A critical review: Why isn't "cold pasteurization" being used widespread as a method to prevent food-related illnesses as a result of the consumption of ready-to-eat, fresh fruits, and vegetables

The Centers for Disease Control estimates that foodborne diseases cause approximately 76 million illnesses, 325,000 hospitalizations, and 5,000 deaths in the United States each year. The American public is becoming more health conscious and there has been an increase in the dietary intake of fresh fruits and vegetables. Affluence and demand for convenience has allowed consumers to opt for pre-processed packaged fresh fruits and vegetables. These pre-processed foods are considered Ready-to-Eat. They have many of the advantages of fresh produce without the inconvenience of processing at home. After seeing a decline in food-related illnesses between 1996 and 2004, due to an improvement in meat and poultry safety, tainted produce has tilted the numbers back. This has resulted in none of the Healthy People 2010 targets for food-related illness reduction being reached. Irradiation has been shown to be effective in eliminating many of the foodborne pathogens. The application of irradiation as a food safety treatment has been widely endorsed by many of the major associations involved with food safety and public health. Despite these endorsements there has been very little use of this technology to date for reducing the disease burden associated with the consumption of these products. A review of the available literature since the passage of the 1996 Food Quality Protection Act was conducted on the barriers to implementing irradiation as a food safety process for fresh fruits and vegetables. The impediments to adopting widespread utilization of irradiation food processing as a food safety measure involve a complex array of legislative, regulatory, industry, and consumer issues. The FDA’s approval process limits the expansion of the list of foods approved for the application of irradiation as a food safety process. There is also a lack of capacity within the industry to meet the needs of a geographically dispersed industry.^

Dynamic simulation of chemical plant

This thesis describes the design and implementation of a new dynamic simulator called DASP. It is a computer program package written in standard Fortran 77 for the dynamic analysis and simulation of chemical plants. Its main uses include the investigation of a plant's response to disturbances, the determination of the optimal ranges and sensitivities of controller settings and the simulation of the startup and shutdown of chemical plants. The design and structure of the program and a number of features incorporated into it combine to make DASP an effective tool for dynamic simulation. It is an equation-oriented dynamic simulator but the model equations describing the user's problem are generated from in-built model equation library. A combination of the structuring of the model subroutines, the concept of a unit module, and the use of the connection matrix of the problem given by the user have been exploited to achieve this objective. The Executive program has a structure similar to that of a CSSL-type simulator. DASP solves a system of differential equations coupled to nonlinear algebraic equations using an advanced mixed equation solver. The strategy used in formulating the model equations makes it possible to obtain the steady state solution of the problem using the same model equations. DASP can handle state and time events in an efficient way and this includes the modification of the flowsheet. DASP is highly portable and this has been demonstrated by running it on a number of computers with only trivial modifications. The program runs on a microcomputer with 640 kByte of memory. It is a semi-interactive program, with the bulk of all input data given in pre-prepared data files with communication with the user is via an interactive terminal. Using the features in-built in the package, the user can view or modify the values of any input data, variables and parameters in the model, and modify the structure of the flowsheet of the problem during a simulation session. The program has been demonstrated and verified using a number of example problems.

Optimising catalytic properties of supported sulfonic acid catalysts

Siliceous mesoporous molecular sieves (SBA-15) have been functionalised with propylsulfonic acid groups by both co-condensing 3-mercaptopropyltrimethoxysilane with the solid at the synthesis (sol-gel) stage and by grafting the same compound to pre-prepared SBA-15, followed, in both cases, by oxidation to sulfonic acid. The acidic and catalytic properties of the supported sulfonic acids prepared in the two ways have been compared, using ammonia adsorption calorimetry and the benzylation reaction between benzyl alcohol and toluene. Using a combination of X-ray photoelectron spectroscopy and other analytical techniques, the level of functionalisation and the extent of subsequent oxidation of tethered thiol to sulfonic acid, both in the bulk and close to the surface of SBA-15 particles, have been assessed. The research shows that the co-condensing route leads to higher levels of functionalisation than the grafting route. The extent of oxidation of added thiol to acid groups is similar using the two routes, about 70% near the surface and only 50% in the bulk. Comparison is made with polymer supported sulfonic acid catalysts, Amberlysts 15 and 35, and Nafion. Nafion shows the highest acid strength and the highest specific catalytic activity of all materials studied. Amongst the other materials, average acid strengths are broadly similar but there appears to be a relationship between the concentration of acid sites on the catalysts and their specific activity in the benzylation reaction. A model is proposed to explain this, in which clustering of sulfonic acid groups, even to a small extent, leads to disproportionately enhanced catalytic activity. © 2009 Elsevier B.V. All rights reserved.

