Bioinspired polyethersulfone-based hollow fiber membranes as the scaffolds in renal assist device for protein-bound toxins removal from blood

Dissertation for obtaining the Master degree in Membrane Engineering

Descoloração e degradação do azo corante Vermelho GRLX-220 por ozonização

The discoloration and degradation of the textile dye RED GRLX-220 using the electrochemically generated ozone was investigated. Total discoloration was rapidly achieved in both acid and basic conditions. A pseudo-first order kinetics was observed for discoloration, influenced by pH and ozonation time. A considerable degree of mineralization (60%) was obtained after 30 min of ozonation in alkaline medium. The feasibility of organic matter oxidation during the ozonation process increased in both acidic and alkaline media. The toxicity decreased after the ozonation process, suggesting that the byproducts are less toxic than the parental compound.

Genetic and maternal contributions to offspring viability under different environmental conditions in various salmonids

Summary : Due to anthropogenic impacts and natural fluctuations, fish usually have to cope with constantly changing and often hostile environments. Whereas adult fish have various possibilities to counteract unfavourable environmental conditions, embryos have much fewer options. Besides by their developing immune system, they are protected by the egg envelopes and several immune substances provided by their mothers. In addition to this, they may also adjust their hatching timing in reaction to various risks. However, individuals may vary in their defensive potential. This variation may be either based on their genetics and/or on differential maternal investments and may be dependent on the experienced stress. Nevertheless, in fish, the impact of such parental contributions on embryo and/or juvenile viability is still poorly investigated. The main objective of this thesis was to investigate the importance of paternal (i.e. genetic) and maternal (i.e. genetic + egg investment) contributions to offspring viability under different environmental conditions and at different life stages. In order to investigate this, we used gametes of various salmonids for in vitro fertilisation experiments based on full-factorial breeding designs. The individual studies are summarised in the following chapters: In the first chapter, we tested the effectiveness of the embryonic immune system in Lake whitefish (Coregonus palaea). Namely, we investigated paternal and maternal contributions to the embryos' tolerance to different kinds of pathogen exposure. Additionally, we tested whether an early sub-léthal exposure has a positive or a negative effect on an embryo's susceptibility to later pathogen exposures with the same pathogen. We found that pre-challenged embryos were more susceptible to future challenges. Moreover, pathogen susceptibility was dependent on maternal investments and/or the embryos' own genetics, depending on the challenge level. Chapter 2 summarises a similar study with brown trout (Salmo trutta). In addition to the previously described investigations, we analysed if genetic effects on offspring viability are mediated either by parental MHC genotypes or relatedness based on neutral microsatellite markers, and we tested if males signal their genetic quality either by their body size or their melanin-based skin colouration. We found that embryo survival was lower at higher stress levels and dependent on the embryos' genetics. Addirionally, parents with similar and/or, very common MHC genotypes had higher offspring viabilities. Finally, darker males produced more viable offspring. In the first two chapters we investigated the embryos' defensive potential based on their immune system, i.e. their pathogen tolerance. In chapter 3 we investigate whether hatching timing of Lake whitefìsh (C. palaea) is dependent on parental contributions and/or on pathogen pressure, and whether there are parental-environmental interactions. We found that whitefish embryos hatch earlier under increasing pathogen pressure. Moreover, hatching timing was affected by embryo genetics and/or maternally provided resources, but the magnitude of the effect was dependent on the pathogen. pressure. We also found a significant paternal-environmental interaction, indicating that the hatching efficiency of a certain sib group is dependent on the pathogen environment. Chapter 4 describes an analogous study with brown trout (S. trutta), with similar findings. In the former chapters, we only looked at offspring performance during the embryonic period, and only under semi-natural conditions. In chapter 5 we now test the performance and viability of embryonic and juvenile brown trout (S. trutta) under natural conditions. To measure embryo viability, we put them in brood boxes, buried them in the gravel of a natural river, and analysed survival after several months. To investigate juvenile survival and performance, wé reared embryos under different stress levels in the laboratory and subsequently released the resulting hatchlings in to a closed river section. Juvenile size and survival was then determined one year later. Additionally, we investigated if sires differ in their genetic quality, determined by embryo and juvenile survival as well as juvenile size, and if they signal their quality by either body size or melanin-based body darkness. We found hat juvenile size was dependent on genetic effects and on maternal investment, whereas this was neither the case for embryo nor for juvenile survival. Additionally, we found that offspring of darker males grew larger, and larger juveniles had also an increased survival. Finally, we found acarry-over effect of the early non-lethal challenge: exposing embryos to higher stress levels resulted in smaller juveniles. To evaluate the long-term performance of differently treated groups, mark-recapture studies are inevitable. For this purpose, effective mass-marking techniques are essential. In chapter 6 we tested the suitability of the fluorescent pigment spray marking method for the mass marking of European graylings (Thymallus thymallus), with very promising results. Our in vitro fertilisation studies on whitefish may reveal new insights on potential genetic benefits of mate choice, but the mating system of whitefish under natural conditions is still poorly investigated. In order to study this, we installed underwater cameras at the spawning place of a Coregonus suidteri