Structural refinement of systems specified in object-z and CSP

This paper is concerned with methods for refinement of specifications written using a combination of Object-Z and CSP. Such a combination has proved to be a suitable vehicle for specifying complex systems which involve state and behaviour, and several proposals exist for integrating these two languages. The basis of the integration in this paper is a semantics of Object-Z classes identical to CSP processes. This allows classes specified in Object-Z to be combined using CSP operators. It has been shown that this semantic model allows state-based refinement relations to be used on the Object-Z components in an integrated Object-Z/CSP specification. However, the current refinement methodology does not allow the structure of a specification to be changed in a refinement, whereas a full methodology would, for example, allow concurrency to be introduced during the development life-cycle. In this paper, we tackle these concerns and discuss refinements of specifications written using Object-Z and CSP where we change the structure of the specification when performing the refinement. In particular, we develop a set of structural simulation rules which allow single components to be refined to more complex specifications involving CSP operators. The soundness of these rules is verified against the common semantic model and they are illustrated via a number of examples.

Solid-State Bipolar Marx Generator with Voltage Droop Compensation

This paper addresses the voltage droop compensation associated with long pulses generated by solid-stated based high-voltage Marx topologies. In particular a novel design scheme for voltage droop compensation in solid-state based bipolar Marx generators, using low-cost circuitry design and control, is described. The compensation consists of adding one auxiliary PWM stage to the existing Marx stages, without changing the modularity and topology of the circuit, which controls the output voltage and a LC filter that smoothes the voltage droop in both the positive and negative output pulses. Simulation results are presented for 5 stages Marx circuit using 1 kV per stage, with 1 kHz repetition rate and 10% duty cycle.

Fine Sand for Use in PC Concrete, MLR-88-6, 1989

In several locations of Iowa, it is becoming more difficult to produce concrete sand consistently at a reasonable cost. Both ASTM and AASHTO have specifications for concrete sands that allow a finer, poorer graded sand than Iowa specifications. The objective of the study was to develop standard mix designs to permit the use of finer graded sand for PC concrete. Three hundred cylinders were made from five sands available in the state. Based on the results of the study, the following are recommended: (1) Create another class of concrete sand by: (a) lowering the current mortar strength ratio from 1.5 to 1.3, (b) raising the allowance for the percent passing one sieve and retained on the next from 40 to 45, and (c) including a provision that 25 to 60 percent passing the number 30 sieve is required for the sand; and (2) Modify the standard paving mixes with and without fly ash for use with the finer sand as follows: (a) 8% more cement and fly ash for B-2 to B-5 mixes, (b) 7% more cement and fly ash for A-2 to A-5 mixes, and (c) 5% more cement and fly ash for C-2 to C-5 mixes and water reduced mixes.

A typology of internet users based on comparative affective states: evidence from eight countries

Purpose - The role of affective states in consumer behaviour is well established. However, no study to date has empirically examined online affective states as a basis for constructing typologies of internet users and for assessing the invariance of clusters across national cultures. Design/methodology/approach - Four focus groups with internet users were carried out to adapt a set of affective states identified from the literature to the online environment. An online survey was then designed to collect data from internet users in four Western and four East Asian countries. Findings - Based on a cluster analysis, six cross-national market segments are identified and labelled "Positive Online Affectivists", "Offline Affectivists", "On/Off-line Negative Affectivists", "Online Affectivists", "Indistinguishable Affectivists", and "Negative Offline Affectivists". The resulting clusters discriminate on the basis of national culture, gender, working status and perceptions towards online brands. Practical implications - Marketers may use this typology to segment internet users in order to predict their perceptions towards online brands. Also, a standardised approach to e-marketing is not recommended on the basis of affective state-based segmentation. Originality/value - This is the first study proposing affective state-based typologies of internet users using comparable samples from four Western and four East Asian countries.

Peace beyond the State? NGOs in Bosnia and Herzegovina

By examining the work of several NGOs in the context of post-conflict reconstruction in Bosnia and Herzegovina (BiH), this essay scrutinizes both the potential and limits of NGO contributions to peace-settlements and long-term stability. While their ability to specialize and reach the grassroots level is of great practical significance, the contribution of NGOs to the reconstruction of war-torn societies is often idealized. NGOs remain severely limited by ad hoc and project-specific funding sources, as well as by the overall policy environment in which they operate. Unless these underlying issues are addressed, NGOs will ultimately become little more than extensions of prevalent multilateral and state-based approaches to post-conflict reconstruction.

