Projektien resurssien hallinnan parantaminen Loviisan voimalaitoksella

Työn tavoitteena oli löytää NCC:n (Nuclear Competence Center) toimintaympäristöön sopivat resurssien hallinnan ratkaisumallit työkaluineen. Tarkoituksena oli saada näkemys siitä mitä tulisi tehdä, jotta projektien resurssien hallintaa pystyttäisiin parantamaan. Työssä käydään läpi resurssisuunnittelua ja resurssien hallintaa kokonaisvaltaisesti. Tärkein keskittymisalue on kuitenkin resurssien hallinta moniprojektiympäristössä. Työssä on haastateltu projektipäälliköitä ja muita resurssiongelmien kanssa tekemisissä olevia, jotta saadaan kuva siitä, mikä resurssien hallinnan nykytilanne on ja miten sitä halutaan kehittää. Haastatteluiden pohjalta on tehty ehdotuksia resurssien hallinnan toteuttamiseksi. Tuloksista tärkeimmäksi voisi todeta sen, että resurssien hallinnan parantaminen ei ole helppoa ja se tulee vaatimaan monia toimintatapamuutoksia. Lisäksi tällä hetkellä resurssien hallintaa ei luultavasti ole mahdollista toteuttaa valmisohjelman avulla, joten ainakin toistaiseksi olisi järkevintä toteuttaa resurssien hallinta Excel-ratkaisun avulla.

Análise da aplicação da gestão de projetos por corrente crítica nos processos de desenvolvimento de produtos e na gestão de portfólio de um fabricante de aeronaves

Pós-graduação em Engenharia de Produção - FEB

Multi-party risk management helps manage cement plant construction in Thailand

Several parties (stakeholders) are involved in a construction project. The conventional Risk Management Process (RMP) manages risks from a single party perspective, which does not give adequate consideration to the needs of others. The objective of multi-party risk management is to assist decision-makers in managing risk systematically and most efficiently in a multi-party environment. Multi-party Risk Management Processes (MRMP) consist of risk identification, structuring, analysis and developing responses from all party perspectives. The MRMP has been applied to a cement plant construction project in Thailand to demonstrate its effectiveness.

Gestão de multi-projeto no processo de desenvolvimento de produto

No âmbito da unidade curricular Dissertação/Projeto/Estágio do 2º ano do Mestrado em Engenharia mecânica – Ramo Gestão Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho de dissertação foi enquadrado num projeto de desenvolvimento de ferramentas de apoio à gestão de projetos. O projeto foi desenvolvido no Instituto de Engenharia Mecânica e Gestão Industrial (INEGI) na unidade de Desenvolvimento de Produto e Sistemas (DPS). A realização deste projeto teve como objetivo o desenvolvimento e adequação de ferramentas de apoio à gestão de multi-projeto no processo de desenvolvimento de produto na organização em estudo – o INEGI – DPS. A gestão de projetos tem hoje uma grande importância nos resultados das empresas essencialmente em virtude da necessidade de estas competirem num mundo em grande mudança com concorrentes ferozes, em que a capacidade de responder às mudanças a tempo e de uma forma integrada se torna cada vez mais importante. A atividade levada a cabo pela DPS impõe a necessidade de uma gestão de projetos mais eficaz e eficiente suportada numa gestão de informação centralizada. O presente projeto de investigação teve, numa primeira fase, uma adaptação à organização em estudo. De seguida, foi conduzida uma revisão da literatura com o objetivo de se obter a fundamentação teórica necessária ao desenvolvimento de ferramentas com base nas metodologias lean. Prosseguiu com o levantamento da situação inicial da organização e com a identificação dos problemas existentes na gestão de projetos. Incluiu também uma revisão e análise das ferramentas existentes na unidade em estudo. Este conhecimento permitiu delinear uma visão para guiar o desenvolvimento das ferramentas. Após a definição da visão foi, então, realizado o desenvolvimento das ferramentas de auxílio à gestão multi-projeto na organização. A concretização deste trabalho resultou no desenvolvimento de três ferramentas de auxílio à gestão multi-projeto na unidade. Estas ferramentas tornam o processo de gestão de projetos mais simples e fácil de assimilar, requerendo apenas alguns inputs por parte dos colaboradores. Estas ferramentas estão apoiadas nos pilares do lean, e deste modo estão vocacionadas para reduzir o desperdício, promover a melhoria contínua, aumentar o desempenho global dos vários atores nos projetos de modo a entregar mais valor e qualidade superior com menores custos. Acima de tudo, valorizar o trabalho dos colaboradores, tornando-os mais eficientes, eficazes, motivados e comprometidos com a organização.