population, recorded the whole mating period and subsequently analysed the recordings. Confirmations of previous findings as well as exciting new observations are listed and discussed in chapter 7. Dus aux impacts anthropogéniques et aux fluctuations naturelles, les poissons doivent faire face à des environnements en perpétuel changement. Ces changements font que les poissons doivent s'adapter à de nouvelles situations, souvent hostiles pour eux. Les adultes ont différentes possibilités d'échapper à un environnement peu favorable, ce n'est par contre pas le cas des embryons. Les embryons sont protégés d'une part par leur système immunitaire en développement, d'autre part, par la coquille de l'eeuf et différentes substances immunitaires fournies par leur mère. De plus, ils sont capables d'influencer leur propre date d'éclosion en réponse à différents facteurs de stress. Malgré tout, les individus varient dans leur capacité à se défendre. Cette variation peut être basé sur des facteurs génétiques et/ou sur des facteurs maternels, et est dépendante du stress subi. Néanmoins, chez les poissons, l'impact de telles contributions parentales sur la survie d'embryons et/ou juvéniles est peu étudié. L'objectif principal de cette thèse a été d'approfondir les connaissances sur l'importance de la contribution paternelle (c.a.d. génétique) et maternelle (c.a.d. génétique + investissement dans l'oeuf) sur la survie des jeunes dans différentes conditions expérimentales et stades de vie. Pour faire ces analyses, nous avons utilisé des gamètes de divers salmonidés issus de croisements 'full-factorial'. Les différentes expériences sont résumées dans les chapitres suivants: Dans le premier chapitre, nous avons testé l'efficacité du système immunitaire des embryons chez les corégones (Coregonus palea). Plus précisément nous avons étudié la contribution paternelle et maternelle à la tolérance des embryons à différents niveaux de stress pathogène. Nous avons aussi testé, si une première exposition non létale à un pathogène avait un effet positif ou négatif sur la susceptibilité d'un embryon a une deuxième exposition au même pathogène. Nous avons trouvé que des embryons qui avaient été exposés une première fois étaient plus sensibles au pathogène par la suite. Mais aussi que la sensibilité au pathogène était dépendante de l'investissement de la mère et/ou des gènes de l'embryon, dépendamment du niveau de stress. Le deuxième chapitre résume une étude similaire avec des truites (Salmo truffa). Nous avons examiné, si la survie des jeunes variait sous différentes intensités de stress, et si la variance observée était due aux gènes des parents. Nous avons aussi analysé si les effets génétiques sur la survie des juvéniles étaient dus au MHC (Major Histocompatibility Complex) ou au degré de parenté des parents. De plus, nous avons analysé si les mâles signalaient leur qualité génétique par la taille du corps ou par leur coloration noire, due à la mélanine. On a trouvé que la survie des embryons était plus basse quand le niveau de stress était plus haut mais que la variation restait dépendante de la génétique des embryons. De plus, les parents avec des MHC similaires et/ou communs avaient des embryons avec une meilleure survie. Par contre, des parents avec un degré de parenté plus haut produisent des embryons avec une survie plus mauvaise. Finalement nous avons montré que les mâles plus foncés ont des embryons qui survivent mieux, mais que la taille des mâles n'a pas d'influence sur la survie de ces mêmes embryons. Dans les deux premiers chapitres, nous avons étudié le potentiel de défense des embryons basé sur leur système immunitaire, c.a.d. leur tolérance aux pathogènes. Dans le troisième chapitre, nous nous intéressons à la date d'éclosion des corégones (C. palea), pour voir si elle est influencée par les parents ou par la pression des pathogènes, et si il y a une interaction entre ces deux facteurs. Nous avons trouvé que les jeunes naissent plus rapidement lorsque la pression en pathogènes augmente. La date d'éclosion est influencée par la génétique des embryons et/ou l'investissement des parents, mais c'est la magnitude des effets qui est dépendante de la pression du pathogène. Nous avons aussi trouvé une interaction entre l'effet paternel et l'environnement, ce qui indique que la rapidité d'éclosion de certains croisements est dépendante des pathogènes dans l'environnement. Le chapitre 4 décrit une étude analogue avec de truites (S. truffa), avec des résultats sitzimilaires. Dans les précédents chapitres nous nous sommes uniquement concentrés sur les performances des jeunes durant leur stade embryonnaire, et seulement dans des conditions semi naturelles. Dans le chapitre 5 nous testons la performance et la viabilité des embryons et de juvéniles de truites (S. truffa) dans des conditions naturelles. Nous avons trouvé que la taille des juvéniles était dépendante d'effets génétiques et de l'investissement maternel, mais ceci n'était ni les cas pour les survie des embryons et des juvéniles. De plus, nous avons trouvé que les jeunes des mâles plus foncés devenaient plus grands et que les grands ont un meilleur taux de survie. Finalement nous avons trouvé un 'carry-over effect' d'une première exposition non létale à un pathogène: exposer des embryons à des plus hauts niveaux de stress donnait des juvéniles plus petits. Pour évaluer la performance à long terme de groupes traités dé manières différentes, une méthode de marquage-recapture est inévitable. Pour cette raison, des techniques de marquage en masse sont nécessaires. Dans le chapitre 6, nous avons testé l'efficacité de la technique `fluorescent pigment spray marking' pour le marquage en masse de l'Ombre commun (Thymallus thymallus), avec des résultats très prometteurs. Les études de fertilisations in vitro avec les corégones nous donnent une idée du potentiel bénéfice génétique que représente la sélection d'un bon partenaire, même si le système d'accouplement des corégones en milieu naturel reste peu connu. Pour combler cette lacune, nous avons installé des caméras sous-marines autour de la frayère d'une population de corégones (C. suidteri), nous avons enregistré toute la période de reproduction et nous avons analysé les données par la suite. Ainsi, nous avons été capables de confirmer bien des résultats trouvés précédemment, mais aussi de faire de nouvelles observations. Ces résultats sont reportés dans le septième chapitre, où elles sont comparées avec des observations antérieures.

