynyt viihteellinen naisten kirjallisuuden genre, joka kuvaa nuoria naisia ja käsittelee esimerkiksi ihmissuhteita ja perheeseen, työelämään tai ulkonäköön liittyviä kysymyksiä. Kulutuskulttuuri ja uusliberalistinen yksilöllisyys kuuluvat chick lit -genreen. Se on kytketty myös postfeminismiin: chick litissä feminismistä joko vaietaan, tai se esitetään pikemminkin yksittäisten naisten elämäntapavalintoina kuin poliittisena liikkeenä. Bushnellin lisäksi myös muut chick lit -kirjailijat ovat teoksissaan viitanneet taparomaaneihin. Tutkielmassani totean Bushnellin uudelleenkirjoittavan The Custom of the Country -romaania paikoitellen hyvin suoraan. Vaikka teosten ajallisen etäisyyden ja yhteiskunnallisten muutosten takia esimerkiksi yhteiskuntaluokkaan liittyvissä valtasuhteissa on tapahtunut muutoksia, esitetään monet asiat muuttumattomina. Etenkin sukupuolen kuvaus ja sukupuoltenväliset valtasuhteet näyttäytyvät samankaltaisina kummassakin teoksessa. Postfeminismissä ja uusliberalismissa yksilön mahdollisuutta tehdä valintoja korostetaan. Bushnellin romaanin naishenkilöhahmoilla pitäisi olla enemmän valinnan mahdollisuuksia kuin Whartonin sankarittarilla, mutta näiden tekemät ratkaisut ovat lopulta hyvin samankaltaisia. Vaikka Trading Up toistaa Whartonin teoksen tarinaa melko tarkasti, ei siitä välity Whartonin romaanissa merkittävää yhteiskuntakriittisyyttä.

Performance characteristic of moving average trading rules in the Finnish stock market

The thesis examines the profitability of DMAC trading rules in the Finnish stock market over the 1996-2012 period. It contributes to the existing technical analysis literature by comparing for the first time the performance of DMAC strategies based on individual stock trading portfolios to the performance of index trading strategies based on the trading on the index (OMX Helsinki 25) that consists of the same stocks. Besides, the market frictions including transaction costs and taxes are taken into account, and the results are reported from both institutional and individual investor’s perspective. Performance characteristic of DMAC rules are evaluated by simulating 19,900 different trading strategies in total for two non- overlapping 8-year sub-periods, and decomposing the full-sample-period performance of DMAC trading strategies into distinct bullish- and bearish-period performances. The results show that the best DMAC rules have predictive power on future price trends, and these rules are able to outperform buy-and-hold strategy. Although the performance of the DMAC strategies is highly dependent on the combination of moving average lengths, the best DMAC rules of the first sub-period have also performed well during the latter sub-period in the case of individual stock trading strategies. According to the results, the outperformance of DMAC trading rules over buy-and-hold strategy is mostly attributed to their superiority during the bearish periods, and particularly, during stock market crashes.

From electronic spare part catalog to eBusiness: Finding the best practices

Companies and organizations business activities rely on information. IT systems that manage master data must provide the highest level of service, world-class scalability and reliable information. This study discusses product information and how it can support the creation of a spare part catalog and the launching of eBusiness. The study consists of a theoretical and empirical part. The theoretical part contains a literature review and a framework for the analysis. For the empirical study two companies were selected and their information management processes were studied and analyzed based on the framework. The empirical results indicate that the challenges the companies face reflect the ones that can be found in the literature study. The results of the empirical study also show that the companies had recognized the issues which need to be developed and had recognized trends in eBusiness and product information management.

A high frequency electronic transducer for multiphase flow measurements

This paper describes an electronic transducer for multiphase flow measurement. Its high sensitivity, good signal to noise ratio and accuracy are achieved through an electrical impedance sensor with a special guard technique. The transducer consists of a wide bandwidth and high slew rate differentiator where the lead inductance and stray capacitance effects are compensated. The sensor edge effect is eliminated by using a guard electrode based on the virtual ground potential of the operational amplifier. A theoretical modeling and a calibration method are also presented. The results obtained seem to confirm the validity of the proposed technique.

