Isotermas de sorção e cinética de secagem de sementes de pomelo

The drying of grapefruit seeds, by-products from grapefruit processing, was studied at 40, 50, 60 and 70°C and at three air velocities, 0.6, 1.0 and 1.4 m s-1. Sorption isotherms of grapefruit seeds were obtained at each temperature by the static method using saturated salt solutions. The Henderson model adequately described the sorption isotherms, over the entire temperature range. Drying rates indicated that the drying of grapefruit seeds took place under the falling rate period. Effective moisture diffusivity in grapefruit seeds ranged from 4.36 × 10-10 to 6.82 × 10-10 m2 s-1. The temperature dependence of the effective diffusivity followed an Arrhenius relationship, and the activation energies were 12.23, 11.29 and 11.79 kJ mol-1 for dried grapefruit seeds under air velocities of 0.6, 1.0 and 1.4 m s-1, respectively. Three thin-layer models were used to predict the drying curves, Page, Lewis, and Henderson-Pabis model. The Page model presented the best fit for all drying air temperatures and velocities studied.

High pressure vapor-liquid equilibria of palm fatty acids distillates-carbon dioxide system

Equilíbrio líquido-vapor do sistema destilado ácido do óleo de palma-dióxido de carbono a alta pressão. Foi investigado experimentalmente o equilíbrio líquido-vapor para o sistema Destilado Ácido de Óleo de Palma (PFAD)/Dióxido de Carbono, nas temperaturas de 333, 353 e 373 K e pressões de 20, 23, 26 e 29 MPa, usando-se o método estático. Os dados experimentais do sistema pseudo-binário PFAD/CO₂ foram correlacionados com a equação de estado de Redlich-Kwong do pacote computacional ASPEN. O modelo reproduz bem os resultados experimentais. A seletividade obtida indica que o CO₂ supercrítico é um solvente razoável para a separação em coluna multi-estágio e contínua, do ácido graxo saturado (ácido palmítico) daqueles insaturados (ácido oleico e ácido linoleico) contidos no PFAD.

Potencialidade do gps de navegação garmin 12 xl utilizando um sistema de baixo custo

Since 2000 the use of the GPS navigation increases considerably. The reason for that was the deactivation of the selective availability in May 2000. However, these receivers do not register the observables, they just estimate and store them and that prevents the post-processing data. Based in this aspect some softwares were developed and are available for free. They allow recording the GPS observables, pseudorange and carrier phase. These programs are able to read in binary files and record information concerning the GPS observables and to convert binary format to a RINEX format. This study presents the GPS Garmin 12 XL evaluation using free programs. Two experiments were carried out in Presidente Prudente-SP region using the relative static survey. The processing was carried out with intervals of 30, 15, 10 and 5 minutes. The results were compared with the coordinates from a geodetic receiver and show that 98.9 % of the points, the values in relation to the planimetric accuracy were better than 0.50 m. The only baseline which the value was larger or equal to 0.50 m is the point M0001 (baseline lesser than 2 km) referred to the first experiment. In terms of precision the values did not exceeded 0.30 m.

Atmospheric heterogeneous reactions of N 2 O 5 and NO 3 radicals with mineral dust particles

