Urban trees and atmospheric pollutants in big cities: Effects in Madrid

Una investigación sobre la mejora de la contaminación del aire (CA) por medio de arbolado urbano se realizó en Madrid, una ciudad con casi 4 M de habitantes, 2,8 M de vehículos y casi 3 M de árboles de mantenimiento público. La mayoría de los árboles estaban en dos bosques periurbanos. Los 650.000 restantes era pies de alineación y parques. Los taxones estudiados fueron Platanus orientalis (97.205 árboles), Ulmus sp. (70.557), Pinus pinea (49.038), Aesculus hippocastanum (22.266), Cedrus sp. (13.678) y Quercus ilex (1.650), de calles y parques. Muestras foliares se analizaron en diferentes épocas del año, así como datos de contaminación por PM10 de 28 estaciones de medición de la contaminación durante 30 años, y también la intensidad del tráfico (IMD) en 2.660 calles. La acumulación de metales pesados (MP) sobre hojas y dentro de estas se estimó en relación con la CA y del suelo y la IMD del tráfico. La concentración media de Ba, Cd, Cr, Cu, Mn, Ni, Pb y Zn en suelo (materia seca) alcanzó: 489,5, 0,7, 49,4, 60,9, 460,9, 12,8, 155,9 y 190,3 mg kg-1 respectivamente. Los árboles urbanos, particularmente coníferas (debido a la mayor CA en invierno) contribuyen significativamente a mejorar la CA sobre todo en calles con alta IMD. La capacidad de las seis sp. para capturar partículas de polvo en su superficies foliares está relacionada con la IMD del tráfico y se estimó en 16,8 kg/año de MP tóxicos. Pb y Zn resultaron ser buenos marcadores antrópicos en la ciudad en relación con el tráfico, que fue la principal fuente de contaminación en los árboles y suelos de Madrid. Las especies de árboles variaron en función de su capacidad para capturar partículas (dependiendo de las propiedades de sus superficies foliares) y acumular los MP absorbidos de los suelos. Las concentraciones foliares de Pb y Zn estuvieron por encima de los límites establecidos en diferentes sitios de la ciudad. La microlocalización de Zn mediante microscópico mostró la translocación al xilema y floema. Se detectaron puntos de contaminación puntual de Cu and Cr en antiguos polígonos industriales y la distribución espacial de los MP en los suelos de Madrid mostró que en incluso en zonas interiores del El Retiro había ciertos niveles elevados de [Pb] en suelo, tal vez por el emplazamiento la Real Fábrica de Porcelana en la misma zona hace 200 años. Distintas áreas del centro de la ciudad también alcanzaron niveles altos de [Pb] en suelo. Según los resultados, el empleo de una combinación de Pinus pinea con un estrato intermedio de Ulmus sp. y Cedrus sp. puede ser la mejor recomendación como filtro verde eficiente. El efecto del ozono (O3) sobre el arbolado en Madrid fue también objeto de este estudio. A pesar de la reducción de precursores aplicada en muchos países industrializados, O3 sigue siendo la principal causa de CA en el hemisferio norte, con el aumento de [O3] de fondo. Las mayores [O3] se alcanzaron en regiones mediterráneas, donde el efecto sobre la vegetación natural es compensado por el xeromorfismo y la baja conductancia estomática en respuesta los episodios de sequía estival característicos de este clima. Durante una campaña de monitoreo, se identificaron daños abióticos en hojas de encina parecidos a los de O3 que estaban plantadas en una franja de césped con riego del centro de Madrid. Dada la poca evidencia disponible de los síntomas de O3 en frondosas perennifolias, se hizo un estudio que trató de 1) confirman el diagnóstico de daño de O3, 2) investigar el grado de los síntomas en encinas y 3) analizar los factores ambientales que contribuyeron a los daños por O3, en particular en lo relacionado con el riego. Se analizaron los marcadores macro y micromorfológicos de estrés por O3, utilizando las mencionadas encinas a modo de parcela experimental. Los síntomas consistieron en punteado intercostal del haz, que aumentó con la edad. Además de un punteado subyacente, donde las células superiores del mesófilo mostraron reacciones características de daños por O3. Las células próximas a las zonas dañadas, presentaron marcadores adicionales de estrés oxidativo. Estos marcadores morfológicos y micromorfológicos de estrés por O3 fueron similares a otras frondosas caducifolias con daños por O3. Sin embargo, en nuestro caso el punteado fue evidente con AOT40 de 21 ppm•h, asociada a riego. Análisis posteriores mostraron que los árboles con riego aumentaron su conductancia estomática, con aumento de senescencia, manteniéndose sin