Cabazitaxel for Hormone-Relapsed Metastatic Prostate Cancer Previously Treated With a Docetaxel-Containing Regimen: An Evidence Review Group Perspective of a NICE Single Technology Appraisal

As part of its single technology appraisal (STA) process, the National Institute for Health and Care Excellence (NICE) invited the company that manufactures cabazitaxel (Jevtana(®), Sanofi, UK) to submit evidence for the clinical and cost effectiveness of cabazitaxel for treatment of patients with metastatic hormone-relapsed prostate cancer (mHRPC) previously treated with a docetaxel-containing regimen. The School of Health and Related Research Technology Appraisal Group at the University of Sheffield was commissioned to act as the independent Evidence Review Group (ERG). The ERG produced a critical review of the evidence for the clinical and cost effectiveness of the technology based upon the company's submission to NICE. Clinical evidence for cabazitaxel was derived from a multinational randomised open-label phase III trial (TROPIC) of cabazitaxel plus prednisone or prednisolone compared with mitoxantrone plus prednisone or prednisolone, which was assumed to represent best supportive care. The NICE final scope identified a further three comparators: abiraterone in combination with prednisone or prednisolone; enzalutamide; and radium-223 dichloride for the subgroup of people with bone metastasis only (no visceral metastasis). The company did not consider radium-223 dichloride to be a relevant comparator. Neither abiraterone nor enzalutamide has been directly compared in a trial with cabazitaxel. Instead, clinical evidence was synthesised within a network meta-analysis (NMA). Results from TROPIC showed that cabazitaxel was associated with a statistically significant improvement in both overall survival and progression-free survival compared with mitoxantrone. Results from a random-effects NMA, as conducted by the company and updated by the ERG, indicated that there was no statistically significant difference between the three active treatments for both overall survival and progression-free survival. Utility data were not collected as part of the TROPIC trial, and were instead taken from the company's UK early access programme. Evidence on resource use came from the TROPIC trial, supplemented by both expert clinical opinion and a UK clinical audit. List prices were used for mitoxantrone, abiraterone and enzalutamide as directed by NICE, although commercial in-confidence patient-access schemes (PASs) are in place for abiraterone and enzalutamide. The confidential PAS was used for cabazitaxel. Sequential use of the advanced hormonal therapies (abiraterone and enzalutamide) does not usually occur in clinical practice in the UK. Hence, cabazitaxel could be used within two pathways of care: either when an advanced hormonal therapy was used pre-docetaxel, or when one was used post-docetaxel. The company believed that the former pathway was more likely to represent standard National Health Service (NHS) practice, and so their main comparison was between cabazitaxel and mitoxantrone, with effectiveness data from the TROPIC trial. Results of the company's updated cost-effectiveness analysis estimated a probabilistic incremental cost-effectiveness ratio (ICER) of £45,982 per quality-adjusted life-year (QALY) gained, which the committee considered to be the most plausible value for this comparison. Cabazitaxel was estimated to be both cheaper and more effective than abiraterone. Cabazitaxel was estimated to be cheaper but less effective than enzalutamide, resulting in an ICER of £212,038 per QALY gained for enzalutamide compared with cabazitaxel. The ERG noted that radium-223 is a valid comparator (for the indicated sub-group), and that it may be used in either of the two care pathways. Hence, its exclusion leads to uncertainty in the cost-effectiveness results. In addition, the company assumed that there would be no drug wastage when cabazitaxel was used, with cost-effectiveness results being sensitive to this assumption: modelling drug wastage increased the ICER comparing cabazitaxel with mitoxantrone to over £55,000 per QALY gained. The ERG updated the company's NMA and used a random effects model to perform a fully incremental analysis between cabazitaxel, abiraterone, enzalutamide and best supportive care using PASs for abiraterone and enzalutamide. Results showed that both cabazitaxel and abiraterone were extendedly dominated by the combination of best supportive care and enzalutamide. Preliminary guidance from the committee, which included wastage of cabazitaxel, did not recommend its use. In response, the company provided both a further discount to the confidential PAS for cabazitaxel and confirmation from NHS England that it is appropriate to supply and purchase cabazitaxel in pre-prepared intravenous-infusion bags, which would remove the cost of drug wastage. As a result, the committee recommended use of cabazitaxel as a treatment option in people with an Eastern Cooperative Oncology Group performance status of 0 or 1 whose disease had progressed during or after treatment with at least 225 mg/m(2) of docetaxel, as long as it was provided at the discount agreed in the PAS and purchased in either pre-prepared intravenous-infusion bags or in vials at a reduced price to reflect the average per-patient drug wastage.

