Interferentes bio-sócio-ambientais na exposição ao mercúrio em crianças ribeirinhas de diferentes regiões da Amazônia

No presente estudo foram analisados possíveis fatores bio-sócio-ambientais interferentes na exposição ao mercúrio em crianças ribeirinhas. Participaram 103 crianças das regiões do rio Tapajós, rio Acará e ilha do Marajó. O tipo de estudo foi seccional analítico. Foram colhidas amostras de cabelo para análise dos teores de Hgtotal, de sangue (análise de hemoglobina e hematócrito) e fezes. Foram utilizados índices antropométricos na análise do crescimento das crianças. Na avaliação do desenvolvimento neuropsicomotor foi aplicado o teste de triagem Denver II modificado. A maior média dos teores de Hgtotal em amostras de cabelo das crianças foi na região do Tapajós (5,58 μg/g) e 0,65 μg/g nas demais localidades. A prevalência de Hgtotal >10 μg/g foi 25% e 7,5% em São Luiz do Tapajós e Barreira. O consumo diário de peixes pelas famílias das crianças quando relacionado com teores de Hgtotal p(valor) foi < 0,05. A prevalência do tempo de amamentação das crianças nos grupos com menos de 12 meses e maior de 6 meses para as localidades do rio Tapajós, quando relacionadas com teores de Hgtotal no cabelo das crianças apresentou p(valor) <0,05. A prevalência de anemia nas crianças da região Tapajós era de 46,7% e quando relacionada com teores de Hgtotal p(valor) <0,0001.Os exames coproscópicos indicaram que 68,3% eram poliparasitadas, quando relacionadas com Hgtotal p(valor) <0,05. O perfil do crescimento observado através dos indicadores do estado nutricional era 82,6% com peso adequado para idade e 14,5% com peso muito baixo e baixo. O desempenho neuropsicomotor examinado pelo teste de triagem Denver II modificado apresentou cinco crianças como suspeitas de atraso no desenvolvimento. Concluiu-se que localidades no entorno de atividades garimpeira as crianças ribeirinhas são expostas ao risco de contaminação mercurial. Fatores bio-sócio-ambientais interferentes na exposição ao mercúrio tais como consumo diário de peixes, tempo de amamentação, anemia, enteroparasitoses apresentaram relações estatísticas significativas com o Hgtotal no cabelo das crianças.

Enhancing the versatility of alternate current biosusceptometry (ACB) through the synthesis of a dextrose-modified tracer and a magnetic muco-adhesive cellulose gel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Magnetically drivable nano-bio-conjugate mimicking free curcumin redox behavior

Curcumin possesses wide-ranging anti-inflammatory and anti-cancer properties and its biological activity can be correlated to its potent antioxidant capacity. Novel maghemite (gamma-Fe3O4) nanoparticles, characterized by a diameter of about 10 nm and possessing peculiar colloidal properties and surface interactions, called Surface Active Maghemite Nanoparticles (SAMN), were superficially modified with curcumin by simple incubation, due to the presence of under-coordinated Fe(III) atoms on nanoparticle surface. The resulting curcumin-modified SAMNs (SAMN@curcumin) were characterized by transmission electron microscopy (TEM), FTIR, Mossbauer, EPR and UV-Vis spectroscopy. The redox properties of bound curcumin were tested by electrochemistry. Finally, SAMN@curcumin was studied in the presence of different electroactive substances, namely hydroquinone, NADH and ferrocyanide, in order to assess its electrochemical behavior. Moreover, SAMN@curcumin was electrochemically tested in the presence of one of the most diffuse reactive oxygen specie, such as hydrogen peroxide, demonstrating its stability. SAMN@curcumin in which curcumin is firmly bound, but still retaining its redox features represents a feasible adduct: a magnetically drivable nano-bio-conjugate mimicking free Curcumin redox behavior. The proposed nanostructured material could be exploited as magnetic drivable curcumin vehicle for biomedical applications.