cambios sus características xeromórficas foliares. Estos hallazgos ponen de relieve el papel primordial de la disponibilidad de agua frente a las características xeromórficas a la hora de manifestarse los síntomas en las células por daños de O3 en encina. ABSTRACT Research about air pollution mitigation by urban trees was conducted in Madrid (Spain), a southern European city with almost 4 M inhabitants, 2.8 M daily vehicles and 3 M trees under public maintenance. Most trees were located in two urban forests, while 650'000 trees along urban streets and in parks. The urban taxa included Platanus orientalis (97'205 trees), Ulmus sp. (70’557), Pinus pinea (49'038), Aesculus hippocastanum (22’266), Cedrus sp. (13'678 and Quercus ilex (1'650) along streets and parks. Leave samples were analysed sequentially in different seasons, PM10 data from 28 air monitoring stations during 30 years and traffic density estimated from 2’660 streets. Heavy metal (HM) accumulation on the leaf surface and within leaves was estimated per tree related to air and soil pollution, and traffic intensity. Mean concentration of Ba, Cd, Cr, Cu, Mn, Ni, Pb and Zn in topsoil samples (dry mass) amounted in Madrid: 489.5, 0.7, 49.4, 60.9, 460.9, 12.8, 155.9 and 190.3 mg kg-1 respectively. Urban trees, particularly conifers (due to higher pollution in winter) contributed significantly to alleviate air pollution especially near to high ADT roads. The capacity of the six urban street trees species to capture air-born dust on the foliage surface as related to traffic intensity was estimated to 16.8 kg of noxious metals from exhausts per year. Pb and Zn pointed to be tracers of anthropic activity in the city with vehicle traffic as the main source of diffuse pollution on trees and soils. Tree species differed by their capacity to capture air-borne dust (by different leaf surface properties) and to allocate HM from soils. Pb and Zn concentrations in the foliage were above limits in different urban sites and microscopic Zn revelation showed translocation in xylem and phloem tissue. Punctual contamination in soils by Cu and Cr was identified in former industrial areas and spatial trace element mapping showed for central Retiro Park certain high values of [Pb] in soils even related to a Royal pottery 200 years ago. Different areas in the city centre also reached high levels [Pb] in soils. According to the results, a combination of Pinus pinea with understorey Ulmus sp. and Cedrus sp. layers can be recommended for the best air filter efficiency. The effects of ozone (O3) on trees in different areas of Madrid were also part of this study. Despite abatement programs of precursors implemented in many industrialized countries, ozone remained the main air pollutant throughout the northern hemisphere with background [O3] increasing. Some of the highest ozone concentrations were measured in regions with a Mediterranean climate but the effect on the natural vegetation is alleviated by low stomatal uptake and frequent leaf xeromorphy in response to summer drought episodes characteristic of this climate. During a bioindication survey, abiotic O3-like injury was identified in foliage. Trees were growing on an irrigated lawn strip in the centre of Madrid. Given the little structural evidence available for O3 symptoms in broadleaved evergreen species, a study was undertaken in 2007 with the following objectives 1) confirm the diagnosis, 2) investigate the extent of symptoms in holm oaks growing in Madrid and 3) analyse the environmental factors contributing to O3 injury, particularly, the site water supply. Therefore, macro- and micromorphological markers of O3 stress were analysed, using the aforementioned lawn strip as an intensive study site. Symptoms consisted of adaxial and intercostal stippling increasing with leaf age. Underlying stippling, cells in the upper mesophyll showed HR-like reactions typical of ozone stress. The surrounding cells showed further oxidative stress markers. These morphological and micromorphological markers of ozone stress were similar to those recorded in deciduous broadleaved species. However, stippling became obvious already at an AOT40 of 21 ppm•h and was primarily found at irrigated sites. Subsequent analyses showed that irrigated trees had their stomatal conductance increased and leaf life-span reduced whereas their leaf xeromorphy remained unchanged. These findings suggest a central role of water availability versus leaf xeromorphy for ozone symptom expression by cell injury in holm oak.

