A general design method for electric machines using magnetic circuit model considering the flux saturation problem

This paper proposes an analytical approach that is generalized for the design of various types of electric machines based on a physical magnetic circuit model. Conventional approaches have been used to predict the behavior of electric machines but have limitations in accurate flux saturation analysis and hence machine dimensioning at the initial design stage. In particular, magnetic saturation is generally ignored or compensated by correction factors in simplified models since it is difficult to determine the flux in each stator tooth for machines with any slot-pole combinations. In this paper, the flux produced by stator winding currents can be calculated accurately and rapidly for each stator tooth using the developed model, taking saturation into account. This aids machine dimensioning without the need for a computationally expensive finite element analysis (FEA). A 48-slot machine operated in induction and doubly-fed modes is used to demonstrate the proposed model. FEA is employed for verification.

Optimal design of building structures using genetic algorithms

A general framework for multi-criteria optimal design is presented which is well-suited for automated design of structural systems. A systematic computer-aided optimal design decision process is developed which allows the designer to rapidly evaluate and improve a proposed design by taking into account the major factors of interest related to different aspects such as design, construction, and operation.

The proposed optimal design process requires the selection of the most promising choice of design parameters taken from a large design space, based on an evaluation using specified criteria. The design parameters specify a particular design, and so they relate to member sizes, structural configuration, etc. The evaluation of the design uses performance parameters which may include structural response parameters, risks due to uncertain loads and modeling errors, construction and operating costs, etc. Preference functions are used to implement the design criteria in a "soft" form. These preference functions give a measure of the degree of satisfaction of each design criterion. The overall evaluation measure for a design is built up from the individual measures for each criterion through a preference combination rule. The goal of the optimal design process is to obtain a design that has the highest overall evaluation measure - an optimization problem.

Genetic algorithms are stochastic optimization methods that are based on evolutionary theory. They provide the exploration power necessary to explore high-dimensional search spaces to seek these optimal solutions. Two special genetic algorithms, hGA and vGA, are presented here for continuous and discrete optimization problems, respectively.

The methodology is demonstrated with several examples involving the design of truss and frame systems. These examples are solved by using the proposed hGA and vGA.

An integrated design approach to power systems : from power flows to electricity markets

Power system is at the brink of change. Engineering needs, economic forces and environmental factors are the main drivers of this change. The vision is to build a smart electrical grid and a smarter market mechanism around it to fulfill mandates on clean energy. Looking at engineering and economic issues in isolation is no longer an option today; it needs an integrated design approach. In this thesis, I shall revisit some of the classical questions on the engineering operation of power systems that deals with the nonconvexity of power flow equations. Then I shall explore some issues of the interaction of these power flow equations on the electricity markets to address the fundamental issue of market power in a deregulated market environment. Finally, motivated by the emergence of new storage technologies, I present an interesting result on the investment decision problem of placing storage over a power network. The goal of this study is to demonstrate that modern optimization and game theory can provide unique insights into this complex system. Some of the ideas carry over to applications beyond power systems.

Factors affecting the susceptibility of salmonid fish to disease

A review article discussing the degree of susceptibility of fish to outbreaks of disease and whether, besides from changes in the physical and chemical characteristics of the environment, this susceptibility is instrumental in determining whether or not pathogenic challenge results in disease. The article summarises a decade of work on this subject at the Windermere laboratory of the Freshwater Biological Association and suggests possible directions for future research. The article covers experimental design, effects of environmental stress (including discussion on the hypothalamic-pituitary-interrenal (HPI) axis in salmonid fish), sexual maturation, research areas for future development and evolutionary considerations. There are a number of accompanying figures and images.

Design and control of an ultraprecision stage used in grating tiling

In petawatt laser system, the gratings used to compose pulse compressor are very large in size which can be only acquired currently by arraying small aperture gratings to form a large one instead, an approach referred to as grating tiling. Theory and experiments have demonstrated that the coherent addition of multiple small gratings to form a larger grating is viable, the key technology of which is to control the relative position and orientation of each grating with high precision. According to the main factors that affect the performance of the grating tiling, a 5-DOF ultraprecision stage is developed for the grating tiling experiment. The mechanism is formed by serial structures. The motion of the mechanism is guided by flexure hinges and driven by piezoelectric actuators and the movement resolution of which can achieve nanometer level. To keep the stability of the mechanism, capacitive position sensors with nanometer accuracy are fixed on it to provide feedback signals with which to realize closed-loop control, thus the positioning precision of the mechanism is within several nanometers range through voltage control and digital PID algorithm. Results of experiments indicate that the performance of the mechanism can meet the requirement of precision for grating tiling.}

