Características qualitativas da carne de frango de corte proveniente de diferentes sistemas de produção

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Visualization, manipulation and force spectroscopy of cylindrical polymer brushes

The Ph.D. thesis deals with the conformational study of individual cylindrical polymer brush molecules using atomic force microscopy (AFM). Imaging combined with single molecule manipulation has been used to unravel questions concerning conformational changes, desorption behavior and mechanical properties of individual macromolecules and supramolecular structures. In the first part of the thesis (chapter 5) molecular conformations of cylindrical polymer brushes with poly-(N-isopropylacrylamide) (PNIPAM) side chains were studied in various environmental conditions. Also micelle formation of cylindrical brush-coil blockcopolymers with polyacrylic acid side chains and polystyrene coil have been visualized. In chapter 6 the mechanical properties of single cylindrical polymer brushes with (PNIPAM) side chains were investigated. Assuming that the brushes adopt equilibrium conformation on the surface, an average persistence length of lp= (29 ± 3) nm was determined by the end-to-end distance vs. contour length analysis in terms of the wormlike chain (WLC) model. Stretching experiments suggest that an exact determination of the persistence length using force extension curves is impeded by the contribution of the side chains. Modeling the stretching of the bottle brush molecule as extension of a dual spring (side chain and main chain) explains the frequently observed very low persistence length arising from a dominant contribution of the side chain elasticity at small overall contour lengths. It has been shown that it is possible to estimate the “true” persistence length of the bottle brush molecule from the intercept of a linear extrapolation of the inverse square root of the apparent persistence length vs. the inverse contour length plot. By virtue of this procedure a “true” persistence length of 140 nm for the PNIPAM brush molecules is predicted. Chapter 7 and 8 deal with the force-extension behavior of PNIPAM cylindrical brushes studied in poor solvent conditions. The behavior is shown to be qualitatively different from that in a good solvent. Force induced globule-cylinder conformational changes are monitored using “molecule specific force spectroscopy” which is a combined AFM imaging and SMFS technique. An interesting behavior of the unfolding-folding transitions of single collapsed PNIPAM brush molecules has been observed by force spectroscopy using the so called “fly-fishing” mode. A plateau force is observed upon unfolding the collapsed molecule, which is attributed to a phase transition from a collapsed brush to a stretched conformation. Chapter 9 describes the desorption behavior of single cylindrical polyelectrolyte brushes with poly-L-lysine side chains deposited on a mica surface using the “molecule specific force spectroscopy” technique to resolve statistical discrepancies usually observed in SMFS experiments. Imaging of the brushes and inferring the persistence length from a end-to-end distance vs. contour length analysis results in an average persistence length of lp = (25 ± 5) nm assuming that the chains adopt their equilibrium conformation on the surface. Stretching experiments carried out on individual poly-L-lysine brush molecules by force spectroscopy using the “fly-fishing” mode provide a persistence length in the range of 7-23 nm in reasonable accordance with the imaging results. In chapter 10 the conformational behavior of cylindrical poly-L-lysine brush-sodium dodecyl sulfate complexes was studied using AFM imaging. Surfactant induced cylinder to helix like to globule conformational transitions were observed.

Introduzione di un sistema di accesso wireless distribuito a gestione centralizzata in ambiente di tipo Enterprise o Campus

Nata dal progetto di migrazione, in un ambiente consolidato, di una infrastruttura Wireless distribuita su territorio all'interno di una MAN (Metropolitan Area Network), si cerca di illustrare quali sono i passi fondamentali da seguire e con cosa ci si deve misurare per progettare una soluzione funzionale ed elaborare una strategia avendo a che fare con architetture complesse, dove la messa in esercizio di un servizio offerto ad un numero elevato di utenti prevede uno studio ben preciso delle attività da svolgere. Un'attenta analisi, ci consentirà di seguire e riadattare le scelte implementative in funzione delle esigenze infrastrutturali, illustrandone le difficoltà, gli imprevisti e le modifiche intraprese passo passo. Gli argomenti trattati tendono a far comprendere con quali problematiche si ha a che fare nella fase implementativa passando dalla fase di analisi a quella decisionale, quella di migrazione architetturale e di installazione, oltre che alla scelta delle componenti e delle tecnologie specifiche che, prima di essere portate a regime, devono essere sottoposte agli opportuni test per la comprensione/risoluzione di problematiche complesse; come le operazioni necessarie per operare con una efficace metodologia.

