Effects of post-harvest treatments on the carbohydrate composition of yacon roots in the Peruvian Andes

Yacon (Smallanthus sonchifolius [Poepp. & Endl.] H. Robinson) is an under-exploited native root crop of the Andes, which stores oligofructans (fructo-oligosaccharides, FOS) as its main component of dry matter (DM). FOS are of increasing economic interest because of their low caloric value in human diets and bifidogenic benefits on colon health. Two on-farm experiments were conducted to: (i) determine the effect of shaded, short-term storage at 1990 and 2930 m a.s.l. in the Andean highlands; and (ii) address the effects of a traditional sunlight exposure (‘sunning’) on the carbohydrate composition in the DM of tuberous yacon roots. After a 6-day shade storage FOS concentrations were smaller at the lower (36–48% of DM) than at the higher altitude (39–58% of DM). After 12 days FOS concentrations were nearly equal at both sites (27–39% of DM). The concentration of free sugars (fructose, glucose, sucrose) increased accordingly from 29–34 to 48–52%. During the 6-day sunning experiment FOS concentrations decreased from 50–62 to 29–44% and free sugars increased from 29–34 to 45–51%. The results indicate that partial hydrolysis of oligofructans starts shortly after harvest. Storage in highland environments should wherever possible exploit the cooler temperatures at higher altitudes. Sunning of yacon’s tuberous roots effectively reduces much of the roots’ water content, in this experiment 40%, and thus allows energy to be saved if yacon is processed into dehydrated products.

Bdellovibrio bacteriovorus HD100 guards against Pseudomonas tolaasii brown-blotch lesions on the surface of post-harvest Agaricus bisporus supermarket mushrooms

BACKGROUND: Pseudomonas tolaasii is a problematic pathogen of cultured mushrooms, forming dark brown 'blotches' on mushroom surfaces and causing spoilage during crop growth and post-harvest . Treating P. tolaasii infection is difficult, as other, commensal bacterial species such as Pseudomonas putida are necessary for mushroom growth, so treatments must be relatively specific. RESULTS: We have found that P. tolaasii is susceptible to predation in vitro by the δ-proteobacterium Bdellovibrio bacteriovorus. This effect also occurred in funga, where B. bacteriovorus was administered to post-harvest mushroom caps before and after administration of the P. tolaasii pathogen. A significant, visible improvement in blotch appearance, after incubation, was observed on administration of Bdellovibrio. A significant reduction in viable P. tolaasii cell numbers, recovered from the mushroom tissue, was detected. This was accompanied by a more marked reduction in blotch severity on Bdellovibrio administration. We found that there was in some cases an accompanying overgrowth of presumed-commensal, non-Pseudomonas bacteria on post-harvest mushroom caps after Bdellovibrio-treatment. These bacteria were identified (by 16SrRNA gene sequencing) as Enterobacter species, which were seemingly resistant to predation. We visualised predatory interactions occuring between B. bacteriovorus and P. tolaasii on the post-harvest mushroom cap surface by Scanning Electron Microscopy, seeing predatory invasion of P. tolaasii by B. bacteriovorus in funga. This anti-P. tolaasii effect worked well in post-harvest supermarket mushrooms, thus Bdellovibrio was not affected by any pre-treatment of mushrooms for commercial/consumer purposes. CONCLUSIONS: The soil-dwelling B. bacteriovorus HD100 preys upon and kills P. tolaasii, on mushroom surfaces, and could therefore be applied to prevent spoilage in post-harvest situations where mushrooms are stored and packaged for sale.

Use of TD-GC-TOF-MS to assess volatile composition during post harvest storage in seven accessions of rocket salad (Eruca sativa)

An important step in breeding for nutritionally enhanced varieties is determining the effects of the post-harvest supply chain on phytochemicals and the changes in VOCs produced over time. TD- GC-TOF-MS was used and a technique for the extraction of VOCs from the headspace using portable tubes is described. Forty-two compounds were detected; 39 were identified by comparison to NIST libraries. Thirty-five compounds had not been previously reported in Eruca sativa. Seven accessions were assessed for changes in headspace VOCs over 7 days. Relative amounts of VOCs across 3 time points were significantly different - isothiocyanate-containing molecules being abundant on 'Day 0'. Each accession showed differences in proportions/types of volatiles produced on each day. PCA revealed a separation of VOC profiles according to the day of sampling. Changes in VOC profiles over time could provide a tool for assessment of shelf-life.