Initial development and gas exchange of Talisia subalbens (Mart.) Radlk. under different shading conditions

Ecophysiological studies under semi-controlled conditions in nurseries and greenhouses are essential to enable the use of native species to recover degraded areas and for commercial planting. Talisia subalbens (Mart) Radlk, 'cascudo', is a native fruiting species of the Cerrado on the verge of extinction. The ecophysiological performance of this species was evaluated in nursery conditions under different levels of shading (full sunshine, 30%, 50% and 70%). Initial growth, biomass allocation, gas exchange and chlorophyll content of the plants were analyzed. Full sunshine cultivated plants showed a higher accumulation of total, shoot, and root dry biomass. There was no significant difference in the root/shoot ratio among the treatments. Seedlings cultivated under full sunshine and 30% shading showed higher values for height, basal diameter, and leaf area. Differences in stomata conductance and photosynthesis rate were not observed among the different shading levels. Plants cultivated under 70% of shading had higher contents of chlorophyll a, b, and total. During the initial phase with higher levels of radiation were fundamental for the development of T. subalbens seedlings.

Regulated deficit irrigation and tommy atkins mango orchard productivity under microsprinkling in brazilian semi arid

This study aimed to test controlled levels of water deficiency in soil in mango trees, under microsprinkling irrigation, in semi-arid conditions, and to evaluate its effect in the productivity and fruits quality. The deficits were applied in the phases I, II and III of growth of the fruit, during the productive cycles of the mango tree in 2006 and 2007. The experiment in both cases was arranged in an entirely random design with 10 treatments and 3 repetitions, in the year I, and with 8 treatments and 3 repetitions in the year II. The values of soil water potential, of the treatments submitted to regulated deficit irrigation (RDI), were placed in the range of 0 to -0.011 MPa, showing that the soil humidity varied between the saturation and the field capacity, not characterizing deficit water condition. The average values of stem water potential (Ψstem) varied between -0.90 and -1.74 MPa, evidencing significant effect (p <0.05) just for T1 (without irrigation), T7 and T8 (RDI with 30% of the ETc in the phases II and III, respectively). Through the variance analysis, significant differences were not verified among productivity, number of fruits per plant and size of the fruit, in none of the experiments, what indicates the possibility of reduction of the water use in the irrigation of the mango tree without significant losses of productivity and fruit quality.

