A novel intermediate in the interaction of thiosemicarbazide with sheep liver serine hydroxymethyltransferase

An unusual intermediate bound to the enzyme was detected in the interaction of thiosemicarbazide with sheep liver serine hydroxymethyltransferase. This intermediate had absorbance maxima at 464 and 440 nm. Such spectra are characteristic of resonance stabilized intermediates detected in the interaction of substrates and quasi-substrates with pyridoxal phosphate enzymes. An intermediate of this kind has not been detected in the interaction of thiosemicarbazide with other pyridoxal phosphate enzymes. This intermediate was generated slowly (t 1/2 = 4 min) following the addition of thiosemicarbazide (200 microM) to sheep liver serine hydroxymethyltransferase (5 microM). It was bound to the enzyme as evidenced by circular dichroic bands at 464 and 440 nm and the inability to be removed upon Centricon filtration. The kinetics of interaction revealed that thiosemicarbazide was a slow binding reversible inhibitor in this phase with a k(on) of 11 M-1 s-1 and a k(off) of 5 x 10(-4) s-1. The intermediate was converted very slowly (k = 4 x 10(-5) s-1) to the final products, namely the apoenzyme and the thiosemicarbazone of pyridoxal phosphate. A minimal kinetic mechanism involving the initial conversion to the intermediate absorbing at longer wavelengths and the conversion of this intermediate to the final product, as well as, the formation of pyridoxal phosphate-thiosemicarbazone directly by an alternate pathway is proposed.

Preparation, characterization and thermal decomposition of praseodymium, terbium and neodymium carbonates

The preparation of three different types of carbonates of praseodymium, neodymium and terbium has been described. The carbonates have been characterized by potentiometry, chemical analysis, X-ray crystallography, infra-red spectroscopy and by their thermal behaviour. The thermal decomposition of several carbonates has been studied exhaustively under a variety of conditions and the stoicheiometry, thermodynamics and energetics of the reactions at various stages of decomposition have been examined. The stoicheiometry of the oxides obtained as final products of decomposition has been examined.

2,1,3-Bentsoksadiatsolirakenteiset molekyylit antibakteerisina ja antiparasiittisina yhdisteinä

