Risk perception and correlates of alcohol use among out-of-school youth in motor parks in Lagos State, Nigeria

Background and Aim: The prevalence of alcohol use has increased globally. Out-of-school youth are a vulnerable group who might have missed opportunities for learning healthy behaviours in a formal school environment. The purpose of this study was to determine the risk perception, pattern of use, and correlates of alcohol use among out-of-school youth in Lagos, Nigeria. Methods: A cross-sectional study was conducted among 380 out-of-school youth in motor parks in Lagos State, Nigeria, using interviewer administered questionnaires. Results: The lifetime prevalence of alcohol use was 61.1%, while 55.5% were current drinkers. Beer (57.3%) was the most consumed type of alcohol, followed by distilled spirits (29.8%). Using the CAGE scoring system, more than half (57.8%) of the current drinkers had a drinking problem. Almost three quarters (70.1%) had experienced at least one episode of alcohol intoxication within the past month. A considerable number of current drinkers (63.5%) desired to reduce their alcohol intake or stop drinking, while 45.5% had made unsuccessful attempts to do so within the past year. Only 28.9% had received assistance to quit or reduce their drinking and of these less than half (39.3%) received assistance from a professional or healthcare worker. Males were more likely to be current drinkers and to have experienced episodes of alcohol intoxication. Parental and peer drinking were associated with alcohol use but not with intoxication. Conclusions: It is important to design specific programmes to reduce alcohol use among out-of-school youth in these settings.

Influence of adhesive system on quartz fiber post dislocation resistance in endodontically treated teeth

Aim: To evaluate the dislocation resistance of the quartz fiber post/cement/dentin interface after different adhesion strategies. Methods: Forty bovine lower central incisors were selected and prepared with K-files using the step-back technique, and irrigated with 3 mL of distilled water preceding the use of each instrument. Prepared teeth were stored at 37ºC and 100% humidity for 7 days. The roots were prepared and randomized into 4 groups. The quartz fiber post was cemented with an adhesion strategy according to the following groups: GBisCem- BISCEM; GOneStep±C&B- One Step ± C&B; GAllBond±C&B- AllBond3 ± C&B; GAllBondSE±C&B- AllBondSE ±C&B with a quartz fiber post. Cross-sectional root slices of 0.7 mm were produced and stored for 24 h at 37° C before being submitted to push-out bond strength. Results: The mean and standard deviation values of dislocation resistance were GBisCem: 1.12 (± 0.23) MPa, GOneStep±C&B: 0.81 (± 0.31) MPa, GAllBond±C&B: 0.98 (± 0.14) MPa, and GAllBondSE±C&B: 1.57 (± 0.04) MPa. GAllBondSE±C&B showed significantly higher values of dislocation resistance than the other groups. Conclusions: Based on this study design, it may be concluded that adhesion strategies showed different results of quartz post dislocation resistance. Simplified adhesive system with sodium benzene sulphinate incorporation provided superior dislocation resistance.

Emergent Antiferromagnetism Out Of The Hidden-order" State In Uru2si2: High Magnetic Field Nuclear Magnetic Resonance To 40 T."

Very high field (29)Si-NMR measurements using a fully (29)Si-enriched URu(2)Si(2) single crystal were carried out in order to microscopically investigate the hidden order (HO) state and adjacent magnetic phases in the high field limit. At the lowest measured temperature of 0.4 K, a clear anomaly reflecting a Fermi surface instability near 22 T inside the HO state is detected by the (29)Si shift, (29)K(c). Moreover, a strong enhancement of (29)K(c) develops near a critical field H(c) ≃ 35.6 T, and the ^{29}Si-NMR signal disappears suddenly at H(c), indicating the total suppression of the HO state. Nevertheless, a weak and shifted (29)Si-NMR signal reappears for fields higher than H(c) at 4.2 K, providing evidence for a magnetic structure within the magnetic phase caused by the Ising-type anisotropy of the uranium ordered moments.

Out of the Andes: patterns of diversification in clearwing butterflies

Global biodiversity peaks in the tropical forests of the Andes, a striking geological feature that has likely been instrumental in generating biodiversity by providing opportunities for both vicariant and ecological speciation. However, the role of these mountains in the diversification of insects, which dominate biodiversity, has been poorly explored using phylogenetic methods. Here we study the role of the Andes in the evolution of a diverse Neotropical insect group, the clearwing butterflies. We used dated species-level phylogenies to investigate the time course of speciation and to infer ancestral elevation ranges for two diverse genera. We show that both genera likely originated at middle elevations in the Andes in the Middle Miocene, contrasting with most published results in vertebrates that point to a lowland origin. Although we detected a signature of vicariance caused by the uplift of the Andes at the Miocene-Pliocene boundary, most sister species were parapatric without any obvious vicariant barrier. Combined with an overall decelerating speciation rate, these results suggest an important role for ecological speciation and adaptive radiation, rather than simple vicariance.

