The institutional choices of politicians : how and why legislators shape Lower Chambers

Cette thèse s’intéresse aux choix institutionnels des législateurs. Elle propose une analyse diachronique et comparative du développement des Chambre Nationale des Députés argentines et chiliennes des années 1940 aux années 2000. Inspiré de la théorie du Cartel (Cox et McCubbins, 1993), ce travail se concentre sur le rôle des partis politiques dans ce développement institutionnel. Il montre qu’en dépit de leurs différences, les partis uniques, coalitions, forces majoritaires ou minoritaires qui ont dirigé ces chambres ont adopté un large éventail de règles et de normes organisationnelles qui les avantagent. Ils se sont, en un mot, comportés comme des coalitions procédurales. L’analyse des modifications des règles de fonctionnement de ces chambres et de leurs systèmes de direction et de commissions montre que les partis et coalitions au pouvoir ont, pendant cette période, renforcé leur pouvoir, contrôlé l’agenda législatif, structuré les systèmes de commission et adopté des règles qui leur ont profité. Les résultats obtenus suggèrent en particulier que les coalitions qui ont dirigé la chambre Chilienne ont installé certains de leurs membres à plusieurs postes comme les présidences d’assemblée et de commissions. Ils montrent l’existence d’un pouvoir de véto sur l’agenda législative plus importante au Chili qu’en Argentine. L’étude du cas argentin montre que les partis au pouvoir ont, en particulier depuis les années 1960, conservé le contrôle de la chambre, non seulement en modifiant les règles et les structures du système de commissions, mais également en créant et distribuant à l’opposition des postes permanents mais sans réel pouvoir. Cette analyse confirme également les résultats obtenus par de récentes études concernant ce champ de recherche, notamment le professionnalisme du système de commission chilien et le caractère amateur des législateurs argentins. A l’inverse, elle met à jour des différences, négligées jusqu’alors, entre l’Argentine et le Chili concernant le contrôle de l’agenda législatif. Cette thèse est divisée en sept chapitres. Le premier introduit le sujet, l’hypothèse générale et les questions posées par la thèse, en expliquant également pourquoi les choix institutionnels des législateurs importent. Le chapitre II présente la théorie et la méthodologie. Il propose une définition du développement institutionnel et explicite les prédictions et critères permettant de tester l’hypothèse générale. Les chapitre III et IV, qui concernent respectivement l’Argentine et le Chili, décrivent le système politique de chaque pays et l’organisation des chambres durant la période étudiée. Les chapitre IV et VI, respectivement pour l’Argentine et le Chili, analysent les réformes des règles régissant les chambres, l’évolution de l’autorité qui les dirige et celle du système de commission. Ces chapitres se concluent par un résumé des différents schémas mis en évidence et une évaluation préliminaire de l’hypothèse générale. En conclusion, le chapitre VII résume les découvertes, donne un verdict global sur la fécondité de la théorie et suggère de nouvelles pistes de recherche.

Chambers adult learners' guide to spelling : practical methods for learning how to spell.

Guía de ortografía dirigida a adultos. Su objetivo es crearles confianza mediante el desarrollo de rutinas y estrategias para hacer frente a las palabras comúnmente mal escritas. No se trata de reglas de ortografía, sino de dividir las palabras y aprender a recordarlas de una manera diferente. Contiene una sección de código de color en un programa de cuatro semanas para mejorar las habilidades de escritura, ejemplos, actividades e ilustraciones para reforzar los conocimientos aprendidos. El autor es un especialista en dislexia.

Chambers adult learners' writing guide : word-perfect forms, job applications and e-mails.

Guía práctica dirigida a los adultos para que desarrollen, con un método sencillo y práctico, las habilidades básicas con la escritura, necesarias además, para su vida cotidiana, desde escribir una sencilla nota, a rellenar un formulario o solicitar un trabajo.

Measuring root traits in barley (Hordeum vulgare ssp vulgare and ssp spontaneum) seedlings using gel chambers, soil sacs and X-ray microtomography

Root characteristics of seedlings of five different barley genotypes were analysed in 2D using gel chambers, and in 3D using soil sacs that were destructively harvested and pots of soil that were assessed non-invasively using X-ray microtomography. After 5 days, Chime produced the greatest number of root axes (similar to 6) and Mehola significantly less (similar to 4) in all growing methods. Total root length was longest in GSH01915 and shortest in Mehola for all methods, but both total length and average root diameter were significantly larger for plants grown in gel chambers than those grown in soil. The ranking of particular growth traits (root number, root angular spread) of plants grown in gel plates, soil sacs and X-ray pots was similar, but plants grown in the gel chambers had a different order of ranking for root length to the soil-grown plants. Analysis of angles in soil-grown plants showed that Tadmore had the most even spread of individual roots and Chime had a propensity for non-uniform distribution and root clumping. The roots of Mehola were less well spread than the barley cultivars supporting the suggestion that wild and landrace barleys tend to have a narrower angular spread than modern cultivars. The three dimensional analysis of root systems carried out in this study provides insights into the limitations of screening methods for root traits and useful data for modelling root architecture.

