DEVELOPMENT OF A DECISION/DEPLOYMENT SUPPORT TOOL FOR VARIABLE SPEED LIMITS IN RECURRENT CONGESTION

Traffic demand increases are pushing aging ground transportation infrastructures to their theoretical capacity. The result of this demand is traffic bottlenecks that are a major cause of delay on urban freeways. In addition, the queues associated with those bottlenecks increase the probability of a crash while adversely affecting environmental measures such as emissions and fuel consumption. With limited resources available for network expansion, traffic professionals have developed active traffic management systems (ATMS) in an attempt to mitigate the negative consequences of traffic bottlenecks. Among these ATMS strategies, variable speed limits (VSL) and ramp metering (RM) have been gaining international interests for their potential to improve safety, mobility, and environmental measures at freeway bottlenecks. Though previous studies have shown the tremendous potential of variable speed limit (VSL) and VSL paired with ramp metering (VSLRM) control, little guidance has been developed to assist decision makers in the planning phase of a congestion mitigation project that is considering VSL or VSLRM control. To address this need, this study has developed a comprehensive decision/deployment support tool for the application of VSL and VSLRM control in recurrently congested environments. The decision tool will assist practitioners in deciding the most appropriate control strategy at a candidate site, which candidate sites have the most potential to benefit from the suggested control strategy, and how to most effectively design the field deployment of the suggested control strategy at each implementation site. To do so, the tool is comprised of three key modules, (1) Decision Module, (2) Benefits Module, and (3) Deployment Guidelines Module. Each module uses commonly known traffic flow and geometric parameters as inputs to statistical models and empirically based procedures to provide guidance on the application of VSL and VSLRM at each candidate site. These models and procedures were developed from the outputs of simulated experiments, calibrated with field data. To demonstrate the application of the tool, a list of real-world candidate sites were selected from the Maryland State Highway Administration Mobility Report. Here, field data from each candidate site was input into the tool to illustrate the step-by-step process required for efficient planning of VSL or VSLRM control. The output of the tool includes the suggested control system at each site, a ranking of the sites based on the expected benefit-to-cost ratio, and guidelines on how to deploy the VSL signs, ramp meters, and detectors at the deployment site(s). This research has the potential to assist traffic engineers in the planning of VSL and VSLRM control, thus enhancing the procedure for allocating limited resources for mobility and safety improvements on highways plagued by recurrent congestion.

Sistema de gestão em segurança e saúde do trabalho (SGSST) integrando a norma OHSAS 18001 e NR-18: proposta para o setor da construção civil

The job security issue is crucial for the development of construction due to the need to ensure the health of workers, which is done by means of laws and production management. Thus, among various other laws, was enacted NR-18, in order to ensure the worker's minimum conditions for the development work. Despite legislative developments on the subject, they have become ineffective against the excessive number of accidents in the construction industry, bringing the company to greater in ensuring the health and safety of its workers. In view of this need for improvement of working environment in a general appearance, both for purposes of ensuring the law obedience as comfort for workers and quality of the organization, the System Health Management and Safety (OHSMS) is a valid tool demonstrates the evolution of business management, as well as OHSAS 18001 which proposes to ensure the efficiency and integration of a system geared to safety and health at work by means of implements and adaptations of it, in order to bring significant improvements to conditions of work, especially in the form of a new culture to be adopted by the company. Addressing the problem, this paper aims to develop a management system by OHSAS 18001 which is consistent with the terms of NR-18 as it is this integration of OHSMS Management System of the company as a usual practice of that aims at an improvement of work safety in the business of Buildings.

Using balanced scorecards to evaluate the data warehouse system utility

Dissertação de mestrado em Systems Engineering

Integration of an automatic storage and retrieval system (ASRS) in a discrete-part automation system

This technical report describes the work carried out in a project within the ERASMUS programme. The objective of this project was the Integration of an Automatic Warehouse in a Discrete-Part Automation System. The discrete-part automation system located at the LASCRI (Critical Systems) laboratory at ISEP was extended with automatic storage and retrieval of the manufacturing parts, through the integration of an automatic warehouse and an automatic guided vehicle (AGV).

