Identification of acetates in elasmopalpulus lignosellus pheromone glands using a newly created mass spectral database and kóvats retention indices

Based on a specially created mass spectral database utilizing 23 tetradecenyl and 22 hexadecenyl acetate standards along with Kóvats retention indices obtained on a very polar stationary phase [poly (biscyanopropyl siloxane)] (SP 2340), (Z)-9-hexadecenyl acetate, (Z)-11-hexadecenyl acetate and (E)-8-hexadecenyl acetate were identified in active pheromone extracts of Elasmopalpus lignosellus. This identification was more efficient than our previous study using gas chromatography/mass spectrometry with a dimethyl disulfide derivative where we could only identify the first two acetates. The acetate composition of the pheromone gland differed from region to region in Brazil and from that from the Tifton (GA, USA) population, suggesting polymorphism or a different sub-species.

Database of the Amazon aromatic plants and their essential oils

The aromatic flora of the Amazon has been inventoried for 30 years. In this sense, were made over 500 field trips to collect over 2500 plants and to obtain more than 2000 essential oils and aroma concentrates, all of them submitted to GC and GC-MS. This work led to the creation of a database for the aromatic plants of the Amazon, which catalogs general information about 1250 specimens. The database has allowed the publication of the chemical composition of the oils and aromas of more than 350 species, associated with a larger number of chemical types. The essential oils of many species offer optimum conditions for economic exploitation and use in national and international market of fragrances, cosmetics, agricultural and household pesticides.

De interfaces tecnológicas e rascunhos de experiências

Discutem-se os efeitos de Internet sem fio, câmeras de vigilância, telas enormes de televisão em estações de metrô e tocadores de mp3 sobre a freqüentação dos espaços públicos, por meio da análise de alguns resultados do uso desses aparatos no cotidiano (e mesmo nas estratégias de planejamento) das cidades. Quando à experimentação do espaço arquitetônico (visível) faz-se somar uma rede (invisível) reconfiguradora de relações individuais e coletivas com os lugares, e o conceito de participação chega a uma condição limítrofe, exigindo perguntar até que ponto a materialidade da arquitetura é um componente necessário à transformação da experiência que está em curso.

O núcleo de estudos em Filosofia e Saúde da Fundação Educacional Serra dos Órgãos: interfaces na formação médica

Nos últimos anos, inúmeros problemas surgiram na área da saúde em decorrência, sobretudo, dos avanços ocorridos no campo das biotecnociências. Percebendo-se a exigüidade de espaço, no atual currículo médico, para a discussão de muitas dessas questões, alunos e professores da Fundação Educacional Serra dos Órgãos (FESO) propuseram a criação do Núcleo de Estudos em Filosofia e Saúde (NEFISA), espaço destinado a fomentar o debate, o ensino e a pesquisa sobre os assuntos que tenham sua emergência na interface da Filosofia com a Medicina e a Saúde. O escopo do presente artigo é apresentar o trabalho desenvolvido no NEFISA-FESO.

Meio ambiente e saúde no Programa PET-Saúde: interfaces na atenção básica

A degradação ambiental vem modificando nosso cenário de forma acelerada, interferindo negativamente no processo saúde-doença. É essencial discutir a temática saúde ambiental com profissionais de saúde, sendo o Programa PET-Saúde um facilitador, e as unidades de Estratégia de Saúde da Família (ESF) um excelente cenário. Propõe-se analisar a percepção de profissionais de saúde e usuários sobre a temática em duas unidades de ESF (Botucatu/SP) e sensibilizá-los por meio de discussões teóricas e vivências. Foram entrevistados 45 profissionais e 36 usuários, sendo 21 indicados pelos agentes comunitários de saúde como tendo boa relação com o meio ambiente e 15 indicados por não apresentarem boa relação com o mesmo. Aplicou-se o referencial da metodologia qualitativa, utilizando-se o Discurso do Sujeito Coletivo. Todos demonstraram ter consciência dos problemas ambientais e de saúde e o que poderia ser feito para melhorar a situação, mas são raras as ações realizadas nas unidades. Reforça-se a necessidade de capacitar equipes em Saúde Ambiental, estimulando a adoção de práticas transdisciplinares que superem as práticas assistencialistas e caminhem no sentido da promoção, além de empoderar a população para lutar e ser responsável por um meio ambiente mais equilibrado, melhorando a qualidade de vida.

Georeferenced database generation with the purpose of hydrologic molding in reservoirs of the hydrographic basin of Jaguaribe river in the state of Ceará, Brazil

The edafoclimatic conditions of the Brazilian semiarid region favor the water loss by surface runoff. The state of Ceará, almost completely covered by semiarid, has developed public policies for the construction of dams in order to attend the varied water demand. Several hydrological models were developed to support decisive processes in the complex management of reservoirs. This study aimed to establish a methodology for obtaining a georeferenced database suitable for use as input data in hydrological modeling in the semiarid of Ceará. It was used images of Landsat satellite and SRTM Mission, and soil maps of the state of Ceará. The Landsat images allowed the determination of the land cover and the SRTM Mission images, the automatic delineation of hydrographic basins. The soil type was obtained through the soil map. The database was obtained for Jaguaribe River hydrographic basin, in the state of Ceará, and is applicable to hydrological modeling based on the Curve Number method for estimating the surface runoff.