Die heterogenen Reaktionen von N2O5 bzw. NO3 auf mineralischen Staubpartikeln wurden untersucht, um deren Einfluss auf den Abbau atmosphärischer Stickoxide (NOx) sowie auf die chemische Veränderung der Staubpartikel während ihres Transportes durch die Atmosphäre besser verstehen zu können. Die experimentellen Studien wurden bei Atmosphärendruck, Raumtemperatur und unterschiedlichen relativen Luftfeuchten durchgeführt. Der Aufnahmekoeffizient γ(N2O5) von N2O5 auf dispergiertem Staub aus der Sahara wurde zu 0,020 ± 0,002 (1σ) bestimmt, unabhängig von der relativen Feuchte (0 - 67 %) sowie der N2O5-Konzentration (5x1011 - 3x1013 Moleküle cm-3).rnDie Analyse der Reaktionsprodukte in der Gasphase sowie auf der Partikeloberfläche führt zu der Annahme, dass N2O5 auf der Staubpartikeloberfläche zu Nitrat hydrolysiert wird. Es konnte kein Einfluss der relativen Feuchte auf den Aufnahmekoeffizienten ermittelt werden, was durch das vorhandene interlamellare Wasser, welches bis zu 10 % der Partikelmasse betragen kann, erklärbar ist. Der gemessene Wert des Aufnahmekoeffizienten ist unabhängig von der Eingangs-N2O5-Konzentration, was sich über die sehr große innere Oberfläche der Partikel erklären lässt. Dennoch ließ sich durch eine vorherige Konditionierung der Partikel mit gasförmigem HNO3, was eine Nitratanreicherung an der Oberfläche bewirkt, die Effizienz der N2O5-Aufnahme auf die Staubpartikel reduzieren. Zusätzliche Studien befassten sich mit der Bestimmung des Aufnahmekoeffizienten von N2O5 auf Illit-Partikeln und auf Teststaub aus Arizona. Bei einer relativen Luftfeuchte von 0 % wurden für γ(N2O5) Werte von 0,084 ± 0,019 (1σ) für Illit und von 0,010 ± 0,001 (1σ) für Arizona Teststaub ermittelt.rnUnter Anwendung einer neuartigen Messmethode, die auf der zeitgleichen Messung der Konzentrationsabnahme von NO3 und N2O5 relativ zueinander beruht, wurde das Verhältnis γ(NO3)/γ(N2O5) der Aufnahmekoeffizienten von NO3 und N2O5 auf Saharastaub zu 0,9 ± 0,4 (1σ) bestimmt. Dieser Wert war unabhängig von der relativen Feuchte, den NO3- und N2O5-Konzentrationen sowie der Reaktionszeit, obwohl eine Oberflächendeaktivierung für beide Spurenstoffe beobachtet wurde.

Software zur automatischen Tumordiagnose in der funktionalen MRT der weiblichen Brust

In den westlichen Industrieländern ist das Mammakarzinom der häufigste bösartige Tumor der Frau. Sein weltweiter Anteil an allen Krebserkrankungen der Frau beläuft sich auf etwa 21 %. Inzwischen ist jede neunte Frau bedroht, während ihres Lebens an Brustkrebs zu erkranken. Die alterstandardisierte Mortalitätrate liegt derzeit bei knapp 27 %.rnrnDas Mammakarzinom hat eine relative geringe Wachstumsrate. Die Existenz eines diagnostischen Verfahrens, mit dem alle Mammakarzinome unter 10 mm Durchmesser erkannt und entfernt werden, würden den Tod durch Brustkrebs praktisch beseitigen. Denn die 20-Jahres-Überlebungsrate bei Erkrankung durch initiale Karzinome der Größe 5 bis 10 mm liegt mit über 95 % sehr hoch.rnrnMit der Kontrastmittel gestützten Bildgebung durch die MRT steht eine relativ junge Untersuchungsmethode zur Verfügung, die sensitiv genug zur Erkennung von Karzinomen ab einer Größe von 3 mm Durchmesser ist. Die diagnostische Methodik ist jedoch komplex, fehleranfällig, erfordert eine lange Einarbeitungszeit und somit viel Erfahrung des Radiologen.rnrnEine Computer unterstützte Diagnosesoftware kann die Qualität einer solch komplexen Diagnose erhöhen oder zumindest den Prozess beschleunigen. Das Ziel dieser Arbeit ist die Entwicklung einer vollautomatischen Diagnose Software, die als Zweitmeinungssystem eingesetzt werden kann. Meines Wissens existiert eine solche komplette Software bis heute nicht.rnrnDie Software führt eine Kette von verschiedenen Bildverarbeitungsschritten aus, die dem Vorgehen des Radiologen nachgeahmt wurden. Als Ergebnis wird eine selbstständige Diagnose für jede gefundene Läsion erstellt: Zuerst eleminiert eine 3d Bildregistrierung Bewegungsartefakte als Vorverarbeitungsschritt, um die Bildqualität der nachfolgenden Verarbeitungsschritte zu verbessern. Jedes kontrastanreichernde Objekt wird durch eine regelbasierte Segmentierung mit adaptiven Schwellwerten detektiert. Durch die Berechnung kinetischer und morphologischer Merkmale werden die Eigenschaften der Kontrastmittelaufnahme, Form-, Rand- und Textureeigenschaften für jedes Objekt beschrieben. Abschließend werden basierend auf den erhobenen Featurevektor durch zwei trainierte neuronale Netze jedes Objekt in zusätzliche Funde oder in gut- oder bösartige Läsionen klassifiziert.rnrnDie Leistungsfähigkeit der Software wurde auf Bilddaten von 101 weiblichen Patientinnen getested, die 141 histologisch gesicherte Läsionen enthielten. Die Vorhersage der Gesundheit dieser Läsionen ergab eine Sensitivität von 88 % bei einer Spezifität von 72 %. Diese Werte sind den in der Literatur bekannten Vorhersagen von Expertenradiologen ähnlich. Die Vorhersagen enthielten durchschnittlich 2,5 zusätzliche bösartige Funde pro Patientin, die sich als falsch klassifizierte Artefakte herausstellten.rn