Multi-GPU support on the marrow algorithmic skeleton framework

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Management of interdependency in project portfolio

Project management has evolved in recent decades. Project portfolio management, together with multi project management, is an emerging area in the project management field in practice, and correspondingly in academic research and forums. In multi project management, projects cannot be handled isolated from each other, as they often have interdependencies that have to be taken into account. If the interdependencies between projects are evaluated during the selection process, the success rate of the project portfolio is increased. Interdependencies can be human resources, technological, and/or market based. Despite of the fact that interdependency as a phenomenon has roots in the 1960s and is related to famous management theories, it has not been much studied, although in practice most companies use it to great extent. There exists some research on interdependency, but prior publications have not emphasized the phenomenon per se, because a practical orientation practitioner techniques prevails in the literature. This research applies the method triangulation, electronic surveys and multiple case study. The research concentrates on small to large companies in Estonia and Finland, mainly in construction, engineering, ICT, and machinery industries. The literature review reveals that interdependencies are deeply involved in R&D and innovation. Survey analysis shows that companies are aware of interdependency issues in general, but they i have lack of detailed knowledge to use it thoroughly. Empirical evidence also indicates that interdependency techniques influence the success rate and other efficiency aspects to different extents. There are a lot of similarities in interdependency related managerial issues in companies of varying sizes and countries in Northern Europe. Differences found in the study are for instance the fact that smaller companies face more difficulties in implementing and evaluating interdependency procedures. Country differences between Estonia and Finland stem from working solutions to manage interdependencies on a daily basis.historical and cultural reasons, such as the special features of a transition country compared to a mature country. An overview of the dominant problems, best practices, and commonly used techniques associated with interdependency is provided in the study. Empirical findings show that many interdependency techniques are not used in practice. A multiple case study was performed in the study to find out how interdependencies are managed in real life on a daily basis. The results show that interdependencies are mostly managed in an informal manner. A description of managing the interdependencies and implementation procedures is given. Interdependency procedures are hard to implement, especially in smaller companies. Companies have difficulties in implementing interdependency procedures and evaluating them. The study contains detailed results on how companies have implemented working solutions to manage interdependencies on a daily basis

Application of the scrum framework in non-software project management

Scrum is an agile project management approach that has been widely practiced in the software development projects. It has proven to increase quality, productivity, customer satisfaction, transparency and team morale among other benefits from its implementation. The concept of scrum is based on the concepts of incremental innovation strategies, lean manufacturing, kaizen, iterative development and so on and is usually contrasted with the linear development models such as the waterfall method in the software industry. The traditional approaches to project management such as the waterfall method imply intensive upfront planning and approval of the entire project. These sort of approaches work well in the well-defined stable environments where all the specifications of the project are known in the beginning. However, in the uncertain environments when a project requires continuous development and incorporation of new requirements, they do not tend to work well. The scrum framework was inspiraed by Nonaka’s article about new product developement and was later adopted by software development practitioners. This research explores conditions for and benefits of the application of scrum framework beyond software development projects. There are currently a few case studies on the scrum implementation in non-software projects, but there is a noticeable trend of it in the scrum practitioners’ community. The research is based on the real-life context multiple case study analysis of three different non-software projects. The results of the research showed that in order to succeed within scrum projects need to satisfy certain conditions – necessary and sufficient. Among them the key factors are uncertainty of the project environment, not well defined outcomes, commitment of the scrum teams and management support. The top advantages of scrum implementation identified in the present research include improved transparency, accountability, team morale, communications, cooperation and collaboration. Further researches are advised to be carried out in order to validate these findings on a larger sample and to focus on more specific areas of scrum project management implementation.

