Goulburn : Talking fish - making connections with the rivers of the Murray-Darling Basin

The Goulburn River’s cold, clear waters rush westward down from the steep hills and mountains of the Great Dividing Range toward Seymour. The river then turns northward and meanders through hills and plains until the river meets the Murray upstream of Echuca. These are the traditional lands of the Taungurung, Bangerang and Yorta Yorta peoples. However, the Goulburn River today is not the river the Taungurung, Bangerang and Yorta Yorta once knew and fished...

Upper Murrumbidgee : Talking fish - making connections with the rivers of the Murray-Darling Basin

The Upper Murrumbidgee cuts its way through the Snowy Mountains in south‐eastern New South Wales, snaking its way south, then turning north before dropping into the lowland and heading west to join the Murray downstream of Swan Hill. The Upper ‘Bidgee floodplain is only a couple of hundred metres wide, a stark contrast to the kilometres‐wide floodplains in other parts of the Murray‐ Darling Basin. When the floods come, they come up quickly and roar through the narrow valleys. These are the traditional lands of the Ngunnawal and Ngarigo peoples. They fished the river and surrounding waterways and hunted the wetlands. The seasonal rise and fall of the water guided their travels and featured in their stories. The Ngunnawal and Ngarigo people have seen their land and the river change...

Murray : Talking fish - making connections with the rivers of the Murray-Darling Basin

The Murray River is the boundary between NSW and Victoria. The river both defines boundaries and unites them with the waters that sustain townships, irrigation and the floodplain forests, including the 70 000ha of the iconic Barmah and Millewa Forest. The river and its floodplain are the traditional lands of the Yorta Yorta and Bangerang people. The Murray is a very different river to the one the Yorta Yorta and Bangerang peoples once knew and fished...

Darling and the Great Anabranch : Talking fish - making connections with the rivers of the Murray-Darling Basin

The Lower Darling River and Great Darling Anabranch are located in south west New South Wales. Muddy waters meander over the grey soil floodplains past red dunes, spiky saltbush and gnarled red gums. These are the traditional lands of the Paakintji people. But the land and the river are no longer what the Paakintji once knew and fished...

Upper Darling: Brewarrina to Bourke : Talking fish - making connections with the rivers of the Murray-Darling Basin

To say ‘Back o’ Bourke’ means ‘miles from anywhere’ to most Australians, however the Barwon and Darling Rivers that pass by the townships of Brewarrina and Bourke, respectively, are at the heart of the Murray‐Darling Basin. These are the traditional lands of the Ngiyampaa, Murawari and Yuwalaraay peoples (refer Aboriginal language groups in the Bringing back the fish section at the back of this booklet). They fished the river and surrounding waterways and hunted the wetlands. The Ngiyampaa, Murawari and Yuwalaraay people have seen their land and the rivers change...

Ovens : Talking fish - making connections with the rivers of the Murray-Darling Basin

The Ovens River rises in the Victorian Alps where it is linked to significant freshwater meadows and marshes. It flows past Harrietville, Bright, Myrtleford and Wangaratta where it is joined by the King River on its way to meet the Murray near the top of Lake Mulwala. These the traditional lands of the Bangerang people and their neighbours the Taungurung and Yorta Yorta peoples. They have fished the river and surrounding waterways and hunted the wetlands. The ebb and flow of water guided their travels and featured in their stories. The Bangerang, Taungurung and Yorta Yorta have seen their land and the river change...

The Coorong and Lower Lakes : Talking fish - making connections with the rivers of the Murray-Darling Basin

After gathering water from 23 river valleys, the Murray empties into Lakes Alexandrina and Albert before making its way to the Coorong and out the Murray Mouth to Encounter Bay in South Australia. The entire Murray‐Darling Basin is upstream. Everything that happens there affects what goes on here...

Preparation and in vitro evaluation of a polymer based controlled release dry powder inhaler formulation for pulmonary delivery

This thesis described the synthesis of an L-leucine conjugate of the biodegradable polymer, chitosan and its potential application for the development of controlled release nanoparticulate dry powder inhaler (DPI) formulations. The study demonstrated that the physicochemical properties of conjugated chitosan nanoparticles had favourable effects on the dispersibility and controlled release profile of a model drug. The toxicity profile of the nanoparticulate formulation revealed promising outcome for its use in pulmonary delivery. The chitosan conjugate produced in this project would be useful for the application of polymer nanoparticulate systems for efficient lung delivery of drugs.

