Designing a 161-element Ku-band microstrip reflectarray of variable size patches using an equivalent unit cell waveguide approach

An equivalent unit cell waveguide approach (WGA) to designing 4 multilayer microstrip reflectarray of variable size patches is presented. In this approach, a normal incidence of a plane wave on an infinite periodic array of radiating elements is considered to obtain reflection coefficient phase curves for the reflectarray's elements. It is shown that this problem is equivalent to the problem of reflection of the dominant TEM mode in a waveguide with patches interleaved by layers of dielectric. This waveguide problem is solved using a field matching technique and a method of moments (MoM). Based on this solution, a fast computer algorithm is developed to generate reflection coefficient phase curves for a multilayer microstrip patch reflectarray. The validity of the developed algorithm is tested against alternative approaches and Agilent High Frequency Structure Simulator (HFSS). Having confirmed the validity of the WGA approach, a small offset feed two-layer microstrip patch array is designed and developed. This reflectarray is tested experimentally and shows good performance.

User expectations for media sharing practices in open display networks

Open Display Networks have the potential to allow many content creators to publish their media to an open-ended set of screen displays. However, this raises the issue of how to match that content to the right displays. In this study, we aim to understand how the perceived utility of particular media sharing scenarios is affected by three independent variables, more specifically: (a) the locativeness of the content being shared; (b) how personal that content is and (c) the scope in which it is being shared. To assess these effects, we composed a set of 24 media sharing scenarios embedded with different treatments of our three independent variables. We then asked 100 participants to express their perception of the relevance of those scenarios. The results suggest a clear preference for scenarios where content is both local and directly related to the person that is publishing it. This is in stark contrast to the types of content that are commonly found in public displays, and confirms the opportunity that open displays networks may represent a new media for self-expression. This novel understanding may inform the design of new publication paradigms that will enable people to share media across the display networks.

Scouring uncharted waters – managing outbound open innovation in maritime industry

This thesis discusses the unexplored opportunities of open innovation, with a special focus on outbound open innovation. The extant literature indicates that the field of outbound open innovation still lacks of research, and especially the managerial issues lack of practicality. Also, the applicability to SME’s and traditional fields has been argued. The purpose of this study is to investigate how the outbound open innovation activities can be managed in maritime industry. By combining existing literature from the field of open innovation and innovation management, this study suggests first a theoretical management model, and contributes how it can be applied to industry- and company specifics; and then develops a practical model by constructing from the case company’s current management processes. As a result, the study synthesises a theoretical model of how the outbound open innovation activities can be managed. This model positions the outbound open innovation activities, the theoretical concepts found from the literature review, R&D processes, and the outbound open innovation implementation stages identified by previous research; and thus responses the need for practical steps for any company planning outbound open innovation activities. Practical tool for managers is also provided by identifying issues that are applied to industry- and company specifics. Then, open-ended case study questions are formulated accordingly and expert interviews selected by chain referral sampling, are conducted. Interviews provide information for the current management processes. By identifying the best practices and main challenges it is possible to outline and evaluate current outbound open innovation management processes and strategic choices in it. The researcher considers also the networks and their spheres of influences for the actors, activities and resources in the processes. Thus, the study provides a novel approach, and practical tools for the researchers and practioners in the field of open innovation. All in all, the study has come up that outbound open innovation is applicable to maritime industry; and the case company indeed has perfected its processes as cost-effective as possible, and so found its balance between the costs and benefits. However, several issues for future development are pointed out, and the study offers proposals for theory building. Findings are piloting in kind, but provide several theoretical and managerial implications, and reveal new research needs for the field.

Are there transformative indicators for motivation to learn?

Fourteen nursing s tudents enrolled in a community coll ege were chosen by purposeful se lection to be i nterviewed in a qualitative survey. A proposed mode l of Learner Motivation Development was examined . The mode l describes four stages of motivati on development progression across the lifespan: I Survival (infancy to childhood), I I Expl oration (childhood to adolescence), III Identification (pre- adulthood), and IV Reflection ( adulthood ). This r esearch examined the last two stages. The criteria used to categorize the students within the fr amework were bas ed on human development theories as described by Maslow (1954) and Erikson (1950). The concept of critica l thinking proposed by Brookfield (1987) and the ideas of transformative learning expressed by Mezirow (1991) were also incorporated. The researcher' s criteria , antici pated behaviours and characteri stics, were used to ana lyze the students' responses to open-ended questions. The central theme of the research was based on the assumption that motivation to learn is intrinsic and inherent in pre-adult and adult learners. Six pre-adults and two adults met the descriptors set for stage III Identification. Five adults and one pre-adult met the criteria for stage IV Reflection. The impact of life e xperiences and maturation were clearly demonstrated.