Supplier segmentation and development in project business

The purpose of this study was to expand the applicability of supplier segmentation and development approaches to the project-driven construction industry. These practices are less exploited and not well documented in this operational environment compared to the process-centric manufacturing industry. At first, portfolio models to supply base segmentation and various supplier development efforts were investigated in literature review. A step-wise framework was structured for the empirical research. The empirical study employed multiple research methods in three case studies in a large Finnish construction company. The first study categorized the construction item classes into the purchasing portfolio and positioned suppliers to the power matrix by investigating buyer-supplier relations. Using statistical tests, the study also identified factors that affect suppliers’ performance. The final case study identified improvement areas of the interface between a main contractor and one if its largest suppliers. The final results indicate that only by assessing the supply base in a holistic manner and the power circumstances in it, buyers comprehend how to best establish appropriate supplier development strategies in the project environment.

Operational Flexibility: A Model for Effective Project Management

The aim of this study is to investigate the role of operational flexibility for effective project management in the construction industry. The specific objectives are to: a) Identify the determinants of operational flexibility potential in construction project management b) Investigate the contribution of each of the determinants to operational flexibility potential in the construction industry c) Investigate on the moderating factors of operational flexibility potential in a construction project environment d) Investigate whether moderated operational flexibility potential mediates the path between predictors and effective construction project management e) Develop and test a conceptual model of achieving operational flexibility for effective project management The purpose of this study is to findout ways to utilize flexibility inorder to manage uncertain project environment and ultimately achieve effective project management. In what configuration these operational flexibility determinants are demanded by construction project environment in order to achieve project success. This research was conducted in three phases, namely: (i) exploratory phase (ii) questionnaire development phase; and (iii) data collection and analysis phase. The study needs firm level analysis and therefore real estate developers who are members of CREDAI, Kerala Chapter were considered. This study provides a framework on the functioning of operational flexibility, offering guidance to researchers and practitioners for discovering means to gain operational flexibility in construction firms. The findings provide an empirical understanding on kinds of resources and capabilities a construction firm must accumulate to respond flexibly to the changing project environment offering practitioners insights into practices that build firms operational flexibility potential. Firms are dealing with complex, continuous changing and uncertain environments due trends of globalization, technical changes and innovations and changes in the customers’ needs and expectations. To cope with the increasingly uncertain and quickly changing environment firms strive for flexibility. To achieve the level of flexibility that adds value to the customers, firms should look to flexibility from a day to day operational perspective. Each dimension of operational flexibility is derived from competences and capabilities. In this thesis only the influence on customer satisfaction and learning exploitation of flexibility dimensions which directly add value in the customers eyes are studied to answer the followingresearch questions: “What is the impact of operational flexibility on customer satisfaction?.” What are the predictors of operational flexibility in construction industry? .These questions can only be answered after answering the questions like “Why do firms need operational flexibility?” and “how can firms achieve operational flexibility?” in the context of the construction industry. The need for construction firms to be flexible, via the effective utilization of organizational resources and capabilities for improved responsiveness, is important because of the increasing rate of changes in the business environment within which they operate. Achieving operational flexibility is also important because it has a significant correlation with a project effectiveness and hence a firm’s turnover. It is essential for academics and practitioners to recognize that the attainment of operational flexibility involves different types namely: (i) Modification (ii) new product development and (iii) demand management requires different configurations of predictors (i.e., resources, capabilities and strategies). Construction firms should consider these relationships and implement appropriate management practices for developing and configuring the right kind of resources, capabilities and strategies towards achieving different operational flexibility types.