Surface characterization and osteoblast-like cells culture on collagen modified PLDLA scaffolds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bio-physical interactions and feedbacks in a global climate model

This PhD thesis addresses the topic of large-scale interactions between climate and marine biogeochemistry. To this end, centennial simulations are performed under present and projected future climate conditions with a coupled ocean-atmosphere model containing a complex marine biogeochemistry model. The role of marine biogeochemistry in the climate system is first investigated. Phytoplankton solar radiation absorption in the upper ocean enhances sea surface temperatures and upper ocean stratification. The associated increase in ocean latent heat losses raises atmospheric temperatures and water vapor. Atmospheric circulation is modified at tropical and extratropical latitudes with impacts on precipitation, incoming solar radiation, and ocean circulation which cause upper-ocean heat content to decrease at tropical latitudes and to increase at middle latitudes. Marine biogeochemistry is tightly related to physical climate variability, which may vary in response to internal natural dynamics or to external forcing such as anthropogenic carbon emissions. Wind changes associated with the North Atlantic Oscillation (NAO), the dominant mode of climate variability in the North Atlantic, affect ocean properties by means of momentum, heat, and freshwater fluxes. Changes in upper ocean temperature and mixing impact the spatial structure and seasonality of North Atlantic phytoplankton through light and nutrient limitations. These changes affect the capability of the North Atlantic Ocean of absorbing atmospheric CO2 and of fixing it inside sinking particulate organic matter. Low-frequency NAO phases determine a delayed response of ocean circulation, temperature and salinity, which in turn affects stratification and marine biogeochemistry. In 20th and 21st century simulations natural wind fluctuations in the North Pacific, related to the two dominant modes of atmospheric variability, affect the spatial structure and the magnitude of the phytoplankton spring bloom through changes in upper-ocean temperature and mixing. The impacts of human-induced emissions in the 21st century are generally larger than natural climate fluctuations, with the phytoplankton spring bloom starting one month earlier than in the 20th century and with ~50% lower magnitude. This PhD thesis advances the knowledge of bio-physical interactions within the global climate, highlighting the intrinsic coupling between physical climate and biosphere, and providing a framework on which future studies of Earth System change can be built on.

Electrochemical surface modification of Single walled carbon nanotubes and graphene-based electrodes for (bio)sensing applications

Sensors are devices that have shown widespread use, from the detection of gas molecules to the tracking of chemical signals in biological cells. Single walled carbon nanotube (SWCNT) and graphene based electrodes have demonstrated to be an excellent material for the development of electrochemical biosensors as they display remarkable electronic properties and the ability to act as individual nanoelectrodes, display an excellent low-dimensional charge carrier transport, and promote surface electrocatalysis. The present work aims at the preparation and investigation of electrochemically modified SWCNT and graphene-based electrodes for applications in the field of biosensors. We initially studied SWCNT films and focused on their topography and surface composition, electrical and optical properties. Parallel to SWCNTs, graphene films were investigated. Higher resistance values were obtained in comparison with nanotubes films. The electrochemical surface modification of both electrodes was investigated following two routes (i) the electrografting of aryl diazonium salts, and (ii) the electrophylic addition of 1, 3-benzodithiolylium tetrafluoroborate (BDYT). Both the qualitative and quantitative characteristics of the modified electrode surfaces were studied such as the degree of functionalization and their surface composition. The combination of Raman, X-ray photoelectron spectroscopy, atomic force microscopy, electrochemistry and other techniques, has demonstrated that selected precursors could be covalently anchored to the nanotubes and graphene-based electrode surfaces through novel carbon-carbon formation.

The Laboratory Evaluation of Bio Oil Derived From Waste Resources as Extender for Asphalt Binder

A shortage of petroleum asphalt is creating opportunities for engineers to utilize alternative pavement materials. Three types of bio oils, original bio oil (OB), dewatered bio oil (DWB) and polymer-modified bio oil (PMB) were used to modify and partially replace petroleum asphalt in this research. The research investigated the procedure of producing bio oil, the rheological properties of asphalt binders modified and partially replaced by bio oil, and the mechanical performances of asphalt mixtures modified by bio oil. The analysis of variance (ANOVA) is conducted on the test results for the significance analysis. The main finding of the study includes: 1) the virgin bioasphalt is softer than the traditional asphalt binder PG 58-28 but stiffer after RTFO aging because bio oil ages much faster than the traditional asphalt binder during mixing and compaction; 2) the binder test showed that the addition of bio oil is expected to improve the rutting performance while reduce the fatigue and low temperature performance; 3) both the mass loss and the oxidation are important reasons for the bio oil aging during RTFO test; the mixture test showed that 1) most of the bio oil modified asphalt mixture had slightly higher rutting depth than the control asphalt mixture, but the difference is not statistically significant; 2) the dynamic modulus of some of the bio oil modified asphalt mixture were slightly lower than the control asphalt mixture, the E* modulus is also not statistically significant; 3) most of the bio oil modified asphalt mixture had higher fatigue lives than the control asphalt mixture; 4) the inconsistence of binder test results and mixture test results may be attributed to that the aging during the mixing and compaction was not as high as that in the RTFO aging simulation. 5) the implementation of Michigan wood bioasphalt is anticipated to reduce the emission but bring irritation on eyes and skins during the mixing and compaction.

