Determinação de clorobenzenos em água por cromatografia de fase gasosa com headspace

As preocupações com o meio ambiente em particular com a água, adquirem especial importância, porque as demandas estão se tornando cada vez maiores, sob o aspecto crescente da população e das atividades industriais. Quando se fala em água subterrânea, a primeira ideia que surge é que ela seja potável. Mas nem sempre isso é uma verdade. Em área urbana, os crescentes números de problemas devido a contaminação, na maioria das vezes por vazamentos de combustíveis oriundos dos tanques de armazenamento dos postos de gasolina. Sem falar nas indústrias que também oferecem potencial risco de contaminação para esses corpos hídricos e são pouco divulgadas. O presente trabalho tem como foco determinar os compostos clorobenzenos por cromatografia de fase gasosa com headspace (CG-HS) em matriz água e validar a metodologia. A metodologia usada neste estudo foi cromatografia de fase gasosa com headspace (CG HS), por ser uma técnica excelente e sensível e é utilizada para determinar compostos voláteis em baixas concentrações. Os dados obtidos foram tratados estatisticamente de modo avaliar a seletividade, os limites de detecção e quantificação, a faixa linear de trabalho, a linearidade e a recuperação. As recuperações variam de 80 a 110%, os coeficientes de variação obtidos foram menor que 20%, todas as substâncias estudadas apresentaram linearidade na faixa de trabalho de 0,8 a 100g.L-1. Foram estudadas 10 amostras de água subterrânea do Município do Rio de Janeiro e nas amostras analisadas foram encontrados todos os compostos em estudo, com faixa de concentração: monoclorobenzeno (<0,8 a 2,988g.L-1); 1,3-diclorobenzeno (<0,8 a 23,067g.L-1); 1,4-diclorobenzeno (nd a 16,160g.L-1); 1,2-diclorobenzeno (<0,8 a 48,685g.L-1); 1,3,5-triclorobenzeno (<0,8 a 21,900g.L-1); 1,2,4-triclorobenzeno (1,007 a 183,808g.L-1) e 1,2,3-triclorobenzeno (<0,8 a 126,886g.L-1)

Estudo da formação de sub-produtos da degradação de clorobenzeno e 1,2-dicloroetano a partir da reação com reagente de Fenton em solução aquosa utilizando diferentes fontes de ferro

Poluições da água e do solo são duas das cinco categorias básicas de poluição ambiental. As outras três são do ar, ruído e luz. Poluição ocorre quando um material/produto químico é adicionado ao meio ambiente afetando-o adversamente. Uma vez que a poluição existe, retornar a matriz impactada para o seu estado anteriormente não poluído torna-se muito difícil ou até mesmo impossível em alguns casos. Os compostos organoclorados (OC) representam um importante grupo de poluentes orgânicos persistentes (POP), devido à sua toxicidade e elevada persistência no ambiente. Diferentes técnicas de remediação de solo e água subterrânea têm sido desenvolvidas com o objetivo de reparar as áreas contaminadas em menor tempo e custo possíveis e, assim, a oxidação química in situ tem se mostrado uma técnica cada vez mais atraente devido sua simplicidade e baixo custo. A degradação de dois compostos organoclorados via oxidação química por reagente de Fenton em solução aquosa é o objeto do presente trabalho. Para tanto, foram selecionados dois compostos, sendo um alifático e outro aromático. Assim, foram avaliadas as condições de degradação dos compostos organoclorados em relação às concentrações do oxidante em diferentes tempos reacionais, diferentes fontes de catalisador e, de forma qualitativa, quais foram os principais subprodutos formados. Os ensaios oxidativos foram realizados em meio aquoso com temperatura controlada a 25 C e em 3 configurações de [Fe2+] e [H2O2]. A extração dos compostos de interesse para a fase orgânica também foi estudada. A análise dos extratos revelou que o acetato de etila foi o solvente que melhor extraiu os compostos de interesse da fase aquosa. Além destes ensaios, foram avaliadas outras duas fontes de Fe(II), sendo 11 óxidos de manganês dopados com ferro e a classe de solo predominante no território nacional, que é caracterizada pela sua alta concentração de ferro endógeno (latossolo). O ensaio entre as fontes de ferro revelou que tanto o óxido de Mn quanto o latossolo produziram menos subprodutos em relação à reação com a solução de sulfato Fe(II). Entretanto, em termos quantitativos, a redução na concentração de clorobenzeno foi mais efetiva na reação com a solução de Fe(II) (cerca de 63%). A identificação dos sobprodutos foi realizada a partir da análise em cromatógrafo a gás acoplado a espectrômetro de massas e em análise comparativa dos espectros com a biblioteca NIST. Os ensaios oxidativos revelaram que em baixas concentrações de oxidante, há a possibilidade de geração de subprodutos mais tóxicos que os reagentes, sendo produzido bifenilas policloradas e hexaclorociclohexano nas reações com clorobenzeno e 1,2-dicloroetano, respectivamente

