Genitalia, acoustics and chromosomes of Urogryllus toledopizai (Orthoptera: Gryllidae)

Morphological structures of male and female genitalia and the pars stridens of a population of Urogryllus toledopizai Mello (1988) as well as the karyotype of the species are illustrated. The characteristics of song signals and associated behavior are described and information on the seasonality of the species is provided. Disagreements with the results published by other authors are discussed.

Meat yield of Callinectes bocourti A. Milne Edwards, 1879 (Crustacea, Portunidae) in Iguape, São Paulo, Brazil

The objective of the present study was to analyze the meat yield for both sexes of the crab Callinectes bocourti in the region of Iguape, Brazil. The carapace width for males was 78.1-114.0 mm (96.7 ± 9.5 mm) and for females 76.0-106.3 mm (93.0 ± 7.8 mm). In males, the total wet weight ranged from 65.53 to 224.36 g (134.04 ± 40.77 g) and for females from 56.66 to 164.74 g (105.93 ± 26.88 g). A comparison of morphological structures revealed that the greatest meat yield was in the carapace (55.1%), followed by the right chela (16.9%), the left chela (15.9%), and the legs (12.1%). The total yield from the males (28.5%) was slightly higher than that from the females (22.1%). In general, portunids yield more meat than other crab species. The results of this study will allow the optimization of meat production for this crab species. Manual meat removal makes the process more expensive. This activity could offer an alternative to the fishing communities that live exclusively from this fishery resource. © 2007 Escuela de Ciencias del Mar Pontificia Universidad Católica de Valparaíso.

Estruturas do olho do Macrobrachium amazonicum (Heller, 1862) (Crustacea, Decapoda, Palaemonidae): estudo utilizando microscopia óptica e de varredura.

O gênero Macrobrachium contém mais de 120 espécies e ocorre nas regiões tropicais e subtropicais de todo o mundo (VALENTI, 1987). São camarões de água doce da família Palaemonidae e da ordem Decapoda (RAFINESQUE, 1815; LATREILLER, 1802). No Brasil existem 18 espécies, até agora classificadas, distribuídas ao longo da bacia amazônica (MELO 2003). Entre estas, o Macrobrachium amazonicum (HELLER, 1862) conhecido popularmente como camarão-sossego ou camarão-canela, amplamente empregados na carcinicultura. Os crustáceos dispõem de estruturas sensitivas localizadas no cefalotórax, que permitem receber estímulos do meio para localizar e capturar o alimento (BARNES, 1998). Os olhos compostos estão presentes em todas as classes de crustáceo. Assim, a hipótese levantada nessa pesquisa foi que no Macrobrachium amazonicum, estes olhos são do tipo de superposição reflexiva, onde o aparelho dióptrico e o rabdômero se estendem em camadas e está separado por uma zona clara não pigmentada. Neste trabalho temos como objetivos: Avaliar os aspectos morfológicos do olho do Macrobrachium amazonicum em microscopia eletrônica de varredura; Caracterizar a morfologia das células fotorreceptoras; Descrever as estruturas morfológicas do olho do M. amazonicum; Caracterizar as relações morfométricas entre o olho e as demais estruturas do M. amazonicum. Os animais foram adquiridos no distrito de Mosqueiro nos períodos de chuvas, março de 2009 e março de 2010, com pescadores no município de Santa Bárbara, área metropolitana de Belém, e transportados para o laboratório em caixas de isopor, sendo mantidos em quarentena em um recipiente contendo uma solução de permanganato de potássio a 1,3 mg/L (CARNEIRO et al., 005). Os animais foram fixados em Davidson e Karnovisky, em seguida os olhos de cada animal foram cuidadosamente seccionados e colocados em frascos plásticos. Nas relações biométricas foram realizadas a análise de variância com α = 0,05, foi realizada com Bio Estat 5.0 para os comprimentos do olho látero-lateral e ântero-posterior dos quatro morfotipos, e SigmaPlot 11.0 e regressão linear simples, para as variáveis olho total e cefalotórax. Observou-se que o tamanho médio do cefalotórax, do corpo, do olho é respectivamente: 21,03 mm; 70,62 mm e 4,52 mm, sendo que, o peso médio do camarão foi de 7,97 g. Os valores máximos registrados dessas estruturas foram de 31,95 mm para o cefalotórax; 100,10 mm para o tamanho do corpo; 6,80 mm para o tamanho do olho e de 20,54 g para o peso do camarão. Após análise histológica foram identificadas as seguintes estruturas (Figs. 13 e 14 A-B): córnea, cone cristalino, pigmento distal, haste do cone, zona clara, cutícula, retina, rabdoma, fibras do nervo óptico e lamina. Com relação à microscopia eletrônica de varredura, foram selecionadas para observação as principais estruturas e especialmente o arranjo em seção transversal quadrada dos omatídeos (Figs. 16 A-B). As análises morfométrica e morfológica (por histologia e microscopia eletrônica de varredura) apontaram características próprias de Macrobrachium amazonicum adultos oriundos da região metropolitana de Belém. Estes achados incluem uma óptica de superposição reflexiva com olhos adaptados a percepção de estímulos luminosos.

