Impact of Referral Protocols on the Dental Management of Patients Undergoing Treatment for Head and Neck Oncology in Northern Ireland

Objective: To evaluate the handling, by a group of practice-based researchers, of a recently introduced bulk fill resin-based composite restorative material, Filtek Bulk Fill Restorative (3M ESPE).

Methods: The twelve selected evaluators were sent explanatory letters, a pack of the material under investigation to use for 8 weeks, and a questionnaire.

Results: The evaluators rated the ease of use of the bulk fill restorative the same as the previously used posterior composite material. The provision of one shade only for evaluation may have compromised the score for aesthetic quality. No post-operative sensitivity was reported.

Conclusions: The bulk fill material was well received as indicated by the high number of evaluators who would both purchase the material and recommend it to colleagues.

Clinical relevance: A recently introduced bulk fill restorative material achieved a rating for handling which was similar to the evaluators’ previously used resin composite, although there were some concerns regarding the translucency of the material.

Dépistage prénatal de la trisomie 21 et autres aneuploïdies au premier trimestre

La présente thèse par articles aborde différentes facettes du dépistage prénatal de certaines aneuploïdies au premier trimestre de la grossesse. L’introduction retrace l’historique du dépistage prénatal et énonce les différents marqueurs biochimiques et échographiques associés aux aneuploïdies. La première publication démontre que le tabagisme maternel abaisse significativement les niveaux sanguins maternels de PAPP-A et de la fraction libre de la β-hCG et augmente significativement la clarté nucale, confirmant la nécessité de contrôler cette co-variable dans le calcul de risque final, du moins pour la trisomie 18. Le deuxième article identifie des seuils de clarté nucale au-delà desquels la biochimie génétique n’apporte aucune valeur additionnelle au dépistage prénatal de la trisomie 21 et de la trisomie 18. Pour les fœtus avec clarté nucale supérieure aux seuils établis, un diagnostic prénatal intrusif devrait être offert sans délai. Le troisième et dernier article porte sur la première détermination des niveaux plasmatiques maternels de la protéine FLRG (follistatin-related gene) au premier trimestre de grossesse et sur son rôle potentiel à titre de marqueur biochimique dans le dépistage prénatal de la trisomie 21. Bien que détectables, les niveaux plasmatiques maternels de FLRG ne sont pas significativement altérés en présence de fœtus avec syndrome de Down. Dans la discussion générale, les trois articles sont abordés sous un angle plus spécifique au Québec. Des données complémentaires et originales y sont présentées. Une discussion sur l’évolution future du dépistage prénatal est entamée et des axes de recherche sont proposés.

PAPP-A y β-hCG libre como predictores de preeclampsia y bajo peso al nacer en una población latina

Introducción: La Preeclampsia ocurre entre el 2-7% de los embarazos. Previos estudios han sugerido la asociación entre los niveles alterados de PAPP-A y la β-hCG libre con el desarrollo de Preeclampsia (PE) y/o Bajo Peso al Nacer (BPN). Metodología: El diseño del estudio es de Prueba Diagnóstica con enfoque de casos y controles. Las mediciones séricas de PAPP-A y la β-hCG libre, fueron realizadas entre la semana 11-13.6 días durante 2 años. Resultados: La cohorte incluyó 399 pacientes, la incidencia de PE fue de 2,26% y de BPN fue de 14.54%. El punto de corte del percentil 10 fue MoM PAPP-A: 0,368293 y MoM β-hCG libre: 0,412268; la especificidad en PE leve fue de 90,5 y para BPN de 90. Los MoM de la β-hCG libre, la edad y el peso materno se comportan como factores de riesgo, mientras que mayores valores de MoM de la PAPP-A y mayor número de partos factores de protección. Para el BPEG severo la edad materna y la paridad se comportan como factores de riesgo, mientras que un aumento promedio de los valores de los MoM de la PAPP-A y la β-hCG libre, como factores de protección en el desarrollo de BPEG Severo. Conclusiones: Existe una relación significativa entre los valores alterados de PAPP-A y de β-hCG libre, valorados a la semana 11 a 13 con la incidencia de Preeclampsia y de Bajo Peso al nacer en fetos cromosómicamente normales, mostrando unos niveles significativamente más bajos a medida que aumentaba la severidad de la enfermedad.

Eficacia del diagnóstico prenatal no invasivo por células fetales libres en sangre materna 1990-2014. Revisión sistemática

ANTECEDENTES: El aislamiento de células fetales libres o ADN fetal en sangre materna abre una ventana de posibilidades diagnósticas no invasivas para patologías monogénicas y cromosómicas, además de permitir la identificación del sexo y del RH fetal. Actualmente existen múltiples estudios que evalúan la eficacia de estos métodos, mostrando resultados costo-efectivos y de menor riesgo que el estándar de oro. Este trabajo describe la evidencia encontrada acerca del diagnóstico prenatal no invasivo luego de realizar una revisión sistemática de la literatura. OBJETIVOS: El objetivo de este estudio fue reunir la evidencia que cumpla con los criterios de búsqueda, en el tema del diagnóstico fetal no invasivo por células fetales libres en sangre materna para determinar su utilidad diagnóstica.  MÉTODOS: Se realizó una revisión sistemática de la literatura con el fin de determinar si el diagnóstico prenatal no invasivo por células fetales libres en sangre materna es efectivo como método de diagnóstico.  RESULTADOS: Se encontraron 5,893 artículos que cumplían con los criterios de búsqueda; 67 cumplieron los criterios de inclusión: 49.3% (33/67) correspondieron a estudios de corte transversal, 38,8% (26/67) a estudios de cohortes y el 11.9% (8/67) a estudios casos y controles. Se obtuvieron resultados de sensibilidad, especificidad y tipo de prueba. CONCLUSIÓN: En la presente revisión sistemática, se evidencia como el diagnóstico prenatal no invasivo es una técnica feasible, reproducible y sensible para el diagnóstico fetal, evitando el riesgo de un diagnóstico invasivo.

Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Enamel microabrasion followed by dental bleaching for patients after orthodontic treatment - Case reports

This article reports clinical procedures used to remove residual bonded resin and enamel stains following bracket debonding at the conclusion of orthodontic treatment. A water-cooled fine-tapered diamond bur was used for resin removal, followed by enamel surface finishing using a commercially available microabrasion paste. It was noted that residual tooth coloration remained yellowish because of enamel translucency; the yellow dentin shade showed through. Additional tooth shade lightening was achieved using carbamide peroxide dental bleaching solution in custom-formed trays. This report describes a safe and effective technique that optimizes tooth appearance at the conclusion of orthodontic therapy. Mechanical resin removal, enamel microabrasion, and tooth bleaching are employed.

Functional and esthetic rehabilitation with In-Ceram alumina and zirconia system: A multidisciplinary approach

The development of all-ceramic systems following metalceramics restorations allowed simulation of natural dentition due to favorable esthetics and resistance. In-Ceram is an alternative when esthetics is primordial as well as resistance required in rehabilitation. However, an ideal smile is associated to not only shape, color, texture and translucency but also harmony with gingival tissue. So, the aim of this study is to report a clinical case based on periodontal and fixed partial dentures principles to perform periodontal plastic surgery followed by esthetic rehabilitation. A female patient, 40-year-old, presented complaint about dental esthetics. After clinical and radiographic exams, metal-ceramics crowns (teeth 11, 12, 13, 21, 22 and 23) were considered unsatisfactory due to marginal leakage, color change in gingival tissue associated to metallic margin, and gummy smile. So, a crown lengthening surgery of anterior teeth was performed followed by rehabilitation of superior teeth with In-Ceram single crowns. Clinical significance: The interaction between periodontics and fixed prosthodontic area is the key of an adequated treatment planning which involves gingival smile to provide function and an esthetic condition in association with an esthetic, resistant and predictable material.

Anterior restorations in bleached teeth: Difficulty establishing the color after bleaching

It is becoming more common for patients to look for cosmetic procedures in dental offices. The search for lost or desired esthetics by patients is increasingly frequent and the professional must be able to meet this demand. To do this, dentists not only need to return the tooth back to its normal functioning state but also promote esthetic excellence. In this context, the association of cosmetic procedures, such as teeth whitening and restorative procedures, such as direct adhesive restorations is very common. The composite resins employed nowadays allow the reproduction of various optical properties of natural teeth. With these composite resins, it is possible to reproduce features such as translucency, opacity and specific features of the dental element, to bring back the esthetic harmony of the smile. This article reports a clinical case demonstrating the placement, in a stratified manner, of composite resins in bleached teeth, as well as the reproduction of optical and natural aspects of the teeth. In order to achieve esthetic and functional success of the restored procedure, it is important to be familiar with the new techniques and new materials in the marketand above all, we must know when and where to use them.

Effect of ceramic shade on the degree of conversion of a dual-cure resin cement analyzed by FTIR

Objectives: The aim of this research was to evaluate the degree of monomer conversion of different resin cement shades when photocured under different feldspathic ceramic shades. The photocuring time was also evaluated as well as the translucency of each ceramic shade. Methods: Three VITA VM7 ceramic shades (Base Dentin 0M1, Base Dentin 2M2 and Base Dentin 5M3) were used to determine the translucency percentage. A spectrophotometer MiniScan was used to measure the opacity percentage of each specimen (2-mm-thick) and then the translucency was calculated. To measure the degree of conversion (DC), the resin cement (Variolink II; A3 Yellow and transparent) specimens (thickness: 100 μm) were photocured under a ceramic block (2-mm-thick) for 20 or 40 s. Specimens photocured without the ceramic block were used as control. Sixteen groups (n = 3) were evaluated. Micro-ATR/FTIR spectrometry was used to evaluate the extent of polymerization of all specimens after 24 h. The %DC was calculated of experimentally polymerized versus maximally polymerized composite. Results: The translucency percentages of 0M1, 2M2 and 5M3 ceramics were 12.41 (1.02)%, 5.75 (1.91)% and 1.07 (0.03)%, respectively. The %DC of both resin cement shades cured under ceramic 5M3 was significantly lower than the other groups (p < 0.05). The %DC of 0M1 groups exhibited no significant difference from 2M2 groups (p > 0.05), with the exception of the transparent cement photocured for 40 s. Conclusion: Photocuring under 2 mm ceramic showed that the increase in chroma saturation significantly decreased Variolink II resin cement %DC (100-μm-thick). © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Avaliação do efeito da fumaça do cigarro na translucidez da resina composta: influência do selante da superfície e da escovação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação in vitro da translucidez de dois sistemas cerâmicos metal-free: In-Ceram x Empress 2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Olhar tecer des: (cor)pos forças fluxos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do clareamento dental na cor, translucidez e fluorescência do esmalte e dentina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adesão e grau de conversão: efeito das cores da cerâmica e do agente de fixação resinoso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Níveis de adubação N-K do abacaxizeiro 'BRS Imperial' no extremo Sul da Bahia

Pós-graduação em Agronomia (Ciência do Solo) - FCAV