Food intake in nonpurging obese women who binge eat before and after a behavioral weight loss program

Little is known about the impact of behavioral programs to decrease binge eating in obese persons who do not purge. This study was conducted to compare the amount of change in the reduction of binge days and selected nutrients in women who had joined a behavioral weight loss program. Forty-six women in the behavioral self management (BSM) group and thirty-six women in the Wait List Control (WLC) groups completed seven day food records at baseline and six months. These records were analyzed for calories, percentage of calories from protein, carbohydrate, fat and dietary fiber/ 1000 calories and were marked as "binge" or "nonbinge" days. Foods were also divided into 12 food groups but only six contributing to fat intake were chosen for analysis: dairy; fat; grains and starchy vegetables; meat, fish, and poultry; meat, fish, and poultry combinations; snacks and desserts. At six months, there was no difference in the amount of change in any of the selected nutrients between the BSM and WLC groups or in the amount of change within each food group except in the meat, fish, and poultry combination and in the snacks and desserts groups because both groups experienced similar changes at six months. Binge and nonbinge day nutrient analysis by BSM and WLC showed that at baseline and six months within the BSM group, calories increased significantly on binge days. Within the WLC group at six months, percentage of calories from protein was significantly decreased on binge days.^ The significant finding of this study was the reduction in the amount of change in the number of binge days at six months between the BSM and WLC groups ($-$2.2 versus $-$1.1 respectively). These data suggest that behavioral programs can successful reduce binge days, but that significant change in food intake may require more intensive treatment. ^

Final report on Occupational Training Center for the Hard-Core Unemployed at Baltimore, Maryland /

"WLC file no. 1.F.1"

Whole life performance assessment: critical success factors

Whole life costing (WLC) has become the best practice in construction procurement and it is likely to be a major issue in predicting whole life costs of a construction project accurately. However, different expectations from different organizations throughout a project's life and the lack of data, monitoring targets, and long-term interest for many key players are obstacles to be overcome if WLC is to be implemented. A questionnaire survey was undertaken to investigate a set of ten common factors and 188 individual factors. These were grouped into eight critical categories (project scope, time, cost, quality, contract/administration, human resource, risk, and health and safety) by project phase, as perceived by the clients, contractors and subcontractors in order to identify critical success factors for whole life performance assessment (WLPA). Using a relative importance index, the top ten critical factors for each category, from the perspective of project participants, were analyzed and ranked. Their agreement on those categories and factors were analyzed using Spearman's rank correlation. All participants identify “Type of Project” as the most common critical factor in the eight categories for WLPA. Using the relative index ranking technique and weighted average methods, it was found that the most critical individual factors in each category were: “clarity of contract” (scope); “fixed construction period” (time); “precise project budget estimate” (cost); “material quality” (quality); “mutual/trusting relationships” (contract/administration); “leadership/team management” (human resource); and “management of work safety on site” (health and safety). There was relatively a high agreement on these categories among all participants. Obviously, with 80 critical factors of WLPA, there is a stronger positive relationship between client and contactor rather than contractor and subcontractor, client and subcontractor. Putting these critical factors into a criteria matrix can facilitate an initial framework of WLPA in order to aid decision making in the public sector in South Korea for evaluation/selection process of a construction project at the bid stage.