The Effect of Repetitive Pilot-Hole Use on the Insertion Torque and Pullout Strength of Vertebral System Screws

Study Design. In vitro biomechanical investigation of the screw-holding capacity. Objective. To evaluate the effect of repetitive screw-hole use on the insertional torque and retentive strength of vertebral system screws. Summary and Background Data. Placement and removal of vertebral system screws is sometimes necessary during the surgical procedures in order to assess the walls of the pilot hole. This procedure may compromise the holding capacity of the implant. Methods. Screws with outer diameter measuring 5, 6, and 7 mm were inserted into wood, polyurethane, polyethylene, and cancellous bone cylindrical blocks. The pilot holes were made with drills of a smaller, equal, or wider diameter than the inner screw diameter. Three experimental groups were established based on the number of insertions and reinsertions of the screws and subgroups were created according to the outer diameter of the screw and the diameter of the pilot hole used. Results. A reduction of screw-holding capacity was observed between the first and the following insertions regardless the anchorage material. The pattern of reduction of retentive strength was not similar to the pattern of torque reduction. The pullout strength was more pronounced between the first and the last insertions, while the torque decreased more proportionally from the first to the last insertions. Conclusion. Insertion and reinsertion of the screws of the vertebral fixation system used in the present study reduced the insertion torque and screw purchase.

A simplified four-branch model for the analytical study of the out-of-plane performance of regular stone URM walls

During the last years, several studies have been made aiming to assess the out-of-plane seismic response of unreinforced stone masonry structures. This fact led to the development of a wide variety of models and approaches, ranging from simple kinematic based analytical models up to complex numerical simulations. Nevertheless, for the sake of simplicity, the out-of-plane seismic response of a masonry wall pier may be obtained by means of a simple single-degree-of-freedom system while still providing good results. In fact, despite the assumptions associated with such a simple formulation, it is also true that the epistemic uncertainty inherent with the selection of appropriate input parameters in more complex models may render them truly ineffective. In this framework, this paper focuses on the study of the out-of-plane bending of unreinforced stone masonry walls (cantilevers) by proposing a simplified analytical approach based on the construction of a linearized four-branch model, which is used to characterize the linear and nonlinear response of such structural elements through an overturning moment-rotation relationship. The formulation of the four-branch model is presented and described in detail and the meaningful parameters used for its construction are obtained from a set of experimental laboratory tests performed on six full-scale unreinforced regular sacco stone masonry specimens. Moreover, a parametric analysis aiming to evaluate the effect of these parameters’ variation on the final configuration of the model is presented and critically discussed. Finally, the results obtained from the application of the developed four-branch model on real unreinforced regular sacco stone masonry walls are thoroughly analysed and the main conclusions obtained from its application are summarized.

Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influence

Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.

Out-of-plane behavior of masonry infill walls

In order to investigate the out-of-plane behaviour of masonry infill walls, quasi-static testing was performed on a masonry infill walls built inside a reinforced concrete frame by means of an airbag system to apply the uniform out-of-plane load to each component of the infill. The main advantage of this testing setup is that the out-of-plane loading can be applied more uniformly in the walls, contrarily to point load configuration. The test was performed under displacement control by selecting the mid-point of the infill as control point. Input and output air in the airbag was controlled by using a software to apply a specific displacement in the control point of the infill wall. The effect of the distance between the reaction frame of the airbag and the masonry infill on the effective contact area was previously analysed. Four load cells were attached to the reaction frame to measure the out-of-plane force. The effective contact area of the airbag was calculated by dividing the load measured in load cells by the pressure inside the airbag. When the distance between the reaction walls and the masonry infill wall is smaller, the effective area is closer to the nominal area of the airbag. Deformation and crack patterns of the infill confirm the formation of arching mechanism and two-way bending of the masonry infill. Until collapse of the horizontal interface between infill and upper beam in RC frame, the infill bends in two directions but the failure of that interface which is known as weakest interface due to difficulties in filling the mortar between bricks of last row and upper beam results in the crack opening trough a well-defined path and the consequent collapse of the infill.

Advances in the hospital management of patients following an out of hospital cardiac arrest.

The outcome for patients after an out-of-hospital cardiac arrest (OHCA) has been poor over many decades and single interventions have mostly resulted in disappointing results. More recently, some regions have observed better outcomes after redesigning their cardiac arrest pathways. Optimised resuscitation and prehospital care is absolutely key, but in-hospital care appears to be at least as important. OHCA treatment requires a multidisciplinary approach, comparable to trauma care; the development of cardiac arrest pathways and cardiac arrest centres may dramatically improve patient care and outcomes. Besides emergency medicine physicians, intensivists and neurologists, cardiologists are playing an increasingly crucial role in the post-resuscitation management, especially by optimising cardiac output and undertaking urgent coronary angiography/intervention.