Bio recuperación de suelos salinos con el uso de materiales orgánicos.

El suelo es un importante recurso natural que necesita ser preservado y mejorado para permitirle mantener su calidad y capacidad productiva, para ello se deben proponer y aplicar prácticas sostenibles que permitan recuperar aquellos suelos degradados por un mal manejo del hombre, como por ejemplo la salinización. El objetivo planteado fue evaluar la biorecuperación de un suelo con problemas salino-sódico con la aplicación de dos proporciones (1,5 y 3% (p/p)) de tres enmiendas orgánicas: compost, vermicompost sólido y Lemna mesclados o no con el 100% de los requerimientos de fosfoyeso, generándose 15 tratamientos (incluyendo tres controles). La evaluación se realizó a través de tres ensayos: 1. Columnas simuladas de suelo. 2. Evolución de CO2 y 3. Crecimiento de plántulas de tomate. El suelo objeto de estudio está clasificado my como Fluventic Haplustepts, y fue tomado de una zona de la Hacienda Alto Viento, con una latitud de 10° 2' 15 N y una longitud de 72 ° 34' 15 W, en el estado de Zulia – Venezuela. Se tomó una muestra compuesta por 20 submuestras de 20 cm de profundidad del área problema, se secó al aire (2,3% de humedad), se tamizó y homogenizó. El suelo y las enmiendas orgánicas fueron caracterizadas. Los materiales orgánicos; compost y vermicompost fueron procesados en la misma Hacienda con el uso de estiércol de ganado bovino; la Lemna fue recolectada de orillas del Lago de Maracaibo en la ciudad de Maracaibo. El suelo se mezcló a las proporciones indicadas se le midió respiración basal y el efecto sobre la germinación de semillas de tomate y se empaquetó en un tubo de polietileno de 7,1 cm de diámetro y 70 a 90 cm de longitud, según la altura de la mezcla del suelo con la enmienda. El fondo de cada columna fue rellenado con 40 cm de arena lavada para facilitar el drenaje. En cada columna se utilizó la misma cantidad de suelo (1055 mg), la altura que ocupó dentro de las columnas dependió del tipo de enmienda orgánica y su proporción, la cual modificó la Da del suelo (1,328±0,05 g•cm-3). La altura dentro de la columna varió desde 20 cm para el suelo sin enmienda hasta 38,33±0,8 cm para el suelo enmendado con Lemna al 3,0%. Transcurrido el periodo de tres meses tiempo en el cual el suelo enmendado y colocado en las columnas fue lavado con una cantidad de agua que equivalente a la tasa de infiltración, la cual se calculó a partir de la precipitación anual de la zona y las perdidas por evaporación y escorrentía; se fraccionó en tres secciones de 7, 7 y 6 cm de longitud, y el suelo de cada fracción se secó al aire y se tamizó, y se le midió CEextr, pH, cationes en solución y cationes extraíbles para calcular el RAS y el PSI. Se tomó una cantidad equivalente de cada sección para conformar una muestra de 50 g de suelos a los cuales se le midió respiración basal e igualmente se tomó suelo para evaluar la germinación y crecimiento de plántulas de tomate. Se detectaron diferencias significativa (p<0,05) entre tratamientos, según la prueba de Tukey, para la variables evaluadas, aunque no hubo diferencias entre las proporciones ni entre la utilización del fosfoyeso mezclado con las enmiendas orgánicas. La enmienda que mostró menos potencial en la bio remediación fue la Lemna por sus altos contenidos de Na+. La metodología de las columnas simuladas del suelo, bajo las condiciones de estudio, no fue del todo adecuada para evaluar la bio remediación debido que en el suelo control por efecto de la aplicación de agua también hubo recuperación del mismo por su disminución en el la CE, RAS y PSI y en algunas variables su recuperación fue mayor que en aquellos enmendados con Lemna. Tomando en la respuesta del cultivo la mejor enmienda fue el vermicompost Abstract The soil is an important natural resource that needs to be preserved and improved to maintain its quality and production potential. Therefore, it is necessary to propose and apply sustainable practices that permit the recovery of soils that have been degraded by inadequate management, among these saline soils. The objective of this study was to evaluate the bioremediation of a saline-sodic soil through the application of two proportions (1,5 and 3% (p/p) of three organic amendments: compost, vermicompost and Lemna, mixed or not with gypsum phosphate, resulting in 15 treatments (including 3 controls). The evaluation was conducted through three tests: 1. Simulated soil columns. 2. Evolution of CO2 and 3. Growth of tomato seedlings The soil under evaluation was classified as Fluventic Haplustepts and was collected from the Alto Viento farm located at 10° 2' 15 North Latitude and 72° 34' 15 West longitude, in Zulia State, Venezuela. A composite soil sample, integrated of 20 subsamples taken to a depth of 20 cm collected in the problem area, was air dried (2.3 % moisture), sieved and homogenized. Soil and organic amendments were characterized. Organic material for the compost and vermicompost were obtained on the farm using cattle manure, whereas the Lemna was collected from the shores of Lake Maracaibo outside Maracaibo city. The soil was mixed in the above-mentioned proportions and its baseline respiration rate and effect on the germination of tomato seeds were recorded. Soil was packed in a PVC pipe (7,1 cm diameter and 70-90 cm length) to simulate a soil column. The bottom of each column was filled out with 40 cm of washed sand to facilitate drainage. The same amount of soil was used in each column (1,055 mg), but the height of the column varied according to the organic amendment and its proportion, which modified the apparent density of the soil (1,328±0,05 g•cm-3). The height of each column varied from 20 cm for the soil without amendment to 38,33±0,8 cm for the soil with 3% Lemna. After three months, the soil was treated with water (using the equivalent of the problem area infiltration rate), and was divided into three sections (7, 7 and 6 cm length). The soil from each section was air dried, sieved and its cationic exchange capacity, pH, cation solutions and extractable cations were measured to estimate RAS and PSI. An equivalent portion of each section was collected to compose a 50 g soil sample, and baseline respiration rate and tomato seedlings growth were recorded. Statistical differences (p<0,05) were observed among treatments for the variables under evaluation. Tukey test showed no differences among the proportions of organic amendments nor with the addition of gypsum phosphate to the organic amendments. The amendment which showed the lowest bioremediation potential was the Lemna, as a result of its high Na+ concentration. Under the conditions of this study, the soil column methodology used showed limitations to evaluate bioremediation because the control soil column, after being rinsed with water, also showed improvements as CE, RAS and PSI values were reduced. For some variables, the improvement noted in the control soil column surpassed those obtained with the soil amended with Lemna. Based on the best crop response amendment was vermicompost 3%.