A fibre optic evanescent wave sensor for monitoring the rate of pulsed laser deposition of metal thin films

A novel sensing technique for the in situ monitoring of the rate of pulsed laser deposition (PLD) of metal thin films has been developed. This optical fibre based sensor works on the principle of the evanescent wave penetration of waveguide modes into the uncladded portion of a multimode fibre. The utility of this optical fibre sensor is demonstrated in the case of PLD of silver thin films obtained by a Q-switched Nd:YAG laser which is used to irradiate a silver target at the required conditions for the preparation of thin films. This paper describes the performance and characteristics of the sensor and shows how the device can be used as an effective tool for the monitoring of the deposition rate of silver thin films. The fibre optic sensor is very simple, inexpensive and highly sensitive compared with existing techniques for thin film deposition rate measurements

A fibre optic evanescent wave sensor for monitoring the rate of pulsed laser deposition of metal thin films

A novel sensing technique for the in situ monitoring of the rate of pulsed laser deposition (PLD) of metal thin films has been developed. This optical fibre based sensor works on the principle of the evanescent wave penetration of waveguide modes into the uncladded portion of a multimode fibre. The utility of this optical fibre sensor is demonstrated in the case of PLD of silver thin films obtained by a Q-switched Nd:YAG laser which is used to irradiate a silver target at the required conditions for the preparation of thin films. This paper describes the performance and characteristics of the sensor and shows how the device can be used as an effective tool for the monitoring of the deposition rate of silver thin films. The fibre optic sensor is very simple, inexpensive and highly sensitive compared with existing techniques for thin film deposition rate measurements.

“Design and Development of Coplanar Strip Fed Planar Antennas”

With the recent progress and rapid increase in the field of communication, the designs of antennas for small mobile terminals with enhanced radiation characteristics are acquiring great importance. Compactness, efficiency, high data rate capacity etc. are the major criteria for the new generation antennas. The challenging task of the microwave scientists and engineers is to design a compact printed radiating structure having broadband behavior along with good efficiency and enhanced gain. Printed antenna technology has received popularity among antenna scientists after the introduction of planar transmission lines in mid-seventies. When we view the antenna through a transmission line concept, the mechanism behind any electromagnetic radiator is quite simple and interesting. Any electromagnetic system with a discontinuity is radiating electromagnetic energy. The size, shape and orientation of the discontinuities control the radiation characteristics of the system such as radiation pattern, gain, polarization etc. It can be either resonant or non-resonant. This thesis deals with antennas that are developed from a class of transmission lines known as coplanar strip-CPS, a planar analogy of parallel pair transmission line. The specialty of CPS is its symmetric structure compared to other transmission lines, which makes the antenna structures developed from CPS quite simple for design and fabrication. The structural modifications on either metallic strip of CPS results in different antennas. The first part of the thesis discusses a single band and dual band design derived from open ended slot lines which are very much suitable for 2.4 and 5.2 GHz WLAN applications. The second section of the study is vectored into the development of enhanced gain dipoles. A single band dipole and a wide band enhanced gain dipole suitable for 5.2/5.8 GHZ band and imaging applications are developed and discussed. Last part of the thesis discusses the development of directional UWBs. Three different types of ultra-compact UWBs are developed and almost all the frequency domain and time domain analysis of the structures are discussed.

Compact CPW-Fed Slot Antenna with Harmonic Suppression

A compact coplanar waveguide (CPW)-fed uniplanar antenna with harmonic suppression characteristics is presented. The above characteristics are achieved by properly modifying the ground plane and adjusting the signal strip of an open-ended CPW-fed transmission line. The simulated and experimental characteristics of the antenna are presented, compared, and discussed.

Open or submerged healing of implants with platform switching: a randomized, controlled clinical trial

The temporal pattern of bone-level alterations in conventionally restored implants is dependent upon healing mode (open or submerged). This study examined the influence of healing on marginal bone levels at implants with a medium-rough surface including the implant collar and a clearance-fit implant-abutment connection restored according to a platform-switching concept.

Evaluation of the performance and cost-effectiveness of pavement sections containing open-graded base courses

Moisture induced distresses have been the prevalent distress type affecting the deterioration of both asphalt and concrete pavement sections. While various surface techniques have been employed over the years to minimize the ingress of moisture into the pavement structural sections, subsurface drainage components like open-graded base courses remain the best alternative in minimizing the time the pavement structural sections are exposed to saturated conditions. This research therefore focuses on assessing the performance and cost-effectiveness of pavement sections containing both treated and untreated open-graded aggregate base materials. Three common roadway aggregates comprising of two virgin aggregates and one recycled aggregate were investigated using four open-ended gradations and two binder types. Laboratory tests were conducted to determine the hydraulic, mechanical and durability characteristics of treated and untreated open-graded mixes made from these three aggregate types. Results of the experimental program show that for the same gradation and mix design types, limestone samples have the greatest drainage capacity, stability to traffic loads and resistance to degradation from environmental conditions like freeze-thaw. However, depending on the gradation and mix design used, all three aggregate types namely limestone, natural gravel and recycled concrete can meet the minimum coefficient of hydraulic conductivity required for good drainage in most pavements. Tests results for both asphalt and cement treated open-graded samples indicate that a percent air void content within the range of 15-25 will produce a treated open-graded base course with sufficient drainage capacity and also long term stability under both traffic and environmental loads. Using the new Mechanistic and Empirical Design Guide software, computer simulations of pavement performance were conducted on pavement sections containing these open-graded base aggregate base materials to determine how the MEPDG predicted pavement performance is sensitive to drainage. Using three truck traffic levels and four climatic regions, results of the computer simulations indicate that the predicted performance was not sensitive to the drainage characteristics of the open-graded base course. Based on the result of the MEPDG predicted pavement performance, the cost-effectiveness of the pavement sections with open-graded base was computed on the assumption that the increase service life experienced by these sections was attributed to the positive effects of subsurface drainage. The two cost analyses used gave two contrasting results with the one indicating that the inclusion of open-graded base courses can lead to substantial savings.