Um ambiente multi-middleware para desenvolvimento de aplicações distribuídas

This work presents a proposal of a multi-middleware environment to develop distributed applications, which abstracts different underlying middleware platforms. This work describes: (i) the reference architecture designed for the environment, (ii) an implementation which aims to validate the specified architecture integrating CORBA and EJB, (iii) a case study illustrating the use of the environment, (iv) a performance analysis. The proposed environment allows interoperability on middleware platforms, allowing the reuse of components of different kinds of middleware platforms in a transparency away to the developer and without major losses in performance. Also in the implementation we developed an Eclipse plugin which allows developers gain greater productivity at developing distributed applications using the proposed environment

Interethnic Interaction Dynamics in the Russian Federation

The collapse of the Soviet Union at the beginning of the 1990s also meant the end of the idea of a common soviet identity incarnated in the "soviet man" and the new "historic community of the soviet people". While this idea still lives on in the generations of the 1920s to 1940s, the younger generations tend to prefer identification with family, profession, ethnic group or religion. Ms. Alexakhina set out to investigate different interethnic interaction strategies in the multi-ethnic context of the Russian Federation, with an emphasis on analysing the role of cultural and ethno-demographic characteristics of minority ethnic groups. It aimed to identify those specific patterns of interaction dynamics that have emerged in response to the political and economic transformation at present under way. The basic supposition was that the size and growth of an ethnic population are defined not only by demographic features such as fertility, mortality and net migration, but are also dependent on processes interethnic interaction and ethnic transition. The central hypothesis of the project was that the multi-ethnic and multi-cultural composition of Russia is apparently manifesting itself in the ethnic minority groups in various forms, but particularly in the form of ethnic revival and/or assimilation. The results of these complex phenomena are manifested as changes in ethnic attachments (national re-identification and language behaviour (multi-lingualism, language transition and loss of the mother tongue). The stress of the political and economic crisis has stimulated significant changes in ethnographic, social and cultural characteristics of inter-ethnic dynamics such as the rate of national re-identification, language behaviour, migration activity and the spread of mixed marriages, among both those minorities with a long history of settlement in Russia and those that were annexed during the soviet period. Patterns of language behaviour and the spread of mixed marriages were taken as the main indicators of the directions of interethnic interaction described as assimilation, ethnic revival and cultural pluralism. The first stage of the research involved a statistical analysis of census data from 1959 to 1994 in order to analyse the changing demographic composition of the largest ethnic groups of the Russian Federation. Until 1989 interethnic interaction in soviet society was distinguished by the process of russification but the political and economic transformation has stimulated the process of ethnic revival, leading to an apparent fall in the size of the Russian population due to ethnic re-identification by members of other ethnic groups who had previously identified themselves as Russian. Cross-classification of nationalities by demographic, social and cultural indicators has shown that the most important determinants of the nature of interethnic interaction are cultural factors such as religion and language affiliation. The analysis of the dynamics of language shift through the study of bilingualism and the domains of language usage for different demographic groups revealed a strong correlation between recognition of Russian as a mother tongue among some non-Russian ethnic groups and the declining size of these groups. The main conclusion from this macro-analysis of census data was the hypothesis of the growing importance of social and political factors upon ethnic succession, that ethnic identity is no longer a stable characteristic but has become dynamic in nature. In order to verify this hypothesis Ms. Alexakhina conducted a survey in four regions showing different patterns of interethnic interaction: the Karelian Republic, Buryatiya, the Nenezkii Autonomous Region and Tatarstan. These represented the west, east, north and south of the Russian Federation. Samples for the survey were prepared on the basis of census lists so as to exclude mono-Russian families in favour of mixed and ethnic-minority families. The survey confirmed the significant growth in the importance of ethnic affiliation in the everyday lives of people in the Federation following the de-centralisation of the political and economic spheres. Language was shown to be a key symbol of the consciousness of national distinction, confirmed by the fact that the process of russification has been reversed by the active mastering of the languages of titular nationalities. The results also confirmed that individual ethnic identity has ceased to be a fixed personal characteristic of one's cultural and genetic belonging, and people's social adaptation to the current political, social and economic conditions is also demonstrated in changes in individual ethnic self-identification. In general terms, the dynamic nature of national identity means that ethnic identity is at present acquiring the special features of overall social identity, for which the frequent change of priorities is an inherent feature of a person's life cycle. These are mainly linked with a multi-ethnic environment and high individual social mobility. From her results Ms. Alexakhina concludes that the development of national languages and multi-lingualism, together with the preservation of Russian as a state language, seems to be the most promising path to peaceful coexistence and the development of the national cultures of different ethnic groups within the Russian Federation.

