An Assessment of Fishery Yields from the East China Sea Ecosystem

A first assessment ofimportant East China Sea fisheries was carried out using data from 1956 to 1993. Two different data sets were available: 1) catch and effort data taken from landings and boat registrations and 2) catch and effort data from skipper's logs taken at sea. The two sets provided similar trends in CPUE over the study period. Stocks of high value, low volume species have been fished heavily and now produce very low landings or have been depleted (e.g. small and large yellow croaker). Some high volume and low value species have also been heavily fished (e.g. green filefish) while others (e.g. hairtail) are still producing high landings. Surplus production models were fitted to seven stocks. All showed considerable fluctuations in landings around MSY. The green filefish stock had an estimated MSY of around 160,000 tlyr at an effort of 2,500,000 kw and was depleted by a combination of excessive effort (around 4,000,000 kw in 1993) and marked fluctuations in landings (up to 70,000 tlyr above or below MSY). A sustainable policyfor managing ECS fisheries should address the effects ofboth effort and environmental variation.

Postmortem changes in hilsa fish. Pt. 1. Studies on rigor-mortis, typical yields and protein composition of dark and white muscle of hilsa fish (Tenualosa ilisha Ham.)

Hilsa (Hilsa ilisha) caught by gill net were immediately killed by cranial spiking. Three fish were kept in ice (0°C) and three other at room temperature (33°C) to follow development of rigor mortis and changes in muscle pH. The rest were frozen stored at -20°C. Rigor started 15 minutes after death in all fish and reached full rigor (100%) state in 2 and 4 hours respectively in fish kept at 33° and 0°C. The fish at 33°C deteriorated 16 hours after while in full rigor but those at 0°C lasted 26 hours of death without deterioration. Freshly caught hilsa had a muscle pH around 7 which decreased with time rapidly at 33°C and slowly at 0°C. The relative proportion of protein fraction in white and dark muscle of fish stored at 0°C and -20°C were also studied. The proportion of dark muscle was 30.34% of the white muscle. White muscle in fish at 0°C was found to contain 32.0% sarcoplasmic, 57.6% myofibrilla, 9.4% alkali-soluble and 1.1% stroma protein whereas these proteins in dark muscle were 29.9%, 58.4%, 9.8% and 1.9% respectively. The protein fractions of white muscle in frozen-fish were found 27.6% sarcoplasmic, 64.7% myofibrilla, 6.0% alkali-soluble and 1.7% of stroma protein whereas they were 30.6%, 58.6%, 8.9 and 1.9% for dark muscle. Some changes occurred in protein composition during frozen storage. The relative amounts of sarcoplasmic, alkali soluble and stroma protein fractions decreased while myofibrilla fraction increased in frozen condition. This may be attributed to drip loss of soluble protein during thawing.

Estimations of maximum sustainable fish yields and stocking densities of inland reservoirs of Sri Lanka

The Maximum Sustainable Yields of all fish species for 9 man-made reservoirs in Sri Lanka were calculated by the simplified version of Schaefer Model. The relationship between the Maximum Sustainable Yield (MSY) and Morpho-edaphic Index, (MEI) for Sri Lankan reservoirs was found to be: Log sub(e) MSY = 0.9005 log sub(e) MEI + 1.9220. MSY for these reservoirs were estimated using this relationship. The number of Tilapia) juveniles needed to be recruited to the fisheries of some reservoirs in addition to the present recruitment to increase the fish production to the level estimated by MEI relationship were calculated mathematically.

A solid-phase microextraction fiber coated with diglycidyloxycalix[4]arene yields very high extraction selectivity and sensitivity during the analysis of chlorobenzenes in soil

A novel fiber coated with novel sol-gel (5,11,17,23-tetra-tert-butyl-25,27-dihydroxy-26,28-diglycidyloxycalix[4]arene/hydroxy-terminated silicone oil; diglycidyloxy-C[4]/OH-TSO) was prepared for use with headspace solid-phase microextraction (HS-SPME) combined with gas chromatography (GC) and electron capture detection (ECD), which was applied in order to determine nine chlorobenzenes in soil matrices. Due to the improved fiber preparation, which increases the percentage of calixarene in the coating, the new calixarene fiber exhibits very high extraction selectivity and sensitivity to chlorine-substituted compounds. Various parameters affecting the extraction efficiency were optimized in order to maximize the sensitivity during the chlorobenzene analysis. Interferences from different soil matrices with different characteristics were investigated, and the amount extracted was strongly influenced by the matrix. Therefore, a standard addition protocol was performed on the real soil samples. The linear ranges of detection for the chlorobenzenes tested covered three orders of magnitude, and correlation coefficients > 0.9976 and relative standard deviations (RSD) < 8% were observed. The detection limits were found at sub-ng/g of soil levels, which were about an order of magnitude lower than those given by the commercial poly(dimethylsiloxane) (PDMS) coating for most of the compounds. The recoveries ranged from 64 to 109.6% for each analyte in the real kaleyard soil matrix when different concentration levels were determined over the linear range, which confirmed the reliability and feasibility of the HS-SPME/GC-ECD approach using the fiber coated with diglycidyloxy-C[4]/OH-TSO for the ultratrace analysis of chlorobenzenes in complex matrices.