Emissões de gases de efeito estufa e amônia oriundas da criação de frangos de corte em múltiplos reúsos da cama

Vários países têm buscado investigar as emissões de gases do efeito estufa (GEE) e amônia (NH3) na atividade animal para melhor compreensão da dinâmica e excesso desses gases na atmosfera. As informações disponíveis na literatura sobre as emissões de GEE e NH3 em aviários são variáveis e incertas devido à diversidade e condições particulares das instalações, bem como das inúmeras diferenças no sistema de criação e das complexas interações observadas nos dejetos dos animais. A caracterização das emissões do setor avícola normalmente é realizada por monitoramento aéreo das concentrações dos gases dentro das instalações de produção. No entanto, alguns métodos adotados são insuficientes devido às interferências de outros gases, razão por que as medições podem não refletir, com exatidão, as emissões reais. Diante dessa complexidade, nesta pesquisa buscou-se aplicar técnicas que apresentam menores interferências, bem como desenvolver um sistema de amostragem para medir diretamente as emissões de N2O, CH4 e NH3 dos dejetos de frangos de corte. No desenvolvimento do método, utilizou-se como referência o princípio da câmara estática fechada e a análise por cromatografia gasosa (CG), para estimar as emissões de GEE. Para quantificação direta das emissões de NH3, adaptou-se um método semiaberto estático, baseado na captura, em meio ácido, do NH3 volatilizado dos dejetos das aves. Adicionalmente, buscou-se monitorar as emissões diárias de NH3, CH4 e N2O dos dejetos dos frangos, considerando o típico manejo de reutilização da cama de frango. Foram propostos modelos empíricos para as predições das emissões de N2O, CH4 e NH3, em função do número de reutilizações da cama, da idade das aves e de propriedades físico-químicas da cama de frango. As emissões acumuladas por quatro ciclos de criação permitiram calcular perdas anuais de 0,14, 0,35, e 72,0 g de N2O, CH4 e NH3 ave-alojada-1 ano-1, respectivamente. Considerando o número de frangos de corte alojados em 2015, a atividade avícola emitiu cerca de 545,1 Gg CO2eq pelo manejo dos dejetos nos aviários, correspondente a 0,04 kg CO2eq por kg de carne. Reduções de 21, 40 e 78% foram observadas nas emissões anuais de N2O, CH4 e NH3, respectivamente, ao utilizar (seis ciclos) a cama somente em um ciclo de criação. Contudo, um balanço de N foi conduzido para contabilizar as entradas e saídas de N na produção de frangos de corte durante os quatro ciclos de criação avaliados. A principal entrada de N no sistema foi pela ração, como entrada secundária, o N via cama de frango, o qual aumentou consideravelmente a cada ciclo de reutilização. Considerando que esta pesquisa apresenta uma metodologia aplicável e inovadora para determinar os fluxos de GEE em galpões abertos no país, os dados serão úteis para o inventário anual brasileiro das emissões de GEE oriundas dos dejetos da avicultura de corte. Os resultados são úteis também para incentivar novas pesquisas que possam avançar no conhecimento de impactos e alternativas de mitigação de GEE na produção de frangos de corte e, adicionalmente, conferir sustentabilidade à produção de carne no Brasil

A weakly-supervised Bayesian model for violence detection from social media

Social streams have proven to be the mostup-to-date and inclusive information on cur-rent events. In this paper we propose a novelprobabilistic modelling framework, called violence detection model (VDM), which enables the identification of text containing violent content and extraction of violence-related topics over social media data. The proposed VDM model does not require any labeled corpora for training, instead, it only needs the in-corporation of word prior knowledge which captures whether a word indicates violence or not. We propose a novel approach of deriving word prior knowledge using the relative entropy measurement of words based on the in-tuition that low entropy words are indicative of semantically coherent topics and therefore more informative, while high entropy words indicates words whose usage is more topical diverse and therefore less informative. Our proposed VDM model has been evaluated on the TREC Microblog 2011 dataset to identify topics related to violence. Experimental results show that deriving word priors using our proposed relative entropy method is more effective than the widely-used information gain method. Moreover, VDM gives higher violence classification results and produces more coherent violence-related topics compared toa few competitive baselines.

