Comunidade zooplanctônica associada a banhado e lagoa interna no Sistema Hidrológico do Taim, costa sul do Rio Grande do Sul, Brasil

O Sistema Hidrológico do Taim, que inclui o Banhado do Taim, insere-se em uma região de áreas alagáveis contínuas caracterizadas por banhados e lagoas de água doce, em uma dinâmica de baixo relevo entre o Oceano Atlântico e a Lagoa Mirim, litoral Sul do Rio Grande do Sul. Este sistema encontra-se associado a uma vasta área de monocultura de arroz irrigado. As alterações antropogênicas ou naturais dos níveis d’água no sistema podem afetar a estrutura das comunidades planctônicas associadas às lagoas e à vegetação macrofítica. O objetivo principal do presente trabalho foi caracterizar a estrutura da comunidade zooplanctônica e verificar sua variação horizontal e temporal num eixo formado por uma área aberta (livre de vegetação) e uma área vegetada por densos estandes de macrófitas, assim como verificar a relação das características limnológicas e climatológicas com estas comunidades de forma a contribuir com elementos para a definição de regras adequadas ao uso dos recursos hídricos desta área. O estudo foi conduzido numa lagoa rasa interna ao Banhado (Lagoa Jacaré), e na porção do Banhado do Taim adjacente à Lagoa. Foi definida uma transecção Banhado-Lagoa composta por três pontos de amostragem (Banhado, Interface e Lagoa). Amostras de água foram coletadas trimestralmente, ao longo de um ano (Agosto/2002 a Junho/2003), para a análise do zooplâncton e das características ambientais. A comunidade zooplanctônica esteve representada por um total de 85 espécies, dentre as quais 39 pertencem aos cladóceros, caracterizando-o como o grupo de maior riqueza específica. O Índice de Constância demonstrou como espécies constantes no eixo Banhado-Lagoa, os rotíferos Lecane leontina e Testudinella sp., e os cladóceros Ceriodaphnia richardi e Chydorus sphaericus. Os copépodos foram o grupo de maior abundância, representada pela dominância dos náuplios e copepoditos, pois os indivíduos adultos freqüentemente ocorreram em número reduzido. Agosto (inverno) foi o período com o maior número de indivíduos, com valores de densidade bastante acentuados em relação aos demais. O Banhado apresentou a maior densidade zooplanctônica, assim como os maiores valores de riqueza e diversidade específica. Este habitat revela-se como uma zona potencial de abrigo e manutenção da fauna zooplanctônica, enfatizando a importância da conservação dos ecossistemas de banhados. As flutuações do nível d’água demonstraram a maior correlação com a variação da comunidade zooplanctônica. A ocorrência de níveis d’água elevados permitiu ampla conexão entre os habitats e grande disponibilidade de nichos, contribuindo para a manutenção de elevada densidade, riqueza e diversidade zooplanctônica nos períodos com tais condições.

“Método de Gauss”: inapropriado até no nome

Tal como ressaltado em de Faro e Guerra (2014), tem sido frequente em nossos tribunais, sentenças judiciais determinando que, relativamente ao caso de amortizações de dívidas com prestações constantes, a popular Tabela Price seja substituída por um sistema que, fundamentado em uma particular aplicação do regime de juros simples, vem sendo cognominado de “Método de Gauss” (cf. Antonick e Assunção, 2006 e Nogueira, 2013). E isso, frize-se, mantendo-se o valor numérico da taxa de juros especificada no contrato de financiamento (usualmente, habitacional). A par de ser totalmente inadequado, como discutido em de Faro (2014c), associar o nome do grande matemático alemão Johann Carl Friedrich Gauss (1777-1855) ao procedimento em questão, sucede que ao mesmo, como a qualquer outro que seja baseado no regime de juros simples, associam-se incontornáveis inconsistências. Como já anteriormente, amplamente evidenciado em de Faro (2013b e 2014a). Tomando a Tabela Price como base de comparação, o propósito do presente trabalho é o de aprofundar a análise das deficiências do que tem sido denominado como “Método de Gauss”. Em particular, dado que as sentenças judiciais costumam não alterar os valores numéricos das taxas contratuais de juros, substituindo tão somente o regime de juros compostos, que está implícito na Tabela Price, pela peculiar variante do regime de juros simples que está subjacente ao que se chama de “Método de Gauss”, buscar-se-á considerar a questão do ponto de vista do financiador.