Desenho e implementação de um data warehouse para a empresa AdClick

Esta dissertação incide sobre a problemática da construção de um data warehouse para a empresa AdClick que opera na área de marketing digital. O marketing digital é um tipo de marketing que utiliza os meios de comunicação digital, com a mesma finalidade do método tradicional que se traduz na divulgação de bens, negócios e serviços e a angariação de novos clientes. Existem diversas estratégias de marketing digital tendo em vista atingir tais objetivos, destacando-se o tráfego orgânico e tráfego pago. Onde o tráfego orgânico é caracterizado pelo desenvolvimento de ações de marketing que não envolvem quaisquer custos inerentes à divulgação e/ou angariação de potenciais clientes. Por sua vez o tráfego pago manifesta-se pela necessidade de investimento em campanhas capazes de impulsionar e atrair novos clientes. Inicialmente é feita uma abordagem do estado da arte sobre business intelligence e data warehousing, e apresentadas as suas principais vantagens as empresas. Os sistemas business intelligence são necessários, porque atualmente as empresas detêm elevados volumes de dados ricos em informação, que só serão devidamente explorados fazendo uso das potencialidades destes sistemas. Nesse sentido, o primeiro passo no desenvolvimento de um sistema business intelligence é concentrar todos os dados num sistema único integrado e capaz de dar apoio na tomada de decisões. É então aqui que encontramos a construção do data warehouse como o sistema único e ideal para este tipo de requisitos. Nesta dissertação foi elaborado o levantamento das fontes de dados que irão abastecer o data warehouse e iniciada a contextualização dos processos de negócio existentes na empresa. Após este momento deu-se início à construção do data warehouse, criação das dimensões e tabelas de factos e definição dos processos de extração e carregamento dos dados para o data warehouse. Assim como a criação das diversas views. Relativamente ao impacto que esta dissertação atingiu destacam-se as diversas vantagem a nível empresarial que a empresa parceira neste trabalho retira com a implementação do data warehouse e os processos de ETL para carregamento de todas as fontes de informação. Sendo que algumas vantagens são a centralização da informação, mais flexibilidade para os gestores na forma como acedem à informação. O tratamento dos dados de forma a ser possível a extração de informação a partir dos mesmos.

Materials handling in hospitals: An analysis of how the storage and materials handling system can be improved, using the example of Hospital Santa Maria

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Sistema de deteção de eventos adversos baseado num data warehouse

RESUMO - A Segurança do Doente tem assumido uma relevância crescente nas organizações de saúde, resultado da divulgação de diversos estudos que revelaram a magnitude deste problema e simultaneamente, de uma maior pressão por parte da opinião pública e da comunicação social. Este estudo pretende desenvolver e avaliar a performance de um sistema eletrónico de deteção de eventos adversos, baseado num Data Warehouse, por comparação com os resultados obtidos pela metodologia tradicional de revisão dos registos clínicos. O objetivo principal do trabalho consistiu em identificar um conjunto de triggers / indicadores de alerta que permitam detetar potenciais eventos adversos mais comuns. O sistema desenvolvido apresentou um Valor Preditivo Positivo de 18.2%, uma sensibilidade de 65.1% e uma especificidade de 68.6%, sendo constituído por nove indicadores baseados em informação clínica e 445 códigos do ICD-9-CM, relativos a diagnósticos e procedimentos. Apesar de terem algumas limitações, os sistemas eletrónicos de deteção de eventos adversos apresentam inúmeras potencialidades, nomeadamente a utilização em tempo real e em complemento a metodologias já existentes. Considerando a importância da problemática em análise e a necessidade de aprofundar os resultados obtidos neste trabalho de projeto, seria relevante a sua extensão a um universo mais alargado de instituições hospitalares, estando a sua replicabilidade facilitada, uma vez que o Data Warehouse tem por base um conjunto de aplicações disseminadas a nível nacional. O desenvolvimento e a consolidação dos sistemas eletrónicos de deteção de eventos adversos constitui inegavelmente uma área de futuro, com reflexos ao nível da melhoria da informação existente nas organizações e que contribuirá decisivamente para a melhoria dos cuidados de saúde prestados aos doentes.

