Developing the Product Return Process of a Service Center With Lean Methods

Today lean-philosophy has gathered a lot of popularity and interest in many industries. This customer-oriented philosophy helps to understand customer’s value creation which can be used to improve efficiency. A comprehensive study of lean and lean-methods in service industry were created in this research. In theoretical part lean-philosophy is studied in different levels which will help to understand its diversity. To support lean, this research also presents basic concepts of process management. Lastly theoretical part presents a development model to support process development in systematical way. The empirical part of the study was performed by performing experimental measurements during the service center’s product return process and by analyzing this data. Measurements were used to map out factors that have a negative influence on the process flow. Several development propositions were discussed to remove these factors. Problems mainly occur due to challenges in controlling customers and due to the lack of responsibility and continuous improvement on operational level. Development propositions concern such factors as change in service center’s physical environment, standardization of work tasks and training. These factors will remove waste in the product return process and support the idea of continuous improvement.

Creating a Branding Process Model for Living Area Brands - Developing and managing a new living area brand

The objective of this thesis is to understand how to create and develop a successful place brand and how to manage it systematically. The thesis thoroughly explains the phenomenon of place brands and place branding and presents different sub-categories of place branding. The theoretical part of the thesis provides a wide overview on the prevailing literature of place branding, place brand development and place brand management, which form the basis of the thesis’ theoretical framework. The theoretical evidence is gathered from a case living area. The living area is developed by one construction company, which has a significant role in the construction industry in Finland. The empirical evidence is gathered through semi-structured in-depth interviews by interviewing the new living area’s carefully selected stakeholder groups. Afterwards the empirical data is analyzed and reflected to the theoretical findings. After examining the case living area, the thesis will present a new living area branding process model based on prevailing theories and empirical findings.

Developing Supply Chain Process Management and Measurement in Global Manufacturing Company

The objective of this research is to create a current state analysis of pulp supply chain processes from production planning to deliveries to customers. A cross-functional flowchart is being used to model these processes. These models help finding key performance indicators (KPIs) which enable examinations of the supply chain efficiency. Supply chain measures in different processes reveal the changes need processes that affect the whole supply chain and its efficiency and competitiveness. Structure of pulp supply chain differs from most of the other supply chains. The fact that there are big volumes of bulk products, small product variations and supply forecasts are made for the year ahead make the difference. This factor brings different benefits but also challenges when developing supply chain. This thesis divides pulp supply chain in three different main categories: production planning, warehousing and transportation. It provides tools for estimating the functionality of supply chain as well as developing the efficiency for different functions of supply chain. By having a better understanding of supply chain processes and measurement the whole supply chain structure can be developed significantly.

Generic unified modelling process for developing semantically rich, dynamic and temporal models

Models play a vital role in supporting a range of activities in numerous domains. We rely on models to support the design, visualisation, analysis and representation of parts of the world around us, and as such significant research effort has been invested into numerous areas of modelling; including support for model semantics, dynamic states and behaviour, temporal data storage and visualisation. Whilst these efforts have increased our capabilities and allowed us to create increasingly powerful software-based models, the process of developing models, supporting tools and /or data structures remains difficult, expensive and error-prone. In this paper we define from literature the key factors in assessing a model’s quality and usefulness: semantic richness, support for dynamic states and object behaviour, temporal data storage and visualisation. We also identify a number of shortcomings in both existing modelling standards and model development processes and propose a unified generic process to guide users through the development of semantically rich, dynamic and temporal models.

Methane emissions from floodplains in the Amazon Basin: challenges in developing a process-based model for global applications

Tropical wetlands are estimated to represent about 50% of the natural wetland methane (CH4) emissions and explain a large fraction of the observed CH4 variability on timescales ranging from glacial–interglacial cycles to the currently observed year-to-year variability. Despite their importance, however, tropical wetlands are poorly represented in global models aiming to predict global CH4 emissions. This publication documents a first step in the development of a process-based model of CH4 emissions from tropical floodplains for global applications. For this purpose, the LPX-Bern Dynamic Global Vegetation Model (LPX hereafter) was slightly modified to represent floodplain hydrology, vegetation and associated CH4 emissions. The extent of tropical floodplains was prescribed using output from the spatially explicit hydrology model PCR-GLOBWB. We introduced new plant functional types (PFTs) that explicitly represent floodplain vegetation. The PFT parameterizations were evaluated against available remote-sensing data sets (GLC2000 land cover and MODIS Net Primary Productivity). Simulated CH4 flux densities were evaluated against field observations and regional flux inventories. Simulated CH4 emissions at Amazon Basin scale were compared to model simulations performed in the WETCHIMP intercomparison project. We found that LPX reproduces the average magnitude of observed net CH4 flux densities for the Amazon Basin. However, the model does not reproduce the variability between sites or between years within a site. Unfortunately, site information is too limited to attest or disprove some model features. At the Amazon Basin scale, our results underline the large uncertainty in the magnitude of wetland CH4 emissions. Sensitivity analyses gave insights into the main drivers of floodplain CH4 emission and their associated uncertainties. In particular, uncertainties in floodplain extent (i.e., difference between GLC2000 and PCR-GLOBWB output) modulate the simulated emissions by a factor of about 2. Our best estimates, using PCR-GLOBWB in combination with GLC2000, lead to simulated Amazon-integrated emissions of 44.4 ± 4.8 Tg yr−1. Additionally, the LPX emissions are highly sensitive to vegetation distribution. Two simulations with the same mean PFT cover, but different spatial distributions of grasslands within the basin, modulated emissions by about 20%. Correcting the LPX-simulated NPP using MODIS reduces the Amazon emissions by 11.3%. Finally, due to an intrinsic limitation of LPX to account for seasonality in floodplain extent, the model failed to reproduce the full dynamics in CH4 emissions but we proposed solutions to this issue. The interannual variability (IAV) of the emissions increases by 90% if the IAV in floodplain extent is accounted for, but still remains lower than in most of the WETCHIMP models. While our model includes more mechanisms specific to tropical floodplains, we were unable to reduce the uncertainty in the magnitude of wetland CH4 emissions of the Amazon Basin. Our results helped identify and prioritize directions towards more accurate estimates of tropical CH4 emissions, and they stress the need for more research to constrain floodplain CH4 emissions and their temporal variability, even before including other fundamental mechanisms such as floating macrophytes or lateral water fluxes.