Chemical treatment of post-harvest Marandu grass seed residues with different moisture contents

Objetivou-se avaliar o efeito do tratamento químico com ureia (3 ou 5% na MS) e amônia anidra (3% na MS) no feno de resíduo pós-colheita de sementes de Brachiaria brizantha, cv. Marandu, contendo diferentes teores de umidade (15, 25 ou 30%). O delineamento experimental foi em blocos ao acaso com oito tratamentos e quatro repetições (camadas de fardos dentro das pilhas). O feno tratado com 3% de amônia anidra com 15% de umidade ocasionou redução de 84,3 para 79,1% nos teores de fibra em detergente neutro (FDN) e elevação de 37,3 para 55,5% na digestibilidade in vitro da matéria seca (MS) em relação ao grupo controle. A variação na umidade não alterou de maneira significativa a ação da amônia, cujos valores médios foram 77,6% de FDN e 57,3% de digestibilidade in vitro da MS. O feno com 5% de ureia reduziu os teores de FDN de 84,3 para 79,6% em relação ao feno não-tratado, o que tornou necessário o aumento da umidade para 30% para maior efeito sobre a digestibilidade da MS, que aumentou 12 unidades percentuais.

Use of Natural Products for Post-Harvest Preservation of 'Vega' Cut Roses

Use of natural products as floral preservatives has helped to reduce the indiscriminate use of chemical products in flower preservation. In this study, we tested the ability of certain natural products to maintain the quality and to increase the commercial durability of 'Vega' cut roses. We employed a randomized factorial design with six post-harvest treatments and four evaluation dates. The following treatments were tested: 1) distilled water; 2) methyl jasmonate (350 mu M) applied in a four-hour pulse; 3) methyl jasmonate (500 mu M) spraying; 4) mint oil (100 ppm); 5) ginger oil (100 ppm); and 6) propolis (0.05%) as a maintenance solution. Flowers were kept at 20+/-2 degrees C and 67+/-3% RH. Physiological and qualitative evaluations were conducted. Natural products had a beneficial effect on the shelf life of the flowers. However, for all evaluated parameters, the methyl jasmonate spray was the most efficient treatment to maintain floral quality, resulting in less fresh-mass loss and a lower flower respiratory rate. Methyl jasmonate spray also improved the maintenance of coloration, relative water content and concentration of reducing sugars, thus extending the shelf life of roses.

Modeling systems and vis/NIR device to improve peach and nectarine pre and post-harvest fruit maturity management

During the last decade peach and nectarine fruit have lost considerable market share, due to increased consumer dissatisfaction with quality at retail markets. This is mainly due to harvesting of too immature fruit and high ripening heterogeneity. The main problem is that the traditional used maturity indexes are not able to objectively detect fruit maturity stage, neither the variability present in the field, leading to a difficult post-harvest management of the product and to high fruit losses. To assess more precisely the fruit ripening other techniques and devices can be used. Recently, a new non-destructive maturity index, based on the vis-NIR technology, the Index of Absorbance Difference (IAD), that correlates with fruit degreening and ethylene production, was introduced and the IAD was used to study peach and nectarine fruit ripening from the “field to the fork”. In order to choose the best techniques to improve fruit quality, a detailed description of the tree structure, of fruit distribution and ripening evolution on the tree was faced. More in details, an architectural model (PlantToon®) was used to design the tree structure and the IAD was applied to characterize the maturity stage of each fruit. Their combined use provided an objective and precise evaluation of the fruit ripening variability, related to different training systems, crop load, fruit exposure and internal temperature. Based on simple field assessment of fruit maturity (as IAD) and growth, a model for an early prediction of harvest date and yield, was developed and validated. The relationship between the non-destructive maturity IAD, and the fruit shelf-life, was also confirmed. Finally the obtained results were validated by consumer test: the fruit sorted in different maturity classes obtained a different consumer acceptance. The improved knowledge, leaded to an innovative management of peach and nectarine fruit, from “field to market”.

A comparison of ground cover and frequency estimation methods for post-harvest soil monitoring

The amount and type of ground cover is an important characteristic to measure when collecting soil disturbance monitoring data after a timber harvest. Estimates of ground cover and bare soil can be used for tracking changes in invasive species, plant growth and regeneration, woody debris loadings, and the risk of surface water runoff and soil erosion. A new method of assessing ground cover and soil disturbance was recently published by the U.S. Forest Service, the Forest Soil Disturbance Monitoring Protocol (FSDMP). This protocol uses the frequency of cover types in small circular (15cm) plots to compare ground surface in pre- and post-harvest condition. While both frequency and percent cover are common methods of describing vegetation, frequency has rarely been used to measure ground surface cover. In this study, three methods for assessing ground cover percent (step-point, 15cm dia. circular and 1x5m visual plot estimates) were compared to the FSDMP frequency method. Results show that the FSDMP method provides significantly higher estimates of ground surface condition for most soil cover types, except coarse wood. The three cover methods had similar estimates for most cover values. The FSDMP method also produced the highest value when bare soil estimates were used to model erosion risk. In a person-hour analysis, estimating ground cover percent in 15cm dia. plots required the least sampling time, and provided standard errors similar to the other cover estimates even at low sampling intensities (n=18). If ground cover estimates are desired in soil monitoring, then a small plot size (15cm dia. circle), or a step-point method can provide a more accurate estimate in less time than the current FSDMP method.