Impacto en la seguridad operacional por la introducción de nuevos procedimientos en cabina debido a la implantación de futuros conceptos de separación entre aeronaves en la fase de vuelos en ruta

A menudo, la fase del vuelo en ruta sobre áreas de baja densidad de tráfico, se desarrollan en espacios aéreos de alta cota, en los que el servicio de vigilancia es deficiente o simplemente no existente. En este tipo de espacio aéreo garantizar las separaciones entre aeronaves desde el segmento terrestre requiere de procedimientos adecuados a los medios disponibles y que, en general, desembocan en la utilización de unas mínimas de separación muy grandes. En este tipo de espacio aéreo, se ha planteado desde distintos organismos la posibilidad de delegar la responsabilidad de la separación a la aeronave, desarrollando ésta las funciones necesarias para poder asumir tal responsabilidad sin disminuir los umbrales de seguridad. Para que la aeronave pueda asumir la responsabilidad de la separación es necesario dotar a las tripulaciones de nuevos medios técnicos y procedimientos operacionales, los cuales trabajando de forma continua y automática permitan el desarrollo seguro del vuelo en esas circunstancias. El planteamiento de algunos de estos sistemas embarcados así como su validación desde el punto de vista de su aceptación por las tripulaciones es el objetivo del trabajo de investigación realizado y cuyos resultados se presentan en esta tesis. El sistema que se propone trata de resolver los riesgos con los tráficos circundantes garantizando la auto‐separación en vuelo de crucero, evitando y resolviendo conflictos. La aeronave que detecta un riesgo/conflicto negocia una propuesta de solución con la aeronave “intrusa”, una vez la propuesta ha sido negociada, el piloto confirma la maniobra a realizar por la aeronave, la aeronave radiodifunde un mensaje con las intenciones de la maniobra, seguidamente el piloto automático maniobra el avión para implementar la solución y el director de vuelo muestra al piloto la maniobra que se está realizando. ABSTRACT The flight in route phase over areas of low traffic density is usually performed in high altitude airspace, in which the surveillance system is deficient or simply nonexistent. In this type of airspace, to guarantee the separation between aircrafts from the ground, adequate procedures are required to be used with the available systems, and this generally leads to the use of high separation minima. Also, in this type of airspace, it has been discussed by several organizations the possibility of delegating the responsibility of the aircraft separation to the aircraft itself, it carrying out the necessary functions to take on such responsibility without lowering the safety threshold. In order for the aircraft to take on the responsibility of the separation, it is necessary to provide the crew with new technical means and operational procedures, which will result in safe flight under those circumstances. The discussion of some of these systems and their validation from the point of view of acceptance by the crews is the objective of this achieved research work, the findings of which are presented here. The proposed system assists in the surveillance providing the autopilot with information to guarantee the self‐separation with the surrounding in flight traffic, avoiding and solving conflicts. The aircraft which detects the risk/conflict starts a negotiation with the intruder aircraft for finding a conflict resolution, then the pilot of the aircraft approves the solution maneuver and the aircraft broadcasts a message with the maneuver which will be executed. The autopilot maneuvers the aircraft to execute the solution, the evolution of which is shown in the proposed system display and the flight director.