Developing an enterprise simulator to support electronic supply chain for B2B electronic process

The application of any e-Solution promises significant returns. In particular, using internet technologies both within enterprises and across the supply (value) chain provides real opportunity, not only for operational improvement but also for innovative strategic positioning. However, significant questions obscure potential investment; how any value will actually be created and, importantly, how this value will be shared across the value chain is not clear. This paper will describe a programme of research that is developing an enterprise simulator that will provide a more fundamental understanding of the impact of e-Solutions across operational supply chains, in terms of both standard operational and financial measures of performance. An efficient supply chain reduces total costs of operations by sharing accurate real-time information and coordinating inter-organizational business processes. This form of electronic link between organizations is known as business-to-business (B2B) e-Business. The financial measures go beyond simple cost calculations to real bottom-line performance by modelling the financial transactions that business processes generate. The paper will show how this enterprise simulator allows for a complete supply chain to be modelled in this way across four key applications: control system design, virtual enterprises, pan-supply-chain performance metrics and supporting e-Supply-chain design methodology.

By writers for writers: developing a writer-centred model of the writing process

This thesis, set within an Action Research framework, details the development and validation of a writer-centred model of the writing process. The model was synthesised within the boundaries of a writers’ group for MA students. The initial data collected, and analysed using the principles of grounded theory, were retrospective descriptions of group members’ writing processes. After initial analysis, additional data, from group members’ writing, and from audio recordings, were used for further analysis, and to form a model of the writing process. To ascertain whether the model had value outside the specific context in which it was made, it was validated from three different perspectives. Firstly, the retrospective descriptions of other writers were collected and analysed, using the model as a framework. Secondly, the model was presented at academic conferences; comments about the model, made by members of the audience, were collected and analysed. Finally, the model was used in writing courses for PhD students. Comments from these students, along with questionnaire responses, were collected and the content analysed. Upon examination of all data sources, the model was updated to reflect additional insights arising from the analysis. Analysis of the data also indicated that the model is useable outside its original context. Potential uses for the model are 1) raising awareness of the process of writing, 2) putting writers at ease, 3) serving as a starting point for individuals or groups to design their own models of the writing process, and 4) as a tool to help writers take control of their writing processes.

Developing and evaluating a methodology for business process improvement

Purpose – There appears to be an ever-insatiable demand from markets for organisations to improve their products and services. To meet this, there is a need to provide business process improvement (BPI) methodologies that are holistic, structured and procedural. Therefore, this paper describes research that has formed and tested a generic and practical methodology termed model-based and integrated process improvement (MIPI) to support the implementation of BPI; and to validate its effectiveness in organisations. This methodology has been created as an aid for practitioners within organisations. Design/methodology/approach – The research objectives were achieved by: reviewing and analysing current methodologies, and selecting a few frameworks against key performance indicators. Using a refined Delphi approach and semi-structured interview with the “experts” in the field. Intervention, case study and process research approach to evaluating a methodology. Findings – The BPI methodology was successfully formed and applied by the researcher and directly by the companies involved against the criteria of feasibility, usability and usefulness. Research limitations/implications – The paper has demonstrated a new knowledge on how to systematically assess a BPI methodology in practice. Practical implications – Model-based and integrated process improvement methodology (MIPI) methodology offers the practitioner (experienced and novice) a set of step-by-step aids necessary to make informed, consistent and efficient changes to business processes. Originality/value – The novelty of this research work is the creation of a holistic workbook-based methodology with relevant tools and techniques. It extends the capabilities of existing methodologies.

A review of the information-gathering process for the provision of medicines for self-medication via community pharmacies in developing countries

Background: Currently, no review has been completed regarding the information-gathering process for the provision of medicines for self-medication in community pharmacies in developing countries. Objective: To review the rate of information gathering and the types of information gathered when patients present for self-medication requests. Methods: Six databases were searched for studies that described the rate of information gathering and/or the types of information gathered in the provision of medicines for self-medication in community pharmacies in developing countries. The types of information reported were classified as: signs and symptoms, patient identity, action taken, medications, medical history, and others. Results: Twenty-two studies met the inclusion criteria. Variations in the study populations, types of scenarios, research methods, and data reporting were observed. The reported rate of information gathering varied from 18% to 97%, depending on the research methods used. Information on signs and symptoms and patient identity was more frequently reported to be gathered compared with information on action taken, medications, and medical history. Conclusion: Evidence showed that the information-gathering process for the provision of medicines for self-medication via community pharmacies in developing countries is inconsistent. There is a need to determine the barriers to appropriate information-gathering practice as well as to develop strategies to implement effective information-gathering processes. It is also recommended that international and national pharmacy organizations, including pharmacy academics and pharmacy researchers, develop a consensus on the types of information that should be reported in the original studies. This will facilitate comparison across studies so that areas that need improvement can be identified. © 2013 Elsevier Inc.