Uptake and factors that influence the use of 'sit less, move more' occupational intervention strategies in Spanish office employees

Background: Little is known about the types of 'sit less, move more' strategies that appeal to office employees, or what factors influence their use. This study assessed the uptake of strategies in Spanish university office employees engaged in an intervention, and those factors that enabled or limited strategy uptake. Methods: The study used a mixed method design. Semi-structured interviews were conducted with academics and administrators (n = 12; 44 +/- 12 mean SD age; 6 women) at three points across the five-month intervention, and data used to identify factors that influenced the uptake of strategies. Employees who finished the intervention then completed a survey rating (n = 88; 42 +/- 8 mean SD age; 51 women) the extent to which strategies were used [never (1) to usually (4)]; additional survey items (generated from interviewee data) rated the impact of factors that enabled or limited strategy uptake [no influence (1) to very strong influence (4)]. Survey score distributions and averages were calculated and findings triangulated with interview data. Results: Relative to baseline, 67% of the sample increased step counts post intervention (n = 59); 60% decreased occupational sitting (n = 53). 'Active work tasks' and 'increases in walking intensity' were the strategies most frequently used by employees (89% and 94% sometimes or usually utilised these strategies); 'walk-talk meetings' and ` lunchtime walking groups' were the least used (80% and 96% hardly ever or never utilised these strategies). 'Sitting time and step count logging' was the most important enabler of behaviour change (mean survey score of 3.1 +/- 0.8); interviewees highlighted the motivational value of being able to view logged data through visual graphics in a dedicated website, and gain feedback on progress against set goals. 'Screen based work' (mean survey score of 3.2 +/- 0.8) was the most significant barrier limiting the uptake of strategies. Inherent time pressures and cultural norms that dictated sedentary work practices limited the adoption of 'walk-talk meetings' and ` lunch time walking groups'. Conclusions: The findings provide practical insights into which strategies and influences practitioners need to target to maximise the impact of 'sit less, move more' occupational intervention strategies.

Métodos e técnicas de Design Centrado no Usuário: um levantamento a partir da usabilidade de produtos do CTIC/Fiocruz

A relação causal entre métodos de projeto e a usabilidade de produtos de comunicação e informação foi o tema desse estudo que buscou identificar o estado da arte sobre um processo de projeto que resulte em mais usabilidade na web. A partir dessa identificação, avaliou-se as melhorias que poderiam ser adotadas nos processos de desenvolvimento de interfaces utilizados por uma equipe específica da Fundação Oswaldo Cruz (CTIC - Fiocruz). Entendeu-se que um método de projeto deve estar atualizado em relação aos conhecimentos de áreas como a Ergonomia, a Interação Humano-computador e o Design de Interação. Para isso, adotou-se a hipótese de que o processo de projeto deve combinar três aspectos: a) um significativo envolvimento do usuário ao longo do processo; b) o uso de sucessivas iterações para configurar o produto e c) uma combinação mínima de técnicas relacionadas a objetivos específicos de cada fase de uma abordagem de Design Centrado no Usuário. Para contribuir com o desenvolvimento de métodos e técnicas que melhorem a usabilidade, descreveu-se as características dos métodos registrados na literatura e praticados por profissionais externos à Fundação Oswaldo Cruz (Fiocruz). A partir dessas informações, o estudo direcionou-se para o segundo objetivo específico: identificar melhorias nos métodos e técnicas aplicáveis no caso do CTIC Fiocruz. Através da combinação da revisão de literatura e da pesquisa de campo foram produzidas informações sobre tipos de fluxo dos métodos, tipos de envolvimento dos usuários, quantidade e gravidade de problemas de usabilidade observadas pelos profissionais e a validade de base geral de método para diferentes produtos. A primeira rodada de entrevista foi realizada para melhor entender o contexto da hipótese e a relação entre suas variáveis. A segunda rodada identificou as características do processo de projeto utilizado no CTIC. A partir dessas informações, aplicou-se duas técnicas com profissionais externos. Um questionário on-line foi utilizado para levantar informações bem específicas, em sua maioria de características quantitativas. A última técnica aplicada foi um card sorting on-line que apresentou um caso de projeto em que os profissionais indicaram quais técnicas seriam utilizadas diante de dois cenários diferentes: um mais favorável e outro restritivo. A análise demonstrou que a maioria dos profissionais acredita que os problemas de usabilidade são consequência da falta de determinadas abordagens e técnicas. Por isso, esses profissionais combinam fluxos iterativos com um significativo envolvimento do usuário no processo. Foram sugeridas melhorias para o método utilizado no CTIC sintetizadas através de um processo de Design Centrado no Usuário como ponto de partida que aplica o conceito tradicional de usabilidade (performance). Assim que possível, esse processo deve ser aperfeiçoado ao incluir o conceito de experiência do usuário que considera também os aspectos emocionais e hedonômicos na interação.