A solid-phase microextraction fiber coated with diglycidyloxycalix[4]arene yields very high extraction selectivity and sensitivity during the analysis of chlorobenzenes in soil

A novel fiber coated with novel sol-gel (5,11,17,23-tetra-tert-butyl-25,27-dihydroxy-26,28-diglycidyloxycalix[4]arene/hydroxy-terminated silicone oil; diglycidyloxy-C[4]/OH-TSO) was prepared for use with headspace solid-phase microextraction (HS-SPME) combined with gas chromatography (GC) and electron capture detection (ECD), which was applied in order to determine nine chlorobenzenes in soil matrices. Due to the improved fiber preparation, which increases the percentage of calixarene in the coating, the new calixarene fiber exhibits very high extraction selectivity and sensitivity to chlorine-substituted compounds. Various parameters affecting the extraction efficiency were optimized in order to maximize the sensitivity during the chlorobenzene analysis. Interferences from different soil matrices with different characteristics were investigated, and the amount extracted was strongly influenced by the matrix. Therefore, a standard addition protocol was performed on the real soil samples. The linear ranges of detection for the chlorobenzenes tested covered three orders of magnitude, and correlation coefficients > 0.9976 and relative standard deviations (RSD) < 8% were observed. The detection limits were found at sub-ng/g of soil levels, which were about an order of magnitude lower than those given by the commercial poly(dimethylsiloxane) (PDMS) coating for most of the compounds. The recoveries ranged from 64 to 109.6% for each analyte in the real kaleyard soil matrix when different concentration levels were determined over the linear range, which confirmed the reliability and feasibility of the HS-SPME/GC-ECD approach using the fiber coated with diglycidyloxy-C[4]/OH-TSO for the ultratrace analysis of chlorobenzenes in complex matrices.

Quantitative structure-property relationships for octanol-air partition coefficients of polychlorinated naphthalenes, chlorobenzenes and p,p '-DDT

The octanol-air partition coefficient (K-OA) is a key descriptor of chemicals partitioning between the atmosphere and environmental organic phases. Quantitative structure-property relationships (QSPR) are necessary to model and predict KOA from molecular structures. Based on 12 quantum chemical descriptors computed by the PM3 Hamiltonian, using partial least squares (PLS) analysis, a QSPR model for logarithms of K-OA to base 10 (log K-OA) for polychlorinated naphthalenes (PCNs), chlorobenzenes and p,p'-DDT was obtained. The cross-validated Q(cum)(2) value of the model is 0.973, indicating a good predictive ability of the model. The main factors governing log K-OA of the PCNs, chlorobenzenes, and p,p'-DDT are, in order of decreasing importance, molecular size and molecular ability of donating/accepting electrons to participate in intermolecular interactions. The intermolecular dispersive interactions play a leading role in governing log K-OA. The more chlorines in PCN and chlorobenzene molecules, the greater the log K-OA values. Increasing E-LUMO (the energy of the lowest unoccupied molecular orbital) of the molecules leads to decreasing log K-OA values, implying possible intermolecular interactions between the molecules under study and octanol molecules. (C) 2002 Elsevier Science Ltd. All rights reserved.