Lo intermedio como lugar : lo intersticial, lo fronterizo y lo impreciso en la arquitectura contemporánea

1. Nuestra investigación se centra en el estudio de los “ámbitos o espacios intermedios” en momentos de la arquitectura contemporánea, en un período de transición entre finales de los años 80 y nuestros días. Pretendemos analizar cómo se presenta el ámbito intermedio en el objeto o lugar arquitectónico y su función o relación con el entorno cercano, desde el proyecto hasta su repercusión en la experiencia vivida. 2. El concepto de intermedio entendido como ámbito o espacio intersticial, fronterizo y ambivalente (o multivalente), atraviesa en la presente investigación el campo de la etimología, de la ciencia, del pensamiento y del arte, para detenerse en la arquitectura actual, llevándose a cabo una indagación concreta en el proceso de concepción, en la propuesta formal, espacial y funcional, así como en la percepción y demás experiencias o vivencias en el lugar arquitectónico. 3. En primer lugar nos proponemos estudiar y explorar el concepto de “intermedio” en sus características, funciones y ubicaciones dentro de la cultura contemporánea, detectando sus antecedentes culturales más importantes, para a continuación aplicarlo reflexivamente a obras significativas de arquitectura. La investigación se enfoca en la modalidad figural (imprecisa) de lo intermedio (en alusión al “figural” deleuziano), cuyas metáforas base son lo translúcido, la penumbra y la espuma, vinculadas al actual paradigma cultural de la complejidad (C. Jencks). A continuación se analizan las relaciones o implicaciones de dicha modalidad figural en obras de arquitectos como Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel y Bos, y Siza, comprobando su valor operativo y poniendo de manifiesto su sentido e importancia en la actualidad y en la disciplina. El estudio tiene como trasfondo el concepto de in-between de la obra de Eisenman, y utiliza conceptos de la filosofía del límite de Trías como algunos de sus principales fundamentos. 4. En cada una de las obras de arquitectura presentadas esta modalidad imprecisa se traduce en un ámbito o espacio intermedio figural específico. Son obras en las que real y virtual, matricial y objetual, arquitectura y territorio, existente y nuevo, colectivo e individual, social e íntimo, interior y exterior, y demás usos y funciones se entrelazan o funden. Son arquitecturas cuya geometría ya no se encuentra tan determinada por aspectos bi o tridimensionales del dibujo o de la construcción. A través de la manipulación de estas geometrías más o menos complejas, dinámicas e intersticiales, estas obras reflejan (o intuyen) las premisas del actual Zeitgeist: un cambio de esquemas de objetos a relaciones basado en un pensamiento más holístico, transdisciplinar, sistémico o complejo (E. Morin), y una nueva conciencia colectiva sobre la realidad que anuncia la crisis de la percepción, el cambio de paradigma y nuevos valores (F. Capra). Emerge otra forma de sentir y percibir el mundo, los lugares y los espacios, que poco a poco está cambiando el modo de pensar y dibujar la arquitectura, y consecuentemente de interaccionar con ella. 5. El sentido del espacio intermedio figural, emerge en las cada vez más complejas cualidades morfológico-espaciales y funcionales de una parte importante de la arquitectura actual. Arquitectura, geometría y tecnología informática están más entrelazadas que nunca, y de un modo más libre, para así poder indagar en nuevas formas de pensar y crear lugares en que los “espacios intermedios” que investigamos son un testimonio. El espacio arquitectónico se vuelve afectivo e interactivo, un lugar intermedio figural, formalizado por espacialidades intersticiales que parecen aludir a lo líquido, donde la forma es más matriz que configuración, el espacio más espacialidad que compartimiento, la función más versátil y multivalente que específica o autónoma, y la perplejidad, la imaginación y la evocación se entrecruzan y vuelven patentes. 6. La arquitectura de los lugares intermedios valora no solamente el “plano”, la “configuración” y la “transparencia”, sino sobre todo el “espacio” y la “relación” en sus interrelaciones con los usuarios y demás contextos. De la identidad a la relacionalidad, de la representación a la presentación, es una arquitectura que propone “otros espacios” que más que espacios son topografías y espacialidades intersticiales, de tensión, transición, transformación, relación, intercambio e interacción. Son lugares intermedios reales y virtuales, que se sirven tanto de la morfología como de la topología para conquistar nuevas espacialidades, pretendiendo salir de la estricta operación de “forming”/”morphing”/formación/”conformación” para explorar la de “spacing”/espaciamiento. Son lugares que se basan en conceptos como la zona de indiscernibilidad de Deleuze, la imagen- flujo de Buci-Glucksmann, la suspensión-entre de Sloterdijk, o el espacio no-objetivo al que se refiere José Gil, plasmándose en la arquitectura contemporánea como tropos de lo intersticial. 