Post-Embryonic Development in Zaprionus indianus (Diptera: Drosophilidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de forragem e composição estrutural de pastos de Brachiaria brizantha cv. Xaraés manejados em diferentes alturas de pastejo

The objective of this study was to analyze the production of dry mass, forage accumulation rate and the structural composition of Brachiaria brizantha cv. Xaraes pastures, managed under different grazing heights in continuous stocking. The experimental area was 12 hectares, divided in paddocks of one hectare each. The treatments were 15, 30, 45 and 60 cm of defoliation heights. Nellore steers were used to reach the desired heights. Every 28 days four cut samples and eight visual samples were collected for comparative performance in the experimental plots. Two grazing exclusion cages were used per treatment to estimate accumulation rates kg.ha(-1) DM. The cut material was taken to the laboratory for separation of the botanical components (green leaf, stem and senescent material), weighing and determination of dry matter. The experimental design was the completely randomized with three replicates. There were treatments effects at all seasons for the production of total mass, except in the spring. In summer and spring seasons it was observed the highest values for leaf blades (1.100 kg DM.ha(-1)). In the winter, the highest values of senescent material was observed, as expected. The average accumulation showed no significant difference among the treatments, except for stem and total mass in the summer and stem in the fall. The tillers were heavier and higher values for number of green leaves per tiller occurred in the fall, but for senescent leaves per tiller ocurred in the winter. Swards grazed at heights between 45 and 60 cm of defoliation, had good production of forage mass and leaf constituent.

Características produtivas e morfológicas do capim Tanzânia em diferentes intensidades de pastejo

The objective of this study was to determine the best height of the Tanzania grass under grazing, assessing morphological and productive characteristics of the sward. This experiment was conducted in Cidade Gaucha, Parana, where he was rated the accumulation rate and morphological characteristics of Tanzania grass pastures grazed at 20, 40, 60 and 80 cm grazing under continuous stocking with variable stocking rate for beef cattle. The experimental area was 12 hectare divided in paddocks of one hectare each. For each paddock were allocated two grazing exclusion cage for estimating herbage accumulation, and eight samples were taken every 28 days throughout the year 2010. The completely randomized design. The herbage mass of the morphological structures showed a linear positive function of sward heights. The height of defoliation did not influence the rate of herbage accumulation for any of the morphological structures: green leaf, stem + sheaths and senescent material. There were also no differences in leaf: stem ratio. All heights within the range studied provided adequate number of green leaves per tiller. Tanzania grass pastures grazed under continuous stocking between 40 and 60 cm, for providing a good association between accumulation and mass of green leaf blades, and acceptable values of the mass of stem + sheaths and senescent material. Pasture of Tanzania grass under 60 and 80 cm allow of leaves satisfactory accumulation in the autumn.

Diferenciação gonadal em Piaractus mesopotamicus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relationship between the morphology of the maxillary central incisor and horizontal and vertical measurements of the face

