Establishing erosion susceptibility: analytical hierarchical process and traditional approaches

This study evaluated alternatives for producing erosion susceptibility maps, considering different weight combinations for an environment's attributes, according to four different points of views. The attributes considered were landform, steepness, soils, rocks and land occupation. Considered alternatives were: (1) equal weights, more traditional approach, (2) different weights, according to a previous study in the area, (3) different weights, based on other works in the literature, and (4) different weights based on the analytical hierarchical process. The area studied included the Prosa Basin located in Campo Grande-Mato Grosso do Sul State, Brazil. The results showed that the assessed alternatives can be used together or in different stages of studies aiming at urban planning and decision-making on the interventions to be applied.

Influence of the Sol-Gel pH Process and Compact Film on the Efficiency of TiO2-Based Dye-Sensitized Solar Cells

The influence of pH during hydrolysis of titanium(IV) isopropoxide on the morphological and electronic properties of TiO2 nanoparticles prepared by the sol-gel method is investigated and correlated to the photoelectrochemical parameters of dye-sensitized solar cells (DSCs) based on TiO2 films. Nanoparticles prepared under acid pH exhibit smaller particle size and higher surface area, which result in higher dye loadings and better short-circuit current densities than DSCs based on alkaline TiO2-processed films. On the other hand, the product of charge collection and separation quantum yields in films with TiO2 obtained by alkaline hydrolysis is c. a. 27% higher than for the acid TiO2 films. The combination of acid and alkaline TiO2 nanoparticles as mesoporous layer in DSCs results in a synergic effect with overall efficiencies up to 6.3%, which is better than the results found for devices employing one of the nanoparticles separately. These distinct nanoparticles can be also combined by using the layer-by-layer technique (LbL) to prepare compact TiO2 films applied before the mesoporous layer. DSCs employing photoanodes with 30 TiO2 bilayers have shown efficiencies up to 12% higher than the nontreated photoanode ones. These results can be conveniently used to develop optimized synthetic procedures of TiO2 nanoparticles for several dye-sensitized solar cell applications.

Process and pattern in cichlid radiations - inferences for understanding unusually high rates of evolutionary diversification

The cichlid fish radiations in the African Great Lakes differ from all other known cases of rapid speciation in vertebrates by their spectacular trophic diversity and richness of sympatric species, comparable to the most rapid angiosperm radiations. I review factors that may have facilitated these radiations and compare these with insights from recent work on plant radiations. Work to date suggests that it was a coincidence of ecological opportunity, intrinsic ecological versatility and genomic flexibility, rapidly evolving behavioral mate choice and large amounts of standing genetic variation that permitted these spectacular fish radiations. I propose that spatially orthogonal gradients in the fit of phenotypes to the environment facilitate speciation because they allow colonization of alternative fitness peaks during clinal speciation despite local disruptive selection. Such gradients are manifold in lakes because of the interaction of water depth as an omnipresent third spatial dimension with other fitness-relevant variables. I introduce a conceptual model of adaptive radiation that integrates these elements and discuss its applicability to, and predictions for, plant radiations.

Towards a spatial understanding of trade-offs in sustainable development: A meso-scale analysis of the nexus between land use, poverty, and environment in the Lao PDR

In land systems, equitably managing trade-offs between planetary boundaries and human development needs represents a grand challenge in sustainability oriented initiatives. Informing such initiatives requires knowledge about the nexus between land use, poverty, and environment. This paper presents results from Lao PDR, where we combined nationwide spatial data on land use types and the environmental state of landscapes with village-level poverty indicators. Our analysis reveals two general but contrasting trends. First, landscapes with paddy or permanent agriculture allow a greater number of people to live in less poverty but come at the price of a decrease in natural vegetation cover. Second, people practising extensive swidden agriculture and living in intact environments are often better off than people in degraded paddy or permanent agriculture. As poverty rates within different landscape types vary more than between landscape types, we cannot stipulate a land use–poverty–environment nexus. However, the distinct spatial patterns or configurations of these rates point to other important factors at play. Drawing on ethnicity as a proximate factor for endogenous development potentials and accessibility as a proximate factor for external influences, we further explore these linkages. Ethnicity is strongly related to poverty in all land use types almost independently of accessibility, implying that social distance outweighs geographic or physical distance. In turn, accessibility, almost a precondition for poverty alleviation, is mainly beneficial to ethnic majority groups and people living in paddy or permanent agriculture. These groups are able to translate improved accessibility into poverty alleviation. Our results show that the concurrence of external influences with local—highly contextual—development potentials is key to shaping outcomes of the land use–poverty–environment nexus. By addressing such leverage points, these findings help guide more effective development interventions. At the same time, they point to the need in land change science to better integrate the understanding of place-based land indicators with process-based drivers of land use change.