Características de las malformaciones congénitas en recién nacidos del Hospital Vicente Corral Moscoso, 2010-2014

Objetivo Determinar la prevalencia de las malformaciones congénitas y las características de las madres y de los recién nacidos malformados en el Hospital Vicente Corral Moscoso. Metodología Se realizó un estudio de tipo descriptivo (se determinó la prevalencia por año), se revisaron las historias clínicas de las madres con recién nacidos entre el periodo del 2010 al 2014. Para recolectar la información se empleó un formulario pre elaborado, los datos se agruparon según la clasificación del CIE-10 y se tabularan usando Microsoft Excel. Para el análisis de los datos se utilizó el software estadístico SPSS versión 15. Se describieron las variables del estudio de acuerdo a las medidas estadísticas apropiadas. Resultados La prevalencia de las malformaciones congénitas fue de 1.70 por cada 100 recién nacidos. Las mujeres entre 20 a 24 años, presentaron el mayor porcentaje de recién nacidos malformados con un 34.95%. Los recién nacidos malformados fueron mayoritariamente del sexo masculino con 53.83%. El grupo de malformación más frecuente fueron las malformaciones y deformidades congénitas del sistema osteomuscular con 18.88%, de las cuales la gastrosquisis fue la más frecuente, representada por el 4.85%. El síndrome polimalformativo fue el tipo de malformación congénita con el mayor porcentaje con un 10.71%. Conclusiones El presente estudio revela que la prevalencia encontrada de recién nacidos con malformaciones congénitas, fue similar a investigaciones previas a nivel regional y local. Se incluyeron únicamente las malformaciones que constituyen alteraciones morfológicas evidentes, encontrándose una mayor frecuencia del síndrome polimalformativo

Estudo da formulação de pré-misturas secas para a cimentação de poços em terra

An economical solution for cementing oil wells is the use of pre-prepared dry mixtures containing cement and additives. The mixtures may be formulated, prepared and transported to the well where is added water to be pumped.Using this method, becomes dispensable to prepare the cement mixes containing additives in the cementing operation, reducing the possibility of error. In this way, the aim of this work is to study formulations of cement slurries containing solid additives for primary cementing of oil wells onshore for typical depths of 400, 800 and 1,200 meters. The formulations are comprised of Special Class Portland cement, mineral additions and solids chemical additives.The formulated mixtures have density of 1.67 g / cm ³ (14.0 lb / gal). Their optimization were made through the analysis of the rheological parameters, fluid loss results, free water, thickening time, stability test and mechanical properties.The results showed that mixtures are in conformity the specifications for cementing oil wells onshore studied depths

Efeito da adição de cargas minerais leves na resistência mecânica de grautes para cimentação de poços offshore

