Modelling impacts of pollution in river systems: a new dispersion model and a case study of mine discharges in the Abrud, Aries and Mures river system in Transylvania, Romania

A new model of dispersion has been developed to simulate the impact of pollutant discharges on river systems. The model accounts for the main dispersion processes operating in rivers as well as the dilution from incoming tributaries and first-order kinetic decay processes. The model is dynamic and simulates the hourly behaviour of river flow and pollutants along river systems. The model has been applied to the Aries and Mures River System in Romania and has been used to assess the impacts of potential dam releases from the Roia Montan Mine in Transylvania, Romania. The question of mine water release is investigated under a range of scenarios. The impacts on pollution levels downstream at key sites and at the border with Hungary are investigated.

The Recovery of Zinc from Butte Mine Waters

Very little work has been done towards the recovery of zinc from mine water because the zinc content of the water is generally low. As different from copper, which can very easily be replaced by iron in any of its solutions, zinc is very high up in the electro-chemical series and so the few metals above zinc, most of which are rare and hence expensive, cannot be used to replace zinc from its solution.

Assessing the Environmental Hazard of Using Seawater for Ore Processing at the Lasail Mine Site in the Sultanate of Oman

The Lasail mining area (Sultanate of Oman) was contaminated by acid mine drainage during the exploitation and processing of local and imported copper ore and the subsequent deposition of sulphide-bearing waste material into an unsealed tailings dump. In this arid environment, the use of seawater in the initial stages of ore processing caused saline contamination of the fresh groundwater downstream of the tailings dump. After detection of the contamination in the 1980s, different source-controlled remediation activities were conducted including a seepage water collection system and, in 2005, surface sealing of the tailings dump using an HDPE-liner to prevent further infiltration of meteoric water. We have been assessing the benefits of the remediation actions undertaken so far. We present chemical and isotopic (δ18O, δ 2H, 3H) groundwater data from a long-term survey (8–16 years) of the Wadi Suq aquifer along a 28 km profile from the tailings dump to the Gulf of Oman. Over this period, most metal concentrations in the Wadi Suq groundwater decreased below detection limits. In addition, in the first boreholes downstream of the tailings pond, the salinity contamination has decreased by 30 % since 2005. This decrease appears to be related to the surface coverage of the tailings pond, which reduces flushing of the tailings by the sporadic, but commonly heavy, precipitation events. Despite generally low metal concentrations and the decreased salinity, groundwater quality still does not meet the WHO drinking water guidelines in more than 90 % of the Wadi Suq aquifer area. The observations show that under arid conditions, use of seawater for ore processing or any other industrial activity has the potential to contaminate aquifers for decades.

Application of Nanofiltration to the Treatment of Acid mine Drainage Waters

This study investigated the separation of uranium and other elements in high concentrations from acid mine waters at Caldas Uranium Mining, in the southeast of Brazil, using nanofiltration membranes. Nanofiltrarion is widely used in water treatment due to the lower energy requirements and higher yields than reverse osmosis. Separation characteristics are dependent on both the molecular size and charge of the dissolved species in the feed solution as well as membrane properties. In this investigation the potential of nanofiltration to removed dissolved species like uranium from acid mine water drainage was measured. Two composite aromatic polyamide commercially membranes of FilmTec/Dow were tested and it found that uranium rejections of greater than 90% and also showed potential for the separation of aluminum and manganese.

Development of temperature-tolerant strains of Thiobacillus ferrooxidans to improve bioleaching kinetics

An isolate of Thiobacillus ferrooxidans derived from gold mine water samples was repeatedly subcultured at increasing temperatures (from 30 degrees to 42 degrees C) in 9K medium. The temperature-adapted strain was found to be more efficient in the bioleaching of pyrite mineral than the wild type. When temperature-tolerant strains were cultured repeatedly in 9K medium at 30 degrees C, the temperature tolerance was completely lost, These results indicate that the temperature tolerance was stress-dependent and not a permanent trait of the adapted strain, The potential utility of such temperature-tolerant strains of Thiobacillus ferrooxidans in sulphide mineral dissolution is demonstrated.