L-shell x-ray yields and production cross sections of Zr and Mo bombarded by slow highly charged Ar16+ ions

The L-shell x-ray yields of Zr and Mo bombarded by slow Ar16+ ions are measured. The energy of the Ar16+ ions ranges from about 150keV to 350keV. The L-shell x-ray production cross sections of Zr and Mo are extracted from these yields data. The explanation of these experimental results is in the framework of the adiabatic directionization and the binding energy modified BEA approximation. We consider, in the slow asymmetric collisions such as Ar and Mo/Zr, the transient united atoms (UA) are formed during the ion-surface interaction and the direct-ionization is the main mechanism for the inner-shell vacancy production. Generally, the theoretical results are in good agreement with the experimental data.

Isospin effect of projectile fragment yields

Isospin asymmetry is very important in the nuclear equation of state (EOS), isotope yield from the projectile fragments can give information of the reaction process. In this paper projectile fragment yields are measured in the collision Ar-36,Ar-40 + Ni-64 at incident energy 50 MeV/u with different isospin asymmetry project Ar-36,Ar-40, data analysis, particle identification and event selection are described. Isotope yields are compared in these two reactions, and axe also compared with the empirical parametrization of fragmentation cross-section calculated by EPAX.

System size dependence of associated yields in hadron-triggered jets STAR Collaboration

We present results on the system size dependence of high transverse momentum di-hadron correlations at root s(NN) = 200 GeV as measured by STAR at RHIC. Measurements in d + Au, Cu + Cu and Au + Au collisions reveal similar jet-like near-side correlation yields (correlations at small angular separation Delta phi similar to 0, Delta eta similar to 0) for all systems and centralities. Previous measurements have shown Chat the away-side (Delta phi similar to pi) yield is suppressed in heavy-ion collisions. We present measurements of the away-side Suppression as a function of transverse momentum and centrality in Cu + Cu and Au + Au collisions. The suppression is found to be similar in Cu + Cu and An + An collisions at a similar number of participants. The results are compared to theoretical calculations based on the patron quenching model and the modified fragmentation model. The observed differences between data and theory indicate that the correlated yields presented here will further constrain dynamic energy loss models and provide information about the dynamic density profile in heavy-ion collisions. (C) 2009 Elsevier B.V. All rights reserved.

The Reasons for Ligand-Dependent Quantum Yields and Absorption Spectrum of Four Polypyridylruthenium(II) Complexes with a Tetrazolate-Based Ligand: TDDFT Study

The quantum yield, lifetime, and absorption spectrum of four [Ru(bpy)(2)L](+) [where bpy is 2,2'-bipyridyl; L is represented by the deprotonated form of 2-(1H-tetrazol-5-yl)pyridine (L1) or 2-(1H-tetrazol-5-yl)pyrazine (L2)], as well as their methylated complexes [Ru(bpy)(2)LMe](2+) (RuL1Me and RuL2Me) are closely ligand dependent. In this paper, density functional theory (DFT) and time-dependent DFT (TDDFT) were performed to compare the above properties among these complexes. The calculated results reveal that the replacement of pyridine by pyrazine or the attachment of a CH3 group to the tetrazolate ring greatly increases the pi-accepting ability of the ancillary ligands.

Effects of ultrahigh pressure extraction conditions on yields and antioxidant activity of ginsenoside from ginseng

Ultrahigh pressure technique was employed to extract ginsenosides from roots of ginseng (Panax ginseng C.A. Meyer). The optimal conditions for ultrahigh pressure extraction (UPE) of total ginsenosides were quantified by UV-vis spectrophotometry with the ginsenoside Re as standard, the signal ginsenosides were quantified by HPLC and ELSD with ginsenosides Re, Rg(1), Rb-1, Rc and Rb-2 as standards. Orthogonal design was applied to evaluate the effects of four independent factors (extraction pressure, extraction temperature, extraction time and ethanol concentration) on the yield and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity of ginsenoside, which are based on microwave extraction (ME), ultrasound extraction (UE), soxhlet extraction (SE) and heat reflux extraction (HRE) method. The results showed that UPE method can produce ginsenoside with the highest yield and the best radical scavenging activity compared to other used ones. Scanning electron microscopic (SEM) images of the plant cells after ultrahigh pressure treatment was obtained to provide visual evidence of the disruption effect.

Analysis of high wheat yields in Northwest China

Grain yields of over 14 Mg ha(-1) were reported in 1978 for spring wheat (Triticum aestivum L.) grown in Northwest China. Understanding the circumstances under which this record yield was achieved may be useful in defining the key factors that lead to high grain yields and in determining the limits to wheat yield. A relatively simple, mechanistic model was used in an effort to simulate the record yield. The model was used as a framework in which various crop traits could be adjusted to match the observed crop growth. The weather that was characterized by cool temperatures and high levels of solar radiation, proved to be especially important in allowing a full-season crop to achieve record yields. Variables defining plant development in the model also had to be set to describe the high yielding cultivar grown in China. Leaf development was defined by the length of a phyllochron, which was set equal to 78 TU (thermal units, base temperature equal to 0 degrees C) based on independent data. The description of grain fill had to be defined to match simulation results with the observations. Two variables, length of the grain-fill period and the grain growth rate, were set in response to the unique traits of this cultivar and the low temperatures during grain development. These simulations led to important suggestions for examining the interaction between cool temperature regimes and developmental traits of wheat cultivars. (C) 1997 Published by Elsevier Science Ltd.