Trade, economic growth and environment

The literature on trade openness, economic development, and the environment is largely inconclusive about the environmental consequences of trade. This study review previous studies focusing on treating trade and income as endogenous and estimating the overall impact of trade openness on environmental quality using the instrumental variables technique. The results show that whether or not trade has a beneficial effect on the environment varies depending on the pollutant and the country. Trade is found to benefit the environment in OECD countries. It has detrimental effects, however, on sulfur dioxide (SO2) and carbon dioxide (CO2) emissions in non-OECD countries, although it does lower biochemical oxygen demand (BOD) emissions in these countries. The results also find the impact is large in the long term, after the dynamic adjustment process, although it is small in the short term.

Survey on student motivation and approval of educational environment at Universidad Politécnica de Madrid within the European Higher Education area implementation

A recent study elaborated by Vicerrectorado de Ordenación Académica y Planificación Estratégica of Technical University of Madrid (UPM) defines the satisfaction of the university student body as "the response that the University offers to the expectations and demands of service of the students, considered in a general way ". Besides an indicator of academic and institutional insertion of the student, the assessment of student engagement allows us to adapt the academic offer and the extension services of the University to the real needs of the students. The process of convergence towards the European Higher Education Area (EHEA) raises the need to form in competitions, that is to say, of developing in our students capacities and knowledge beyond the purely theoretical-practical thing. Therefore, the perception and experience of the educational process and environment by the students is an important issue to be addressed to accomplish their expectations and achieve a curriculum accordingly to EHEA expectations. The present study aims to explore the student motivation and approval of the educational environment at the UPM. To this end a total of 97 students enrolled in the undergraduate program of Civil Engineering, Computer Engineering and Agronomic Engineering at UPM were surveyed. The survey consisted of 40 questions divided in three blocks. The first one of 20 questions of personal character in that they were gathering, besides the sex and the age, the degree of fulfilment, implication and dedication with the institution and the academic tasks. In the second block we identify 10 questions related to the perception of the student on the teaching quality, and finally a block of 10 questions regarding the Bologna Process. The students personal motivation was moderately high, with a score of 3.6 (all scores are provided on a 5-point scale), being the most valuable items obtaining a university degree (4,3) and the friendship between students (4,2). Any significant difference was shown between sexes (P=0.23) since the averages for this block of questions were of 3.7±0.3 and 3.5±0.4 for women and men respectively. The students are moderately satisfied with their graduate studies with an average score of 3,2, being the questions that reflect a minor satisfaction the research profile of the teachers (2,8) and the organization of the Schools (2,9). The best valued questions are related to the usefulness and quality of the degrees, with 3,5 and 3,4 respectively, and to the interest of the courses within the degree (3,4). For sexes, the results of this block of questions are similar (3.1±0.3 and 3.2±0.3 for men and women respectively=0.79). Also, there were no differences (P=0.39) between the students who arrange work and studies or do not work (3.1±0.2 and 3.2±0.3 respectively). In conclusion, students at UPM present an acceptable degree of motivation and satisfaction with regard to the studies and services that offer their respective Schools. Both characteristics receive the same value both for men and for women and so much for students who arrange work and studies as for those who devote themselves only to studying. In a significant way, students who are more engaged and are in-class attendants present the major degree of satisfaction.Overall, there is a great lack of information regarding the Bologna Process. In fact to the majority, they would like to know more on what it is, what it means and what changes will involve its implementation.

Project risk management:a combined analytic hierarchy process and decision tree approach

Time, cost and quality achievements on large-scale construction projects are uncertain because of technological constraints, involvement of many stakeholders, long durations, large capital requirements and improper scope definitions. Projects that are exposed to such an uncertain environment can effectively be managed with the application of risk management throughout the project life cycle. Risk is by nature subjective. However, managing risk subjectively poses the danger of non-achievement of project goals. Moreover, risk analysis of the overall project also poses the danger of developing inappropriate responses. This article demonstrates a quantitative approach to construction risk management through an analytic hierarchy process (AHP) and decision tree analysis. The entire project is classified to form a few work packages. With the involvement of project stakeholders, risky work packages are identified. As all the risk factors are identified, their effects are quantified by determining probability (using AHP) and severity (guess estimate). Various alternative responses are generated, listing the cost implications of mitigating the quantified risks. The expected monetary values are derived for each alternative in a decision tree framework and subsequent probability analysis helps to make the right decision in managing risks. In this article, the entire methodology is explained by using a case application of a cross-country petroleum pipeline project in India. The case study demonstrates the project management effectiveness of using AHP and DTA.