Formal verification of ASM designs using the MDG tool

In this paper, we present a formal hardware verification framework linking ASM with MDG. ASM (Abstract State Machine) is a state based language for describing transition systems. MDG (Multiway Decision Graphs) provides symbolic representation of transition systems with support of abstract sorts and functions. We implemented a transformation tool that automatically generates MDG models from ASM specifications, then formal verification techniques provided by the MDG tool, such as model checking or equivalence checking, can be applied on the generated models. We support this work with a case study of an Island Tunnel Controller, which behavior and structure were specified in ASM then using our ASM-MDG tool successfully verified within the MDG tool.

Egalitarian state-transition systems (extended version)

We argue that considering transitions at the same level as states, as first-class citizens, is advantageous in many cases. Namely, the use of atomic propositions on transitions, as well as on states, allows temporal formulas and strategies to be more powerful, general, and meaningful. We define egalitarian structures and logics, and show how they generalize well-known state-based, event-based, and mixed ones. We present translations from egalitarian to non-egalitarian settings that, in particular, allow the model checking of LTLR formulas using Maude’s LTL model checker. We have implemented these translations as a prototype in Maude itself.

Single particle diversity and mixing state measurements

A newly developed framework for quantifying aerosol particle diversity and mixing state based on information-theoretic entropy is applied for the first time to single particle mass spectrometry field data. Single particle mass fraction estimates for black carbon, organic aerosol, ammonium, nitrate and sulfate, derived using single particle mass spectrometer, aerosol mass spectrometer and multi-angle absorption photometer measurements are used to calculate single particle species diversity (Di). The average single particle species diversity (Dα) is then related to the species diversity of the bulk population (Dγ) to derive a mixing state index value (χ) at hourly resolution. The mixing state index is a single parameter representation of how internally/externally mixed a particle population is at a given time. The index describes a continuum, with values of 0 and 100% representing fully external and internal mixing, respectively. This framework was applied to data collected as part of the MEGAPOLI winter campaign in Paris, France, 2010. Di values are low (∼ 2) for fresh traffic and wood-burning particles that contain high mass fractions of black carbon and organic aerosol but low mass fractions of inorganic ions. Conversely, Di values are higher (∼ 4) for aged carbonaceous particles containing similar mass fractions of black carbon, organic aerosol, ammonium, nitrate and sulfate. Aerosol in Paris is estimated to be 59% internally mixed in the size range 150-1067 nm, and mixing state is dependent both upon time of day and air mass origin. Daytime primary emissions associated with vehicular traffic and wood-burning result in low χ values, while enhanced condensation of ammonium nitrate on existing particles at night leads to higher χ values. Advection of particles from continental Europe containing ammonium, nitrate and sulfate leads to increases in Dα, Dγ and χ. The mixing state index represents a useful metric by which to compare and contrast ambient particle mixing state at other locations globally.

Developing an engineering approach for migrating from prescriptive to performance-based specification for concrete

The integral variability of raw materials, lack of awareness and appreciation of the technologies for achieving quality control and lack of appreciation of the micro and macro environmental conditions that the structures will be subjected, makes modern day concreting a challenge. This also makes Designers and Engineers adhere more closely to prescriptive standards developed for relatively less aggressive environments. The data from exposure sites and real structures prove, categorically, that the prescriptive specifications are inadequate for chloride environments. In light of this shortcoming, a more pragmatic approach would be to adopt performance-based specifications which are familiar to industry in the form of specification for mechanical strength. A recently completed RILEM technical committee made significant advances in making such an approach feasible.
Furthering a performance-based specification requires establishment of reliable laboratory and on-site test methods, as well as easy to perform service-life models. This article highlights both laboratory and on-site test methods for chloride diffusivity/electrical resistivity and the relationship between these tests for a range of concretes. Further, a performance-based approach using an on-site diffusivity test is outlined that can provide an easier to apply/adopt practice for Engineers and asset managers for specifying/testing concrete structures.

Definition of Model-based diagnosis problems with Altarica

International audience

Two-State Thermodynamics of Supercooled Water

Water has been called the “most studied and least understood” of all liquids, and upon supercooling its behavior becomes even more anomalous. One particularly fruitful hypothesis posits a liquid-liquid critical point terminating a line of liquid-liquid phase transitions that lies just beyond the reach of experiment. Underlying this hypothesis is the conjecture that there is a competition between two distinct hydrogen-bonding structures of liquid water, one associated with high density and entropy and the other with low density and entropy. The competition between these structures is hypothesized to lead at very low temperatures to a phase transition between a phase rich in the high-density structure and one rich in the low-density structure. Equations of state based on this conjecture have given an excellent account of the thermodynamic properties of supercooled water. In this thesis, I extend that line of research. I treat supercooled aqueous solutions and anomalous behavior of the thermal conductivity of supercooled water. I also address supercooled water at negative pressures, leading to a framework for a coherent understanding of the thermodynamics of water at low temperatures. I supplement analysis of experimental results with data from the TIP4P/2005 model of water, and include an extensive analysis of the thermodynamics of this model.