The preparation of cement slurries for offshore well cementing involves mixing all solid components to be added to the mixing water on the platform. The aim of this work was to study the formulation of pre-prepared dry mixtures, or grouts, for offshore oilwell cementing. The addition of mineral fillers in the strength of lightweight grouts applied for depths down to 400 m under water depths of 500 m was investigated. Lightweight materials and fine aggregates were selected. For the choice of starting materials, a study of the pozzolanic activity of low-cost fillers such as porcelain tile residue, microsilica and diatomaceous earth was carried out by X-ray diffraction and mechanical strength tests. Hardened grouts containing porcelain tile residue and microsilica depicted high strength at early ages. Based on such preliminary investigation, a study of the mechanical strength of grouts with density 1.74 g/cm3 (14.5 lb/gal) cured initially at 27 °C was performed using cement, microsilica, porcelain tile residue and an anti-foaming agent. The results showed that the mixture containing 7% of porcelain tile residue and 7% of microsilica was the one with the highest compressive strength after curing for 24 hours. This composition was chosen to be studied and adapted for offshore conditions based on testes performed at 4 °C. The grout containing cement, 7% of porcelain tile residue, 7% of active silica and admixtures (CaCl2), anti-foaming and dispersant resulted satisfactory rheology and mechanical strength after curing for 24 hours of curing

National food consumption surveys: micronutrient intakes and the role of fortified foods in the diets of Irish pre-school children and adults

This research investigated the micronutrient intakes of Irish pre-school children (1-4 years) and adults (18-64 years) and the role that fortified foods (FFs) play in the diets of these population groups. Dietary intake data were collected as part of the National Pre-school Nutrition Survey (NPNS) (2010-2011) and the National Adult Nutrition Survey (NANS) (2008-2010) using 4-day food and beverage records. Nutrient intakes were estimated using WISP©, which encompasses McCance and Widdowson’s The Composition of Foods and the Irish Food Composition Database. A FF is one in which one or more micronutrients are added. Key dietary sources of micronutrients in NPNS and NANS were “milk”, “meat & meat products”, “breakfast cereals”, “fruit & fruit juices” and “breads”. In general, intakes of most micronutrients were adequate with the exception of iron (1 year old children and adult women) and vitamin D (in all population groups). Small proportions of the pre-school population had intakes which exceeded the upper level (UL) (zinc: 11%, folic acid: 5%, retinol: 4%, copper: 2%). Less than 2% of adults had intakes of iron, copper, zinc and vitamin B6 which exceeded the UL. FFs were consumed by 97% of pre-school children and 82% of adults, representing 17% and 9% of mean daily energy intake respectively. Relative to energy intake, FFs contributed substantially greater proportions to intakes of key micronutrients, such as iron and vitamin D. FFs were effective in reducing the prevalence of inadequate micronutrient intakes in these population groups, particularly for iron in women and 1 year old children. FFs made a significant contribution to folate intake in women of childbearing age (72µg). FFs contributed greater proportions of carbohydrate and lower proportions of fat to the diets of consumers. Voluntary addition of nutrients to foods did not contribute appreciably to intakes exceeding the UL in these population groups.

Composition of foods : fruits and fruit juices : raw, processed, prepared /

Mode of access: Internet.

Nutritive value of foods purchased by dependent families; a study of grocery orders of 233 families on relief in Alameda county, California, prepared for the Heller committee for research in social economics of the University of California,

Mimeographed.

Attitudes and behaviors of pre-adolescents with diabetes toward fat -modified foods

Fat modified foods are widely available and have the potential to help individuals with diabetes, including children, achieve a lower total fat and saturated fat intake. Sixty-three pre-adolescents (10-13 years) with insulin-dependent diabetes mellitus (IDDM or Type I), and 60 without diabetes (boys, n=54; girls, n=69) were tested to determine their beliefs and attitudes towards high-fat and reduced-fat foods. In addition, both children and parents were asked about the child's use of low fat foods i.e., how often the parent bought or encouraged their child to eat reduced-fat food; how strongly the doctor or dietitian promoted the use of reduced-fat foods, and the child's concern about dietary fat. In this study, preadolescents with diabetes were not more likely than those without diabetes to use fat-modified foods. Parental and health care practitioner encouragement is associated with greater use of these products by children.

