PRODUCT DATA MANAGEMENT FOR FINNISH SMALL AND MEDIUM-SIZED MANUFACTURING ENTERPRISES - Towards a viable information system concept

Product Data Management (PDM) systems have been utilized within companies since the 1980s. Mainly the PDM systems have been used by large companies. This thesis presents the premise that small and medium-sized companies can also benefit from utilizing the Product Data Management systems. Furthermore, the starting point for the thesis is that the existing PDM systems are either too expensive or do not properly respond to the requirements SMEs have. The aim of this study is to investigate what kinds of requirements and special features SMEs, operating in Finnish manufacturing industry, have towards Product Data Management. Additionally, the target is to create a conceptual model that could fulfill the specified requirements. The research has been carried out as a qualitative case study, in which the research data was collected from ten Finnish companies operating in manufacturing industry. The research data is formed by interviewing key personnel from the case companies. After this, the data formed from the interviews has been processed to comprise a generic set of information system requirements and the information system concept supporting it. The commercialization of the concept is studied in the thesis from the perspective of system development. The aim was to create a conceptual model, which would be economically feasible for both, a company utilizing the system and for a company developing it. For this reason, the thesis has sought ways to scale the system development effort for multiple simultaneous cases. The main methods found were to utilize platform-based thinking and a way to generalize the system requirements, or in other words abstracting the requirements of an information system. The results of the research highlight the special features Finnish manufacturing SMEs have towards PDM. The most significant of the special features is the usage of project model to manage the order-to-delivery –process. This differs significantly from the traditional concepts of Product Data Management presented in the literature. Furthermore, as a research result, this thesis presents a conceptual model of a PDM system, which would be viable for the case companies interviewed during the research. As a by-product, this research presents a synthesized model, found from the literature, to abstract information system requirements. In addition to this, the strategic importance and categorization of information systems within companies has been discussed from the perspective of information system customizations.

Ensaios em opções reais e investimento sob incerteza

Esta tese é composta por três artigos, nos quais são apresentadas extensões e aplicações da Teoria das Opções Reais, todas de interesse para formuladores de política econômica no Brasil. O primeiro faz uma análise original da questão da bioprospecção, ou a exploração da diversidade biológica para fins econômicos. Duas estruturas alternativas para o desenho do mecanismo de concessão, visando o uso sustentável da biodiversidade brasileira, são sugeridas: (i) um modelo de projetos de P&D com maturidade incerta, no qual a intensidade do processo de Poisson que governa o tempo de maturação é explicitamente dependente do nível da biodiversidade no local concedido; (ii) um modelo de Agente-Principal, onde o Estado delega o exercício da opção de investimento à empresa de pesquisa biotecnológica. O segundo artigo avança a analogia entre opções de venda (“put options”) e cotas de importação. Os parâmetros relevantes para apreçar as licenças são agora obtidos endogenamente, a partir da interação entre a firma importadora e os produtores domésticos. Por fim, no terceiro, é feita análise pioneira do mercado paralelo de títulos precatórios no Brasil. Um modelo para a valoração de tais títulos é construído e proposto, tendo por base o arcabouço institucional existente sobre o assunto, tanto no governo central, como nos estados e municípios.

An aproach for implementing knowledge management in small and medium companies in Brazil: A case study

The search for competitive advantage in a global environment must consider the use of tacit and explicit knowledge circulating inside companies. Differential factors can be easily replicated nowadays. Due to the great volume of knowledge and information, it is necessary to create a system that allows the management of important knowledge. Existing models for Knowledge Management are based on the reality at large companies. In Brazil, most of the companies are smaller ones. This work presents a simplified model to implement Knowledge Management in Small and Medium Companies in Brazil, based on a unique case study with limited scope. Despite some human and financial restrictions, Knowledge Management can help smaller companies, preserving organizational memory and increasing process efficiency. Observing a unique case prevented any generalization of the model. But the recommendations can be references to other companies, because projects like this must address the specific issues of each organization. The objective of this study is to introduce a simplified model for planning Knowledge Management at small companies in Brazil, considering their restrictions and also seeking to create a competitive advantage. Human aspects are very important in Knowledge Management, but that is not the focus of this study. The model was conceived presuming the participation of all people involved.