An empirical examination of the strategic decision-making process:the relationship between context, process, and outcomes

Despite concerted academic interest in the strategic decision-making process (SDMP) since the 1980s, a coherent body of theory capable of guiding practice has not materialised. This is because many prior studies focus only on a single process characteristic, often rationality or comprehensiveness, and have paid insufficient attention to context. To further develop theory, research is required which examines: (i) the influence of context from multiple theoretical perspectives (e.g. upper echelons, environmental determinism); (ii) different process characteristics from both synoptic formal (e.g. rationality) and political incremental (e.g. politics) perspectives, and; (iii) the effects of context and process characteristics on a range of SDMP outcomes. Using data from 30 interviews and 357 questionnaires, this thesis addresses several opportunities for theory development by testing an integrative model which incorporates: (i) five SDMP characteristics representing both synoptic formal (procedural rationality, comprehensiveness, and behavioural integration) and political incremental (intuition, and political behaviour) perspectives; (ii) four SDMP outcome variables—strategic decision (SD) quality, implementation success, commitment, and SD speed, and; (iii) contextual variables from the four theoretical perspectives—upper echelons, SD-specific characteristics, environmental determinism, and firm characteristics. The present study makes several substantial and original contributions to knowledge. First, it provides empirical evidence of the contextual boundary conditions under which intuition and political behaviour positively influence SDMP outcomes. Second, it establishes the predominance of the upper echelons perspective; with TMT variables explaining significantly more variance in SDMP characteristics than SD specific characteristics, the external environment, and firm characteristics. A newly developed measure of top management team expertise also demonstrates highly significant direct and indirect effects on the SDMP. Finally, it is evident that SDMP characteristics and contextual variables influence a number of SDMP outcomes, not just overall SD quality, but also implementation success, commitment, and SD speed.

Managing project risk using combined analytic hierarchy process and risk map

The main purpose of the study is to develop an integrated framework for managing project risks by analyzing risk across project, work package and activity levels, and developing responses. Design/methodology/approach: The study first reviews the literature of various contemporary risk management frameworks in order to identify gaps in project risk management knowledge. Then it develops a conceptual risk management framework using combined analytic hierarchy process (AHP) and risk map for managing project risks. The proposed framework has then been applied to a 1500 km oil pipeline construction project in India in order to demonstrate its effectiveness. The concerned project stakeholders were involved through focus group discussions for applying the proposed risk management framework in the project under study. Findings: The combined AHP and risk map approach is very effective to manage project risks across project, work package and activity levels. The risk factors in project level are caused because of external forces such as business environment (e.g. customers, competitors, technological development, politics, socioeconomic environment). The risk factors in work package and activity levels are operational in nature and created due to internal causes such as lack of material and labor productivity, implementation issues, team ineffectiveness, etc. Practical implications: The suggested model can be applied to any complex project and helps manage risk throughout the project life cycle. Originality/value: Both business and operational risks constitute project risks. In one hand, the conventional project risk management frameworks emphasize on managing business risks and often ignore operational risks. On the other hand, the studies that deal with operational risk often do not link them with business risks. However, they need to be addressed in an integrated way as there are a few risks that affect only the specific level. Hence, this study bridges the gaps. © 2010 Elsevier B.V. All rights reserved.

