Compressive and flexural properties of hemp fiber reinforced concrete

The compressive and flexural properties of hemp fiber reinforced concretes (FRC) were examined in this paper. Natural hemp fiber was mixed using dry and wet mixing methods to fabricate the FRC. Mechanical properties of the FRC were investigated. The main factors affecting compressive and flexural properties of the FRC materials were evaluated with an orthogonal test design. Fiber content by weight has the largest effect. The method for casting hemp FRC has been optimised. Under the optimum conditions, compressive strength increased by 4 %, flexural strength increased by 9 %, flexural toughness increased by 144 %, and flexural toughness index increased by 214 %.

Properties of hemp fibre reinforced concrete composites

This research is concerned with the mechanical and physical properties of hemp fibre reinforced concrete (HFRC). An experimental program was developed based on the statistical method of fractional factors design. The variables for the experimental study were: (1) mixing method; (2) fibre content by weight; (3) aggregate size; and (4) fibre length. Their effects on the compressive and flexural performance of HFRC composites were investigated. The specific gravity and water absorption ratio of HFRC were also studied. The results indicate that the compressive and flexural properties can be modelled using a simple empirical linear expression based on statistical analysis and regression, and that hemp fibre content (by weight) is the critical factor affecting the compressive and flexural properties of HFRC.

Evaluation of bast fibre retting systems on hemp

In this paper the effect of eight different retting methods on decorticated hemp skins were analyzed. The methods were taken from six publications that looked at the retting of different bast fibres such as ramie, flax and kenaf. The fibres were batch retted in a package dye-vat at 100oC under 2 bar of pressure. The rinsed fibres were opened twice using a Shirley cotton trash separator. The opened fibre was assessed for fibre width, fibre width variation, colour and handle. It was found that the fibre that had undergone chemical retting with 7% Sodium Hydroxide (NaOH) and 0.5% Sodium Sulphite (Na2SO3) had the best diameter (18.39 micron) and the best coefficient of variation of diameter (57.32%). The fibre that was processed with 7% Sodium Hydroxide (NaOH) and 0.5% Sodium Sulphite (Na2SO3) had the whitest colour (YI D1925 = 31.61). The method treated with 1% Sodium Hydroxide (NaOH) and 1% Sodium Sulphite (Na2SO3) had the softest handle and the method treated with 1% Sodium Hydroxide (NaOH) and pre-rinsed with 0.3% Hydrochloric Acid (HCl) showed the best conversion of decorticated skins into spin able fibre (33.9% of dry green skins). It was decided that method treated with 1% Sodium Hydroxide (NaOH) and pre-rinsed with 0.3% Hydrochloric Acid (HCl) had the best fineness of fibre micron, conversion to spin able fibre (33.9% of dry green skins), whitest colour (YI D1925 = 36.13) and softest handle for the cost of chemicals involved.

A new method of evaluating the fineness and residual gum content of hemp fibres

The demand for eco-friendly apparel and technical textiles has led to a resurgence of interests in bast fibres such as hemp. The lack of fast and objective evaluation of the quality attributes of bast fibres has been a major barrier to the advancement of the bast fibre industry. One of the most important quality attributes of a fibre is its fineness. For bast fibres, the fibre fineness measurement can also reflect the degree of fibre separation during retting or degumming. The traditional method of evaluating the fineness and residual gum content of bast fibres is a very tedious process. In this paper, degummed hemp fibres have been measured for fineness on an Optical Fibre Diameter Analyser (OFDA), and the results have been co-related with the residual gum content in the fibre samples. Since hemp fibres do not have a circular cross section, it is the width of the fibre that gets measured by the OFDA instrument, and this width has been used as an indication of the fibre fineness in this paper. The findings from this study suggest that the optical method can provide a fast and objective way of evaluating the fineness of hemp fibres, and that there is a good correlation between the fibre „width‟ measurement and the residual gum content.

Potential of textile hemp in biomedical and composite applications

The fabrication of hemp fine powder was documented for the first time. The antibacterial properties of hemp powders and hemp plant extracts from textile hemp were investigated for the first time. Fabrication and characteristics of hemp powder blended polypropylene polymer composite filaments were investigated for the first time.

Suitability of magnetic nanoparticle immobilised cellulases in enhancing enzymatic saccharification of pretreated hemp biomass

Previous research focused on pretreatment of biomass, production of fermentable sugars and their consumption to produce ethanol. The main goal of the work was to economise the production process cost of fermentable sugars. Therefore, the objective of the present work was to investigate enzyme hydrolysis of microcrystalline cellulose and hemp hurds (natural cellulosic substrate) using free and immobilised enzymes. Cellulase from Trichoderma reesei was immobilised on an activated magnetic support by covalent binding and its activity was compared with that of the free enzyme to hydrolyse microcrystalline cellulose and hemp hurds on the basis of thermostability and reusability.

Omega-3 fatty acid production from enzyme saccharified hemp hydrolysate using a novel marine thraustochytrid strain

In this work, a newly isolated marine thraustochytrid strain, Schizochytrium sp. DT3, was used for omega-3 fatty acid production by growing on lignocellulose biomass obtained from local hemp hurd (Cannabis sativa) biomass. Prior to enzymatic hydrolysis, hemp was pretreated with sodium hydroxide to open the biomass structure for the production of sugar hydrolysate. The thraustochytrid strain was able to grow on the sugar hydrolysate and accumulated polyunsaturated fatty acids (PUFAs). At the lowest carbon concentration of 2%, the PUFAs productivity was 71% in glucose and 59% in the sugars hydrolysate, as a percentage of total fatty acids. Saturated fatty acids (SFAs) levels were highest at about 49% of TFA using 6% glucose as the carbon source. SFAs of 41% were produced using 2% of SH. This study demonstrates that SH produced from lignocellulose biomass is a potentially useful carbon source for the production of omega-3 fatty acids in thraustochytrids, as demonstrated using the new strain, Schizochytrium sp. DT3.

Bioprocessing of hemp hurd (Cannabis sativa) for biofuel production

 This project is based on production of biofuel from lignocellulosic waste. Hemp hurds were used for the production of ethanol. This was achieved by treating hemp at high temperature followed by enzymatic reaction and fermentation. Different techniques were used to detect the changes occurred on hemp structure and product quantification.

Screening of cannabinoids in industrial-grade hemp using two-dimensional liquid chromatography coupled with acidic potassium permanganate chemiluminescence detection

Widely known for its recreational use, the cannabis plant also has the potential to act as an antibacterial agent in the medicinal field. The analysis of cannabis plants/products in both pharmacological and forensic studies often requires the separation of compounds of interest and/or accurate identification of the whole cannabinoid profile. In order to provide a complete separation and detection of cannabinoids, a new two-dimensional liquid chromatography method has been developed using acidic potassium permanganate chemiluminescence detection, which has been shown to be selective for cannabinoids. This was carried out using a Luna 100 Å CN column and a Poroshell 120 EC-C18 column in the first and second dimensions, respectively. The method has utilized a large amount of the available separation space with a spreading angle of 48.4° and a correlation of 0.66 allowing the determination of more than 120 constituents and mass spectral identification of ten cannabinoids in a single analytical run. The method has the potential to improve research involved in the characterization of sensitive, complex matrices.