Tietokantojen yhdistäminen järjestelmän rajapintoja hyödyntäen

Tässä työssä on pyritty kartoittamaan mahdollisuudet omatoimiseen Voyager-kirjastojärjestelmän aineistotietokantojen ja asiakasrekisterien yhdistelyyn. Lähtökohtana on ollut oletus, että kohdejärjestelmän tietokantaan ei ole oikeuksia eikä sopimusteknistä mahdollisuuttakaan kirjoittaa tietoja suoraan kyselykielellä. Järjestelmän dokumentaatiota sekä verkostoa hyödyntämällä olen pyrkinyt kartoittamaan mahdollisuudet kaiken toiminnallisuuden vaatiman datan siirtoon. Hyödyntämällä järjestelmän rajapintoja, voidaan saavuttaa kustannussäästöjä sekä joustavuutta työn suorittamisen aikataulutukseen. Bibliografisen datan siirtoon Voyager-kirjastojärjestelmässä on mahdollisuus hyödyntää palvelimella eräajona suoritettavaa ohjelmaa. Tässä eräajossa voidaan siirtää sekä bibliografiset tietueet että varastotietueet. Nidetietojen kirjoittamiseksi kohteena olevaan tietokantaan käytetään Visual Studio -sovellusta, joka hyödyntää luettelointirajapintaa. Asiakastietojen siirtoon on mahdollista hyödyntää palvelimella suoritettavaa eräajoa, jonka syötteeksi kirjoitetaan määrämittainen syötetiedosto. Asiakastietueisiin sidotut lainatiedot voidaan siirtää kohdetietokantaan asiakasohjelman offline-lainaustoiminnolla.

Research and development of III-V semiconductor surfaces for improved device interfaces

This thesis is devoted to understanding and improving technologically important III-V compound semiconductor (e.g. GaAs, InAs, and InSb) surfaces and interfaces for devices. The surfaces and interfaces of crystalline III-V materials have a crucial role in the operation of field-effect-transistors (FET) and highefficiency solar-cells, for instance. However, the surfaces are also the most defective part of the semiconductor material and it is essential to decrease the amount of harmful surface or interface defects for the next-generation III-V semiconductor device applications. Any improvement in the crystal ordering at the semiconductor surface reduces the amount of defects and increases the material homogeneity. This is becoming more and more important when the semiconductor device structures decrease to atomic-scale dimensions. Toward that target, the effects of different adsorbates (i.e., Sn, In, and O) on the III-V surface structures and properties have been investigated in this work. Furthermore, novel thin-films have been synthesized, which show beneficial properties regarding the passivation of the reactive III-V surfaces. The work comprises ultra-high-vacuum (UHV) environment for the controlled fabrication of atomically ordered III-V(100) surfaces. The surface sensitive experimental methods [low energy electron diffraction (LEED), scanning tunneling microscopy/spectroscopy (STM/STS), and synchrotron radiation photoelectron spectroscopy (SRPES)] and computational density-functionaltheory (DFT) calculations are utilized for elucidating the atomic and electronic properties of the crucial III-V surfaces. The basic research results are also transferred to actual device tests by fabricating metal-oxide-semiconductor capacitors and utilizing the interface sensitive measurement techniques [capacitance voltage (CV) profiling, and photoluminescence (PL) spectroscopy] for the characterization. This part of the thesis includes the instrumentation of home-made UHV-compatible atomic-layer-deposition (ALD) reactor for growing good quality insulator layers. The results of this thesis elucidate the atomic structures of technologically promising Sn- and In-stabilized III-V compound semiconductor surfaces. It is shown that the Sn adsorbate induces an atomic structure with (1×2)/(1×4) surface symmetry which is characterized by Sn-group III dimers. Furthermore, the stability of peculiar ζa structure is demonstrated for the GaAs(100)-In surface. The beneficial effects of these surface structures regarding the crucial III-V oxide interface are demonstrated. Namely, it is found that it is possible to passivate the III-V surface by a careful atomic-scale engineering of the III-V surface prior to the gate-dielectric deposition. The thin (1×2)/(1×4)-Sn layer is found to catalyze the removal of harmful amorphous III-V oxides. Also, novel crystalline III-V-oxide structures are synthesized and it is shown that these structures improve the device characteristics. The finding of crystalline oxide structures is exploited by solving the atomic structure of InSb(100)(1×2) and elucidating the electronic structure of oxidized InSb(100) for the first time.