7. Son los lugares intermedios de la arquitectura actual, de espacialidad háptica, más “afectiva”, generativa e interactiva, donde ese ámbito intermedio transforma y es transformado, “afecta”, “con-mueve” (nos hace mover/accionar) y evoca otros lugares, otras posibilidades de espacio habitable u ocupable. Emerge lo intermedio como lugar, algo que anuncia y exhibe, de manera paradigmática y manifiesta, el monumento de Eisenman en Berlín. ABSTRACT 1. Our research focuses on the study of “in-between spaces or environments” at particular times in contemporary architecture, in a transition period from the end of the 1980’s through to today. We aim to analyse how in-between environments are presented in the architectural object or place and their function or their relationship with the nearby surroundings, from the project through to the experience had. 2. In this research, the in-between concept, understood as an interstitial, border and ambivalent (or multi-purpose) environment or space, is assessed from the viewpoint of etymology, science, thought and art, to conclude in current architecture, with specific exploration of the conception process, of the formal, spatial and functional proposal, together with the perception and other experiences in the architectural place. 3. Firstly, we aim to study and explore the “in-between” concept as regards its features, functions and locations within contemporary culture, revealing its most important cultural background, to then apply it reflexively to important works of architecture. The research focuses on the figural (imprecise) mode of in-between (in allusion to Deleuze’s “figural” approach) whose base metaphors are the translucent, semi-darkness and foam, linked to the current cultural paradigm of complexity (C. Jenks). We then go on to assess the relationships or implications of said figural mode in architectural works by Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel and Bos, and Siza, verifying their operational worth and revealing their meaning and importance today and in this discipline. The backdrop of the study is the in-between concept of Eisenman’s work and it also uses concepts from the philosophy of the limit of Trías as its main underpinnings. 4. In each of the architectural works presented, this imprecise mode is translated into a specific in-between environment or space. They are works in which real and virtual, matricial and objectual, architecture and territory, existing and new, collective and individual, social and intimate, interior and exterior and other uses and functions all intertwine or blend together. They are architectures the geometry of which is not so much determined by bi- or tri-dimensional aspects of the drawing or construction. Through the manipulation of these more or less complex, dynamic and interstitial geometries, these works reflect (or insinuate) the premises of the current Zeitgeist: A change in the scheme of objects to relationships towards a more holistic, transdisciplinary, systemic or complex thought (E. Morin), and a new collective conscience about the reality which announces the crisis of perception, the change in paradigm and new values (F. Capra). Another way of feeling and perceiving the world, places and spaces, which little by little is changing the way of thinking and drawing architecture and hence of interacting with it. 5. The meaning of figural in-between space emerges in the increasingly complex, morphological-spatial and functional qualities of a large part of architecture today. Architecture, geometry and computer technology are more than ever intertwined in a freer way to inquire into other ways of thinking and making places, where the “in-between” spaces we research are a testimony. Architectural space becomes affective and interactive, a figural in-between place, formed by interstitial spatiality which seems to allude to something liquid, where shape is more matrix than configuration, space more spatiality than compartment, its function more versatile and multi-purpose than specific or autonomous, and perplexity, imagination and evocation criss-cross each other, becoming obvious. 6. The architecture of in-between places values not only “flat”, “configuration” and “transparency”, but above all “space” and the “relationship” in its interrelations with users and other contexts. From identity to relationality, from representation to presentation, it is an architecture that proposes “other spaces”, which more than spaces are topographies and interstitial spatialities, of tension, transition, transformation, relation, exchange and interaction. They are real and virtual in-between places, that take in both morphology and topology to conquer new spatialities, aiming to depart from the strict “forming”/”morphing” operation in order to explore “spacing”. They are places that derive both from Deleuze’s indiscernibility zone concept, from Buci-Glucksmann´s image-flow concept, from Sloterdijk’s suspension-between, and from the non-objective space referred to by José Gil, and they are embodied in contemporary architecture as tropes of the interstitial. 