Industry Education: The Merger Continues

In the discussion - Industry Education: The Merger Continues - by Rob Heiman Assistant Professor Hospitality Food Service Management at Kent State University, the author originally declares, “Integrating the process of an on-going catering and banquet function with that of selected behavioral academic objectives leads to an effective, practical course of instruction in catering and banquet management. Through an illustrated model, this article highlights such a merger while addressing a variety of related problems and concerns to the discipline of hospitality food service management education.” The article stresses the importance of blending the theoretical; curriculum based learning process with that of a hands-on approach, in essence combining an in-reality working program, with academics, to develop a well rounded hospitality student. “How many programs are enjoying the luxury of excessive demand for students from industry [?],” the author asks in proxy for, and to highlight the immense need for qualified personnel in the hospitality industry. As the author describes it, “An ideal education program concerns itself with the integration of theory and simulation with hands-on experience to teach the cognitive as well as the technical skills required to achieve the pre-determined hospitality education objectives.” In food service one way to achieve this integrated learning curve is to have the students prepare foods and then consume them. Heiman suggests this will quickly illustrate to students the rights and wrongs of food preparation. Another way is to have students integrating the academic program with feeding the university population. Your author offers more illustrations on similar principles. Heiman takes special care in characterizing the banquet and catering portions of the food service industry, and he offers empirical data to support the descriptions. It is in these areas, banquet and catering, that Heiman says special attention is needed to produce qualified students to those fields. This is the real focus of the discussion, and it is in this venue that the remainder of the article is devoted. “Based on the perception that quality education is aided by implementing project assignments through the course of study in food service education, a model description can be implemented for a course in Catering and Banquet Management and Operations. This project model first considers the prioritized objectives of education and industry and then illustrates the successful merging of resources for mutual benefits,” Heiman sketches. The model referred to above is also the one aforementioned in the thesis statement at the beginning of the article. This model is divided into six major components; Heiman lists and details them. “The model has been tested through two semesters involving 29 students,” says Heiman. “Reaction by all participants has been extremely positive. Recent graduates of this type of program have received a sound theoretical framework and demonstrated their creative interpretation of this theory in practical application,” Heiman says in summation.

A narrativa histórica de Alexandre Wollner sobre o design brasileiro em sua relação com arte, indústria e tecnologia

This work aims to investigate the historical narratives in which the graphic designer Alexandre Wollner assembled about the development of its own profession in Brazil, focusing the ways in which his discourse points relations among design (with greater emphasis in graphic design) and visual arts, the industrial development and notions about technology. Firstly, the theoretical setup searched for dialogues with design historians, with Mikhail Bakhtin, specially his concepts about “ideology” and “discourse’, and the theory of Field Autonomy by Pierre Bourdieu applied in the artistic practice. Following, the relation between Wollner’s own journey and the Brazilian industrial development is shown, and, at last, three of his historical texts are studied, which are written in different moments (1964; 1983; 1998), being those in which the analyzed author wished to point out the origens, events and names that are more remarkable. Throughout the work, it is pointed the importance of Wollner’s contact with the modernist european ideologies that share an abstract and rationalist matrix found at Hochschule für Gestaltung Ulm (HfG Ulm), the german design school from the city of Ulm, in the 1950s. Such modernist discourse understood the practice of design as a method with scientific character, being then different of some other more recurring artistic professional practices in some productive sectors. Wollner aimed to apply such ideals in his professional practice, being the foundation of the paulista office forminform, in 1958, one of his first expressions of such posture, and in his academic practice, helping the foundation of the Escola Superior de Desenho Industrial (ESDI), in Rio de Janeiro, in 1963. Such modernist ideals went along with moments of the Brazilian industrial development during the government of Juscelino Kubitschek (1956–1961) and the “Economical Miracle” from the military government (1968–1973). Wollner argued about the need for the development of national design as a technological and productive differential that would help the growth of national industry, based on Ulm’s project model concept. It is defended that Wollner’s professional and intelectual path, in his efforts of thinking a history of Brazilian design through the choice of pioneers in the area, was founded on an “ideal model” of design, leaving aside the modernist experiences from the 1950s. Such posture would indicate a search for validation of his own profession that was beginning to become more evident in Brazilian productive means, aiming the creation of a differential space in comparison with pre-established practices, usually link to graphic artists from the time.

