Prova estética e funcional: uma decisão em conjunto

An important phase of rehabilitation treatment, is the aesthetic and functional testing, performed with the patient. Its relevance is because at this time it’s possible to have a very faithful preview of the final result of the prosthesis, but, if necessary, still allow changes. Therefore, the objective of this review is to describe didactically the clinical steps and factors that should be examined by the dentist at the moment of aesthetic and functional testing of a complete denture. This clinical stage basically involves four requirements to be analyzed: mechanical, functional, aesthetic and phonetic. After the jointly analysis with all the requirements, the patient must approve, preferably in writing, the completion of the prosthesis. In case of need for any changes, this is when it should be performed, followed by new aesthetic and functional testing. It should be noted that the patient’s opinion is always sovereign in deciding to end the denture.

Aportes teóricos e metodológicos para a constituição de um grupo de planejamento conjunto com docentes da licenciatura em física

We present in this paper parts of the results of a research that had the intention to promote a space of communicative interaction among teachers of an undergraduate Course of Physics Teaching so they could plan their courses together. From the theoretical recommendations of the Theory of Communicative Action , by Jürgen Habermas , it was possible to draw a way of rationality crisis in training degree in physics in Brazil and then propose the creation of a Joint Planning Group (JPG) with teachers of specific nature disciplines of physics and disciplines about physics teaching. They start a joint discussion about the relationship among the disciplines in delivering of a project for future high school teachers' training. All meetings developed over a school year in the GPC were recorded, transcribed and analyzed with a part of a methodological analysis feature of the intersubjective interactions. This methodology was developed specifically for the research. The conclusions are related to the joint constructions developed by the JPG, its local contexts and the possibility of extension of this group. The joint constructions undertaken in the group point to the defense of the formation of JPG in the formation of the professors who teach these courses.

Formalização do conjunto dos números racionais e alguns jogos com frações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Termodinâmica de um conjunto de partículas em um bilhar bidimensional dependente do tempo: um gás bidimensional simplificado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sobre a dimensão do quadrado de um espaço métrico compacto X de dimensão n e o conjunto dos mergulhos de X em R2n

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo da terminologia de atas de assembleias brasileiras e francesas e proposta de glossário adequado a esse conjunto terminológico

Pós-graduação em Estudos Linguísticos - IBILCE

Análise estrutural do conjunto de palhetas de um aerador da estação de tratamento de efluentes

This work aims to find the maximum tension in a group of blades in a Sewage Treatment Stations in a company located in Vale do Paraíba. First, the calculations of the strength requested by the effluents on the structure are done, and the optimum torque of the frame screws is researched. From these data, static simulations using appropriate software and the finite elements method are performed. Based on the results, a possible solution to reduce the strength in this structure is proposed. This study will be provided as a consultation material to the company

Introdução à identificação de sistemas utilizando o System Identification Toolbox do MATLAB em conjunto com o Arduino para o laboratório de controle linear

The education designed and planned in a clear and objective manner is of paramount importance for universities to prepare competent professionals for the labor market, and above all can serve the population with an efficient work. Specifically, in relation to engineering, conducting classes in the laboratories it is very important for the application of theory and development of the practical part of the student. The planning and preparation of laboratories, as well as laboratory equipment and activities should be developed in a succinct and clear way, showing to students how to apply in practice what has been learned in theory and often shows them why and where it can be used when they become engineers. This work uses the MATLAB together with the System Identification Toolbox and Arduino for the identification of linear systems in Linear Control Lab. MATLAB is a widely used program in the engineering area for numerical computation, signal processing, graphing, system identification, among other functions. Thus the introduction to MATLAB and consequently the identification of systems using the System Identification Toolbox becomes relevant in the formation of students to thereafter when necessary to identify a system the base and the concept has been seen. For this procedure the open source platform Arduino was used as a data acquisition board being the same also introduced to the student, offering them a range of software and hardware for learning, giving you every day more luggage to their training

Desenvolvimento de conjunto membrana-eletrodos para célula a combustível de metanol direto passiva

Direct methanol fuel cells (DMFCs) without external pumps or other ancillary devices for fuel and oxidant supply are known as passive DMFCs and are potential candidates to replace lithium-ion batteries in powering portable electronic devices. This paper presents the results obtained from a membrane electrode assembly (MEA) specifically designed for passive DMFCs. Appropriated electrocatalysts were prepared and the effect of their loadings was investigated. Two types of gas diffusion layers (GDL) were also tested. The influence of the methanol concentration was analyzed in each case. The best MEA performance presented a maximum power density of 11.94 mW cm^-2.