Catalysis by gold for biomass transformations

The development of new technologies to supplement fossil resources has led to a growing interest in the utilization of alternative routes. Biomass is a rich renewable feedstock for producing fine chemicals, polymers, and a variety of commodities replacing petroleumderived chemicals. Transformation of biomass into diverse valuable chemicals is the key concept of a biorefinery. Catalytic conversion of biomass, which reduces the use of toxic chemicals is one of the important approaches to improve the profitability of biorefineries. Utilization of gold catalysts allows conducting reactions under environmentally-friendly conditions, with a high catalytic activity and selectivity. Gold-catalyzed valorization of several biomass-derived compounds as an alternative approach to the existing technologies was studied in this work. Isomerization of linoleic acid via double bond migration towards biologically active conjugated linoleic acid isomers (CLA) was investigated. The activity and selectivity of various gold catalysts towards cis-9,trans-11-CLA and trans-10,cis-12-CLA were investigated in a semi-batch reactor, showing that the yield of the desired products varied, depending on the catalyst support. The structure sensitivity in the selective oxidation of arabinose was demonstrated using a series of gold catalysts with different Au cluster sizes in a shaker reactor operating in a semibatch mode. The gas-phase selective oxidation of ethanol was studied and the influence of the catalyst support on the catalytic performance was investigated. The selective oxidation of the lignan hydroxymatairesinol (HMR), extracted from the Norway spruce (Picea abies) knots, to the lignan oxomatairesinol (oxoMAT) was extensively investigated. The influence of the reaction conditions and catalyst properties on the yield of oxoMAT was evaluated. In particular, the structure sensitivity of the reaction was demonstrated. The catalyst deactivation and regeneration procedures were studied. The reaction kinetics and mechanism were advanced.

Influence of multi-phase phenomena on semibatch crystallization processes of aqueous solutions

Crystal properties, product quality and particle size are determined by the operating conditions in the crystallization process. Thus, in order to obtain desired end-products, the crystallization process should be effectively controlled based on reliable kinetic information, which can be provided by powerful analytical tools such as Raman spectrometry and thermal analysis. The present research work studied various crystallization processes such as reactive crystallization, precipitation with anti-solvent and evaporation crystallization. The goal of the work was to understand more comprehensively the fundamentals, phenomena and utilizations of crystallization, and establish proper methods to control particle size distribution, especially for three phase gas-liquid-solid crystallization systems. As a part of the solid-liquid equilibrium studies in this work, prediction of KCl solubility in a MgCl2-KCl-H2O system was studied theoretically. Additionally, a solubility prediction model by Pitzer thermodynamic model was investigated based on solubility measurements of potassium dihydrogen phosphate with the presence of non-electronic organic substances in aqueous solutions. The prediction model helps to extend literature data and offers an easy and economical way to choose solvent for anti-solvent precipitation. Using experimental and modern analytical methods, precipitation kinetics and mass transfer in reactive crystallization of magnesium carbonate hydrates with magnesium hydroxide slurry and CO2 gas were systematically investigated. The obtained results gave deeper insight into gas-liquid-solid interactions and the mechanisms of this heterogeneous crystallization process. The research approach developed can provide theoretical guidance and act as a useful reference to promote development of gas-liquid reactive crystallization. Gas-liquid mass transfer of absorption in the presence of solid particles in a stirred tank was investigated in order to gain understanding of how different-sized particles interact with gas bubbles. Based on obtained volumetric mass transfer coefficient values, it was found that the influence of the presence of small particles on gas-liquid mass transfer cannot be ignored since there are interactions between bubbles and particles. Raman spectrometry was successfully applied for liquid and solids analysis in semi-batch anti-solvent precipitation and evaporation crystallization. Real-time information such as supersaturation, formation of precipitates and identification of crystal polymorphs could be obtained by Raman spectrometry. The solubility prediction models, monitoring methods for precipitation and empirical model for absorption developed in this study together with the methodologies used gives valuable information for aspects of industrial crystallization. Furthermore, Raman analysis was seen to be a potential controlling method for various crystallization processes.