Análisis de algoritmos para posicionamiento de aeronaves mediante respuestas SSR utilizando recepción omnidireccional

El transporte aéreo constituye un sector estratégico para el crecimiento económico de cualquier país. El sistema de gestión de tráfico aéreo ATM tiene como objetivo el movimiento seguro y eficiente de las aeronaves dentro del espacio aéreo y de los aeropuertos, siendo la seguridad, en la fase táctica, gestionada por el servicio de control de la circulación aérea. Mediante los procesos de control el tráfico aéreo es vigilado a través de sensores, regulado y guiado de forma organizada y segura. Es precisamente sobre la vigilancia donde se enfoca el contenido de la tesis, en el desarrollo de nuevos conceptos que proporcionen información de vigilancia de ‘bajo coste’ basados en las señales existentes proporcionadas por la infraestructura actual de radar secundario y por los sistemas de posicionamiento basados en satélite que utiliza la ADS-B. El conocimiento y acceso en tiempo real a las trayectorias de las aeronaves es un elemento de valor añadido no sólo para la provisión de los servicios de control de tránsito aéreo, sino para todos los actores del transporte aéreo o de la investigación, siendo uno de los elementos clave en el concepto operacional de los dos grandes proyectos tecnológicos, SESAR en Europa y NextGen en EE.UU.. En las últimas décadas el control de la circulación aérea en espacios aéreos de media y alta densidad de tráfico se ha basado en tecnologías complejas que requieren importantes infraestructuras como son el radar primario de vigilancia (PSR) y el radar secundario de vigilancia (SSR). La filosofía de los programas SESAR y NextGen siguiendo las directrices de la OACI es la de alejarse de las tecnologías basadas en tierra para evolucionar hacia nuevas tecnologías más dinámicas basadas en satélite como la ADS-B. Pero hasta que la implementación y operación de la ADS-B sea completa, existirá un período de transición que implica la coexistencia de aeronaves equipadas o no con ADS-B. El objetivo de la presente Tesis es determinar las metodologías y algoritmos más adecuados para poder hibridar las dos tecnologías descritas anteriormente, utilizando para ello un receptor de bajo coste con antena estática omnidireccional, que analice todas las señales presentes en el canal que comparten el SSR y ADS-B. Mediante esta hibridación se podrá obtener la posición de cualquier aeronave que transmita respuestas a interrogaciones SSR, en cualquiera de sus modos de trabajo, o directamente mensajes de posición ADS-B. Para desarrollar los algoritmos propuestos, además del hardware correspondiente, se han utilizado las aplicaciones LabVIEW para funciones de adquisición de datos reales, y el software MATLAB® para el desarrollo de algoritmos y análisis de datos. La validación de resultados se ha realizado mediante los propios mensajes de posición ADS-B y a través de las trazas radar proporcionadas por la entidad pública empresarial ENAIRE. La técnica desarrollada es autónoma, y no ha requerido de ninguna otra entrada que no sea la recepción omnidireccional de las señales. Sin embargo para la validación de resultados se ha utilizado información pública de las ubicaciones de la red de estaciones SSR desplegadas sobre territorio español y portugués y trazas radar. Los resultados obtenidos demuestran, que con técnicas basadas en superficies de situación definidas por los tiempos de llegada de las respuestas, es posible determinar con una precisión aceptable la posición de las estaciones SSR y la posición de cualquier aeronave que responda mediante el Modo A a éstas. ABSTRACT Air transport is a strategic sector for the economic growth of any country. The air traffic management system (ATM) aims at the safe and efficient movement of aircraft while operating within the airspace and airports, where safety, in the tactical phase, is managed by the air traffic control services. Through the air traffic control processes, aircraft are monitored by sensors, regulated and guided in an organized and safe manner. It is precisely on surveillance where this thesis is focused, developing new concepts that provide a 'low cost' surveillance information based on existing signals provided by currently secondary radar infrastructure and satellite-based positioning systems used by ADS-B. Having a deeper knowledge and a real-time access to the trajectories of the aircraft, is an element of added value not only for the provision of air traffic control services, but also for all air transport or research actors. This is one of the key elements in the operational concept proposed by the two large scale existing technological projects, SESAR in Europe and NextGen in the US. In recent decades, air traffic control in medium and high traffic density areas has been based on complex technologies requiring major infrastructures, such as the primary surveillance radar (PSR) and secondary surveillance radar (SSR). The philosophy of SESAR and NextGen programs, both following the guidelines of ICAO, is to move away from land-based technologies and evolving into some new and more dynamic satellite-based technologies such as ADS-B. Nevertheless, until the ADS-B implementation and operation is fully achieved, there will be a transitional period where aircraft with and without ADS-B equipment will have to coexist. The main objective of this thesis is to determine those methodologies and algorithms which are considered more appropriate to hybridize those two technologies, by using a low cost omnidirectional receiver, which analyzes all signals on the SSR and ADS-B shared channel. Through this hybridization, it is possible to obtain the position of any aircraft answering the SSR interrogations, in any of its modes of operation, or through the emission of ADS-B messages. To develop the proposed algorithms, LabVIEW application has been used for real-time data acquisition, as well as MATLAB software for algorithm development and data analysis, together with the corresponding hardware. The validation of results was performed using the ADS-B position messages and radar tracks provided by the Public Corporate Entity ENAIRE The developed technique is autonomous, and it does not require any other input other than the omnidirectional signal reception. However, for the validation of results, not only radar records have been used, but also public information regarding the position of SSR stations spread throughout the Spanish and Portuguese territory. The results show that using techniques based in the definition of positioning surfaces defined by the responses’ times of arrival, it is possible to determine with an acceptable level of accuracy both the position of the SSR stations as well as the position of any aircraft which transmits Mode A responses.