Fruit quality sensing:Post-harvest ripeness

Firmness sensing of selected varieties of apples, pears and avocado fruits has been developed using a nondestructive impact technique. In addition to firmness measurements, postharvest ripeness of apples and pears was monitored by spectrophotometric reflectance measurements, and that of avocadoes by Hunter colour measurements. The data obtained from firmness sensing were analyzed by three analytical procedures: principal component, correlation and regression, and stepwise discriminant analysis. A new software was developed to control the impact test, analyse the data, and sort the fruit into specified classes, based on the criteria obtained from a training procedure. Similar procedures were used to analyse the reflectance and colour data. Both sensing systems were able to classify fruits w i th good accuracy.

Characterisation of three ACC synthase gene family members during post-harvest-induced senescence in broccoli (Brassica oleracea L. var. italica)

We investigated the gene expression profiles of different members of the 1-aminocyclopropane-1-carboxilic acid (ACC) synthase (EC 4.4.1.14) gene family in broccoli (Brassica oleracea L. var. italica) during the post-harvest-induced senescence process. Using RT-PCR, three different cDNAs coding for ACC synthase (BROCACS1, BROCACS2 and BROCACS3) were amplified from floret tissue at the start of the senescence process. The three genes share relatively little homology, but have highly homologous sequences in Arabidopsis thaliana, and could be functionally related to these counterparts. Southern analyses suggest that BROCACS1 and BROCACS3 are present as single copy genes, while there are probably two copies of BROCACS2. All three genes showed different expression patterns: BROCACS1 is likely to be either wound - or mechanical stress-induced showing high transcript levels after harvesting, but no detectable expression afterwards. BROCACS2 shows steady expression throughout senescence, increasing at the latest stages, and BROCACS3 is almost undetectable until the final stages. Our results suggest that BROCACS1 could be required to initiate the senescence process, while BROCACS2 would be the main ACC synthase gene involved throughout the post-harvest-induced senescence. BROCACS3's expression pattern indicates that it is not directly involved in the initial stages of senescence, but in the final remobilization of cellular resources.

Acibenzolar-S-methyl and methyl jasmonate treatments of glasshouse-grown freesias suppress post-harvest petal specking caused by Botrytis cinerea

Compounds that activate host plant defence responses potentially offer socio-environmentally sound alternative methods for disease control. In a series of glasshouse trials over 2 years, pre-harvest sprays with acibenzolar-S-methyl (ASM) and methyl jasmonate (MeJA) were tested for suppression of post-harvest infection of cut Freesia hybrida L. flowers by Botrytis cinerea. For the ASM treatments, variability in reducing the incidence of B. cinerea disease was observed between years freesia varieties, incubation temperatures and ASM concentrations. In the first year, the greatest reductions in lesion numbers on ASM-treated var. 'Cote d'Azur' were recorded using 2.86 mM ASM. For three different post-harvest temperature regimes, the relative reductions in lesion numbers, compared to untreated controls, were 45% at 5 degrees C, 40% at 12 degrees C and 30% at 20 degrees C, respectively. In the second year, lesion numbers were most reduced using 1.43 mM ASM to treat freesia var. 'Dukaat' flowers. Here, the relative reductions were to 44% at 5 degrees C, 26% at 12 degrees C and 51% at 20 degrees C. MeJA treatments were, in general, more consistently effective than ASM treatments in reducing lesion numbers and lesion diameters on cut freesia flowers. MeJA-treated (0.2 mM) freesia flowers (var. 'Dukaat') incubated at 20 degrees C showed relative reductions of 62%, and 45% for lesion number and lesion diameter, respectively. The differing efficacy between ASM and MeJA treatments could be attributed to their differential abilities to induce the salicylic acid (SA)-mediated vs. the jasmonic acid (JA)-mediated host defence pathways, respectively.

Variation in carotenoid content of kale and other vegetables:a review of pre- and post-harvest effects

Lutein and zeaxanthin are carotenoids that are selectively taken up into the macula of the eye, where they are thought to protect against the development of age-related macular degeneration. They are obtained from dietary sources, with the highest concentrations found in dark green leafy vegetables, such as kale and spinach. In this Review, compositional variations due to variety/cultivar, stage of maturity, climate or season, farming practice, storage, and processing effects are highlighted. Only data from studies which report on lutein and zeaxanthin content in foods are reported. The main focus is kale; however, other predominantly xanthophyll containing vegetables such as spinach and broccoli are included. A small amount of data about exotic fruits is also referenced for comparison. The qualitative and quantitative composition of carotenoids in fruits and vegetables is known to vary with multiple factors. In kale, lutein and zeaxanthin levels are affected by pre-harvest effects such as maturity, climate, and farming practice. Further research is needed to determine the post-harvest processing and storage effects of lutein and zeaxanthin in kale; this will enable precise suggestions for increasing retinal levels of these nutrients.