Aikaisemman tutkimuksen perusteella tiedettiin tiettyjen 2,1,3-bentsoksadiatsolirakenteisten molekyylien olevan aktiivisia Chlamydia pneumoniae –bakteeria vastaan. Tutkimusta lähdettiin jatkamaan ja 2,1,3-bentsoksadiatsolimolekyylien rakenne-aktiivisuusuhteista haluttiin saada lisätietoa. Tarkoituksena oli kehittää 2,1,3-bentsoksadiatsolimolekyyleille ja sen avulla muodostaa molekyylikirjasto. Syntetisoidut molekyylit haluttiin testata sekä Chlamydia pneumoniae -bakteeria että Leishmania donovani –parasiittia vastaan. Chlamydia pneumoniae –bakteeri aiheuttaa akuutteja ylä- ja alahengitystieinfektiota, kuten keuhkoputkentulehdusta. Akuutissa tulehduksessa oireet vaihtelevat huomattavasti. Chlamydia pneumoniae –bakteerilla on myös taipumus aiheuttaa kroonisia tulehduksia. Nämä ovat useissa tutkimuksissa yhdistetty kansantaloudellisesti merkittäviin sairauksiin, kuten ateroskleroosiin ja astmaan. Leishmanioosi on toiseksi yleisin loissairaus ihmisellä malarian jälkeen. Leishmania donovani –parasiitti voi aiheuttaa tappavaa viskeraalista leishmanioosia. Vuodessa leishmanioosiin kuolee yli 50 000 ihmistä. Viime vuosina leishmanioosin lääkehoidossa on esiintynyt monenlaisia ongelmia. Osat lääkkeistä ovat menettäneet tehonsa ja osalla esiintyy vakavia haittavaikutuksia. 2,1,3-Bentsoksadiatsolirakenteisille yhdisteille saatiin kehitettyä toimiva synteesireitti. Lähtöaineena käytettiin 4-amino-2-nitrobentsoehappoa, josta saatiin hapettavalla renkaansulkeutumisreaktiolla 2,1,3-bentsoksadiatsoli-5-karboksyylihappoa. Karboksyylihaposta syntetisoitiin amidi-välituotteen kautta 2,1,3-bentsoksadiatsoli-5-karbonitriiliä. Hydroksyyliamiini hydrokloridin avulla 2,1,3-bentsoksadiatsoli-5-karbonitriilistä muodostettiin vastaavaa karboksimidamidia, joka oli synteesireitin yhteinen välituote kaikille molekyyleille. Viimeisessä vaiheessa N´-hydroksidi-2,1,3-bentsoksadiatsoli-5-karboksimidamidin annettiin reagoida joko fenyyli-isosyanaatin tai fenyyli-isotiosyanaatin kanssa, jolloin saatiin lopputuotetta. Synteesireitin kehittäminen osoittautui haastavaksi ja loppujen lopuksi saatiin ainoastaan kolme lopputuotetta syntetisoitua. Yksi lopputuotteista testattiin C. pneumoniae –bakteeria vastaan Åbo akademissa Turussa. Testattavaa yhdiste ei sisältänyt 2,1,3-bentsoksadiatsoliarengasta ja bioaktiivisuuskokeen tulos oli odotusten mukainen. Yhdiste ei ollut aktiivinen C. pneumoniae –bakteeria vastaan alhaisilla konsentraatioilla ja tuloksesta voitiin todeta 2,1,3-bentsoksadiatsolirengaan olevan tärkeä aktiivisuuden kannalta. Kaksi lopputuotetta saatiin testaukseen Leishamania donovani –parasiittia vastaan Israeliin. Ainoastaan toinen molekyyleistä sisälsi 2,1,3-bentsoksadiatsolirakenteen. Bioaktiivisuuskokeiden tulokset olivat erittäin rohkaisevia. Yhdisteet olivat aktiivisia parasiittia vastaan jo alhaisilla konsentraatioilla. Kuitenkin 2,1,3-bentsoksadiatsolirakenteinen molekyyli oli aktiivisempi, joten tämäkin aktiivisuuskokeen perusteella huomattiin rengasrakenteen olevan tärkeä aktiivisuuden kannalta.

Approaches to alpha-amino acids via rearrangement to electron-deficient nitrogen: Beckmann and Hofmann rearrangements of appropriate carboxyl-protected substrates

The titled approaches were effected with various 2-substituted benzoylacetic acid oximes 3 (Beckmann) and 2-substituted malonamic acids 9 (Hofmann), their carboxyl groups being masked as a 2,4,10-trioxaadamantane unit (an orthoacetate). The oxime mesylates have been rearranged with basic Al2O3 in refluxing CHCl3, and the malonamic acids with phenyliodoso acetate and KOH/MeOH. Both routes are characterized by excellent overall yields. Structure confirmation of final products was conducted with X-ray diffraction in selected cases. The final N-benzoyl and N-(methoxycarbonyl) products are alpha-amino acids with both carboxyl and amino protection; hence, they are of great interest in peptide synthesis.

B-H Bond Activation Using an Electrophilic Metal Complex: Insights into the Reaction Pathway

A highly electrophilic ruthenium center in the RuCl(dppe)(2)]OTf] complex brings about the activation of the B H bond in ammonia borane (H3N center dot BH3, AB) and dimethylamine borane (Me2HN center dot BH3, DMAB). At room temperature, the reaction between RuCl(dppe)(2)]OTf] and AB or DMAB results in trans-RuH(eta(2)-H-2)(dppe)(2)]OTf] trans-RuCl(eta(2)-H-2)(dppe)(2)]OTf], and trans-RuH(Cl)(dppe)(2)], as noted in the NMR spectra. Mixing the ruthenium complex and AB or DMAB at low temperature (198/193 K) followed by NMR spectral measurements as the reaction mixture was warmed up to room temperature allowed the observation of various species formed enroute to the final products that were obtained at room temperature. On the basis of the variable-temperature multinuclear NMR spectroscopic studies of these two reactions, the mechanistic insights for B-H bond activation were obtained. In both cases, the reaction proceeds via an eta(1)-B-H moiety bound to the metal center. The detailed mechanistic pathways of these two reactions as studied by NMR spectroscopy are described.