O efeito posterior duradouro de treinamento (EPDT) das cargas concentradas de força : investigação a partir de ensaio com equipe infanto juvenil e juvenil de voleibol

Universidade Estadual de Campinas. Faculdade de Educação Física

The role of the observed tropical convection in the generation of frost events in the southern cone of South America

Based on previous results obtained from observations and linear wave theory analysis, the hypothesis that large-scale patterns can generate extreme cold events in southeast South America through the propagation of remotely excited Rossby waves was already suggested. This work will confirm these findings and extend their analysis through a series of numerical experiments using a primitive equation model where waves are excited by a thermal forcing situated in positions chosen according to observed convection anomalies over the equatorial region. The basic state used for these experiments is a composite of austral winters with maximum and minimum frequency of occurrence of generalized frosts that can affect a large area known as the Wet Pampas located in the central and eastern part of Argentina. The results suggest that stationary Rossby waves may be one important mechanism linking anomalous tropical convection with the extreme cold events in the Wet Pampas. The combination of tropical convection and a specific basic state can generate the right environment to guide the Rossby waves trigged by the tropical forcing towards South America. Depending on the phase of the waves entering the South American continent, they can favour the advection of anomalous wind at low levels from the south carrying cold and dry air over the whole southern extreme of the continent, producing a generalized frost in the Wet Pampa region. On the other hand, when a basic state based on the composites of minimum frosts is used, an anomalous anticyclone over the southern part of the continent generates a circulation with a south-southeast wind which brings maritime air and therefore humidity over the Wet Pampas region, creating negative temperature anomalies only over the northeastern part of the region. Under these conditions even if frosts occur they would not be generalized, as observed for the other basic state with maximum frequency of occurrence of generalized frosts.

Specification, refinement and verification of concurrent systems - An integration of Object-Z and CSP

This paper presents a method of formally specifying, refining and verifying concurrent systems which uses the object-oriented state-based specification language Object-Z together with the process algebra CSP. Object-Z provides a convenient way of modelling complex data structures needed to define the component processes of such systems, and CSP enables the concise specification of process interactions. The basis of the integration is a semantics of Object-Z classes identical to that of CSP processes. This allows classes specified in Object-Z to he used directly within the CSP part of the specification. In addition to specification, we also discuss refinement and verification in this model. The common semantic basis enables a unified method of refinement to be used, based upon CSP refinement. To enable state-based techniques to be used fur the Object-Z components of a specification we develop state-based refinement relations which are sound and complete with respect to CSP refinement. In addition, a verification method for static and dynamic properties is presented. The method allows us to verify properties of the CSP system specification in terms of its component Object-Z classes by using the laws of the the CSP operators together with the logic for Object-Z.

Dietary influences on survival after ovarian cancer

We evaluated the effects of various food groups and micronutrients in the diet on survival among women who originally participated in a population-based case-control study of ovarian cancer conducted across 3 Australian states between 1990 and 1993. This analysis included 609 women with invasive epithelial ovarian cancer, primarily because there was negligible mortality in women with borderline tumors. The women's usual diet was assessed using a validated food frequency questionnaire. Deaths in the cohort were identified using state-based cancer registries and the Australian National Death Index (NDI). Crude 5-year survival probabilities were estimated using the Kaplan-Meier technique, and adjusted hazard ratios (HRs) and 95% confidence intervals (CIs) were obtained from Cox regression models. After adjusting for important confounding factors, a survival advantage was observed for those who reported higher intake of vegetables in general (HR = 0.75, 95% CI = 0.57-0.99, p-value trend 0.01 for the highest third, compared to the lowest third), and cruciferous vegetables in particular (HR = 0.75, 95% CI = 0.57-0.98, p-value trend 0.03), and among women in the upper third of intake of vitamin E (HR = 0.76, 95% CI = 0.58-1.01, p-value trend 0.04). Inverse associations were also seen with protein (p-value trend 0.09), red meat (p-value trend 0.06) and white meat (p-value trend 0.07), and modest positive trends (maximum 30% excess) with lactose (p-value trend 0.04), calcium and dairy products. Although much remains to be learned about the influence of nutritional factors after a diagnosis of ovarian cancer, our study suggests the possibility that a diet high in vegetable intake may help improve survival. (C) 2003 Wiley-Liss, Inc.