Purpose: In order to assist in the selection of artificial teeth for complete dentures, this study aimed to assess the relationship between horizontal and vertical measurements of the face and the morphology of the maxillary central incisor. Materials and Methods: This was a study of 50 plaster casts and 100 teleradiographs - 50 in lateral norm and 50 in frontal norm, belonging to 50 individuals, Caucasian, with a naturally optimal occlusion, matching at least four of the six keys of Andrews. Images of the upper central incisors were obtained by scanning the plaster casts (three-dimensional) and subjectively classified by three examiners as oval, triangular or quadrangular. Facial measures (vertical and horizontal) were defined by means of teleradiographs. In order to check inter-examiner agreement on the classification of central incisor, the Kappa test was used. To verify whether data had normal distribution, the Kolmogorov-Smirnov test was used ( P > 0.2) was used. One-way analysis of variance was employed to assess the association between variables (P > 0.05). Results: When vertical measurements were compared with the three incisor shapes, there was no statistically significant difference (P > 0.05): Triangular (0.54), oval (0.63) and quadrangular (0.51). Similarly, no difference (P > 0.05) was found for facial width (139.08, 143.37, 141.65), maxillary width (76.68, 78.99, 76.91) and mandibular width (103.47, 105.50, 103.11). Conclusions: The majority of cases showed that horizontal and vertical measurements of the face cannot be used as a reference for determining the morphology of the maxillary central incisor crown. It is relevant to analyze and compare other morphological structures to improve the oral health-related quality of life for the conventional denture wearer.

Desempenho zootécnico e caracterização da linhagem germinativa de peixes diploides e triploides de lambari (Astyanax altiparanae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo histológico e comparativo das papilas linguais dos cervídeos Mazama americana e Mazama gouzoubira por microscopia de luz e eletrônica de varredura

O tipo de alimentação depende do ambiente em que o animal se encontra, sendo este um fator responsável pela alteração da morfologia, como a estratificação e o nível de queratinização da língua, e a funcionalidade da mesma. Dentre as estruturas morfológicas funcionais da língua, as papilas vêm merecendo destaque devido a sua estreita relação com a dieta. Foram utilizadas duas espécies de cervídeos: cinco Mazama gouazoubira e duas Mazama americana, dividindo-se a língua em três partes: ápice, corpo e raiz. Analisou comparativamente a língua de duas espécies por meio de microscopia de luz e eletrônica de varredura. As papilas filiforme, fungiforme e valada apresentaram na língua das duas espécies estudadas, e com a mesma distribuição, mudando apenas a quantidade e formato de papilas filiformes no ápice lingual e a quantidade e disposição das papilas valadas na raiz da língua, fator este que pode ser ligado à dieta dos animais. . Além disto, sua distribuição é semelhante à de outras espécies de herbívoros.

L'apprendistato e il debutto operistico di Sergej Rachmaninov

All’ascolto dell’incompiuto Matrimonio di Musorgskij, Borodin aveva sentenziato lapidariamente: «une chose manquée». Uguale commento viene riservato tuttora alla produzione operistica di Sergej Rachmaninov. In questo caso però non ci troviamo di fronte a un teatro rivoluzionario che si trova costretto a fare un passo indietro rispetto ai principi programmatici di cui si vuol far portatore, bensì a un potenziale inespresso, a un profilo drammaturgico mai giunto a piena maturazione. L’evidente eterogeneità della produzione operistica lasciataci in eredità dal compositore non permette infatti di determinarne con chiarezza le ‘linee guida’ e ne rende problematica la collocazione nel contesto musicale a lui coevo. Scopo della presente dissertazione è indagare l’apprendistato e il debutto operistico del compositore russo attraverso l’analisi di materiale documentario, testi letterari, partiture nonché delle fonti critiche in lingua russa, difficilmente accessibili per lo studioso italiano. Il cuore dell’elaborato è un’analisi dettagliata di Aleko, un atto unico presentato nel 1892 dal compositore come prova finale al corso di ‘Libera composizione’ del Conservatorio di Mosca. L’opera viene considerata nel suo complesso come organismo drammatico-musicale autonomo (rapporto fonte/libretto, articolazione interna, sistema delle forme, costellazione dei personaggi, distribuzione delle voci, ecc.), ma inquadrata al contempo nel più ampio contesto del teatro musicale coevo (recezione critica sia da parte della pubblicistica coeva sia da parte della storiografia musicale). Viene fornita in appendice un’edizione del libretto con traduzione a fronte. Incorniciano l’analisi dell’opera un capitolo in cui si offre una rilettura estetica del ‘caso Rachmaninov’ e un aperçu sulla produzione operistica matura del compositore, alla luce delle riflessioni proposte nel corso della dissertazione.