Sistema de replicação de circuitos integrados digitais baseado em análise comportamental

Nesta dissertação de mestrado é desenvolvido um sistema de replicação de circuitos integrados digitais (combinatórios e sequenciais), por observação do seu normal funcionamento. O sistema desenvolvido carateriza-se pela capacidade de extrair e descrever na linguagem VHDL o comportamento de um circuito integrado digital em funcionamento, utilizando técnicas não invasivas e automatizadas, suportado por um vasto conjunto de algoritmos de aquisição e análise de dados. O sistema desenvolvido assenta em dois módulos principais: um módulo de software que consiste numa plataforma de algoritmos de análise, controlo e gestão do sistema (alojada num computador) e um módulo de aquisição de dados (hardware) que consiste num circuito capaz de realizar as medições necessárias para o funcionamento do sistema, comandado pelo módulo de software. A comunicação entre os dois módulos é efetuada via porta série. Os algoritmos desenvolvidos realizam uma análise da correspondência entre entradas e saídas procurando aplicar uma aproximação a um circuito combinatório se possível, caso contrário são utilizados métodos heurísticos para efetuar uma aproximação a um circuito sequencial através de uma máquina de estados. Entradas ou saídas constantes são previamente identificados e excluídos do processo de análise, para efeitos de simplificação. Os resultados obtidos demonstram que é possível replicar o comportamento observado em circuitos digitais (combinatórios e sequenciais) desde que o número de amostras recolhidas seja adequado. Verifica-se ainda que o método desenvolvido replica a funcionalidade do circuito integrado nas condições onde o circuito está inserido.

Impactos da adoção de sistemas de informação no judiciário: pesquisa com usuários do sistema processual virtual em um juizado especial federal

The Information Technology (IT) is increasing his applicability to business, both private and public companies. It is necessary the adequate use of the new technologies and get cooperation and technology acceptance of the system. People tend to resist to the changes, contributing so that the technology is rejected or even it is not recognized as promoting of the changes. This study is relevant and aim to evaluate the impacts of new technologies, considering their users as fundamental factors in the change process. The survey analyzed the advantages and the barriers of the system use in three federal special judicial of Rio Grande do Norte, with data collected in May of 2007, through the application of questionnaires to thirty eight users of the virtual system CRETA. The users' perception was evaluated, under the optics of five variables: efficiency, image, agility, ease of use and quality. Starting from the obtained results, it was evidenced that the implementation of the system felt accordingly the expected and it reached the objectives intended that were: the velocity and efficiency in the path of the lawsuits, larger productivity, resulting in a better quality of the final work introduced to the citizen and proportionate an improvement in the organizational image of the judiciary power

Desenvolvimento de um sistema de nitretação por plasma em fonte pulsada e sua influencia sobre a nitretação do titânio

The pulsed plasma nitriding is a solution currently used in the metallurgical industry to resolve problems earlier in the processing of parts by using plasma DC voltage. These problems consisted mainly of edge effect and opening arches caused due to non-uniformity of electric fields on uneven surfaces. By varying the pulse width can reduce these effects. However, variations in pulse width can drastically affect the population of the plasma species and hence the final microstructure of the nitrided layer. In literature, little is known about the effect of process parameters on the properties of the plasma species and, consequently, the surface properties. We have developed a system of nitriding with pulsed source with fixed period of 800  pulse width is variable. Examined the variation of these parameters on the properties of nitrided surface when keeping constant temperature, gas composition, flow, pressure and power. It was found that the values of width and pulse repetition time of considerable influence in the intensities of the species present in plasma. Moreover, we observed the existence of the edge effect for some values of pulse widths, as well as changes in surface roughness and hardness

Benefícios e dificuldades na adoção de um sistema de gestão da qualidade no Rio Grande do Norte

Taking competitive advantage or satisfy the client are the reasons why companies have been implementing a Quality Management System (QMS). It brings benefits such as the improvement in the processes, products and services; an enhancement in the image of the company (marketing) and satisfaction of the clients. As a whole, this paper aims to evaluate the results obtained from the implementation of the QMS in the certified companies in the ISO 9001 standard, contained in the database of INMETRO, of the Rio Grande do Norte State (RN). In order to achieve the goals, a bibliographical research about the theme quality management system was made and, subsequently a survey was made with the managers of the certified companies in RN, using the online questionnaire. Out of 27 companies that have the certificate in Rio Grande do Norte, 21 responded the data collection instrument. The data analysis was made through techniques of descriptive and multivariate statistics: cluster analysis. The research instrument used contained 20 questions that address the main theme of this dissertation. Using the cluster analysis, four groupings that possessed similarities concerning the survey answers were found. This analysis allowed us to conclude that the QMS boosts significant improvements in the organizations, such as: quality in the reputation of the company and sales increase. On the other hand, it allowed us to identify as main difficulties: the dissemination of the quality culture, lack of commitment of the whole organization and the resistance of the workers