(Bio)funcionalização de superfícies nanoestruturadas para eletrocatálise e desenvolvimento de biossensores eletroquímicos e óticos

Tese de doutoramento, Química (Química Física), Universidade de Lisboa, Faculdade de Ciências, 2016

Rosemary : a raw material for a new genre of bio-based antioxidants for sustainable applications

The potential replacement, partially or fully, of synthetic additives by bio-based alternatives derived from indigenous renewable non-food crop resources offers a market opportunity for a green supply of raw materials for different industrial and health products, with greater involvement of the farming community in crop production while addressing the ever more stringent environmental and pollution laws that now require the use of less potentially toxic/harmful ingredients, even if they are present in relatively small quantities. The work presented here relates to developing a new genre of environmentally-sustainable bio-based antioxidants (AO) for industrial uses that are obtained from extracts of UK-grown rosemary (Rosmarinus officinalis) plant. The performance of these AOs was tested, and their efficacy compared with some common and benchmark synthetic AOs from the same chemical class, in different products including polymers especially for packaging, as well as lubricants, cosmetics and health products. One of the main active ingredients in rosemary is Rosmarinic acid which is a water-soluble compound. This was chemically transformed into a number of ester derivatives, Rosmarinates, targeted for different applications. The parent and the modified antioxidants (the rosmarinates) were characterised and their antioxidancy were examined and tested in linear low-density polyethylene (LLDPE) and in polypropylene (PP) and compared with compounds of similar structure and with other well known synthetic antioxidants used commercially in polyolefins. The results show that antioxidants sourced from rosemary have the added benefit of being highly efficient and intrinsically more active than many synthetic and bio-based alternatives.