Wide Area Detection System (WADS) - breadboard software description and field test results. Final report.

Federal Highway Administration, Washington, D.C.

Relationships between off-road fixed-object accident rates and roadway elements of urban highways. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Gázolaj-jövedékiadó verseny az Európai Unióban (Fiscal competition on the market for diesel fuel in the European Union)

A tanulmány azt a kérdést vizsgálja, hogy versenyeznek-e az európai kormányok gázolajra vonatkozó jövedékiadó-kulcsaikkal a nagyobb adóbevételekért, és ha igen, befolyásolja-e az országok mérete kormányaik adóztatási stratégiáját. Az üzemanyagturizmussal szembesülő kormányok adókivetési magatartását egy kétországos adóverseny modellel jelezzük előre, amelyben a standard modellektől eltérően a fogyasztók kereslete árrugalmas. Megmutatjuk, hogy ha a kereslet nem teljesen rugalmatlan, mint Nielsen [2001], illetve Kanbur-Keen [1993] modelljeiben, akkor a nagy ország kormányának egyensúlyi viselkedése nemcsak abban különbözik a kicsiétől, hogy nagyobb adót állapít meg, hanem abban is, hogy válaszfüggvénye meredekebb. Az aszimmetrikus adóverseny általunk használt modelljét a dízelüzemanyagoknak 16 európai ország 1978 és 2005 közötti jövedékiadó-adatain vizsgáljuk. Az 1995 és 2005 közötti időszakra vonatkozó becslési eredményeink megerősítik, hogy az európai országok szomszédaik adókulcs-változtatásának hatására változtattak saját adókulcsaikon, és hogy a területileg/gazdaságilag kisebb országok kisebb intenzitással reagáltak szomszédaik adóváltoztatásra, mint a nagyobbak. Tanulmányunk ezzel magyarázatot nyújt arra is, hogy miért erősödött fel a tagállamok jövedéki adókulcsainak méret szerinti differenciálódása az elmúlt bő tíz évben, valamint hogy miért nem sikerült az Európai Uniónak a minimumadószintre vonatkozó előírásával előbbre lépnie az egységes adóztatás megvalósításában. / === / The paper assesses spatial competition in diesel taxation among European governments. By adding an extension to the standard model, it is shown that asymmetric competition – small countries undercutting large – implies that small countries respond less strongly to tax changes by their neighbours than large countries do. An estimate is then made of the fiscal reaction functions for national governments, employing a first-difference regression model with a weighting scheme constructed from road-traffic density data at national borders. Data from 16 countries (EU-15 minus Greece plus Norway and Switzerland) between 1978 and 2005 provides evidence that European governments set their diesel tax interdependently, and moreover, that small European countries tend to react less strongly to changes in their competitors' tax rate than large countries do.