Um sistema para estimação da vazão de gás de poços produzindo por Plunger Lift para vaso separador de teste em plataformas de petróleo

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV

Desenvolvimento de um ressoador retangular de fenda com múltiplas camadas de substrato e com utilização de material PBG para sistema de comunicação sem fio

In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation. Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas. In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material. This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates. We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration. xviii The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material. The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM). Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern

Sistema para detecção e diagnóstico de falhas em motores elétricos de indução utilizando lógica fuzzy

Induction motors are one of the most important equipment of modern industry. However, in many situations, are subject to inadequate conditions as high temperatures and pressures, load variations and constant vibrations, for example. Such conditions, leaving them more susceptible to failures, either external or internal in nature, unwanted in the industrial process. In this context, predictive maintenance plays an important role, where the detection and diagnosis of faults in a timely manner enables the increase of time of the engine and the possibiity of reducing costs, caused mainly by stopping the production and corrective maintenance the motor itself. In this juncture, this work proposes the design of a system that is able to detect and diagnose faults in induction motors, from the collection of electrical line voltage and current, and also the measurement of engine speed. This information will use as input to a fuzzy inference system based on rules that find and classify a failure from the variation of thess quantities

Estudo das propriedades físico-químicas do biodiesel e suas influências na deterioração dos elastômeros aplicados no sistema de injeção dos motores diesel

The biodiesel use has become important due to its renewable character and to reduce environmental impacts during the fuel burning. Theses benefit will be valid if the fuel shows good performance, chemistry stability and compatibility with engines. Biodiesel is a good fuel to diesel engines due to its lubricity. Then, the aimed of this study was to verify the physicalchemistry properties of biodiesel and their correlations with possible elastomers damage after biodiesel be used as fuel in an injection system. The methodology was divided in three steps: biodiesels synthesis by transesterification of three vegetable oil (soybean, palm and sunflower) and their physical-chemistry characterization (viscosity, oxidative stability, flash point, acidity, humidity and density); pressurized test of compatibility between elastomers (NBR and VITON) and biodiesel, and the last one, analyze of biodiesels lubricity by tribological test ball-plan( HFRR). Also, the effect of mixture of biodiesel and diesel in different concentrations was evaluated. The results showed that VITON showed better compatibility with all biodiesel blends in relation to NBR, however when VITON had contact with sunflower biodiesel and its blends the swelling degree suffer higher influences due to biodiesel humidity. For others biodiesels and theirs blends, this elastomer kept its mechanical properties constant. The better tribological performance was observed for blends with high biodiesel concentration, lower friction coefficient was obtained when palm biodiesel was used. The main mechanisms observed during the HFRR tests were abrasive and oxidative wear

Um estudo dos sistemas de amortizações SAC e francês no ensino médio apoiado na construção de planilhas Eletrônicas

The aim of this work is to provide a text to support interested in the main systems of amortization of the current market: Constant Amortization System (SAC) and French System, also known as Table Price. We will use spreadsheets to facilitate calculations involving handling exponential and decimal. Based on [12], we show that the parcels of the SAC become smaller than the French system after a certain period. Further then that, we did a comparison to show that the total amount paid by SAC is less than the French System

Sistema de Apoio Ósseo para Mecânica Ortodôntica (SAO®): miniplacas para ancoragem ortodôntica. Parte I: tratamento da mordida aberta

Este trabalho descreve uma nova forma de ancoragem por meio de miniplacas denominada SAO®, Sistema de Apoio Ósseo para Mecânica Ortodôntica. Após a descrição do sistema, protocolos de tratamento para mordidas abertas esqueléticas são apresentados. A aplicação de cantiléveres e alças apoiadas diretamente nos tubos do sistema de ancoragem permite que associações de problemas verticais e sagitais (Classe II e III) sejam tratadas de formas distintas. A aplicação de forças leves e constantes e o controle tridimensional das forças aplicadas são o grande diferencial desse novo sistema.

Constantes de Movimento para um Potencial Dependente da Velocidade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantificação da resoluçao do sistema SPECT-CZT através do uso da função de transferência modulada (MTF)

Pós-graduação em Biologia Geral e Aplicada - IBB

Contribuições da conectância de rede e complexidade da dinâmica do sistema de trocas gasosas para a estabilidade na utilização de luz por espécies florestais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)