Enhanced oxidation activity from modified ceria: MnOx-ceria, CrOx-ceria and Mg doped VOx-ceria

Ceria is an important component of catalysts for oxidation reactions that proceed through the Mars-van Krevelen mechanism, promoting activity. A paradigm example of this is the VOx–CeO2 system for oxidative dehydrogenation reactions, where vanadium oxide species are supported on ceria and a special synergy between them is behind the enhanced activity: reduction of the catalyst is promoted by ceria undergoing reduction. This leads to favourable oxygen vacancy formation and hydrogen adsorption energies—useful descriptors for the oxidation activity of VOx–CeO2 catalysts. In this paper, we examine if this promoting effect on ceria-based catalysts holds for other metal oxide modifiers and we investigate MnOn– and CrOn–CeO2(111) (n = 0 − 4) as examples. We show, combining density functional theory calculations and statistical thermodynamics that similarly to the vanadia modifier, the stable species in each case is MnO2– and CrO2–CeO2. Both show favourable energetics for oxygen vacancy formation and hydrogen adsorption, indicating that VO2–CeO2 is not the only system of this type that can have an enhanced activity for oxidation reactions. However, the mechanism involved in each case is different: CrO2–CeO2 shows similar properties to VO2–CeO2 with ceria reduction upon oxygen removal stabilising the 5+ oxidation state of Cr. In contrast, with MnO2–CeO2, Mn is preferentially reduced. Finally, a model system of VO2–Mg:CeO2 is explored that shows a synergy between VO2 modification and Mg doping. These results shed light on the factors involved in active oxidation catalysts based on supported metal oxides on ceria that should be taken into consideration in a rational design of such catalysts.

New bio-based polymers: from synthesis to characterization

The environmental problems caused by human activity are one of the main themes of debate of the last Century. As regard plastics, the use of non-renewable sources together with the accumulation of waste in natural habitats are causing serious pollution problems. For this reason, a continuously growing interest is recorded around sustainable materials, potential candidate for the replacement of traditional recalcitrant plastics. Promising results have been obtained with biopolymers, in particular with the class of biopolyesters. Their potential biodegradability and biobased nature is particularly interesting mainly for food packaging, where the multilayer systems normally used and the contamination by organic matter create severe recycling limits. In this framework, the present research has been conducted with the aim of synthetizing, modifying and characterizing biopolymers for food packaging application. New bioplastics based on monomers derived from renewable resources were successfully synthetized by two-step melt polycondensation and chain extension reaction following the “Green chemistry” principles. Moreover, well-known biopolyesters have been modified by blending or copolymerization, both resulting effective techniques to ad hoc tune the polymer final characteristics. The materials obtained have been processed and characterized from the chemical, structural, thermal and mechanical point of view; more specific characterizations as compostability tests, surface hydrophilicity film evaluation and barrier property measurements were conducted.

Preparation and characterization of multifunctional bio-based polymers exhibiting enhanced properties