Primary and Revision Hip Replacement. A University Hospital Database and Registry Study

Large-headed total hip arthroplasty (THA) and hip resurfacing arthroplasty (HRA) with metal-on-metal (MoM) bearings became popular during the last decade. Recently, it has become evident that the large-head MoM hip implants are associated with increased revision rates despite their theoretical advantages. The purpose of this study was to evaluate the early results of primary MoM hip replacements and of acetabular revisions. I analyzed retrospectively the results of four MoM implant designs and the survival rate of acetabular revisions with impaction bone grafting, as documented in the Turku University Hospital database. Further, I evaluated the correlation between femoral head size and dislocation rate, and used the Finnish Arthroplasty Register data to compare the survival of three large-head MoM THAs to analogous HRAs. The early results for the Magnum M2A–ReCap THA were good. A larger head size decreased the risk of dislocation. Articular surface replacement (ASR) THA yielded inferior results compared to analogous HRA. For two other designs the results were similar. The R3–Synergy THA yielded inferior results compared to the reference implants. The survival of acetabular reconstructions with impaction bone grafting was inferior compared to previous reports. In conclusion, the early results of the Biomet ReCap–Magnum design were promising, and large head sizes decreased the dislocation rate. The survival of different MoM hip implant designs varied. The survival of new designs and techniques may be inferior to those reported by the clinics where implants are developed. An important caveat is that early promising results of new devices may rapidly worsen. New implants need to be introduced in a controlled fashion to the market; here, arthroplasty registers are a valuable tool that needs to be used.

Improving reporting management with relational database management system

Data management consists of collecting, storing, and processing the data into the format which provides value-adding information for decision-making process. The development of data management has enabled of designing increasingly effective database management systems to support business needs. Therefore as well as advanced systems are designed for reporting purposes, also operational systems allow reporting and data analyzing. The used research method in the theory part is qualitative research and the research type in the empirical part is case study. Objective of this paper is to examine database management system requirements from reporting managements and data managements perspectives. In the theory part these requirements are identified and the appropriateness of the relational data model is evaluated. In addition key performance indicators applied to the operational monitoring of production are studied. The study has revealed that the appropriate operational key performance indicators of production takes into account time, quality, flexibility and cost aspects. Especially manufacturing efficiency has been highlighted. In this paper, reporting management is defined as a continuous monitoring of given performance measures. According to the literature review, the data management tool should cover performance, usability, reliability, scalability, and data privacy aspects in order to fulfill reporting managements demands. A framework is created for the system development phase based on requirements, and is used in the empirical part of the thesis where such a system is designed and created for reporting management purposes for a company which operates in the manufacturing industry. Relational data modeling and database architectures are utilized when the system is built for relational database platform.

The GATO gene annotation tool for research laboratories

Large-scale genome projects have generated a rapidly increasing number of DNA sequences. Therefore, development of computational methods to rapidly analyze these sequences is essential for progress in genomic research. Here we present an automatic annotation system for preliminary analysis of DNA sequences. The gene annotation tool (GATO) is a Bioinformatics pipeline designed to facilitate routine functional annotation and easy access to annotated genes. It was designed in view of the frequent need of genomic researchers to access data pertaining to a common set of genes. In the GATO system, annotation is generated by querying some of the Web-accessible resources and the information is stored in a local database, which keeps a record of all previous annotation results. GATO may be accessed from everywhere through the internet or may be run locally if a large number of sequences are going to be annotated. It is implemented in PHP and Perl and may be run on any suitable Web server. Usually, installation and application of annotation systems require experience and are time consuming, but GATO is simple and practical, allowing anyone with basic skills in informatics to access it without any special training. GATO can be downloaded at [http://mariwork.iq.usp.br/gato/]. Minimum computer free space required is 2 MB.

A SOA-based Framework for Multi-Devices and Multi-Platform User Interfaces

This thesis reports investigations on applying the Service Oriented Architecture (SOA) approach in the engineering of multi-platform and multi-devices user interfaces. This study has three goals: (1) analyze the present frameworks for developing multi-platform and multi-devices applications, (2) extend the principles of SOA for implementing a multi-platform and multi-devices architectural framework (SOA-MDUI), (3) applying and validating the proposed framework in the context of a specific application. One of the problems addressed in this ongoing research is the large amount of combinations for possible implementations of applications on different types of devices. Usually it is necessary to take into account the operating system (OS), user interface (UI) including the appearance, programming language (PL) and architectural style (AS). Our proposed approach extended the principles of SOA using patterns-oriented design and model-driven engineering approaches. Synthesizing the present work done in these domains, this research built and tested an engineering framework linking Model-driven Architecture (MDA) and SOA approaches to developing of UI. This study advances general understanding of engineering, deploying and managing multi-platform and multi-devices user interfaces as a service.

Searching for music archives and composition manuscripts from the Viola database

Music archives and composition manuscripts from the Viola database.