Patient education in glaucoma: what do patients know about glaucoma?

PURPOSE: To evaluate the knowledge glaucoma patients have about their disease and its treatment. METHODS: One hundred and eighty-three patients were interviewed at the Glaucoma Service of Wills Eye Hospital (Philadelphia, USA, Group 1) and 100 at the Glaucoma Service of University of Campinas (Campinas, Brazil, Group 2). An informal, relaxed atmosphere was created by the interviewer before asking a list of 18 open-ended questions. RESULTS: In Group 1, 44% of the 183 patients did not have an acceptable idea about what glaucoma is, 30% did not know the purpose of the medications they were taking, 47% were not aware of what was an average intraocular pressure, and 45% did not understand why visual fields were examined. In Group 2, 54% gave unsatisfactory answers to the question What is glaucoma?, 54% did not know the purpose of the medications they were taking, 80% were not aware of what was an average intraocular pressure, and 94% did not understand why visual fields were examined (p<0.001). Linear regression analysis demonstrated that level of education was positively correlated to knowledge about glaucoma in both groups (r=0.65, p=0.001). CONCLUSION: This study showed that patients' knowledge about glaucoma varies greatly, and that in an urban, American setting, around one third of the patients have minimal understanding, whereas in an urban setting in Brazil around two thirds of patients were lacking basic information about glaucoma. Innovative and effective methods are needed to correct this situation.

Os conhecimentos tradicional e científico do Saco do Arraial, estuário da Lagoa do Patos (RS)

Ethno-sciences study the logical behind the traditional population knowledge about environmental process. This case study aims at describing the ethno-knowledge of artisanal fishermen on the hydrodynamics of the estuary around Coreia community (Saco do Arraial), located in Dos Patos Lagoon, in southern Brazil, from an ethnooceangraphic perspective. For this purpose, mental maps, open-ended and in-depth semi-structured interviewing and participative research have been used. As well as scientific knowledge, rains and winds were had main hydrodynamic effort of Saco do Arraial, although astronomic influence in located hydrodynamic has been just a perception of traditional knowledge. Soon, these data have shown another important way to perceive the Patos Lagoon.

Análise proposicional quantitativa aplicada à pesquisa em administração

The analysis of interviews with open-ended questions is a common practice amongst researchers in the field of Management. The difficulty therein is to convert the linguistic data into categories or quantitative values for subsequent statistical treatment. Proposals made to this end generally entail counting lexical occurrences which, since they are founded on previously established meanings, fail to include semantic associations made by interviews. This article aims to present an analysis tool comprising a set of techniques apt to generate linguistic units that can be statistically described, compared, modeled and inferred: the Quantitative Propositional Analysis (QPA), Its main difference from other such methods lies in the choice of a proposition - and not the lexical unit - as analysis unit. We present the application of this method through a study about the international expansion of retail firms.

PbO-GeO(2) rib waveguides for photonic applications

This work presents for the first time to our knowledge the fabrication and characterization of rib waveguides produced with PbO-GeO(2) (PGO) thin films. The target was manufactured using pure oxides ( 60 PbO-40 GeO(2), in wt%) and amorphous thin films were produced with the RF sputtering technique. PGO thin films present small absorption in the visible and in the near infrared and refractive index of similar to 2.0. The definition of the rib waveguide structure was made using conventional optical lithography followed by plasma etching, performed in a Reactive Ion Etching (RIE) reactor. Light propagation mode in the waveguide structure was analyzed using integrated optic simulation software. Optical loss measurements were performed to determine the propagation loss at 633 nm, for ribs with height of 70 nm and width of 3-5 mu m; experimental values around 2 dB/cm were found for the propagation loss and confirmed the theoretical calculations. The results obtained demonstrate that PGO thin films are potential candidates for application in integrated optics. Published by Elsevier B.V.

Gutter detail, Collaborative Workshop, University of Queensland, St Lucia

Open-ended folded sheet metal gutter.