A reaction engineering approach to homogeneously catalyzed glycerol hydrochlorination

The production of biodiesel through transesterification has created a surplus of glycerol on the international market. In few years, glycerol has become an inexpensive and abundant raw material, subject to numerous plausible valorisation strategies. Glycerol hydrochlorination stands out as an economically attractive alternative to the production of biobased epichlorohydrin, an important raw material for the manufacturing of epoxy resins and plasticizers. Glycerol hydrochlorination using gaseous hydrogen chloride (HCl) was studied from a reaction engineering viewpoint. Firstly, a more general and rigorous kinetic model was derived based on a consistent reaction mechanism proposed in the literature. The model was validated with experimental data reported in the literature as well as with new data of our own. Semi-batch experiments were conducted in which the influence of the stirring speed, HCl partial pressure, catalyst concentration and temperature were thoroughly analysed and discussed. Acetic acid was used as a homogeneous catalyst for the experiments. For the first time, it was demonstrated that the liquid-phase volume undergoes a significant increase due to the accumulation of HCl in the liquid phase. Novel and relevant features concerning hydrochlorination kinetics, HCl solubility and mass transfer were investigated. An extended reaction mechanism was proposed and a new kinetic model was derived. The model was tested with the experimental data by means of regression analysis, in which kinetic and mass transfer parameters were successfully estimated. A dimensionless number, called Catalyst Modulus, was proposed as a tool for corroborating the kinetic model. Reactive flash distillation experiments were conducted to check the commonly accepted hypothesis that removal of water should enhance the glycerol hydrochlorination kinetics. The performance of the reactive flash distillation experiments were compared to the semi-batch data previously obtained. An unforeseen effect was observed once the water was let to be stripped out from the liquid phase, exposing a strong correlation between the HCl liquid uptake and the presence of water in the system. Water has revealed to play an important role also in the HCl dissociation: as water was removed, the dissociation of HCl was diminished, which had a retarding effect on the reaction kinetics. In order to obtain a further insight on the influence of water on the hydrochlorination reaction, extra semi-batch experiments were conducted in which initial amounts of water and the desired product were added. This study revealed the possibility to use the desired product as an ideal “solvent” for the glycerol hydrochlorination process. A co-current bubble column was used to investigate the glycerol hydrochlorination process under continuous operation. The influence of liquid flow rate, gas flow rate, temperature and catalyst concentration on the glycerol conversion and product distribution was studied. The fluid dynamics of the system showed a remarkable behaviour, which was carefully investigated and described. Highspeed camera images and residence time distribution experiments were conducted to collect relevant information about the flow conditions inside the tube. A model based on the axial dispersion concept was proposed and confronted with the experimental data. The kinetic and solubility parameters estimated from the semi-batch experiments were successfully used in the description of mass transfer and fluid dynamics of the bubble column reactor. In light of the results brought by the present work, the glycerol hydrochlorination reaction mechanism has been finally clarified. It has been demonstrated that the reactive distillation technology may cause drawbacks to the glycerol hydrochlorination reaction rate under certain conditions. Furthermore, continuous reactor technology showed a high selectivity towards monochlorohydrins, whilst semibatch technology was demonstrated to be more efficient towards the production of dichlorohydrins. Based on the novel and revealing discoveries brought by the present work, many insightful suggestions are made towards the improvement of the production of αγ-dichlorohydrin on an industrial scale.

Leaf gas exchange and fruit yield in sweet orange trees as affected by citrus variegated chlorosis and environmental conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Teores de cobre, ferro, manganês e zinco no fígado e pâncreas de caprinos semi-confinados e confinados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

An evaluation of the productivity of mischocyttarus drewseni in a semi-urban environment (Hymenoptera: Polistinae)

The biology and productivity of Myschocytarus drewseni were studied in semi urban conditions at Rio Claro, S P - Brazil. We observed 51 nest foundations, of which 24 (47%) were destroyed or predated, 13 (25.5 %) were abandoned and 14 (27.5%) completed the cycle. The life-span of colonies ranged from 44-427 days with a mean of 216.7 ± 140.6 days, producing 8-390 cells with a mean of 125.7 ± 137.9 cells, and 2-303 adults with a mean of 89.4 ± 110.36 adults. We observed a maximum of 3 utilizations/cell. This showed that the species presents asynchronous foundation and abandoningoccurs throughout the year. Also, the chance of a colony utilizing the same cells two or three times for adult production is highly dependent on the colony size/age, and the relation between them is positive, meaning that there is a greater chance of cell re-utilization in larger/older colonies.