The design and construction of flat rectangular otter boards for bottom trawling: a review

The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.

Study on the critical submergence of surface vortices and the design of anti-vortex intakes

Surface vortex behavior in front of the tunnel intake was investigated in this paper. The critical submergence of vortex was discussed based on the concept of 'critical spherical sink surface' (CSSS). The vortex formation and evolution at the tunnel intake were analyzed based on the theory of CSSS considering the effect of circulation. A theory was proposed to explain the surface vortex. The theoretical development was verified by the physical model experiments of Xiluodu hydropower station. The radial velocity and vortex circulation were considered as the main factors that influence the formation and evolution of surface vortex. Finally, an anti-vortex intake configuration was proposed to weaken the air-core vortex in front of the tunnel intakes of the hydraulic structures. © 2011 Science China Press and Springer-Verlag Berlin Heidelberg.

Design considerations for trawl winches

For efficient functioning of a trawl winch it is essential that all component parts should be designed carefully taking into consideration all the relevant factors such as quantum and type of load each component is subjected to, amount of maintenance it will receive during actual operation, type of drive for the winch etc. Based on the practices adopted at the Central Institute of Fisheries Technology certain guidelines are proposed in this paper for designing of trawl winches.

The study of Indian shrimp larvae feeding by enriched rotifer with vitamin C and unsaturated fatty acid (epa, dha) and its effects on growth factors, survival rate and environmental stresses

In this experiment, the feeding of Indian white shrimp larvae by unenriched rotifers (treatment 1) and enriched with highly unsaturated fatty acid (treatment 2) and highly unsaturated fatty acid along with vitamin C (treatment 3) on the growth factors, survival and resistance against salinity and formalin stress tests were studied and their differences with control treatment including newly hatched Artemia nauplii is compared. In this the study four treatments in a completely randomized design with 3 replicates per treatment were used. Farming of shrimp larvae of Zoea II to postlarvae 5 was done in 20 liter plastic bucket. Present results indicated that growth factors and survival rate of stage Zoea II to postlarvae 1 in treatments 1, 2 and 3 improve rather than control in which this case was due to optimal size rotifer rather than Artemia nauplii. Also, treatments 2 and 3 feeding with oil liver cod emulsion enriched rotifer have the highest concentration of DHA (mg/g DW) and the ratio DHA/EPA in which due to have shown the highest growth factors and a significant difference (P<0.05) with treatments 1 and control. The highest survival at stage PL1 were observed in treatment 3 that was enriched with ascorbyl palmitate in which have to the synergistic properties of vitamin C rather than treatments 2, 1 and control and showed a significant difference (P<0.05). But in stage PL5 the highest amount of growth and survival rates were related to control treatment which showed a significant difference (P<0.05) with other treatments that control has higher size rather than treatments 1, 2 and 3. Also, among experiment treatments that the two treatments 2 and 3 due to enrichment had higher growth and survival rates compared with treatment 1 in which their differences have also been significant (P<0.05). In the case of stress tests, results indicated that the highest survival rate has been reported when specimens were offered a diet containing high levels of highly unsaturated fatty acids with vitamin C. So that in stage PL1 in the salinity stress tests 10 and 20 ppt the highest survival rate was observed in treatment 3. As for the second, treatment 2 showed a significant difference (P<0.05) with treatment 3. It is worth mentioning that treatment 3 showed a higher survival rate compared to treatment 2 due to the synergistic properties of vitamin C. The difference between these two treatments with treatment 1 and control was also significant. No significant difference was observed in formalin stress test 100 ppm in this stage between treatments 3 and 2 which shows the highest survival rate. But their difference with treatments 1 and control was significant (P<0.05). Also, in stage PL5 in the salinity stress tests 10 and 20 ppt the highest survival rate was observed in treatment 3 which showed no significant difference (P<0.05) with control treatment. While their difference in the amount of survival rate with treatment 1 and 2 was significant (P<0.05). In this stage, the highest observed survival rate in formalin stress test 100 ppm included treatments control, 3 and 2 among which there were no significant differences (P<0.05). While the difference between these three treatments with treatment 1 was significant.