Structural and surface property characterization of titanium dioxide nanotubes for orthopedic implants

This research focused on the to modification of the surface structure of titanium implants with nanostructured morphology of TiO2 nanotubes and studied the interaction of nanotubes with osteoblast cells to understand the parameters that affect the cell growth. The electrical, mechanical, and structural properties of TiO2 nanotubes were characterized to establish a better understanding on the properties of such nanoscale morphological structures. To achieve the objectives of this research work I transformed the titanium and its alloys, either in bulk sheet form, bulk machined form, or thin film deposited on another substrate into a surface of titania nanotubes using a low cost and environmentally friendly process. The process requires only a simple electrolyte, low cost electrode, and a DC power supply. With this simple approach of scalable nanofabrication, a typical result is nanotubes that are each approximately 100nm in diameter and have a wall thickness of about 20nm. By changing the fabrication parameters, independent nanotubes can be fabricated with open volume between them. Titanium in this form is termed onedimensional since electron transport is narrowly confined along the length of the nanotube. My Ph.D. accomplishments have successfully shown that osteoblast cells, the cells that are the precursors to bone, have a strong tendency to attach to the inside and outside of the titanium nanotubes onto which they are grown using their filopodia – cell’s foot used for locomotion – anchored to titanium nanotubes. In fact it was shown that the cell prefers to find many anchoring sites. These sites are critical for cell locomotion during the first several weeks of maturity and upon calcification as a strongly anchored bone cell. In addition I have shown that such a surface has a greater cell density than a smooth titanium surface. My work also developed a process that uses a focused and controllably rastered ion beam as a nano-scalpel to cut away sections of the osteoblast cells to probe the attachment beneath the main cell body. Ultimately the more rapid growth of osteoblasts, coupled with a stronger cell-surface interface, could provide cost reduction, shorter rehabilitation, and fewer follow-on surgeries due to implant loosening.

Geochemical parameters of sediments and water of the Black Sea, data of Cruise 8 of R/V Vityaz-2

The book presents results of comprehensive geological investigations carried out during Cruise 8 of R/V "Vityaz-2" to the western part of the Black Sea in 1984. Systematic studies in the Black Sea during about hundred years have not weakened interest in the sea. Lithological and geochemical studies of sediments in estuarine areas of the Danube and the Kyzyl-Irmak rivers, as well as in adjacent parts of the deep sea and some other areas were the main aims of the cruise. Data on morphological structures of river fans, lithologic and chemical compositions of sediments in the fans and their areal distribution, forms of occurrence of chemical elements, role of organic matter and gases in sedimentation and diagenesis are given and discussed in the book.

Abundance and biomass of benthic foraminifera in bottom sediments from the Sea of Okhotsk and the Pacific Ocean

A study of distribution of live individuals of benthic foraminifera in sediments of the Sea of Okhotsk and of the Northwestern Basin of the Pacific Ocean shows that they can be present in sediments up to depth of 30 cm and probably can live there for long periods, sometimes forming high concentrations. Living individuals in the subsurface layer often account for more than 50% of total biomass, which varies from 1 to 21 g/m**2 in different morphological structures. The largest biomass values are attained in underwater rises embedded in relatively warm, oxygen-saturated Pacific waters. Minimum total biomass concentrations occur in deep-water depressions where stagnation phenomena are observed. Foraminifera biomass everywhere decreases gradually with increasing depth from the surface of sediments regardless of relief, depth, and nature of sediments.

Terrain model of the Håkon Mosby Mud Volcano (10 m grid size)

The Håkon Mosby Mud Volcano is a natural laboratory to study geological, geochemical, and ecological processes related to deep-water mud volcanism. High resolution bathymetry of the Håkon Mosby Mud Volcano was recorded during RV Polarstern expedition ARK-XIX/3 utilizing the multibeam system Hydrosweep DS-2. Dense spacing of the survey lines and slow ship speed (5 knots) provided necessary point density to generate a regular 10 m grid. Generalization was applied to preserve and represent morphological structures appropriately. Contour lines were derived showing detailed topography at the centre of the Håkon Mosby Mud Volcano and generalized contours in the vicinity. We provide a brief introduction to the Håkon Mosby Mud Volcano area and describe in detail data recording and processing methods, as well as the morphology of the area. Accuracy assessment was made to evaluate the reliability of a 10 m resolution terrain model. Multibeam sidescan data were recorded along with depth measurements and show reflectivity variations from light grey values at the centre of the Håkon Mosby Mud Volcano to dark grey values (less reflective) at the surrounding moat.