South & East Belfast Community Nursing Project - Primary Care Integrated Nursing Model (PDF 524 KB)

South & East Belfast H&SS Trust's final report on Primary Care Integrated Nursing Model. Part of the Department's redesign of community nursing project

Development of a Model for the Ice Scraping Process Iowa Department of Transportation Project HR 361 Final Report, October 1996

A laboratory study has been conducted with two aims in mind. The first goal was to develop a description of how a cutting edge scrapes ice from the road surface. The second goal was to investigate the extent, if any, to which serrated blades were better than un-serrated or "classical" blades at ice removal. The tests were conducted in the Ice Research Laboratory at the Iowa Institute of Hydraulic Research of the University of Iowa. A specialized testing machine, with a hydraulic ram capable of attaining scraping velocities of up to 30 m.p.h. was used in the testing. In order to determine the ice scraping process, the effects of scraping velocity, ice thickness, and blade geometry on the ice scraping forces were determined. Higher ice thickness lead to greater ice chipping (as opposed to pulverization at lower thicknesses) and thus lower loads. S~milabr ehavior was observed at higher velocities. The study of blade geometry included the effect of rake angle, clearance angle, and flat width. The latter were found to be particularly important in developing a clear picture of the scraping process. As clearance angle decreases and flat width increases, the scraping loads show a marked increase, due to the need to re-compress pulverized ice fragments. The effect of serrations was to decrease the scraping forces. However, for the coarsest serrated blades (with the widest teeth and gaps) the quantity of ice removed was significantly less than for a classical blade. Finer serrations appear to be able to match the ice removal of classical blades at lower scraping loads. Thus, one of the recommendations of this study is to examine the use of serrated blades in the field. Preliminary work (by Nixon and Potter, 1996) suggests such work will be fruitful. A second and perhaps more challenging result of the study is that chipping of ice is more preferable to pulverization of the ice. How such chipping can be forced to occur is at present an open question.

Comprehensive Statewide Transportation Model: Multimodal Investment Analysis Methodology Phase II, CTRE Project 02-126, 2001

The purposes of this report (Phase II of the project) are to specify in mathematical form the individual modules of the conceptual model developed in Phase I, to identify and evaluate sources of data for the model set, and to develop the transport networks necessary to support the models.

A Model for Product Transfer Project

In this thesis a model for managing the product data in a product transfer project was created for ABB Machines. This model was then applied for the ongoing product transfer project during its planning phase. Detailed information about the demands and challenges in product transfer projects was acquired by analyzing previous product transfer projects in participating organizations. This analysis and the ABB Gate Model were then used as a base for the creation of the model for managing the product data in a product transfer project. The created model shows the main tasks during each phase in the project, their sub-tasks and relatedness on general level. Furthermore the model emphasizes need for detailed analysis of the situation during the project planning phase. The created model for managing the product data in a product transfer project was applied into ongoing project two main areas; manufacturing instructions and production item data. The results showed that the greatest challenge considering the product transfer project in previously mentioned areas is the current state of the product data. Based on the findings, process and resource proposals for both the ongoing product transfer project and the BU Machines were given. For manufacturing instructions it is necessary to create detailed process instructions in receiving organizations own language for each department so that the manufacturing instructions can be used as a training material during the training in sending organization. For production item data the English version of the bill of materials needs to be fully in English. In addition it needs to be ensured that bill of materials is updated and these changes implemented before the training in sending organization begins.

Teaching project: a low-cost swine model for chest tube insertion training

Objective: to describe and evaluate the acceptance of a low-cost chest tube insertion porcine model in a medical education project in the southwest of Paraná, Brazil. Methods: we developed a low-cost and low technology porcine model for teaching chest tube insertion and used it in a teaching project. Medical trainees - students and residents - received theoretical instructions about the procedure and performed thoracic drainage in this porcine model. After performing the procedure, the participants filled a feedback questionnaire about the proposed experimental model. This study presents the model and analyzes the questionnaire responses. Results: seventy-nine medical trainees used and evaluated the model. The anatomical correlation between the porcine model and human anatomy was considered high and averaged 8.1±1.0 among trainees. All study participants approved the low-cost porcine model for chest tube insertion. Conclusion: the presented low-cost porcine model for chest tube insertion training was feasible and had good acceptability among trainees. This model has potential use as a teaching tool in medical education.