An improved framework for dynamic origin-destination (O-D) matrix estimation

This dissertation aims to improve the performance of existing assignment-based dynamic origin-destination (O-D) matrix estimation models to successfully apply Intelligent Transportation Systems (ITS) strategies for the purposes of traffic congestion relief and dynamic traffic assignment (DTA) in transportation network modeling. The methodology framework has two advantages over the existing assignment-based dynamic O-D matrix estimation models. First, it combines an initial O-D estimation model into the estimation process to provide a high confidence level of initial input for the dynamic O-D estimation model, which has the potential to improve the final estimation results and reduce the associated computation time. Second, the proposed methodology framework can automatically convert traffic volume deviation to traffic density deviation in the objective function under congested traffic conditions. Traffic density is a better indicator for traffic demand than traffic volume under congested traffic condition, thus the conversion can contribute to improving the estimation performance. The proposed method indicates a better performance than a typical assignment-based estimation model (Zhou et al., 2003) in several case studies. In the case study for I-95 in Miami-Dade County, Florida, the proposed method produces a good result in seven iterations, with a root mean square percentage error (RMSPE) of 0.010 for traffic volume and a RMSPE of 0.283 for speed. In contrast, Zhou's model requires 50 iterations to obtain a RMSPE of 0.023 for volume and a RMSPE of 0.285 for speed. In the case study for Jacksonville, Florida, the proposed method reaches a convergent solution in 16 iterations with a RMSPE of 0.045 for volume and a RMSPE of 0.110 for speed, while Zhou's model needs 10 iterations to obtain the best solution, with a RMSPE of 0.168 for volume and a RMSPE of 0.179 for speed. The successful application of the proposed methodology framework to real road networks demonstrates its ability to provide results both with satisfactory accuracy and within a reasonable time, thus establishing its potential usefulness to support dynamic traffic assignment modeling, ITS systems, and other strategies.

As rodovias e as aves de rapina nocturnas relação entre a densidade, o habitat e a mortalidade