Integration of Electronic Commerce and Enterprise Systems

The necessity of EC (Electronic Commerce) and enterprise systems integration is perceived from the integrated nature of enterprise systems. The proven benefits of EC to provide competitive advantages to the organizations force enterprises to adopt and integrate EC with their enterprise systems. Integration is a complex task to facilitate seamless flow of information and data between different systems within and across enterprises. Different systems have different platforms, thus to integrate systems with different platforms and infrastructures, integration technologies, such as middleware, SOA (Service-Oriented Architecture), ESB (Enterprise Service Bus), JCA (J2EE Connector Architecture), and B2B (Business-to-Business) integration standards are required. Huge software vendors, such as Oracle, IBM, Microsoft, and SAP suggest various solutions to address EC and enterprise systems integration problems. There are limited numbers of literature about the integration of EC and enterprise systems in detail. Most of the studies in this area have focused on the factors which influence the adoption of EC by enterprise or other studies provide limited information about a specific platform or integration methodology in general. Therefore, this thesis is conducted to cover the technical details of EC and enterprise systems integration and covers both the adoption factors and integration solutions. In this study, many literature was reviewed and different solutions were investigated. Different enterprise integration approaches as well as most popular integration technologies were investigated. Moreover, various methodologies of integrating EC and enterprise systems were studied in detail and different solutions were examined. In this study, the influential factors to adopt EC in enterprises were studied based on previous literature and categorized to technical, social, managerial, financial, and human resource factors. Moreover, integration technologies were categorized based on three levels of integration, which are data, application, and process. In addition, different integration approaches were identified and categorized based on their communication and platform. Also, different EC integration solutions were investigated and categorized based on the identified integration approaches. By considering different aspects of integration, this study is a great asset to the architectures, developers, and system integrators in order to integrate and adopt EC with enterprise systems.

The Finnish Electronic Library - Basic Research Infrastructure

Kristiina Hormia-Poutasen esitys KRE-konferenssissa 2013.

Characterisation of waste for combustion : with special reference to the role of zinc

Waste combustion has gone from being a volume reducing discarding-method to an energy recovery process for unwanted material that cannot be reused or recycled. Different fractions of waste are used as fuel today, such as; municipal solid waste, refuse derived fuel, and solid recovered fuel. Furthermore, industrial waste, normally a mixture between commercial waste and building and demolition waste, is common, either as separate fuels or mixed with, for example, municipal solid waste. Compared to fossil or biomass fuels, waste mixtures are extremely heterogeneous, making it a complicated fuel. Differences in calorific values, ash content, moisture content, and changing levels of elements, such as Cl and alkali metals, are common in waste fuel. Moreover, waste contains much higher levels of troublesome trace elements, such as Zn, which is thought to accelerate a corrosion process. Varying fuel quality can be strenuous on the boiler system and may cause fouling and corrosion of heat exchanger surfaces. This thesis examines waste fuels and waste combustion from different angles, with the objective of giving a better understanding of waste as an important fuel in today’s fuel economy. Several chemical characterisation campaigns of waste fuels over longer time periods (10-12 months) was used to determine the fossil content of Swedish waste fuels, to investigate possible seasonal variations, and to study the presence of Zn in waste. Data from the characterisation campaigns were used for thermodynamic equilibrium calculations to follow trends and determine the effect of changing concentrations of various elements. The thesis also includes a study of the thermal behaviour of Zn and a full—scale study of how the bed temperature affects the volatilisation of alkali metals and Zn from the fuel. As mixed waste fuel contains considerable amounts of fresh biomass, such as wood, food waste, paper etc. it would be wrong to classify it as a fossil fuel. When Sweden introduced waste combustion as a part of the European Union emission trading system in the beginning of 2013 there was a need for combustion plants to find a usable and reliable method to determine the fossil content. Four different methods were studied in full-scale of seven combustion plants; 14Canalysis of solid waste, 14C-analysis of flue gas, sorting analysis followed by calculations, and a patented balance method that is using a software program to calculate the fossil content based on parameters from the plant. The study showed that approximately one third of the coal in Swedish waste mixtures has fossil origins and presented the plants with information about the four different methods and their advantages and disadvantages. Characterisation campaigns also showed that industrial waste contain higher levels of trace elements, such as Zn. The content of Zn in Swedish waste fuels was determined to be approximately 800 mg kg-1 on average, based on 42 samples of solid waste from seven different plants with varying mixtures between municipal solid waste and industrial waste. A review study of the occurrence of Zn in fuels confirmed that the highest amounts of Zn are present in waste fuels rather than in fossil or biomass fuels. In tires, Zn is used as a vulcanizing agent and can reach concentration values of 9600-16800 mg kg-1. Waste Electrical and Electronic Equipment is the second Zn-richest fuel and even though on average Zn content is around 4000 mg kg-1, the values of over 19000 mg kg-1 were also reported. The increased amounts of Zn, 3000-4000 mg kg-1, are also found in municipal solid waste, sludge with over 2000 mg kg-1 on average (some exceptions up to 49000 mg kg-1), and other waste derived fuels (over 1000 mg kg-1). Zn is also found in fossil fuels. In coal, the average level of Zn is 100 mg kg-1, the higher amount of Zn was only reported for oil shale with values between 20-2680 mg kg-1. The content of Zn in biomass is basically determined by its natural occurrence and it is typically 10-100 mg kg-1. The thermal behaviour of Zn is of importance to understand the possible reactions taking place in the boiler. By using thermal analysis three common Zn-compounds were studied (ZnCl2, ZnSO4, and ZnO) and compared to phase diagrams produced with thermodynamic equilibrium calculations. The results of the study suggest that ZnCl2(s/l) cannot exist readily in the boiler due to its volatility at high temperatures and its conversion to ZnO in oxidising conditions. Also, ZnSO4 decomposes around 680°C, while ZnO is relatively stable in the temperature range prevailing in the boiler. Furthermore, by exposing ZnO to HCl in a hot environment (240-330°C) it was shown that chlorination of ZnO with HCl gas is possible. Waste fuel containing high levels of elements known to be corrosive, for example, Na and K in combination with Cl, and also significant amounts of trace elements, such as Zn, are demanding on the whole boiler system. A full-scale study of how the volatilisation of Na, K, and Zn is affected by the bed temperature in a fluidised bed boiler was performed parallel with a lab-scale study with the same conditions. The study showed that the fouling rate on deposit probes were decreased by 20 % when the bed temperature was decreased from 870°C to below 720°C. In addition, the lab-scale experiments clearly indicated that the amount of alkali metals and Zn volatilised depends on the reactor temperature.