功能菌剂的混合发酵研究

随着化工行业的发展，大量有毒有害难降解有机物随工业废水的排放进入环境，这些物质能够在环境中长期存在、积累和扩散，通过食物链对动植物的生存及人类的健康造成不良影响。本文以苯酚、对氯硝基苯、氯苯和十六烷为模拟污染物，以前期研制的功能菌剂为对象，经过紫外线线诱变筛选出优于出发菌株的功能菌，对诱变后功能菌的理化性能进行了研究，对菌种进行了鉴定，在此基础上，就其相互之间的微生态关系进行研究，为混合发酵提供理论基础，并就其最佳发酵条件及发酵参数进行了研究，最后对发酵产品的性能进行了检测。目前，国内外有关功能菌剂的研究还存在多方面的不足，主要包括：①由于多菌种混合发酵过程较为复杂，各菌之间存在复杂的相互作用，影响因素较多，关于菌种之间的相互关系研究得很少，环境功能菌剂的发酵方法大多采用单独发酵后混合的方式。单独发酵对原材料、设备和能源的利用率较低，对于多菌种制剂发酵，在设备、能源和原材料的方面造成的浪费更大，将会大幅增加菌剂的生产成本，影响多菌种功能菌剂的发展；②功能菌剂生产过程的质量控制方面研究得较少；③功能菌剂产品的稳定性、抗冲击性能研究得较少，对环境微生物制剂的研究主要集中在菌种选育和培养条件优化方面。 通过本论文研究，得到以下主要结论。 （1）在紫外线诱变处理中，用紫外线对发生一定程度退化的出发菌株进行诱变处理后，六株具有高效降解性能的菌株被筛选出来，诱变筛选出的菌株形态和ERIC-PCR指纹图谱与出发菌株相比发生了明显改变；而且诱变后的菌株对目标难降解底物的降解能力均得到改善，其中，FPN、FCB、F14、FEm对目标底物的降解率提高了20%以上；诱变后菌株经过7次连续传代接种后，对目标难降解底物的降解率无显著变化，具有一定的遗传稳定性。并对诱变后的功能菌进行了初步的鉴定，这6株菌都分别是芽孢杆菌。 （2）对诱变后的功能菌相互之间的微生态关系进行了研究，通过抑菌实验、生长量以及基质消耗量的比较，确定它们之间的生长关系是无害共栖关系，可以进行混合发酵。 （3）对该功能菌剂进行发酵培养条件研究，结果表明发酵培养基的最佳成分（g/L）：葡萄糖 31.0g/L、玉米粉10.0g/L、磷酸氢二钾1.0g/L、硫酸铵1.1g/L、硫酸镁0.55g/L。通过研究不同的培养条件对菌体生长和降解性能的影响，确定了最佳培养条件：培养基初始pH7.5；最适温度32℃；培养基装液量125mL（250 mL三角瓶），以及培养时间对降解性能的影响，培养20 h的产物对降解最为有利。通过研究添加不同目标污染物对菌体生长和降解性能的影响，确定了添加目标污染物的最佳量以及最佳时间：苯酚投加量：1.125 g/L，对氯硝基苯投加量：0.1 g/L；最佳投加时间为发酵培养开始后4 h。 （4）以摇瓶分批发酵最优条件为基础，对FPN、F10、FCB、FNa、F14 和 FEm进行了摇瓶分批发酵试验。以摇瓶分批发酵试验数据为依据，对功能菌剂分批发酵动力学进行了研究，建立了菌体生长和基质消耗的动力学模型，拟合模型能较好的反映功能菌剂分批发酵过程。 （5）功能菌剂和活性污泥协同作用，可以提高系统的生物降解能力，功能菌剂投加量为2%，新鲜活性污泥3500 mg/L，降解24 h条件下，功能菌剂和活性污泥的协同作用对COD的去除率和对照组相比，最多的提高了36.8%。功能菌剂和活性污泥协同作用以及活性污泥的单独作用，其生物降解过程均符合一级反应动力学过程，功能菌剂和活性污泥协同作用的生物降解动力学方程为：，相关系数97%。采用SBR运行方式，引入功能菌剂的SBR系统明显能够改善和提高生物降解的效率。与仅有活性污泥的系统相比，系统对COD的平均去除率可以提高27.1%，同时，系统的耐负荷冲击以及耐毒害冲击的性能比仅有活性污泥的SBR系统强，特别是负荷冲击对引入功能菌剂的SBR系统影响很小。仅有活性污泥的SBR系统经过负荷冲击和毒害冲击之后，不能恢复到冲击之前的水平，而且系统有效作用时间的周期比引入功能菌剂的SBR系统相比大大缩短，而引入功能菌剂的SBR系统处理效果较为稳定，恢复能力很强。 Along with the development of industries, many recalcitrant organic chemicals have been discharged into natural environments together with wastewaters and can exist in waters, soil and sediments for a long time without degradation. These haz-ardous substances, their byporducts and metabolizabilities can be highly toxic, mu-tagenic and carcinogenic, thereby threatening animals, plants and human health through food chain. Consequently the removal of these compounds is of significant interest in the area of wastewater treatment. In this dissertation, the phenol, hydro-quinone, chlorobenzene and hexadecane treated as the model pollutants, the func-tional microorganism agent was used as the starting strains, they treated with ultra-violet light, and then the mutant strains with high degradation ability were screened out and identified primarily, the relationship between these stains were studied, the medium composition and fermentation conditions were optimized, the degradation ability of the fermented production was tested. The literature survey indicates that the study of the microorganism agent is far from complete and more information is re-quired on following problems. 