Colloidal drug probe : Method development and validation for adhesion force measurement using Atomic Force Microscopy

This study demonstrates a novel technique of preparing drug colloid probes to determine the adhesion force between a model drug salbutamol sulphate (SS) and the surfaces of polymer microparticles to be used as carriers for the dispersion of drug particles from dry powder inhaler (DPI) formulations. Model silica probes of approximately 4 lm size, similar to a drug particle used in DPI formulations, were coated with a saturated SS solution with the aid of capillary forces acting between the silica probe and the drug solution. The developed method of ensuring a smooth and uniform layer of SS on the silica probe was validated using X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Using the same technique, silica microspheres pre-attached on the AFM cantilever were coated with SS. The adhesion forces between the silica probe and drug coated silica (drug probe) and polymer surfaces (hydrophilic and hydrophobic) were determined. Our experimental results showed that the technique for preparing the drug probe was robust and can be used to determine the adhesion force between hydrophilic/ hydrophobic drug probe and carrier surfaces to gain a better understanding on drug carrier adhesion forces in DPI formulations.

Ultrasound-assisted surface engineering of pharmaceutical powders

Effective processing of powdered particles can facilitate powder handling and result in better drug product performance, which is of great importance in the pharmaceutical industry where the majority of active pharmaceutical ingredients (APIs) are delivered as solid dosage forms. The purpose of this work was to develop a new ultrasound-assisted method for particle surface modification and thin-coating of pharmaceutical powders. The ultrasound was used to produce an aqueous mist with or without a coating agent. By using the proposed technique, it was possible to decrease the interparticular interactions and improve rheological properties of poorly-flowing water-soluble powders by aqueous smoothing of the rough surfaces of irregular particles. In turn, hydrophilic polymer thin-coating of a hydrophobic substance diminished the triboelectrostatic charge transfer and improved the flowability of highly cohesive powder. To determine the coating efficiency of the technique, the bioactive molecule β-galactosidase was layered onto the surface of powdered lactose particles. Enzyme-treated materials were analysed by assaying the quantity of the reaction product generated during enzymatic cleavage of the milk sugar. A near-linear increase in the thickness of the drug layer was obtained during progressive treatment. Using the enzyme coating procedure, it was confirmed that the ultrasound-assisted technique is suitable for processing labile protein materials. In addition, this pre-treatment of milk sugar could be used to improve utilization of lactose-containing formulations for populations suffering from severe lactose intolerance. Furthermore, the applicability of the thin-coating technique for improving homogeneity of low-dose solid dosage forms was shown. The carrier particles coated with API gave rise to uniform distribution of the drug within the powder. The mixture remained homogeneous during further tabletting, whereas the reference physical powder mixture was subject to segregation. In conclusion, ultrasound-assisted surface engineering of pharmaceutical powders can be effective technology for improving formulation and performance of solid dosage forms such as dry powder inhalers (DPI) and direct compression products.

Induced Resistance: Potential for Control of Postharvest Diseases of Horticultural Crops

Fortunately, plants have developed highly effective mechanisms with which to defend themselves when attacked by potentially disease-causing microorganisms. If not, then they would succumb to the many pathogenic fungi, bacteria, viruses, nematodes and insect pests, and disease would prevail. These natural defence systems of plants can be deliberately activated to provide some protection against the major pathogens responsible for causing severe yield losses in agricultural and horticultural crops. This is the basis of what is known as ‘induced’ or ‘acquired’ disease resistance in plants. Although the phenomenon of induced resistance has been known amongst plant pathologists for over 100 years, its inclusion into pest and disease management programmes has been a relatively recent development, ie. within the last 5 years. This review will discuss very briefly some of the characteristics of the induced resistance phenomenon, outline some of the advantages and limitations to its implementation and provide some examples within a postharvest pathology context. Finally some approaches being investigated by the fruit pathology team at DPI Indooroopilly and collaborators will be outlined.

An exploratory study on the commercialisation of heat pump-fluidised bed drying technology

Fluidised bed-heat pump drying technology offers distinctive advantages over the existing drying technology employed in the Australian food industry. However, as is the case with many other examples of innovations that have had clear relative advantages, the rates of adoption and diffusion of this technology have been very slow. "Why does this happen?" is the theme of this research study that has been undertaken with an objective to analyse a range of issues related to the market acceptance of technological innovations. The research methodology included the development of an integrated conceptual model based on an extensive review of literature in the areas of innovation diffusion, technology transfer and industrial marketing. Three major determinants associated with the market acceptance of innovations were identified as the characteristics of the innovation, adopter information processing capability and the influence of the innovation supplier on the adoption process. This was followed by a study involving more than 30 small and medium enterprises identified as potential adopters of fluidised bed-heat pump drying technology in the Australian food industry. The findings revealed that judgment was the key evaluation strategy employed by potential adopters in the particular industry sector. Further, it was evidenced that the innovations were evaluated against a predetermined criteria covering a range of aspects with emphasis on a selected set of attributes of the innovation. Implication of these findings on the commercialisation of fluidised bed-heat pump drying technology was established, and a series of recommendations was made to the innovation supplier (DPI/FT) enabling it to develop an effective commercialisation strategy.