Secagem convectiva da microalga spirulina platensis: avaliação das propriedades físicas e bioquímicas

O objetivo no presente estudo foi investigar a operação de secagem da microalga Spirulina platensis em camada delgada através da modelagem matemática e otimização da operação, avaliando as características do produto final através de análises físico-químicas. Foram analisados os dados da umidade de equilíbrio para a isoterma de adsorção a 10, 20 e 30°C e de dessorção a 40, 50 e 60°C, através dos modelos de GAB e BET. O calor isostérico foi determinado pela aplicação da equação de Clausius-Clapeyron. O modelo de GAB apresentou melhor ajuste aos dados experimentais. Os valores da área superficial calculados pelos modelos de GAB e BET foram próximos. O calor isostérico e a entropia diferencial da isoterma de dessorção apresentaram comportamento similar. A teoria da compensação entalpia-entropia foi aplicada nas isotermas, indicando que são controladas pela entalpia. A cinética de secagem foi analisada na faixa de temperatura de 50-70°C, através dos modelos de Lewis, Henderson e Pabis, Henderson, Page e Overhults. O modelo de Henderson e Pabis foi escolhido por apresentar maior significado físico para estimar o valor de difusividade efetiva (Def), sendo os valores encontrados na faixa de 5,54 - 6,60×10-11 m 2 /s, para as temperaturas de 50 e 60°C, respectivamente, e de 1,58×10-10 m2 /s para a temperatura de 70°C. A energia de ativação apresentou um valor de 47,9 kJ/mol. A secagem alterou a cor quando comparada ao material in natura. A secagem foi otimizada na faixa de espessuras e temperaturas do ar de secagem de 3-7 mm e de 50-70ºC, respectivamente, através da metodologia de superfície de resposta para ácido tiobarbitúrico (TBA) e perda de ficocianina no produto final. A melhor condição de secagem foi a 55°C e a 3,7 mm, apresentando uma perda de ficocianina de aproximadamente 37% e valor de TBA de 1,5 mgMDA/kgamostra. Nesta condição de secagem, a composição de ácidos graxos da microalga Spirulina não apresentou diferença significativa (P > 0,05) em relação a microalga in natura.

Characterization of Chimney Flue Gas Flows : Flow Rate Measurements with Averaging Pitot Probes

Performance testing methods of boilers in transient operating conditions (start, stop and combustion power modulation sequences) need the combustion rate quantified to allow for the emissions to be quantified. One way of quantifying the combustion rate of a boiler during transient operating conditions is by measuring the flue gas flow rate. The flow conditions in chimneys of single family house boilers pose a challenge however, mainly because of the low flow velocity. The main objectives of the work were to characterize the flow conditions in residential chimneys, to evaluate the use of the Pitot-static method and the averaging Pitot method, and to develop and test a calibration method for averaging Pitot probes for low

Proposição de um método de análise de movimentos de jogadores de tênis de campo a partir de vídeos televisivos = : Proposition of a method for tennis players motion analysis on broadcast videos

Universidade Estadual de Campinas . Faculdade de Educação Física

A gamma camera count rate saturation correction method for whole-body planar imaging.