Evaluation of the pathogenicity of multiple isolates of Beauveria bassiana (Hypocreales: Clavicipitaceae) on Rhynchophorus ferrugineus (Coleoptera: Dryophthoridae) for the assessment of a solid formulation under simulated field conditions

A solid state formulation of Beauveria bassiana (Balsamo) Vuillemin has been developed for biological control of the Red Palm Weevil (RPW), Rhynchophorus ferrugineus (Olivier, 1790). Two kinds of bioassays (dry conidia and dipping) using 10 isolates from several coleopterans in Mediterranean environments, identified 2 RPW derived isolates (193 and 203) as most pathogenic to RPW larvae and adults (zero survival within first 4–5 d for dry conidia, and 14 and 23 d for dipping bioassays). Isolate 203 (5.1 × 108 ± 1.9 × 108 conidia g-1) was formulated with fragmented date seed into solid granules and tested in palms infested with RPW under semi-field conditions in Feb, Apr/May and Jun of both 2007 and 2008. Beauveria bassiana significantly reduced RPW adult survival with respect to controls in May 2007 and in the Apr/Jun 2008 experiments. Total RPW adult mortality was achieved within 30 days for all B. bassiana treatments, and was associated with increasing numbers of insects with signs of mycosis in 2008 experiments. Beauveria bassiana formulation reduced RPW multiplication in artificially infested palms compared to controls, and a positive correlation between numbers of larvae and time post-infestation was recorded. The suppression of RPW adult populations by B. bassiana persisted for at least 3 months under semi-field conditions. The Beauveria bassiana solid formulation, which induces great adult mortality and persistence in the field, could be applied as a preventive as well as a curative treatment for the integrated management of RPW.

Ablative Pyrolysis of Beetle-killed Trees

Thesis (Ph.D.)--University of Washington, 2016-06

A simulation model of cereal-legume intercropping systems for semi-arid regions I. Model development

Cereal-legume intercropping plays an important role in subsistence food production in developing countries, especially in situations of limited water resources. Crop simulation can be used to assess risk for intercrop productivity over time and space. In this study, a simple model for intercropping was developed for cereal and legume growth and yield, under semi-arid conditions. The model is based on radiation interception and use, and incorporates a water stress factor. Total dry matter and yield are functions of photosynthetically active radiation (PAR), the fraction of radiation intercepted and radiation use efficiency (RUE). One of two PAR sub-models was used to estimate PAR from solar radiation; either PAR is 50% of solar radiation or the ratio of PAR to solar radiation (PAR/SR) is a function of the clearness index (K-T). The fraction of radiation intercepted was calculated either based on Beer's Law with crop extinction coefficients (K) from field experiments or from previous reports. RUE was calculated as a function of available soil water to a depth of 900 mm (ASW). Either the soil water balance method or the decay curve approach was used to determine ASW. Thus, two alternatives for each of three factors, i.e., PAR/SR, K and ASW, were considered, giving eight possible models (2 methods x 3 factors). The model calibration and validation were carried out with maize-bean intercropping systems using data collected in a semi-arid region (Bloemfontein, Free State, South Africa) during seven growing seasons (1996/1997-2002/2003). The combination of PAR estimated from the clearness index, a crop extinction coefficient from the field experiment and the decay curve model gave the most reasonable and acceptable result. The intercrop model developed in this study is simple, so this modelling approach can be employed to develop other cereal-legume intercrop models for semi-arid regions. (c) 2004 Elsevier B.V. All rights reserved.

Recovery of glass fibre and carbon fibres from reinforced thermosets by batch pyrolysis and investigation of fibre re-using as reinforcement in LDPE matrix

A semi-batch pyrolysis process was used to recover samples carbon fibre and glass fibre from their respective wastes. The mechanical properties of the recovered fibres were tested and compared to those of virgin fibres, showing good retention of the fibre properties. The recovered fibres were then used to prepare new LDPE composite materials with commercial and laboratory-synthesized compatibilizers. Mild oxidation of the post-pyrolysis recovered fibres and the use of different compatibilizers gave significant improvements in the mechanical properties of the LDPE composites; however some of the manufactured composites made from recovered fibres had properties similar to those made from virgin fibres.