South Lancashire Fisheries Advisory Committee 18th October, 1978

This is the report from the South Lancashire Fisheries Advisory Committee meeting, which was held on the 18th October, 1978. It covers information on fisheries income and expenditure, the study of salmon propagation in England and Wales, work on the future programme of fisheries work and keep nets. Other sections include the report on the effects of Barnoldswick STW on Stock Beck and the River Ribble, information on the Leeds/Liverpool Canal transfer of mine water from Bickershaw Colliery and the future fishing policy of Worthington Reservoir. It also covers the report by the area fisheries officer on fishing activities including river conditions and fishing for salmon, sea trout, and coarse fish, and an update on Langcliffe hatchery. The report also looks at migratory fish movements at Waddow Weir, Winckley Hall and Locks Weir, stocking numbers of brown trout, rainbow trout and coarse fish in various rivers, pollution incidents and fish mortalities. The Fisheries Advisory Committee was part of the Regional Water Authorities, in this case the North West Water Authority. This preceded the Environment Agency which came into existence in 1996.

Mersey and Weaver Fisheries Advisory Committee 25th October, 1978

This is the report from the Mersey and Weaver Fisheries Advisory Committee meeting, which was held on the 25th October, 1978. It covers information on fisheries income and expenditure, work on the future programme of fisheries work and keep nets. Also covered is information on the effects of mine water from Bickershaw Colliery draining into the Leeds/Liverpool Canal. The section on the report by the area fisheries officer on fishing activities includes river conditions and fishing on the Cheshire Meres and an update on Tintwistle and Sankey Hatchery. Stocking numbers of coarse fish and non-migratory trout are also added, as well as pollution incidents and fish mortalities. The Fisheries Advisory Committee was part of the Regional Water Authorities, in this case the North West Water Authority. This preceded the Environment Agency which came into existence in 1996.

Regional Fisheries Advisory Committee 4th March, 1985

This is the report from the Regional Fisheries Advisory Committee meeting, which was held on the 4th March, 1985. The report contains sections on Public Water Supplies in West Cumbria, proposals for water supply for British Nuclear Fuels Limited (BNFL), and the proposals for a fish pass at Ennerdale Weir. The section on BNFL looks at the proposal of British Nuclear Fuels Limited to take more water from Wastwater. This section includes information about Wastwater, Calder Valley Boreholes, Mine Water and the River Ehen, and other groundwater investigations. The Fisheries Advisory Committee was part of the Regional Water Authorities, in this case the North West Water Authority. This preceded the Environment Agency which came into existence in 1996.

Inventário das minas de água da área do Mosteiro de Tibães: proposta preliminar de hidrogeo‐itinerários

O Mosteiro de São Martinho de Tibães localiza‐se próximo de Braga (Norte de Portugal) e foi a Casa‐mãe da Ordem Beneditina em Portugal. Este Mosteiro foi abastecido durante séculos por numerosas minas de água, a maioria das quais se encontra actualmente abandonada. Este trabalho enfatiza a importância da combinação de diferentes matérias científicas nos processos de recuperação do património mineiro abandonado, bem como de sítios geo‐arqueológicos de relevância cultural, como um exemplo do processo transformador de uma organização, no sentido de promover um segundo ciclo de vida. O objectivo deste trabalho é apresentar uma abordagem metodológica, sob o ponto de vista da geoconservação e da geodiversidade. Subsequentemente, acções específicas serão desenvolvidas para reabilitar determinadas área, com o intuito de facilitar a sua inclusão em hidrogeo‐itinerários classificados. Esta perspectiva reflecte uma importante medida para a sustentabilidade, quer para o promotor quer para o meio ambiente envolvente.

Chemical behaviour of the Wheal Jane bioremediation system

The effectiveness of remediation of the highly acidic and transition metal polluted mine water discharge from the Wheal Jane Mine by the Wheal Jane Passive Treatment Plant is described. The success of the remediation required that all the system components work as predicted. The study shows considerable success in the removal of key toxic metals and clearly demonstrates the potential for natural attenuation of acid mine drainage, particularly iron oxidation, by microbial populations. The Wheal Jane Passive Treatment Plant provides the only experimental facility of its kind. (C) 2004 Elsevier B.V. All rights reserved.