Campanian crustacean burrow system from Israel with brood and nursery chambers representing communal organization

Phosphorite-filled crustacean burrows associated with a Campanian-age omission surface in the north-western Negev are described. The phosphatic burrow casts weather out displaying scratches (bioglyphs) and two types of local swellings (chambers), which are flattened normal to the course of the burrow. The more abundant chamber type is a flattened spheroid (diameter 45-50 mm) or a flattened, highly prolate ellipsoid of larger dimensions, with bioglyphs. The other type is a flattened spheroid (diameter 45 mm), gently rounded on the upper side and flat on the base. Rings of elevations on the cast (representing moats) form interconnected circlets, each capped by about eight rounded hemispherical tubercles (4 x 4 mm) (pits on original), the whole forming a discrete network. The first type of chamber may have hosted the young (nursery chamber) and/or stored food. The second type of cast replicates a chamber with a pitted floor, which may have formed a brood chamber for 60-70 spherical eggs, each about 3 mm in diameter. Brood chambers in crustacean burrow systems were previously suspected, but only at burrow terminations. The interpreted K-type breeding strategy, brood care and associated functions require a high degree of social organization, none of which has been observed in extant crustaceans, but all occur within social insects.

William Clark Russell and Chambers's Journal: elopement and the Victorian nautical novel

This essay examines aspects of the serialisation of the novels of William Clark Russell, the greatest late Victorian nautical novelist. Focusing on the treatment of his work by the Edinburgh firm of Messrs Chambers, the article provides an illuminating perspective on market censorship in this period. Drawing on the archives of Chatto & Windus and the literary agent A.P. Watt, it traces the network of relations between author, agent, magazine editor and book publisher, showing how the various components of the serial market operated in the late 1880s and early 1890s.

Methane emissions from cattle: estimates from short-term measurements using a Green Feed system compared with measurements obtained using respiration chambers or sulphur hexafluoride tracer

The Green Feed (GF) system (C-Lock Inc., Rapid City, USA) is used to estimate total daily methane emissions of individual cattle using short-term measurements obtained over several days. Our objective was to compare measurements of methane emission by growing cattle obtained using the GF system with measurements using respiration chambers (RC)or sulphur hexafluoride tracer (SF6). It was hypothesised that estimates of methane emission for individual animals and treatments would be similar for GF compared to RC or SF6 techniques. In experiment 1, maize or grass silage-based diets were fed to four growing Holstein heifers, whilst for experiment 2, four different heifers were fed four haylage treatments. Both experiments were a 4 × 4 Latin square design with 33 day periods. Green Feed measurements of methane emission were obtained over 7 days (days 22–28) and com-pared to subsequent RC measurements over 4 days (days 29–33). For experiment 3, 12growing heifers rotationally grazed three swards for 26 days, with simultaneous GF and SF6 measurements over two 4 day measurement periods (days 15–19 and days 22–26).Overall methane emissions (g/day and g/kg dry matter intake [DMI]) measured using GF in experiments 1 (198 and 26.6, respectively) and 2 (208 and 27.8, respectively) were similar to averages obtained using RC (218 and 28.3, respectively for experiment 1; and 209 and 27.7, respectively, for experiment 2); but there was poor concordance between the two methods (0.1043 for experiments 1 and 2 combined). Overall, methane emissions measured using SF6 were higher (P<0.001) than GF during grazing (186 vs. 164 g/day), but there was significant (P<0.01) concordance between the two methods (0.6017). There were fewer methane measurements by GF under grazing conditions in experiment 3 (1.60/day) com-pared to indoor measurements in experiments 1 (2.11/day) and 2 (2.34/day). Significant treatment effects on methane emission measured using RC and SF6 were not evident for GF measurements, and the ranking for treatments and individual animals differed using the GF system. We conclude that under our conditions of use the GF system was unable to detectsignificant treatment and individual animal differences in methane emissions that were identified using both RC and SF6techniques, in part due to limited numbers and timing ofmeasurements obtained. Our data suggest that successful use of the GF system is reliant on the number and timing of measurements obtained relative to diurnal patterns of methane emission.