7. They are the in-between places in architecture today, of haptic spatiality, more “affective”, generative and interactive, where that in-between environment transforms and is transformed, “affects”, “moves” (it makes us move/act) and evokes other places, other possibilities of habitable or occupiable space. The in-between emerges as a place, which paradigmatically and declaredly, Eisenman´s monument in Berlin announces and exhibits. RESUMO 1. A investigação centra-se no estudo dos “âmbitos ou espaços intermédios” em momentos da arquitectura contemporânea, no período de transição entre os finais dos anos 80 e os nossos dias. Pretende-se analisar como se apresenta o âmbito intermédio no objecto ou lugar arquitectónico e sua função ou relação com o meio envolvente, desde o projecto até à sua repercussão na experiencia vivenciada. 2. O conceito de intermédio entendido como âmbito ou espaço intersticial, fronteiriço e ambivalente (ou multivalente), atravessa na presente investigação o campo da etimologia, da ciência, do pensamento e da arte, para deter-se na arquitectura actual, realizando-se uma indagação concreta no processo de concepção, na proposta formal, espacial e funcional, assim como na percepção e demais experiencias ou vivencias no lugar arquitectónico. 3. Em primeiro lugar, explora-se o conceito de “intermédio” nas suas características, funções e concretizações na cultura contemporânea, detectando os seus antecedentes culturais mais importantes, para em seguida aplicá-lo reflexivamente a obras significativas de arquitectura. A investigação centra-se na modalidade figural (imprecisa) do intermédio (alusão ao figural deleuziano) cujas metáforas base são o translúcido, a penumbra e a espuma, relacionadas com o actual paradigma da complexidade (C. Jencks). Em seguida analisam-se as relações ou implicações da referida modalidade figural em obras de arquitectos como Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel e Bos, e Siza, como modo de comprovar o seu valor operativo e revelar o seu sentido e importância na actualidade e na disciplina. O estudo tem como referencia o conceito de in-between da obra de Eisenman, e utiliza conceitos da filosofia do limite de Trias como alguns dos seus principais fundamentos. 4. Em cada uma das obras de arquitectura apresentadas esta modalidade imprecisa traduz-se num âmbito ou espaço intermédia figural especifico. São obras nas quais real e virtual, matricial e objectual, arquitectura e território, existente e novo, colectivo e individual, social e intimo, interior e exterior, e outros usos e funções se entrelaçam ou fundem. São arquitecturas cuja geometria já não está tão determinada por aspectos bi ou tridimensionais do desenho ou da construção. Através do uso destas geometrias mais ou menos complexas, dinâmicas e intersticiais, estas obras reflectem (ou intuem) as premissas do actual zeitgeist: uma mudança de esquemas de objectos a relações para um pensamento mais holístico, transdisciplinar, sistémico ou complexo (E. Morin) e uma nova consciência colectiva sobre a realidade, que anuncia a crise da percepção, a mudança de paradigma e novos valores (F. Capra). Emerge uma outra forma de sentir e perceber o mundo, os lugares e os espaços, que gradualmente vai alterando o modo de pensar e desenhar a arquitectura, e consequentemente de interagir com ela. 5. O sentido do espaço intermédio figural, emerge nas cada vez mais complexas qualidades morfológico-espaciais e funcionais de uma parte importante da arquitectura actual. Cada vez mais, arquitectura, geometria e tecnologia informática, relacionam-se de um modo mais livre para indagar outras formas de pensar e fazer lugares, onde os espaços intermédios que investigamos são um testemunho. O espaço arquitectónico torna-se afectivo e interactivo, um lugar intermédio figural, formalizado por espacialidades intersticiais que parecem aludir ao estado liquido, onde a forma é mais matriz que configuração, o espaço mais espacialidade que compartimento, a função mais versátil e multivalente que especifica ou autónoma, e a perplexidade, a imaginação e a evocação entrecruzam-se e tornam-se patentes. 6. A arquitectura dos lugares intermédios valoriza não só o “plano”, a “configuração” e a “transparência”, mas sobretudo o” espaço” e a ”relação” nas suas inter-relações com os utentes e restante contextos. Da identidade à relacionalidade, da representação à apresentação, é uma arquitectura que propõe “outros espaços”, que além de espaços são topografias e espacialidades intersticiais, de tensão, transição, transformação, relação, intercambio e interacção. São lugares intermédios reais e virtuais que utilizam tanto a morfologia como a topologia para conquistar novas espacialidades, pretendendo ultrapassar a estrita operação de “forming”/“morphing”/formação para explorar a de “spacing”/espaçamento. São lugares que se apoiam tanto no conceito de zona de indescernibilidade de Deleuze, como na de imagem-fluxo de Buci-Glucksmann como no de suspensão–entre de Sloterdijk ou de espaço-não objectivo que refere José Gil, e se plasmam na arquitectura contemporânea como tropos do intersticial. 7. São os lugares intermédios da arquitectura actual, de espacialidade háptica, mais “afectiva”, generativa e interactiva, onde esse âmbito intermédio transforma e é transformado, “afecta”, ”co-move “(nos faz mover/agir) e evoca outros lugares, outras possibilidades de espaço habitável ou ocupável. Emerge o intermédio como lugar que, paradigmática e manifestamente, o monumento de Eisenmann em Berlim, anuncia e exibe.