Las edades de Hitler. De Satán a un ser de carne y hueso, y su representación en clave paródica

Adolf Hitler suscitó desde su entrada en la escena política alemana una fascinación perversa, un sentimiento que, con el tiempo, ha dado lugar a numerosas representaciones culturales sobre el Führer. La muestra, rica y variada tanto en el fondo como en la forma, nos permitirá trazar tres estadios en lo referente al proceso de construcción historiográfica del hitlerismo, iniciado con la caída del Tercer Reich. Estos responden en buena medida al devenir sociopolítico y cultural de la sociedad a escala global desde el final de la guerra y hasta nuestros días y pueden resumirse en tres: primero, la satanización; segundo, la humanización; tercero, el retrato caricaturesco. Proponemos un recorrido histórico por diversos productos culturales del dictador alemán cuyo propósito es desentrañar el retrato psicológico poliédrico que se ha construido en torno a la figura de Hitler.

Hybridituotannonohjauksen määrittäminen ja toteutusmallit

Kandidaatintyön tarkoituksena on tarkastella hybridituotannonohjausmallin muodostamista sekä käytännön toteutusta kirjallisten lähteiden pohjalta. Työ pyrkii soveltamaan kirjallisuuskatsausta ikkuna- ja ovivalmistukseen. Soveltavan osuuden tavoitteena on selvittää pystytäänkö alalla hyödyntämään hybridituotannonohjausta ja miten sen mahdollinen toteutus tapahtuisi. Kirjallisuudesta selviää kuinka tuotteet jaotellaan tuotannonohjausmuotoihin ja millä mahdollisilla malleilla hybridituotantoa voidaan ohjata käytännössä. Kandidaatintyön soveltavaan osaan kuuluu ikkuna- ja ovivalmistajille lähetettävä kysely, jonka tavoitteena on selvittää miten tuotantoa ohjataan ja mitkä tekijät vaikuttavat tuotannonohjausmuodon valintaan. Tuloksista selviää, että suomalaiset ikkunavalmistajat valmistavat tuotteensa tilausohjautuvasti, koska tuotevariaatioiden määrä on korkea ja asiakkaiden toimitusaikavaatimukset mahdollistavat pidemmät toimitusajat. Tästä syystä esimerkkiyritykseksi valikoitui kiinalainen ovivalmistaja, joka ohjaa tuotantoaan varasto-ohjautuvasti. Kandidaatintyön soveltavasta osiosta selvisi, että tällaisessa tapauksessa hybridituotannonohjauksen keinoin voidaan saavuttaa säästöjä varastonpitokustannuksissa ilman, että toimitusajat kasvavat asiakkaan kannalta liikaa. Kandidaatintyön tuloksia ei kuitenkaan voida soveltaa automaattisesti koko alalle yrityskohtaisten erojen takia, jonka takia hybridituotannon soveltuvuus tulisi aina tarkastella yrityskohtaisesti. Mikäli yritys valmistaa edes osan tuotannostaan varasto-ohjautuvasti, on mahdollista että hybridituotannonohjauksella voidaan saada aikaan säästöjä varastonpitokustannuksissa.

Synchronization of Heteroclinic Circuits Through Learning in Chains of Neural Motifs

The synchronization of oscillatory activity in networks of neural networks is usually implemented through coupling the state variables describing neuronal dynamics. In this study we discuss another but complementary mechanism based on a learning process with memory. A driver network motif, acting as a teacher, exhibits winner-less competition (WLC) dynamics, while a driven motif, a learner, tunes its internal couplings according to the oscillations observed in the teacher. We show that under appropriate training the learner motif can dynamically copy the coupling pattern of the teacher and thus synchronize oscillations with the teacher. Then, we demonstrate that the replication of the WLC dynamics occurs for intermediate memory lengths only. In a unidirectional chain of N motifs coupled through teacher-learner paradigm the time interval required for pattern replication grows linearly with the chain size, hence the learning process does not blow up and at the end we observe phase synchronized oscillations along the chain. We also show that in a learning chain closed into a ring the network motifs come to a consensus, i.e. to a state with the same connectivity pattern corresponding to the mean initial pattern averaged over all network motifs.