As estradas e tráfego inerente surgem como a criação antrópica mais conspícua e penetrante na paisagem natural, sendo considerados os principais agentes causadores de fragmentação e destruição de habitats, assim como representam um obstáculo físico sem precedentes, limitando as relações directas entre os indivíduos, por diminuição da frequência de dispersão e aumento da mortalidade por atropelamento, impedindo o fluxo natural de genes e suscitando o aumento de fenómenos de inbreeding e perda de heterozigotia. Todos os impactes deletérios associados às rodovias são claramente perceptíveis em vertebrados, onde as aves de rapinas nocturnas não são excepção. Uma vez que estas rapaces beneficiam das suas bermas e orlas, como locais de poiso, nidificação ou como corredores de dispersão através da paisagem, são frequentemente vítimas de mortalidade por atropelamento em estradas, sendo esta problemática considerada actualmente uma das mais recentes e importantes formas de mortalidade não natural em rapinas nocturnas e vinculada como um dos maiores problemas de conservação que afecta este grupo. Não obstante, esse mútuo efeito de atracção/repulsa das estradas a estas rapaces, as rodovias criam uma barreira específica que limita a dinâmica, comportamento e densidade populacional das espécies residentes, reconhecendo-se que o isolamento daí resultante, pode comprometer a viabilidade populacional a longo prazo, podendo mesmo conduzir a altos riscos de extinção das populações locais devido a efeitos estocásticos. Mediante esta problemática, este trabalho debruçou-se sobre um único objectivo principal: a avaliação do impacte das rodovias e do tráfego, na densidade das aves de rapina nocturnas. Este estudo foi efectuado na região Alentejana, abrangendo uma área de cariz tipicamente mediterrânico, delimitada pelas localidades de Montemor-o-Novo, Arraiolos e Évora, sendo seccionada por 143 quilómetros de estradas, divididas em autoestrada, rodovias com elevada e reduzida densidade de tráfego. A monitorização das rapinas nocturnas foi conduzida em dois anos amostrais (2005 e 2007), tendo sido focalizada sobretudo em duas espécies de Strigiformes, a Coruja­ do-mato Strix aluco e o Mocho-galego Athene noctua, recorrendo ao uso de playbacks com reprodução de vocalizações de indivíduos conspecíficos. Foram usadas 32 variáveis explicativas integradas em três grandes grupos: variáveis de estrada, métricas da paisagem, uso do solo, tendo sido analiticamente testadas, recorrendo à aplicação de Modelos Lineares Generalizados. Os principais resultados obtidos demonstram que as variáveis de estrada, aliadas à densidade de tráfego e ruído inerente à sua circulação, são provavelmente, responsáveis por um comportamento de repulsa das espécies de aves de rapina nocturnas em estudo, apresentando estas densidades mais elevadas longe de áreas antropicamente perturbadas e, portanto, de menor qualidade que se encontram adjacentes às rodovias. Todavia a presença de habitat favorável a estas rapaces é provavelmente o descritor com maior poder estatístico no que concerne à sua distribuição e densidade, sendo os montados densos e a presença de zonas agrícolas de sequeiro, positivamente correlacionadas, respectivamente com a densidade de casais reprodutores de Coruja-do-mato e Mocho-galego. Mediante a observação dos resultados será veemente a aplicação de medidas de mitigação específicas, que fundamentalmente considerem o afastamento dos efectivos populacionais longe das estradas e tráfego, conservando e assegurando as características estruturais, requisitos e qualidade dos habitats, de modo a incrementar e garantir a viabilidade e densidade das populações, fidelizando a territorialidade e permanência destas aves nestas áreas. Adicionalmente deverá investir-se na conectividade das manchas de paisagem fragmentada pelas rodovias, criando opções de conservação estratégicas, em zonas ecologicamente mais sensíveis, que não somente minimizem o efeito de repulsa reconhecido nestas aves, mas também os níveis de mortalidade por atropelamento, tornando os ecossistemas mais funcionais para a sobrevivência destes rapaces. ABSTRACT; Roads and traffic are the most conspicuous and pervasive human creation, being the great responsible for fragmentation and habitats destruction, reducing animal movement through landscape, which implies decrease of gene flow and loss of variability that can fragmented populations, thus reducing their sizes and densities. All deleterious impacts associated with roads are clearly visible in vertebrates, where owls aren't exception, being frequent victims of road mortality, since they can use roadside habitats and edges for hunting, nesting or dispersal corridors through the landscape, being nowadays one of the most recent and important causes of non­natural mortality in owls and has been recognized as one of the largest conservation problems affecting this group. However, the attractive and avoidance effect of roads and his edges on owls creates a barrier effect that limits dynamics, behaviour and breeding density of resident species, recognizing that possible isolation, could compromise populations survival, make them more vulnerable to high risks of local extinction due to stochastic effects. Despite that, several authors suggest that owls use roads to hunt, as marginal habitats, or for navigation corridors through the landscape ln this context, the major aims of this study was to verify if there are negative effects of roads on the density of owls, considering traffic as an influencing factor. This study was conducted in Alentejo, covering a typical Mediterranean area, including three main localities Montemor-o-Novo, Évora and Arraiolos, being sectioned by 143 km of roads, including highway, roads with high traffic density, and the remaining with low traffic density. The owl census was conducted in two sampling years (2005 and 2007) and was focused mainly on Little owl Athene noctua and Tawny Owl Strix aluco species, using the playback technique, with conspecific calls. We used 32 explanatory variables, mainly included in three groups: road variables, landscape metrics and land use, having been analytically tested, with application of Generalised Linear Models. The main results show that noisy roads with high traffic density are probably the most responsible for the avoidance behaviour of owls, under the study area, showing density depression near high anthropogenic disturbed areas adjacent to roads. However, the presence of habitat quality to these birds is probably the descriptor with greater statistical power, considering its distribution and density, with the dense oak woodland and croplands and arable lands, positively correlated, respectively with Tawny owl and Little owl density. ln consequence, the great conservation effort should be done in order to keep breeding populations away from roads and traffic, ensuring the structural features, requirements and quality of its habitats in order to enhance and ensure the viability and density of owl's populations in these areas. ln addition, it is important to invest in connectivity between roadside fragmented patches, creating strategic conservation options, in sensitive areas, which minimize the avoidance effect, recognized in owls, but also road-kill levels, making ecosystems more functional to survival of these top predators.

DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS

By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs. Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView). Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment.

Row spacing and planting density effects on the growth and yield of sugarcane. 2. Strategies for the adoption of controlled traffic.