The heart of quality teaching : a values-based pedagogy for pre-service teacher education

In an ever changing world the adults of the future will be faced with many challenges. To cope with these challenges it seems apparent that values education will need to become paramount within a child.s education. A considerable number of research studies have indicated that values education is a critical component within education (Lovat & Toomey, 2007b). Building on this research Lovat (2006) claimed that values education was the missing link in quality teaching The concept of quality teaching had risen to the fore within educational research literature in the late 20th century with the claim that it is the teacher who makes the difference in schooling (Hattie, 2004). Thus, if teachers make such a difference to student learning, achievement and well-being, then it must hold true that pre-service teacher education programmes are vital in ensuring the development of quality teachers for our schools. The gap that this current research programme addressed was to link the fields of values education, quality teaching and pre-service teacher education. This research programme aimed to determine the impact of a values-based pedagogy on the development of quality teaching dimensions within pre-service teacher education. The values-based pedagogy that was investigated in this research programme was Philosophy in the Classroom. The research programme adopted a nested case study design based on the constructivist-interpretative paradigm in examining a unit within a pre-service teacher education programme at a Queensland university. The methodology utilised was qualitative where the main source of data was via interviews. In total, 43 pre-service teachers participated in three studies in order to determine if their involvement in a unit where the focus was on introducing pre-service teachers to an explicit values-based pedagogy impacted on their knowledge, skills and confidence in terms of quality teaching dimensions. The research programme was divided into three separate studies in order to address the two research questions: 1. In what ways do pre-service teachers perceive they are being prepared to become quality teachers? 2. Is there a connection between an explicit values-based pedagogy in pre-service teacher education and the development of pre-service teachers. understanding of quality teaching? Study One provided insight into 21 pre-service teachers. understandings of quality teaching. These 21 participants had not engaged in an explicit values-based pedagogy. Study Two involved the interviewing of 22 pre-service teachers at two separate points in time . prior to exposure to a unit that employed a values-explicit pedagogy and post this subject.s lecture content delivery. Study Three reported on and analysed individual case studies of five pre-service teachers who had participated in Study Two Time 1 and Time 2, as well as a third time following their field experience where they had practice in teaching the values explicit pedagogy. The results of the research demonstrate that an explicit values-based pedagogy introduced into a teacher education programme has a positive impact on the development of pre-service teachers. understanding of quality teaching skills and knowledge. The teaching and practice of a values-based pedagogy positively impacted on pre-service teachers with increases of knowledge, skills and confidence demonstrated on the quality teaching dimensions of intellectual quality, a supportive classroom environment, recognition of difference, connectedness and values. These findings were reinforced through the comparison of pre-service teachers who had participated in the explicit values-based pedagogical approach, with a sample of pre-service teachers who had not engaged in this same values-based pedagogical approach. A solid values-based pedagogy and practice can and does enhance pre-service teachers. understanding of quality teaching. These findings surrounding the use of a values-based pedagogy in pre-service teacher education to enhance quality teaching knowledge and skills has contributed theoretically to the field of educational research, as well having practical implications for teacher education institutions and teacher educators.

Psychological wellbeing of refugees resettling in Australia : a literature review prepared for the Australian Psychological Society

This literature review was developed as background for the formulation of an Australian Psychological Society position on the mental health and wellbeing of refugees resettling in Australia. The major aim is to provide a broad overview of the concerns related to refugee mental health and wellbeing within the Australian context. To begin, a brief overview of the definition of a refugee and the scope of refugee movement is provided. Next, the review examines the pre-displacement, post-displacement, systemic and socio-political factors that influence the process of adaptation in refugee resettlement. It then reviews documented approaches to psychological assessment and therapeutic interventions with refugees; and finally it summarises suggestions for assessment and intervention in these practice contexts.

Model for internal porosity development of different shaped foods

Three particular geometrical shapes of foods were prepared from food materials. Cuboidal (aspect ratio = 1:1, 2:1, 3:1) , cylindrical (length: dameter = 1:1, 2:1, 3:1) and spheres were selected from potato, beans and peas respectively. Internal porosity was determined from solid density (theoretical)and particle density (experimental) during fluidised bed drying at different moisture contents. Solid density was calculated using formulae (conservation of mass and volume) already published in the literature by previous researchers. Determined porosity values were correlated with moisture ratio for different geometrical shapes.