Whole-body (WB) planar imaging has long been one of the staple methods of dosimetry, and its quantification has been formalized by the MIRD Committee in pamphlet no 16. One of the issues not specifically addressed in the formalism occurs when the count rates reaching the detector are sufficiently high to result in camera count saturation. Camera dead-time effects have been extensively studied, but all of the developed correction methods assume static acquisitions. However, during WB planar (sweep) imaging, a variable amount of imaged activity exists in the detector's field of view as a function of time and therefore the camera saturation is time dependent. A new time-dependent algorithm was developed to correct for dead-time effects during WB planar acquisitions that accounts for relative motion between detector heads and imaged object. Static camera dead-time parameters were acquired by imaging decaying activity in a phantom and obtaining a saturation curve. Using these parameters, an iterative algorithm akin to Newton's method was developed, which takes into account the variable count rate seen by the detector as a function of time. The algorithm was tested on simulated data as well as on a whole-body scan of high activity Samarium-153 in an ellipsoid phantom. A complete set of parameters from unsaturated phantom data necessary for count rate to activity conversion was also obtained, including build-up and attenuation coefficients, in order to convert corrected count rate values to activity. The algorithm proved successful in accounting for motion- and time-dependent saturation effects in both the simulated and measured data and converged to any desired degree of precision. The clearance half-life calculated from the ellipsoid phantom data was calculated to be 45.1 h after dead-time correction and 51.4 h with no correction; the physical decay half-life of Samarium-153 is 46.3 h. Accurate WB planar dosimetry of high activities relies on successfully compensating for camera saturation which takes into account the variable activity in the field of view, i.e. time-dependent dead-time effects. The algorithm presented here accomplishes this task.

Simple finite field method for calculation of static and dynamic vibrational hyperpolarizabilities: curvature contributions

In the static field limit, the vibrational hyperpolarizability consists of two contributions due to: (1) the shift in the equilibrium geometry (known as nuclear relaxation), and (2) the change in the shape of the potential energy surface (known as curvature). Simple finite field methods have previously been developed for evaluating these static field contributions and also for determining the effect of nuclear relaxation on dynamic vibrational hyperpolarizabilities in the infinite frequency approximation. In this paper the finite field approach is extended to include, within the infinite frequency approximation, the effect of curvature on the major dynamic nonlinear optical processes

A wavelet-based method for the determination of the relative resolution between remotely sensed images

Spatial resolution is a key parameter of all remote sensing satellites and platforms. The nominal spatial resolution of satellites is a well-known characteristic because it is directly related to the area in ground that represents a pixel in the detector. Nevertheless, in practice, the actual resolution of a specific image obtained from a satellite is difficult to know precisely because it depends on many other factors such as atmospheric conditions. However, if one has two or more images of the same region, it is possible to compare their relative resolutions. In this paper, a wavelet-decomposition-based method for the determination of the relative resolution between two remotely sensed images of the same area is proposed. The method can be applied to panchromatic, multispectral, and mixed (one panchromatic and one multispectral) images. As an example, the method was applied to compute the relative resolution between SPOT-3, Landsat-5, and Landsat-7 panchromatic and multispectral images taken under similar as well as under very different conditions. On the other hand, if the true absolute resolution of one of the images of the pair is known, the resolution of the other can be computed. Thus, in the last part of this paper, a spatial calibrator that is designed and constructed to help compute the absolute resolution of a single remotely sensed image is described, and an example of its use is presented.

Soil CO2 flux: a method comparison of closed static chambers in a sugarcane field

A large variety of techniques have been used to measure soil CO2 released from the soil surface, and much of the variability observed between locations must be attributed to the different methods used by the investigators. Therefore, a minimum protocol of measurement procedures should be established. The objectives of this study were (a) to compare different absorption areas, concentrations and volumes of the alkali trapping solution used in closed static chambers (CSC), and (b) to compare both, the optimized alkali trapping solution and the soda-lime trapping using CSC to measure soil respiration in sugarcane areas. Three CO2 absorption areas were evaluated (7; 15 and 20 % of the soil emission area or chamber); two volumes of NaOH (40 and 80 mL) at three concentrations (0.1, 0.25 and 0.5 mol L-1). Three different types of alkaline traps were tested: (a), 80 mL of 0.5 mol L-1 NaOH in glass containers, absorption area 15 % (V0.5); (b) 40 mL of 2 mol L-1 NaOH retained in a sponge, absorption area 80 % (S2) and (c) 40 g soda lime, absorption area 15 % (SL). NaOH concentrations of 0.5 mol L-1 or lower underestimated the soil CO2-C flux or CO2 flux. The lower limit of the alkali trap absorption area should be a minimum of 20 % of the area covered by the chamber. The 2 mol L-1 NaOH solution trap (S2) was the most efficient (highest accuracy and highest CO2 fluxes) in measuring soil respiration.

Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.