Applications of pedigree-based genome mapping in wheat and barley breeding programs.

The aim of the pedigree-based genome mapping project is to investigate and develop systems for implementing marker assisted selection to improve the efficiency of selection and increase the rate of genetic gain in breeding programs. Pedigree-based whole genome marker application provides a vehicle for incorporating marker technologies into applied breeding programs by bridging the gap between marker-trait association and marker implementation. We report on the development of protocols for implementation of pedigree-based whole genome marker analysis in breeding programs within the Australian northern winter cereals region. Examples of applications from the Queensland DPI&F wheat and barley breeding programs are provided, commenting on the use of microsatellites and other types of molecular markers for routine genomic analysis, the integration of genotypic, phenotypic and pedigree information for targeted wheat and barley lines, the genomic impacts of strong selection pressure in case study pedigrees, and directions for future pedigree-based marker development and analysis.

Developments in controlled green-water larval culture technologies for estuarine fishes in Queensland, Australia and elsewhere

Since 1989, researchers with the Department of Primary Industries and Fisheries (DPI&F) in Queensland, Australia, have successfully used controlled low-water exchange green-water cultures to rear the larvae of estuarine fishes and crustaceans through to metamorphosis. High survivals and excellent fry condition have been achieved for several commercially important endemic species produced for various projects. They include barramundi or sea bass, Lates calcarifer, Australian bass, Macquaria novemaculeata, dusky flathead, Platycephalus fuscus, sand whiting, Sillago ciliata, red sea bream or snapper, Pagrus auratus, banana prawn, Fenneropenaeus merguiensis, and others. The consistent success of our standardised and relatively simple approach at different localities has led to it being incorporated into general fingerling production practices at several establishments in Australia. Although post-metamorphosis rearing methods have differed for each species investigated, due to various biological and behavioural traits and project requirements, these larval rearing methods have been successful with few species-specific modifications. Initially modelled on the Taiwanese approach to rearing Penaeids in aerated low-water exchange cultures, the approach similarly appears to rely on a beneficial assemblage of micro-organisms. Conceptually, these micro-organisms may include a mixture of the air-borne primary invaders of pure phytoplankton cultures when exposed to outdoor conditions. Whilst this would vary with different sites, our experiences with these methods have consistently been favourable. Mass microalgal cultures with eco-physiological youth are used to regularly augment larval fish cultures so that rearing conditions simulate an exponential growth-phase microalgal bloom. Moderate to heavy aeration prevents settlement of particulate matter and encourages aerobic bacterial decomposition of wastes. The green-water larval rearing approach described herein has demonstrated high practical utility in research and commercial applications, and has greatly simplified marine finfish hatchery operations whilst generally lifting production capacities for metamorphosed fry in Australia. Its potential uses in areas of aquaculture other than larviculture are also discussed.

Strawberry breeding in a subtropical environment

Strawberry breeding aims to provide cultivars that maximise consumer satisfaction and producer profitability in a changing environment. In this paper some concepts of profitability, consumer satisfaction and sustainability are explored for a subtropical climate using Queensland Australia, and Florida USA, as examples. The typical production environment is annual autumn planting of bare rooted runners into polythene covered raised beds at about 40000 plants/ha. Harvesting is late autumn to early spring, with fruit arriving at the major markets up to 2000km away from the production area within 1-4 days of harvest. The basic premise in the breed-big work is that consumers must enjoy the experience of eating strawberries, and that perceived flavour, sweetness, and juiciness are the major contributors to this experience. Using market chain information, we developed a basic value model comprised of costs, returns, and sustainability of market. To this basic outline are applied operational descriptors, such as 'speed of harvest', and associated plant characteristics, such as 'fruit display'. The expression of each plant characteristic is ascribed a value or level and together numerically describe the phenotype. This description is mathematically manipulated to provide a 'value index' for the cultivar. Nine cultivars including 'Strawberry Festival', 'Kabarla', 'DPI Rubygem' and 'Sweet Charlie' are described, and environmental issues that may impact on the subtropical strawberry breeding objectives are discussed. Product differentiation and the use of exotic germplasm as a new source of genes for flavour and resistance to disease and environmental stress will likely be the cornerstones of future progress in subtropical strawberry breeding. This approach should satisfy both consumers and producers.