Social impact assessment:A case study of a sewerage project in Barbados

The purpose of this paper is to investigate the reasons of social impacts of projects in developing countries despite of thorough impact assessment in appraisal phase of projects. A case study approach on a sewerage project in Barbados was undertaken using primary and secondary information. The study reveals that although the impact assessment report suggested appropriate mitigation measures, but they were not implemented by the contractors. The study suggests fostering an interconnected and symbiotic relationship between appraisal and implementation phases of a project in order to manage project environment. Additionally, a more vigilant and proactive supervisory role should be instituted and strengthened over time and adapted within the dictates of environmental needs. Copyright © 2005 Inderscience Enterprises Ltd.

Planning for project control through risk analysis:a case of petroleum pipeline laying

Projects that are exposed to uncertain environments can be effectively controlled with the application of risk analysis during the planning stage. The Analytic Hierarchy Process, a multiattribute decision-making technique, can be used to analyse and assess project risks which are objective or subjective in nature. Among other advantages, the process logically integrates the various elements in the planning process. The results from risk analysis and activity analysis are then used to develop a logical contingency allowance for the project through the application of probability theory. The contingency allowance is created in two parts: (a) a technical contingency, and (b) a management contingency. This provides a basis for decision making in a changing project environment. Effective control of the project is made possible by the limitation of the changes within the monetary contingency allowance for the work package concerned, and the utilization of the contingency through proper appropriation. The whole methodology is applied to a pipeline-laying project in India, and its effectiveness in project control is demonstrated.