Synthesis, morphology, optical and photocatalytic performance of nanostructured beta-Ga2O3

Fine powders of beta-Ga2O3 nanostructures were prepared via low temperature reflux condensation method by varying the pH value without using any surfactant. The pH value of reaction mixture had great influence on the morphology of final products. High crystalline single phase beta-Ga2O3 nanostructures were obtained by thermal treatment at 900 degrees C which was confirmed by X-ray diffraction and Raman spectroscopy. The morphological analysis revealed rod like nanostructures at lower and higher pH values of 6 and 10, while spindle like structures were obtained at pH = 8. The phase purity and presence of vibrational bands were identified using Fourier transform infrared spectroscopy. The optical absorbance spectrum showed intense absorption features in the UV spectral region. A broad blue emission peak centered at 441 nm due to donor-acceptor gallium-oxygen vacancy pair recombination appeared. The photocatalytic activity toward Rhodamine B under visible light irradiation was higher for nanorods at pH 10.

Particle size, morphology and color tunable ZnO:Eu3+ nanophosphors via plant latex mediated green combustion synthesis

Efficient ZnO:Eu3+ (1-11 mol%) nanophosphors were prepared for the first time by green synthesis route using Euphorbia tirucalli plant latex. The final products were well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), etc. The average particle size of ZnO:Eu3+ (7 mol%) was found to be in the range 27-47 nm. With increase of plant latex, the particle size was reduced and porous structure was converted to spherical shaped particles. Photoluminescence (PL) spectra indicated that the peaks situated at similar to 590, 615, 648 and 702 nm were attributed to the D-5(0) -> F-7(j(j=1,2,3,4)) transitions of Eu3+ ions. The highest PL intensity was recorded for 7 mol% with Eu3+ ions and 26 ml plant latex concentration. The PL intensity increases with increase of plant latex concentration up to 30 ml and there after it decreases. The phosphor prepared by this method show spherical shaped particles, excellent chromaticity co-ordinates in the white light region which was highly useful for WLED's. Further, present method was reliable, environmentally friendly and alternative to economical routes. (c) 2013 Elsevier B.V. All rights reserved.

Bio-inspired route for the synthesis of spherical shaped MgO:Fe3+ nanoparticles: Structural, photoluminescence and photocatalytic investigation

MgO:Fe3+ (0.1-5 mol%) nanoparticles (NPs) were synthesized via eco-friendly, inexpensive and simple low temperature solution combustion route using Aloe vera gel as fuel. The final products were characterized by SEM, TEM and HRTEM. PXRD data and Rietveld analysis revealed the formation of cubic system. The influence of Fe3+ ion concentration on the structure morphology, UV absorption, PL emission and photocatalytic activity of MgO:Fe3+ NPs were investigated. The yellow emission with CIE chromaticity coordinates (0.44, 0.52) and average correlated color temperature value was found to be 3540 K which corresponds to warm light of NPs. The control of Fe3+. on MgO matrix influences the photocatalytic decolorization of methylene blue (MB) under UV light. The enhanced photocatalytic activity of MgO:Fe3+ (4 mol%) was attributed to dopant concentration, effective crystallite size, textural properties, decreased band gap and capability for reducing the electron hole pair recombination. Further, the trends of inhibitory effect in the presence of different radical scavengers were explored. These findings open up new avenues for the exploration of Fe-doped MgO in eco-friendly water applications and in the process of display devices. (C) 2015 Elsevier B.V. All rights reserved.

Surimi und daraus hergestellte Erzeugnisse - Technologische Aspekte

The techno1ogy of processing surimi and surimi-based products is described in detail from the German point of view. The most important definitions of both, intermediate and final products, are given. The quality aspects of surimi and final products derived from surimi are mentioned. Possibly further developments on the field of engineered seafoods are discussed shortly.