Imaging of Anorectal Malformations: Finding the Way out of the Labyrinth

Purpose/Aim: To review the embryological basis of a wide spectrum of anorectal malformations (ARM), to provide anatomical schemas showing the possiblelocations of fistulas in boys and girls and to present the typical imaging findings of these complex anomalies using various imaging methods with emphasis on3T-MRI.Content Organization: 1. Embryology. 2. Imaging techniques. 3. Normal 3T-MRI pelvic anatomy. 4. Ano-rectal malformations in boys: - Classification -Anatomic schemas of location of fistulas. - Imaging studies. 5. Ano-rectal malformations in girls: - Classification - Anatomic schemas of location of fistulas. -Imaging studies. 6. Imaging of Currarino syndrome. 7. Imaging of Vacterl syndrome.Summary: ARM are a group of complex anatomical alterations characterized by an abnormal separation of genitourinary system from hindgut. The major teachingpoints of this pictorial essay are to show: - The normal anatomy of the pelvis floor and the sphincter muscle complex in 3T-MRI. - Anatomic schemas of thedifferent types of ARM in boys and girls. - Imaging findings of a wide spectrum of ARM using a multimodality approach. including colostogramm, voidingcystourethrogramm and MRI of the pelvis.

Artificial muscle to wash blood out of fibrillating atrium: an alternative to lifelong anticoagulation.

The Atripump is a motorless, volume displacement pump based on artificial muscle technology that could reproduce the pump function of normal atrium. It could help prevent blood clots due to blood stagnation and eventually avoid anticoagulation therapy in atrial fibrillation (AF). An animal study has been designed to assess mechanical effects of this pump on fibrillating atrium. The Atripump is a dome shaped silicone coated nitinol actuator. A pacemaker like control unit drives the actuator. In five adult sheep, the right atrium (RA) was exposed and dome sutured onto the epicardium. Atrial fibrillation was induced using rapid epicardial pacing (600 beats/min). Ejection fraction of the RA was obtained with intracardiac ultrasound in baseline, AF and Atripump assisted AF conditions. The dome's contraction rate was 60/min with power supply of 12V, 400 mA for 200 ms and ran for 2 hours in total. Mean temperature on the RA was 39+/-1.5 degrees C. Right atrium ejection fraction was 31% in baseline conditions, 5% and 20% in AF and assisted AF, respectively. In two animals a thrombus appeared in the right appendix and washed out once the pump was turned on. The Atripump washes blood out the RA acting as an anticoagulant device. Possible clinical implications in patients with chronic AF are prevention of embolism of cardiac origin and avoidance of hemorrhagic complication due to chronic anticoagulation.

Respiratory quotient evolution during normal pregnancy: what nutritional or clinical information can we get out of it?

Food intake increases to a varying extent during pregnancy to provide extra energy for the growing fetus. Measuring the respiratory quotient (RQ) during the course of pregnancy (by quantifying O2 consumption and CO2 production with indirect calorimetry) could be potentially useful since it gives an insight into the evolution of the proportion of carbohydrate vs. fat oxidized during pregnancy and thus allows recommendations on macronutrients for achieving a balanced (or slightly positive) substrate intake. A systematic search of the literature for papers reporting RQ changes during normal pregnancy identified 10 papers reporting original research. The existing evidence supports an increased RQ of varying magnitude in the third trimester of pregnancy, while the discrepant results reported for the first and second trimesters (i.e. no increase in RQ), explained by limited statistical power (small sample size) or fragmentary data, preclude safe conclusions about the evolution of RQ during early pregnancy. From a clinical point of view, measuring RQ during pregnancy requires not only sophisticated and costly indirect calorimeters but appears of limited value outside pure research projects, because of several confounding variables: (1) spontaneous changes in food intake and food composition during the course of pregnancy (which influence RQ); (2) inter-individual differences in weight gain and composition of tissue growth; (3) technical factors, notwithstanding the relatively small contribution of fetal metabolism per se (RQ close to 1.0) to overall metabolism of the pregnant mother.

GroEL and CCT are catalytic unfoldases mediating out-of-cage polypeptide refolding without ATP.

Chaperonins are cage-like complexes in which nonnative polypeptides prone to aggregation are thought to reach their native state optimally. However, they also may use ATP to unfold stably bound misfolded polypeptides and mediate the out-of-cage native refolding of large proteins. Here, we show that even without ATP and GroES, both GroEL and the eukaryotic chaperonin containing t-complex polypeptide 1 (CCT/TRiC) can unfold stable misfolded polypeptide conformers and readily release them from the access ways to the cage. Reconciling earlier disparate experimental observations to ours, we present a comprehensive model whereby following unfolding on the upper cavity, in-cage confinement is not needed for the released intermediates to slowly reach their native state in solution. As over-sticky intermediates occasionally stall the catalytic unfoldase sites, GroES mobile loops and ATP are necessary to dissociate the inhibitory species and regenerate the unfolding activity. Thus, chaperonin rings are not obligate confining antiaggregation cages. They are polypeptide unfoldases that can iteratively convert stable off-pathway conformers into functional proteins.