Optimization of flocculation process and continuous filtration for sea water primary treatment filtration to reduce SDI for entree to reverse osmosis system

Today , Providing drinking water and process water is one of the major problems in most countries ; the surface water often need to be treated to achieve necessary quality, and in this way, technological and also financial difficulties cause great restrictions in operating the treatment units. Although water supply by simple and cheap systems has been one of the important objectives in most scientific and research centers in the world, still a great percent of population in developing countries, especially in rural areas, don't benefit well quality water. One of the big and available sources for providing acceptable water is sea water. There are two ways to treat sea water first evaporation and second reverse osmosis system. Nowadays R.O system has been used for desalination because of low budget price and easily to operate and maintenance. The sea water should be pretreated before R.O plants, because there is some difficulties in raw sea water that can decrease yield point of membranes in R.O system. The subject of this research may be useful in this way, and we hope to be able to achieve complete success in design and construction of useful pretreatment systems for R.O plant. One of the most important units in the sea water pretreatment plant is filtration, the conventional method for filtration is pressurized sand filters, and the subject of this research is about new filtration which is called continuous back wash sand filtration (CBWSF). The CBWSF designed and tested in this research may be used more economically with less difficulty. It consists two main parts first shell body and second central part comprising of airlift pump, raw water feeding pipe, air supply hose, backwash chamber and sand washer as well as inlet and outlet connections. The CBWSF is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Inlet water is fed through the sand bed while the sand bed is moving downwards. The water gets filtered while the sand becomes dirty. Simultaneously, the dirty sand is cleaned in the sand washer and the suspended solids are discharged in backwash water. We analyze the behavior of CBWSF in pretreatment of sea water instead of pressurized sand filter. There is one important factor which is not suitable for R.O membranes, it is bio-fouling. This factor is defined by Silt Density Index (SDI).measured by SDI. In this research has been focused on decreasing of SDI and NTU. Based on this goal, the prototype of pretreatment had been designed and manufactured to test. The system design was done mainly by using the design fundamentals of CBWSF. The automatic backwash sand filter can be used in small and also big water supply schemes. In big water treatment plants, the units of filters perform the filtration and backwash stages separately, and in small treatment plants, the unit is usually compacted to achieve less energy consumption. The analysis of the system showed that it may be used feasibly for water treating, especially for limited population. The construction is rapid, simple and economic, and its performance is high enough because no mobile mechanical part is used in it, so it may be proposed as an effective method to improve the water quality and consequently the hygiene level in the remote places of the country.

Introducing a Business Process and Software Centric Approach for Enterprise System Teaching

To meet new challenges of Enterprise Systems that essentially go beyond the initial implementation, contemporary organizations seek employees with business process experts with software skills. Despite a healthy demand from the industry for such expertise, recent studies reveal that most Information Systems (IS) graduates are ill-equipped to meet the challenges of modern organizations. This paper shares insights and experiences from a course that is designed to provide a business process centric view of a market leading Enterprise System. The course, designed for both undergraduate and graduate students, uses two common business processes in a case study that employs both sequential and explorative exercises. Student feedback gained through two longitudinal surveys across two phases of the course demonstrates promising signs of the teaching approach.

Craft, process and art : teaching and learning music composition in higher education

This paper explores models of teaching and learning music composition in higher education. It analyses the pedagogical approaches apparent in the literature on teaching and learning composition in schools and universities, and introduces a teaching model as: learning from the masters; mastery of techniques; exploring ideas; and developing voice. It then presents a learning model developed from a qualitative study into students’ experiences of learning composition at university as: craft, process and art. The relationship between the students’ experiences and the pedagogical model is examined. Finally, the implications for composition curricula in higher education are presented.

Expression and connection : the integration of the reflective learning process and the writing process into social network sites

A number of instructors have recently adopted social network sites (SNSs) for learning. However, the learning design of SNSs often remains at a preliminary level similar to a personal log book because it does not properly include reflective learning elements such as individual reflection and collaboration. This article looks at the reflective learning process and the public writing process as a way of improving the quality of reflective learning on SNSs. It proposes a reflective learning model on SNSs based on two key pedagogical concepts for social networking: individual expression and collaborative connection. It is expected that the model would be helpful for instructors in designing a reflective learning process on SNSs in an effective and flexible way.

FDR and victims of family violence: Ensuring a safe process and outcomes

Family dispute resolution (FDR) is a positive first-stop process for family law matters, particularly those relating to disputes about children. FDR provides the parties with flexibility within a positive, structured and facilitated framework for what are often difficult and emotional negotiations. However, there are a range of issues that arise for victims of family violence in FDR that can make it a dangerous and unsafe process for them unless appropriate precautions are taken. This article discusses the nature of FDR and identifies the many positive aspects of it for women participants. The article then considers the nature and dynamic of family violence in order to contextualise the discussion that follows regarding concerns for the safety of participants in the FDR process. Finally, it offers some suggestions about how Australia could approach FDR differently to make it safer for victims of family violence.