Análise estrutural do conjunto de palhetas de um aerador da estação de tratamento de efluentes

This work aims to find the maximum tension in a group of blades in a Sewage Treatment Stations in a company located in Vale do Paraíba. First, the calculations of the strength requested by the effluents on the structure are done, and the optimum torque of the frame screws is researched. From these data, static simulations using appropriate software and the finite elements method are performed. Based on the results, a possible solution to reduce the strength in this structure is proposed. This study will be provided as a consultation material to the company

Introdução à identificação de sistemas utilizando o System Identification Toolbox do MATLAB em conjunto com o Arduino para o laboratório de controle linear

The education designed and planned in a clear and objective manner is of paramount importance for universities to prepare competent professionals for the labor market, and above all can serve the population with an efficient work. Specifically, in relation to engineering, conducting classes in the laboratories it is very important for the application of theory and development of the practical part of the student. The planning and preparation of laboratories, as well as laboratory equipment and activities should be developed in a succinct and clear way, showing to students how to apply in practice what has been learned in theory and often shows them why and where it can be used when they become engineers. This work uses the MATLAB together with the System Identification Toolbox and Arduino for the identification of linear systems in Linear Control Lab. MATLAB is a widely used program in the engineering area for numerical computation, signal processing, graphing, system identification, among other functions. Thus the introduction to MATLAB and consequently the identification of systems using the System Identification Toolbox becomes relevant in the formation of students to thereafter when necessary to identify a system the base and the concept has been seen. For this procedure the open source platform Arduino was used as a data acquisition board being the same also introduced to the student, offering them a range of software and hardware for learning, giving you every day more luggage to their training

Principais conclusões do workshop conjunto dos programas FAPESP BIOTA-BIOEN-mudanças climáticas: ciência e políticas públicas para uma economia mais verde, no contexto da RIO+20

Este Ponto de Vista resume as conclusões de um Workshop conjunto, organizado pelos três Programas da FAPESP na Área Ambiental - BIOTA (O Instituto Virtual da Biodiversidade) - BIOEN (Pesquisa em Bioenergia) - Mudanças Climáticas, para discutir a contribuição da comunidade científica para a RIO+20, a Conferência das Nações Unidas para o Desenvolvimento Sustentável. O grupo de pesquisadores brasileiros reunidos pela FAPESP no início de março de 2012 levantou as seguintes preocupações: a) o número reduzido de oportunidades para a comunidade científica interagir com Conferências como a RIO+20; b) as graves deficiências do ZeroDraft, documento produzido pela Divisão das Nações Unidas para o Desenvolvimento Sustentável para a RIO +20; c) o fato do foco de pesquisa dos três Programas de Pesquisa Ambiental da FAPESP - biodiversidade, bioenergia e mudanças climáticas - não estarem na pauta das discussões da RIO+20; d) que pouca ênfase é dada aos oceanos na Agenda da Conferência; e) em relação aos mecanismos de mercado associados com a transição para uma economia mais verde, a necessidade de enfatizar a redução de subsídios perversos e a promoção de incentivos econômicos para atividades ou processos de mitigação e/ou seqüestro de carbono; f) a necessidade de estimular o desenvolvimento e a consolidação da pesquisa na área de avaliação e valoração de serviços ambientais, no Brasil. Os participantes do Workshop reconheceram a necessidade de aprofundar o conhecimento sobre as convenções, tratados e acordos internacionais assinados e ratificados pelo Brasil, bem como as instituições internacionais, programas e iniciativas que promovem a participação da comunidade científica no debate de políticas ambientais globais. Finalmente, do ponto de vista dos três programas da FAPESP dois pontos foram destacados: a) que é imperativo aprofundar o conhecimento científico em cada uma das três áreas focais - biodiversidade, bioenergia e mudanças climáticas - porque é necessário aumentar a massa crítica de pesquisadores e do conhecimento para participar das discussões internacionais nessas áreas estratégicas; b) também é imperativo apoiar e promover projetos de pesquisa que integrem as áreas focais dos três programas, estimulando a constituição de equipes inter e transdisciplinares. Esta é uma tendência mundial na área das mudanças ambientais globais, e os participantes dos três programas sentem que podem dar uma contribuição significativa para o avanço do conhecimento, para o debate internacional e para a efetiva solução dos problemas.