1, Because of the complexity of relationship in mixed fermentation and the complicated factors, the study is hardly to process.2, There is a lack of information on the quality control of the producing process .3, And there is a lack of information on the stability about the microorganism agent. In this dissertation, the main results of the present study could be summarized as follows: (1)The degenerate starting strains were treated with the ultraviolet light, and six mutant strains with high biodegradation ability were screened out by using the me-dium with selective pressure of model pollutants. The mutant strains had great changes in colonialmorphology and ERIC-PCR fingerprinting. And the mutant strains got obvious advantages over the starting strains in degradation ability and over 20% improvement of removal rates was achieved for FPN、FCB、F14 and FEm. The de-gradation ability of the mutant strains was stable after seven generations. After that, the mutant strains were primarily identified as bacillus respectively. (2) The relationship between these mutant strains was studied. By the compari-son of antibiosis effect, biomass and consumption of substrate, the relationships were neutralism and they could be mixed fermented. (3) The optimized cultivation conditions were as follows: glucose 31.0 g/L, corn power 10 g/L, K2HPO4 1.0 g/L, (NH4)2SO4 1.1 g/L, MgSO4 0.55 g/L, initial pH7.5, temperature 32℃, working volume 125 mL/250 mL, and cultivation time 20h (con-sidering the time effect on degradation ability), adding pollutants phenol (1.125 g/L) and hydroquinone (0.1 g/L) into the broth at 4 h after cultivation. (4) Based on the above optimum condition, the batch fermentation was per-formed with strains FPN, F10, FCB, FNa, F14 and FEm in shake flask. The batch fermentation kinetics was studied based on the experimental data. Two kinetic models were constructed which could reflect the regularity of growth and substrate consump-tion in the process of batch fermentation. (5) The co-operation of functional microorganism agent and activated sludge could raise biodegradation of system by adding some microorganism agent and 3500 mg/L fresh activated sludge. Bioaugumentation by the addition of high effective deg-radation culture enhanced the treatment effect of SBR system and the COD removal rate was increased by 20%-36.8%. Its biodegradation matched first-order dynamical reaction equation, and the reaction equation was ln0.2327.391ct=−+. The micro-organism agent had the effect of optimization to activated sludge micro-ecosystem. The SBR system adding 2% microorganism agent, the average COD removal rate of that was increased by 27.1% and stronger anti-shock ability to load and toxicant were achieved (compared with SBR system just adding activated sludge). Especially the load-shock has barely effect to the SBR system adding microorganism agent. After the load and toxicant shock, the SBR system just adding activated sludge couldn’t come back to original level and the activated sludge micro-ecosystem was frustrated. The applying of microorganism agent increased biological activity and system’s re-sistance ability to load shock and toxicant shock.