A note on Chambers's "long memory and aggregation in macroeconomic time series"

Chambers (1998) explores the interaction between long memory and aggregation. For continuous-time processes, he takes the aliasing effect into account when studying temporal aggregation. For discrete-time processes, however, he seems to fail to do so. This note gives the spectral density function of temporally aggregated long memory discrete-time processes in light of the aliasing effect. The results are different from those in Chambers (1998) and are supported by a small simulation exercise. As a result, the order of aggregation may not be invariant to temporal aggregation, specifically if d is negative and the aggregation is of the stock type.

Early Bone Healing and Biomechanical Fixation of Dual Acid-Etched and As-Machined Implants with Healing Chambers: An Experimental Study in Dogs

Purpose: To evaluate the biomechanical fixation, bone-to-implant contact (BIC), and bone morphology of screw-type root-form implants with healing chambers with as-machined or dual acid-etched (DAE) surfaces in a canine model. Materials and Methods: The animal model included the placement of machined (n = 24) and DAE (n = 24) implants along the proximal tibiae of six mongrel dogs, which remained in place for 2 or 4 weeks. Following euthanasia, half of the specimens were subjected to biomechanical testing (torque to interface failure) and the other half were processed for histomorphologic and histomorphometric (%BIC) assessments. Statistical analyses were performed by one-way analysis of variance at the 95% confidence level and the Tukey post hoc test for multiple comparisons. Results: At 4 weeks, the DAE surface presented significantly higher mean values for torque to interface failure overall. A significant increase in %BIC values occurred for both groups over time. For both groups, bone formation through the classic appositional healing pathway was observed in regions where intimate contact between the implant and the osteotomy walls occurred immediately after implantation. Where contact-free spaces existed after implantation (healing chambers), an intramembranous-like healing mode with newly formed woven bone prevailed. Conclusions: In the present short-term evaluation, no differences were observed in BIC between groups; however, an increase in biomechanical fixation was seen from 2 to 4 weeks with the DAE surface. INT J ORAL MAXILLOFAC IMPLANTS 2011;26:75-82

Substrate distribution in fungus chambers in nests of Atta bisphaerica Forel, 1908 (Hym., Formicidae)

Substrate distribution was studied in three adult colonies of the leaf-cutting ant Atta bisphaerica Forel, 1908 using dye. Some supply holes were mapped using baits made from small plastic straws impregnated with citric pulp. Two holes, equidistant from one another, were then selected in each nest. The colonies were excavated completely 24 h after bait placement. During excavation, fungus chambers were checked for dye. We observed that the dyed baits were distributed in all sectors and at all depths regardless of where the baits had been placed. This supported the hypothesis that toxic baits placed in a single supply hole are uniformly distributed throughout the colony.

Ventilation of the giant nests of Atta leaf-cutting ants: does underground circulating air enter the fungus chambers?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance of the CMS drift tube chambers with cosmic rays

Studies of the performance of the CMS drift tube barrel muon system are described, with results based on data collected during the CMS Cosmic Run at Four Tesla. For most of these data, the solenoidal magnet was operated with a central field of 3.8 T. The analysis of data from 246 out of a total of 250 chambers indicates a very good muon reconstruction capability, with a coordinate resolution for a single hit of about 260 μm, and a nearly 100% efficiency for the drift tube cells. The resolution of the track direction measured in the bending plane is about 1.8 mrad, and the efficiency to reconstruct a segment in a single chamber is higher than 99%. The CMS simulation of cosmic rays reproduces well the performance of the barrel muon detector. © 2010 IOP Publishing Ltd and SISSA.

Performance study of the CMS barrel resistive plate chambers with cosmic rays

In October and November 2008, the CMS collaboration conducted a programme of cosmic ray data taking, which has recorded about 270 million events. The Resistive Plate Chamber system, which is part of the CMS muon detection system, was successfully operated in the full barrel. More than 98% of the channels were operational during the exercise with typical detection efficiency of 90%. In this paper, the performance of the detector during these dedicated runs is reported. © 2010 IOP Publishing Ltd and SISSA.

Performance of the CMS cathode strip chambers with cosmic rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47μm to 243μm. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns. © 2010 IOP Publishing Ltd and SISSA.

Aligning the CMS muon chambers with the muon alignment system during an extended cosmic ray run

The alignment system for the muon spectrometer of the CMS detector comprises three independent subsystems of optical and analog position sensors. It aligns muon chambers with respect to each other and to the central silicon tracker. System commissioning at full magnetic field began in 2008 during an extended cosmic ray run. The system succeeded in tracking muon detector movements of up to 18 mm and rotations of several milliradians under magnetic forces. Depending on coordinate and subsystem, the system achieved chamber alignment precisions of 140-350 μm and 30-200 μrad, close to the precision requirements of the experiment. Systematic errors on absolute positions are estimated to be 340-590 μm based on comparisons with independent photogrammetry measurements. © 2010 IOP Publishing Ltd and SISSA.