Optimization of Transportation System by Tailored Logistics Network: A Case Study in Automotive Industry

This thesis aims to redesign the supply chain system in an automotive industry in order to obtain space reduction in the inventory by using tailored logistics network. The redesigning process by tailored supply chain will combine all possible shipment methods including direct shipment, milk-run, milk-run via distribution center and Kanban delivery. The current supply chain system in Nissan goes rather well when the production volume is in moderate level. However, when the production volume is high, there is a capacity problem in the warehouse to accommodate all delivered parts from suppliers. Hence, the optimization of supply chain system is needed in order to obtain efficient logistics process and effective inventory consumption. The study will use primary data for both qualitative and quantitative approach as the research methods. Qualitative data will be collected by conducting interviews with people related to procurement and inventory control. Quantitative data consists of list of suppliers with their condition in several parameters which will be evaluated and analyzed by using scoring method to assign the most suitable transportation network to each suppliers for improvement of inventory reduction in a cost efficient manner.

A Beacon based Localization System for Autonomous Mobile Robots and its Applications in Traffic and Transport Control

ACCURATE sensing of vehicle position and attitude is still a very challenging problem in many mobile robot applications. The mobile robot vehicle applications must have some means of estimating where they are and in which direction they are heading. Many existing indoor positioning systems are limited in workspace and robustness because they require clear lines-of-sight or do not provide absolute, driftfree measurements.The research work presented in this dissertation provides a new approach to position and attitude sensing system designed specifically to meet the challenges of operation in a realistic, cluttered indoor environment, such as that of an office building, hospital, industrial or warehouse. This is accomplished by an innovative assembly of infrared LED source that restricts the spreading of the light intensity distribution confined to a sheet of light and is encoded with localization and traffic information. This Digital Infrared Sheet of Light Beacon (DISLiB) developed for mobile robot is a high resolution absolute localization system which is simple, fast, accurate and robust, without much of computational burden or significant processing. Most of the available beacon's performance in corridors and narrow passages are not satisfactory, whereas the performance of DISLiB is very encouraging in such situations. This research overcomes most of the inherent limitations of existing systems.The work further examines the odometric localization errors caused by over count readings of an optical encoder based odometric system in a mobile robot due to wheel-slippage and terrain irregularities. A simple and efficient method is investigated and realized using an FPGA for reducing the errors. The detection and correction is based on redundant encoder measurements. The method suggested relies on the fact that the wheel slippage or terrain irregularities cause more count readings from the encoder than what corresponds to the actual distance travelled by the vehicle.The application of encoded Digital Infrared Sheet of Light Beacon (DISLiB) system can be extended to intelligent control of the public transportation system. The system is capable of receiving traffic status input through a GSM (Global System Mobile) modem. The vehicles have infrared receivers and processors capable of decoding the information, and generating the audio and video messages to assist the driver. The thesis further examines the usefulness of the technique to assist the movement of differently-able (blind) persons in indoor or outdoor premises of his residence.The work addressed in this thesis suggests a new way forward in the development of autonomous robotics and guidance systems. However, this work can be easily extended to many other challenging domains, as well.