Driven by environmental reasons and the expected depletion of crude oil, bio-based polymers are currently undergoing a renaissance in the attempt to replace fossil-based ones. The present work aims at contributing in the development of the steps that start from biomass and move to new polymeric multifunctional materials. The study focuses on two bio-based building blocks (itaconic and vanillic acids) characterized by exploitable functionalities, i.e. a lateral double bond and a substituted aromatic ring respectively, able to confer interesting properties to the final polymers. The lateral double bond of dimethyl itaconate was functionalized via thia-Michael addition reaction obtaining a thermo-stable building block that can undergo polycondensation under classical conditions of reaction. The addition of a long lateral chain allows the polymer to express antimicrobial activity against Staphylococcus aureus making it attractive for packaging and targeting antimicrobial applications. Moreover, the architecture of the homopolymer was modified by means of copolymerization with dimethyl 2,5-furandicarboxylate thus improving the rigidity and obtaining a thermo-processable material. Potential applications as thermoset or thermoplastic material have been discussed. As concerns vanillic acid, the presence of aromatic rings on the polymer backbone imparts high thermal stability, but brittle behaviour in the homopolymer. Therefore, the architecture of the polyester was successfully tuned by means of copolymerization with a flexible bio-based comonomer, i.e. ω-pentadecalactone, providing processable random copolymers. An in depth investigation of water transport mechanism has been undertaken on the synthesized polyesters. Since the copolymers present a succession of aromatic and aliphatic units, as a consequence of the chemical structure water vapor permeability interposes between polyethylene and poly(ethylene terephthalate) proving that the copolyesters are suitable for packaging applications. Moving towards a sustainable model of development, novel sustainable synthetic pathways for the eco-design of new bio-based polymeric structures with high value functionalities and different potential applications have been successfully developed.

Valorization of bio-alcohols into added value chemicals

The present research work focused on the valorisation and upgrading of bio-ethanol over heterogeneous catalysts in a lab-scale continuous gas-flow system. In the Unibo laboratories, catalytic tests have been carried out in the temperature range 300-600°C by feeding an ethanol/He mixture in the reactor. After choosing the reaction conditions, ion-exchanged hydroxyapatite with transition metals (i.e., Fe, Cu) and alkaline earth metal (i.e., Sr) have been synthesized and tested. The Sr-HAP catalyst led to the formation of a complex reaction mixture the composition of which need further optimization in order to fill the requisite to be used as fuel-blend. Then, some zirconium-oxide based catalysts have been prepared through two different methods, precipitation and hydrothermal, by varying some synthetic parameters (i.e., pH, the nature of the base) and by adding a transition metal as dopant agent (i.e., Ti and Y). The presence of a dopant into the zirconia structure favoured the stabilization of the tetragonal or cubic phase against the monoclinic one. Interestingly, 5%mol Ti-doped zirconia exhibited a different catalytic behaviour yielding diethyl ether as major product at 300°C, while all the others samples produced mainly ethylene. Then, the effect of acid-base properties of sepiolite, using alkali metals (i.e., Na, K, Cs) with different metal loading (i.e., 2, 4, 5, 7, 14 wt%) as promoters, and of the redox properties of sepiolite-supported CuO or NiO, on the catalytic conversion of ethanol into n-butanol has been investigated. Thermal treated sepiolite samples mainly acted as acid catalyst, yielding preferentially the dehydration products of ethanol (ethylene and diethyl ether). Best results in terms of activity (ethanol conversion, 59%) and n-butanol selectivity (30%) where obtained at 400ºC and a contact time, W/F, of 2 g/mL·s over the catalyst consisting of sepiolite calcined at 500ºC modified with 7 wt% of cesium.

The Value Of The 2005 International Society Of Urological Pathology (isup) Modified Gleason Grading System As A Predictor Of Biochemical Recurrence After Radical Prostatectomy.

To compare time and risk to biochemical recurrence (BR) after radical prostatectomy of two chronologically different groups of patients using the standard and the modified Gleason system (MGS). Cohort 1 comprised biopsies of 197 patients graded according to the standard Gleason system (SGS) in the period 1997/2004, and cohort 2, 176 biopsies graded according to the modified system in the period 2005/2011. Time to BR was analyzed with the Kaplan-Meier product-limit analysis and prediction of shorter time to recurrence using univariate and multivariate Cox proportional hazards model. Patients in cohort 2 reflected time-related changes: striking increase in clinical stage T1c, systematic use of extended biopsies, and lower percentage of total length of cancer in millimeter in all cores. The MGS used in cohort 2 showed fewer biopsies with Gleason score ≤ 6 and more biopsies of the intermediate Gleason score 7. Time to BR using the Kaplan-Meier curves showed statistical significance using the MGS in cohort 2, but not the SGS in cohort 1. Only the MGS predicted shorter time to BR on univariate analysis and on multivariate analysis was an independent predictor. The results favor that the 2005 International Society of Urological Pathology modified system is a refinement of the Gleason grading and valuable for contemporary clinical practice.