Evolução do refino de petróleo no Brasil

Este trabalho tem por objetivo apresentar a evolução da indústria do refino de petróleo no Brasil desde suas origens, sua evolução ao longo dos anos, explicitando as mudanças no perfil de produção, na matéria prima processada e na complexidade das nossas refinarias. Busca, também, apresentar os próximos passos para o refino de petróleo nacional, seus desafios face a produção de petróleos pesados e ácidos, bem como os impactos provocados pela necessidade de produção de derivados com especificações cada vez mais restritivas e com menor impacto ambiental. Optou-se pelo hidrorrefino como o primeiro grande passo para os próximos anos concluindo-se que unidades para o hidrotratamento de correntes intermediárias ou mesmo produto final assumirão um papel fundamental nos futuros esquemas de refino. Outra vertente importante analisada foi a necessidade de aumento de conversão, ressaltando-se que o caminho hoje escolhido de implantação de Unidades de Coqueamento Retardado se esgota no início da próxima década abrindo caminho para a tecnologia de hidroconversão de resíduo. Com relação à qualidade da gasolina e do óleo diesel foi apresentada uma proposta de esquema de refino para permitir o atendimento de especificações mais rígidas

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO2 emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production. Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO 2 emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions. Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement. © 2011 Elsevier B.V. All rights reserved.

Mapping the global flow of aluminum: from liquid aluminum to end-use goods.

Demand for aluminum in final products has increased 30-fold since 1950 to 45 million tonnes per year, with forecasts predicting this exceptional growth to continue so that demand will reach 2-3 times today's levels by 2050. Aluminum production uses 3.5% of global electricity and causes 1% of global CO2 emissions, while meeting a 50% cut in emissions by 2050 against growing demand would require at least a 75% reduction in CO2 emissions per tonne of aluminum produced--a challenging prospect. In this paper we trace the global flows of aluminum from liquid metal to final products, revealing for the first time a complete map of the aluminum system and providing a basis for future study of the emissions abatement potential of material efficiency. The resulting Sankey diagram also draws attention to two key issues. First, around half of all liquid aluminum (~39 Mt) produced each year never reaches a final product, and a detailed discussion of these high yield losses shows significant opportunities for improvement. Second, aluminum recycling, which avoids the high energy costs and emissions of electrolysis, requires signification "dilution" (~ 8 Mt) and "cascade" (~ 6 Mt) flows of higher aluminum grades to make up for the shortfall in scrap supply and to obtain the desired alloy mix, increasing the energy required for recycling.

Mechanical alloying of Fe-Mn and Fe-Mn-Si

The ball milling of Fe-24Mn and Fe-24Mn-6Si mixed powders has been performed by the high energy ball milling technique. By employing X-ray diffraction and Mossbauer measurements, the composition evolution during the milling process has been investigated. The results indicate the formation of paramagnetic Fe-Mn or Fe-Mn-Si alloys with a metastable fee phase as final products, which imply that the Fe and Mn proceed a co-diffusion mechanism through the surface of fragmented powders. The thermal stability and composition evolution of the as-milled alloys were discussed comparing with the bulk alloy. (C) 1999 Published by Elsevier Science S.A. All rights reserved.

Efficient One-Pot Synthesis of Highly Substituted Thiophene Library from 1,3-Dicarbonyl Compounds

A faccile and efficient one-pot synthesis of highly substituted thiophenes has been developed and employed for the preparation of a small focused library. Treatment of 1,3-dicarbonyl compounds 1 with CS2 in the presence of K2CO3 in DMF at room temperature, followed by stepwise addition of alkyl bromides 2 and methylene active bromides 3, provided via intramolecular cyclization 2,3,4,5-tetrasubstituted thiophenes 4 in yields of 77-94%. This protocol, combining construction and modification of the thiophene ring, increases the structural diversity of final products from readily available materials. A mechanism for the one-pot synthesis of thiophenes of type 4 has been proposed. A small focused library of thiophenes is prepared using the sequential addition of reagents to achieve unique substitution in the 2 and 5 position of the thiophene ring

Controllable synthesis of VSB-5 micirospheres and microrods: Growth mechanism and selective hydrogenation catalysis

Nanoporous VSB-5 nickel phosphate molecular sieves with relatively well controllable sizes and morphology of microspheres assembled from nanorods were synthesized at 140 degrees C over a short time in the presence of hexamethylenetetramine (HMT) by a facile hydrothermal method. The pH value, reaction time, and ratio of HMT to NaHPO2-H2O crucially influence the morphology and quality of the final products.