Liquid-phase hydrodechlorination of chlorinated benzenes over active carbon supported nickel catalysts under mild conditions

Liquid phase hydrodechlorination of chlorinated benzenes was studied over Ni/active carbon (Ni/AC), Ni/gamma-Al2O3, Ni/SiO2 and Raney Ni. The complete dechlorination of chlorobenzene (ClBz) was realized at 333-343 K on Ni/AC under hydrogen atmosphere of 1.0 MPa in the presence of alkaline hydroxide. Dichloro- and trichlorobenzenes were also hydrodechlorinated with 50-95% yields of benzene under the similar conditions, as above. The reaction follows zero-order to ClBz concentration and 1.9 order to hydrogen pressure. The reaction does not proceed in the absence of alkaline hydroxide, suggesting the complete coverage of active nickel surface with produced chlorine and the removal of the chlorine ion with hydroxide ion as a rate-limiting step. The active catalysts were characterized by H-2 chemisorption and transmission electron microscopy techniques. The apparent activity strongly depends on the active area of nickel on catalyst surface. (C) 2004 Published by Elsevier B.V.

Pretreatment of polymer-supported Pd-Co and its catalytic activity

Various pretreatments of poly (N-vinyl-2-pyrrolidone) (PVP) protected palladium-cobalt system result in different catalytic activities in the hydrodechlorination of chlorobenzene.

水、土壤及植物样品中1,2,4-三氯苯的提取和GC测定

<正> 1 引言三氯苯(1,2,4-TCB)是化学工业和合成农药的重要原料,但同时也是环境中广泛存在的污染物。早在1979年,1,2,4-TCB就被美国环保局列入129种优先控制的污染物之一。在我国1,2,4-TCB也是常见的一种有机污染物。水体和土壤中1,2,4-TCB的分析方法国内已见报道。但这些方法大多步骤复杂、操作困难,而且费时、试剂消耗量大。另外,目前尚没有植物样品中1,2,4-TCB分析方法的报道。本文建立了步骤简单、易操作、节约试剂的水、土壤、植物和作物籽实中1,2,4-TCB的提取和分析方法。

Solution-Processible Red Iridium Dendrimers based on Oligocarbazole Host Dendrons: Synthesis, Properties, and their Applications in Organic Light-Emitting Diodes

A series of novel red-emitting iridium dendrimers functionalized with oligocarbazole host dendrons up to the third generation (red-G3) have been synthesized by a convergent method, and their photophysical, electrochemical, and electroluminescent properties have been investigated. In addition to controlling the intermolecular interactions, oligocarbazole-based dendrons could also participate in the electrochemical and charge-transporting process. As a result, highly efficient electrophosphorescent devices can be fabricated by spin-coating from chlorobenzene solution in different device configurations.

Studies on the product of ion-molecule reaction of halogeno-benzene in gas phase by MS/MS

The fragmentations of the product ions produced by the ion-molecule reaction of the halogeno-benzene (chlorobenzene, bromobenzene and iodobenzene) were studied using the collision-induced dissociation, The main product ions of the ion-molecule reaction of three kinds of halogeno-beneze include the dimeric ions, m/z(2M-X) ions and m/z(2M-2X) ions, The CID spectra of these ions were compared with that of the protonated bromodiphenyl and biphenyl, The formation mechanism and the structure of the product ions were obtained.

Amperometric biosensor for tyrosinase inhibitors in a pure organic phase

The determination of benzoic acid, thiourea and 2-mercaptoethanol in three pure organic solvents, viz., chloroform, chlorobenzene and 1,2-dichlorobenzene, by using an amperometric cryohydrogel tyrosinase biosensor is described. Measurements were carried out with phenol as the enzyme substrate. Kinetic parameters (K-i and I-50) were determined in the three solvents for various inhibitors. The sensor showed the most sensitive measurements to these inhibitors in pure chloroform. The solvent-induced deviation of the biosensor to thiourea was evaluated by means of Hill coefficients. The smallest deviation as observed in 1,2-dichlorobenzene, owing to the high hydrophobicity of this solvent. The nature of the inhibition process and its reversibility mere also examined.