Creating risk measurement model to project portfolio management in construction company

This thesis was carried out as a case study of a company YIT in order to clarify the sev-erest risks for the company and to build a method for project portfolio evaluation. The target organization creates new living environment by constructing residential buildings, business premises, infrastructure and entire areas worth for EUR 1.9 billion in the year 2013. Company has noted project portfolio management needs more information about the structure of project portfolio and possible influences of market shock situation. With interviews have been evaluated risks with biggest influence and most appropriate metrics to examine. The major risks for the company were evaluated by interviewing the executive staff. At the same time, the most appropriate risk metrics were considered. At the moment sales risk was estimated to have biggest impact on company‟s business. Therefore project port-folio evaluation model was created and three different scenarios for company‟s future were created in order to identify the scale of possible market shock situation. The created model is tested with public and descriptive figures of YIT in a one-year-long market shock and the impact on different metrics was evaluated. Study was conducted using con-structive research methodology. Results indicate that company has notable sales risk in certain sections of business portfolio.

Net working capital estimation model in project business

The objective of this Master’s thesis is to develop a model which estimates net working capital (NWC) monthly in a year period. The study is conducted by a constructive research which uses a case study. The estimation model is designed in the need of one case company which operates in project business. Net working capital components should be linked together by an automatic model and estimated individually, including advanced components of NWC for example POC receivables. Net working capital estimation model of this study contains three parts: output template, input template and calculation model. The output template gets estimate values automatically from the input template and the calculation model. Into the input template estimate values of more stable NWC components are inputted manually. The calculate model gets estimate values for major affecting components automatically from the systems of a company by using a historical data and made plans. As a precondition for the functionality of the estimation calculation is that sales are estimated in one year period because the sales are linked to all NWC components.

Operational Flexibility: A Model for Effective Project Management

The aim of this study is to investigate the role of operational flexibility for effective project management in the construction industry. The specific objectives are to: a) Identify the determinants of operational flexibility potential in construction project management b) Investigate the contribution of each of the determinants to operational flexibility potential in the construction industry c) Investigate on the moderating factors of operational flexibility potential in a construction project environment d) Investigate whether moderated operational flexibility potential mediates the path between predictors and effective construction project management e) Develop and test a conceptual model of achieving operational flexibility for effective project management The purpose of this study is to findout ways to utilize flexibility inorder to manage uncertain project environment and ultimately achieve effective project management. In what configuration these operational flexibility determinants are demanded by construction project environment in order to achieve project success. This research was conducted in three phases, namely: (i) exploratory phase (ii) questionnaire development phase; and (iii) data collection and analysis phase. The study needs firm level analysis and therefore real estate developers who are members of CREDAI, Kerala Chapter were considered. This study provides a framework on the functioning of operational flexibility, offering guidance to researchers and practitioners for discovering means to gain operational flexibility in construction firms. The findings provide an empirical understanding on kinds of resources and capabilities a construction firm must accumulate to respond flexibly to the changing project environment offering practitioners insights into practices that build firms operational flexibility potential. Firms are dealing with complex, continuous changing and uncertain environments due trends of globalization, technical changes and innovations and changes in the customers’ needs and expectations. To cope with the increasingly uncertain and quickly changing environment firms strive for flexibility. To achieve the level of flexibility that adds value to the customers, firms should look to flexibility from a day to day operational perspective. Each dimension of operational flexibility is derived from competences and capabilities. In this thesis only the influence on customer satisfaction and learning exploitation of flexibility dimensions which directly add value in the customers eyes are studied to answer the followingresearch questions: “What is the impact of operational flexibility on customer satisfaction?.” What are the predictors of operational flexibility in construction industry? .These questions can only be answered after answering the questions like “Why do firms need operational flexibility?” and “how can firms achieve operational flexibility?” in the context of the construction industry. The need for construction firms to be flexible, via the effective utilization of organizational resources and capabilities for improved responsiveness, is important because of the increasing rate of changes in the business environment within which they operate. Achieving operational flexibility is also important because it has a significant correlation with a project effectiveness and hence a firm’s turnover. It is essential for academics and practitioners to recognize that the attainment of operational flexibility involves different types namely: (i) Modification (ii) new product development and (iii) demand management requires different configurations of predictors (i.e., resources, capabilities and strategies). Construction firms should consider these relationships and implement appropriate management practices for developing and configuring the right kind of resources, capabilities and strategies towards achieving different operational flexibility types.