Insiders´ views as a predictor of stock performance : can insider trading be used to predict stock performance on the United States stock market?

This thesis studies the possibility of using information on insiders’ transactions to forecast future stock returns after the implementation of Sarbanes Oxley Act in July 2003. Insider transactions between July 2003 and August 2009 are analysed with regression tests to identify the relationships between insiders’ transactions and future stock returns. This analysis is complemented with rudimentary bootstrapping procedures to verify the robustness of the findings. The underlying assumption of the thesis is that insiders constantly receive pieces of information that indicate future performance of the company. They may not be allowed to trade on large and tangible pieces of information but they can trade on accumulation of smaller, intangible pieces of information. Based on the analysis in the thesis insiders’ profits were found not to differ from the returns from broad stock index. However, their individual transactions were found to be linked to future stock returns. The initial model was found to be unstable but some of the predictive power could be sacrificed to achieve greater stability. Even after sacrificing some predictive power the relationship was significant enough to allow external investors to achieve abnormal profits after transaction costs and taxes. The thesis does not go into great detail about timing of transactions. Delay in publishing insiders’ transactions is not taken into account in the calculations and the closed windows are not studied in detail. The potential effects of these phenomena are looked into and they do not cause great changes in the findings. Additionally the remuneration policy of an insider or a company is not taken into account even though it most likely affects the trading patterns of insiders. Even with the limitations the findings offer promising opportunities for investors to improve their investment processes by incorporating additional information from insiders’ transaction into their decisions. The findings also raise questions on how insider trading should be regulated. Insiders achieve greater returns than other investors based on superior information. On the other hand, more efficient information transfer could warrant more lenient regulation. The fact that insiders’ returns are dominated by the large investment stake they maintain all the time in their own companies also speaks for more leniency. As Sarbanes Oxley Act considerably modified the insider trading landscape, this analysis provides information that has not been available before. The thesis also constitutes a thorough analysis of insider trading phenomenon which has previously been somewhat separated into several studies.