Estudo de genes envolvidos no processo de adesão do Acidithiobacillus ferrooxidans em calcopirita (CuFe'S.IND.2')

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Proposta de restauração de mata ciliar utilizando técnicas de nucleação no município de Regente Feijó

This monograph, presented in order to obtain the title of Environmental Engineer, proposes the use of nucleation techniques for the restoration of permanent preservation areas formed by three springs that contribute to the formation of Santo Anastacio river, city of Regent Feijo – São Paulo. Through Mine Water Project, landowners are encouraged to restore and conserve springs that contribute to the public water supply, being paid through the fees for environmental services. Once the simulation of this payment was reached at R$ 630.00 per year. Nucleation techniques will be proposed in order to facilitate the ecological succession, through techniques known as transposition of the soil, transposition of the branches, artificial perches and planting in groups of Anderson, totaling 81 cores covering an area of 208.3 m2 which corresponds to 1.9% of the total area to be restored. Made the survey of forest fragments in the watershed, it was found that only 12.39% of the total area has remnant vegetation

WRITING A COMMUNITY GUIDEBOOK FOR EVALUATING LOW-GRADE GEOTHERMAL ENERGY FROM FLOODED UNDERGROUND MINES FOR HEATING AND COOLING BUILDINGS

When underground mines close they often fill with water from ground and surface sources; each mine can contain millions to billions of gallons of water. This water, heated by the Earth’s geothermal energy, reaches temperatures ideal for heat pumps. The sheer scale of these flooded underground mines presents a unique opportunity for large scale geothermal heat pump setups which would not be as economically, socially, and environmentally feasible anywhere else. A literature search revealed approximately 30 instances of flooded underground mines being used to heat and cool buildings worldwide. With thousands of closed/abandoned underground mines in the U.S. and a million estimated globally, why hasn’t this opportunity been more widely adopted? This project has found perception and lack of knowledge about the feasibility to be key barriers. To address these issues, this project drafted a guidebook for former mining communities titled A Community Guide to Mine Water Geothermal Heating and Cooling.

A robust methodological approach for mine site water accounting

Over the past decade, the mining industry has come to recognise the importance of water both to itself and to others. Water accounting is a formalisation of this importance that quantifies and communicates how water is used by individual sites and the industry as a whole. While there are a number of different accounting frameworks that could be used within the industry, the Minerals Council of Australia’s (MCA) Water Accounting Framework (WAF) is an industry-led approach that provides a consistent representation of mine site water interactions regardless of their operational, social or environmental context that allows for valid comparisons between sites and companies. The WAF contains definitions of offsite water sources and destinations and onsite water use, a methodology for applying the definitions and a set of metrics to measure site performance. The WAF is comprised of two models: the Input-Output Model, which represents the interactions between sites and their surrounding community and the Operational Model, which represents onsite water interactions. Members of the MCA have recently adopted the WAF’s Input-Output Model to report on their external water interactions in their Australian operations with some adopting it on a global basis. To support this adoption, there is a need for companies to better understand how to implement the WAF in their own operations. Developing a water account is non-trivial, particularly for sites unfamiliar with the WAF or for sites with the need to represent unusual features. This work describes how to build a water account for a given site using the Input-Output Model with an emphasis on how to represent challenging situations.

Improving the accuracy of mine site water balances through improved estimation of runoff volumes

A mine site water balance is important for communicating information to interested stakeholders, for reporting on water performance, and for anticipating and mitigating water-related risks through water use/demand forecasting. Gaining accuracy over the water balance is therefore crucial for sites to achieve best practice water management and to maintain their social license to operate. For sites that are located in high rainfall environments the water received to storage dams through runoff can represent a large proportion of the overall inputs to site; inaccuracies in these flows can therefore lead to inaccuracies in the overall site water balance. Hydrological models that estimate runoff flows are often incorporated into simulation models used for water use/demand forecasting. The Australian Water Balance Model (AWBM) is one example that has been widely applied in the Australian context. However, the calibration of AWBM in a mining context can be challenging. Through a detailed case study, we outline an approach that was used to calibrate and validate AWBM at a mine site. Commencing with a dataset of monitored dam levels, a mass balance approach was used to generate an observed runoff sequence. By incorporating a portion of this observed dataset into the calibration routine, we achieved a closer fit between the observed vs. simulated dataset compared with the base case. We conclude by highlighting opportunities for future research to improve the calibration fit through improving the quality of the input dataset. This will ultimately lead to better models for runoff prediction and thereby improve the accuracy of mine site water balances.