Study on the UCST and LCST in PHB/PBHE-solvent system

Upper and lower critical solution temperature (UCST and LCST) behaviours have been examined for solution of PHB/PBHE blends in chloroform and chlorobenzene. Polymer-Solvent systems prepared with various solvents and concentrations were found to possess UCST and LCST characteristics. PHB/PBHE solution in chloroform displayed greater miscibility temperature region than that of the blend in chlorobenzene, but the relative tendency of both UCST and LCST were similar.

CONSTRUCTION OF A TYROSINASE-BASED BIOSENSOR IN PURE ORGANIC-PHASE

A novel immobilization method for construction of a tyrosinase-based biosensor applied in pure organic phase is described. This method gives the enzyme a hydrated shell which allows the enzyme to maintain its biocatalytic activity in a pure organic solvent The enzyme electrode was used to determine several phenols and o-diphenols in pure chloroform and chlorobenzene. The biosensor can be stored in dry state for more than 3 months without any loss of the activity. The kinetic parameters have also been calculated and are presented herein.

Lanthanide(III) nitrobenzenesulfonates as new nitration catalysts: The role of the metal and of the counterion in the catalytic efficiency

Lanthanide(III) complexes of p-nitrobenzenesulfonic acid, Ln(p-NBSA)(3), m-nitrobenzenesulfonic acid, Ln(m-NBSA)(3), and 2,4-nitrobenzenesulfonic acid, Ln(2,4-NBSA)(3), were prepared, characterized and examined as catalyst for the nitration of benzene, toluene, xylenes, naphthalene, bromobenzene and chlorobenzene. The initial screening of the catalysts showed that lanthanum(III) complexes were more effective than the corresponding ytterbium(III) complexes, and that catalysts containing the bulky 2,4-NBSA ligand were less effective than the catalyst containing p-NBSA (nosylate) or m-NBSA ligands. Examination of a series of Ln(p-NBSA)(3) and Ln(m-NBSA)(3) catalysts revealed that there is a clear correlation between the ionic radii of the lanthanide(III) ions and the yields of nitration, with the lighter lanthanides being more effective. The X-ray single crystal structure of Yb(m-NBSA)(3).6H(2)O shows that two m-NBSA ligands are directly bound to the metal centre while the third ligand is not located in the first coordination sphere, but it is hydrogen bonded to one of the water molecules which is coordinated to ytterbium(III). NMR studies suggest that this structure is preserved under the conditions used in the nitration reaction. The structure of Yb(m-NBSA)(3) is markedly different from the structure of the well-known ytterbium(III) triflate catalyst. The coordination of the nitrobenzenesulfonate counterion to the lanthanide(III) ion suggests that steric effects might play an important role in determining the efficiency of these novel nitration catalysts. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2004).

Chlorobenzenes in rivers draining industrial catchments

Eleven chlorobenzenes (out of a total of 12 in the congener series) were monitored weekly on four industrialized rivers (Aire, Calder, Don and Trent) of the Southern Humber Catchment in whole water samples. 1,2- and 1,4-dichlorobenzene were present at relatively high levels on both the Aire and Calder, having mean concentrations of approximately 30 ng/l. They were both at lower concentrations on the Don and Trent, although the 1,4-isomer dominated. All other chlorobenzenes monitored were routinely found on all the rivers, with the exception of hexachlorobenzene, which was only regularly detected on the Trent. Again, the rivers fell into two classes with respect to their total chlorobenzene concentrations, with the Aire and Calder being more polluted. The higher levels of chlorobenzenes (excluding hexachlorobenzene which was used widely as a agricultural pesticide) on the Aire and Calder, and the dominance of the 1,4-dichlorobenzene congener (accounting for 60-70% of sigma chlorobenzenes) on the Don and Trent, indicated that the Aire and Calder were predominately contaminated with chlorobenzenes through industrial sources, while the Don and Trent were mainly contaminated through domestic sources (1,4-dichlorobenzene is widely used as a toilet deodorant). 1,4-Dichlorobenzene dominated flux, with the Aire, Don and Trent exporting 52.5 kg/year into the Humber estuary, followed by the 1,2-dichlorobenzene at 38.8 kg/year. Sigma chlorobenzenes exported to the Humber was 133 kg/year. This is the first study to calculate chlorobenzene fluxes to the North Sea from a UK catchment.