Controlled traffic (matching wheel and row spacing) is being promoted as a means to manage soil compaction in the Australian sugar industry. However, machinery limitations dictate that wider row spacings than the standard 1.5-m single row will need to be adopted to incorporate controlled traffic and many growers are reluctant to widen row spacing for fear of yield penalties. To address these concerns, contrasting row configuration and planting density combinations were investigated for their effect on cane and sugar yield in large-scale experiments in the Gordonvale, Tully, Ingham, Mackay, and Bingera (near Bundaberg) sugarcane-growing regions of Queensland, Australia. The results showed that sugarcane possesses a capacity to compensate for different row configurations and planting densities through variation in stalk number and individual stalk weight. Row configurations ranging from 1.5-m single rows (the current industry standard) to 1.8-m dual rows (50 cm between duals), 2.1-m dual (80 cm between duals) and triple ( 65 cm between triples) rows, and 2.3-m triple rows (65 cm between triples) produced similar yields. Four rows (50 cm apart) on a 2.1-m configuration (quad rows) produced lower yields largely due to crop lodging, while a 1.8-m single row configuration produced lower yields in the plant crop, probably due to inadequate resource availability (water stress/limited radiation interception). The results suggest that controlled traffic can be adopted in the Australian sugar industry by changing from a 1.5-m single row to 1.8-m dual row configuration without yield penalty. Further, the similar yields obtained with wider row configurations (2 m or greater with multiple rows) in these experiments emphasise the physiological and environmental plasticity that exists in sugarcane. Controlled traffic can be implemented with these wider row configurations (>2 m), although it will be necessary to carry out expensive modifications to the current harvester and haul-out equipment. There were indications from this research that not all cultivars were suited to configurations involving multiple rows. The results suggest that consideration be given to assessing clones with different growth habits under a range of row configurations to find the most suitable plant types for controlled traffic cropping systems.

Modelling port water collision risk using traffic conflicts

Navigational collisions are one of the major safety concerns for many seaports. Despite the extent of work recently done on collision risk analysis in port waters, little is known about the influencing factors of the risk. This paper develops a technique for modeling collision risks in port waterways in order to examine the associations between the risks and the geometric, traffic, and regulatory control characteristics of waterways. A binomial logistic model, which accounts for the correlations in the risks of a particular fairway at different time periods, is derived from traffic conflicts and calibrated for the Singapore port fairways. Estimation results show that the fairways attached to shoreline, traffic intersection and international fairway attribute higher risks, whereas those attached to confined water and local fairway possess lower risks. Higher risks are also found in the fairways featuring higher degree of bend, lower depth of water, higher numbers of cardinal and isolated danger marks, higher density of moving ships and lower operating speed. The risks are also found to be higher for night-time conditions.

A yellow filter improves response times to low-contrast targets and traffic hazards

Purpose Anecdotal evidence suggests that some sunglass users prefer yellow tints for outdoor activities, such as driving, and research has suggested that such tints improve the apparent contrast and brightness of real-world objects. The aim of this study was to establish whether yellow filters resulted in objective improvements in performance for visual tasks relevant to driving. Methods Response times of nine young (age [mean ± SD], 31.4 ± 6.7 years) and nine older (age, [mean ± SD], 74.6 ± 4.8) adults were measured using video presentations of traffic hazards (driving hazard perception task) and a simple low-contrast grating appeared at random peripheral locations on a computer screen. Response times were compared when participants wore a yellow filter (with and without a linear polarizer) versus a neutral density filter (with and without a linear polarizer). All lens combinations were matched to have similar luminance transmittances (˜27%). Results In the driving hazard perception task, the young but not the older participants responded significantly more rapidly to hazards when wearing a yellow filter than with a luminance-matched neutral density filter (mean difference, 450 milliseconds). In the low-contrast grating task, younger participants also responded more quickly for the yellow filter condition but only when combined with a polarizer. Although response times increased with increasing stimulus eccentricity for the low-contrast grating task, for the younger participants, this slowing of response times with increased eccentricity was reduced in the presence of a yellow filter, indicating that perception of more peripheral objects may be improved by this filter combination. Conclusions Yellow filters improve response times for younger adults for visual tasks relevant to driving.