Production and Delivery (Optimization of production system and reliability)

This thesis is done to solve two issues for Sayid Paper Mill Ltd Pakistan. Section one deals with a practical problem arise in SPM that is cutting a given set of raw paper rolls of known length and width, and a set of product paper rolls of known length (equal to the length of raw paper rolls) and width, practical cutting constraints on a single cutting machine, according to demand orders for all customers. To solve this problem requires to determine an optimal cutting schedule to maximize the overall cutting process profitability while satisfying all demands and cutting constraints. The aim of this part of thesis is to develop a mathematical model which solves this problem.Second section deals with a problem of delivering final product from warehouse to different destinations by finding shortest paths. It is an operational routing problem to decide the daily routes for sending trucks to different destination to deliver their final product. This industrial problem is difficult and includes aspect such as delivery to a single destination and multiple destinations with limited resources. The aim of this part of thesis is to develop a process which helps finding shortest path.

Aplicação do algoritmo Rough Sets em um Data Warehouse

This Project aims to develop methods for data classification in a Data Warehouse for decision-making purposes. We also have as another goal the reduction of an attribute set in a Data Warehouse, in which a given reduced set is capable of keeping the same properties of the original one. Once we achieve a reduced set, we have a smaller computational cost of processing, we are able to identify non-relevant attributes to certain kinds of situations, and finally we are also able to recognize patterns in the database that will help us to take decisions. In order to achieve these main objectives, it will be implemented the Rough Sets algorithm. We chose PostgreSQL as our data base management system due to its efficiency, consolidation and finally, it’s an open-source system (free distribution)

Progettazione di uno strumento di analisi dati per sistemi SCADA-ENERGY Management System

L’obiettivo di questa tesi è approfondire le competenze sulle funzionalità sviluppate nei sistemi SCADA/EMS presenti sul mercato, così da conoscerne le potenzialità offerte: tutte le conoscenze acquisite servono a progettare uno strumento di analisi dati flessibile e interattivo, con il quale è possibile svolgere analisi non proponibili con le altre soluzioni analizzate. La progettazione dello strumento di analisi dei dati è orientata a definire un modello multidimensionale per la rappresentazione delle informazioni: il percorso di progettazione richiede di individuare le informazioni d’interesse per l’utente, così da poterle reintrodurre in fase di progettazione della nuova base dati. L’infrastruttura finale di questa nuova funzionalità si concretizza in un data warehouse: tutte le informazioni di analisi sono memorizzare su una base dati diversa da quella di On.Energy, evitando di correlare le prestazione dei due diversi sottosistemi. L’utilizzo di un data warehouse pone le basi per realizzare analisi su lunghi periodi temporali: tutte le tipologie di interrogazione dati comprendono un enorme quantità d’informazioni, esattamente in linea con le caratteristiche delle interrogazioni OLAP

Integrating structured and unstructured data in a business-intelligence-system

The recent liberalization of the German energy market has forced the energy industry to develop and install new information systems to support agents on the energy trading floors in their analytical tasks. Besides classical approaches of building a data warehouse giving insight into the time series to understand market and pricing mechanisms, it is crucial to provide a variety of external data from the web. Weather information as well as political news or market rumors are relevant to give the appropriate interpretation to the variables of a volatile energy market. Starting from a multidimensional data model and a collection of buy and sell transactions a data warehouse is built that gives analytical support to the agents. Following the idea of web farming we harvest the web, match the external information sources after a filtering and evaluation process to the data warehouse objects, and present this qualified information on a user interface where market values are correlated with those external sources over the time axis.

Modelling spatial decisión support systems focused on the development of a data warehouse: applying software engineering

Nowadays, organizations have plenty of data stored in DB databases, which contain invaluable information. Decision Support Systems DSS provide the support needed to manage this information and planning médium and long-term ?the modus operandi? of these organizations. Despite the growing importance of these systems, most proposals do not include its total evelopment, mostly limiting itself on the development of isolated parts, which often have serious integration problems. Hence, methodologies that include models and processes that consider every factor are necessary. This paper will try to fill this void as it proposes an approach for developing spatial DSS driven by the development of their associated Data Warehouse DW, without forgetting its other components. To the end of framing the proposal different Engineering Software focus (The Software Engineering Process and Model Driven Architecture) are used, and coupling with the DB development methodology, (and both of them adapted to DW peculiarities). Finally, an example illustrates the proposal.