Imported fire ant : quarantine treatments for nursery stock and other regulated articles.

"Issued 1999"--P. [2] of cover.

Determining inventory service support levels in multi-national companies

Multi-national manufacturing companies are often faced with very difficult decisions regarding where and how to cost effectively manufacture products in a global setting. Clearly, they must utilize efficient and responsive manufacturing strategies to reach low cost solutions, but they must also consider the impact of manufacturing and transportation solutions upon their ability to support sales. One important sales consideration is determining how much work in process, in-transit stock, and finished goods to have on hand to support sales at a desired service level. This paper addresses this important consideration through a comprehensive scenario-based simulation approach, including sensitivity analysis on key study parameters. Results indicate that the inventory needs vary considerably for different manufacturing and delivery methods in ways that may not be obvious when using common evaluative tools.

Differences between theoretical predictions and operational performance in a stock control application

Over the past decade, several experienced Operational Researchers have advanced the view that the theoretical aspects of model building have raced ahead of the ability of people to use them. Consequently, the impact of Operational Research on commercial organisations and the public sector is limited, and many systems fail to achieve their anticipated benefits in full. The primary objective of this study is to examine a complex interactive Stock Control system, and identify the reasons for the differences between the theoretical expectations and the operational performance. The methodology used is to hypothesise all the possible factors which could cause a divergence between theory and practice, and to evaluate numerically the effect each of these factors has on two main control indices - Service Level and Average Stock Value. Both analytical and empirical methods are used, and simulation is employed extensively. The factors are divided into two main categories for analysis - theoretical imperfections in the model, and the usage of the system by Buyers. No evidence could be found in the literature of any previous attempts to place the differences between theory and practice in a system in quantitative perspective nor, more specifically, to study the effects of Buyer/computer interaction in a Stock Control system. The study reveals that, in general, the human factors influencing performance are of a much higher order of magnitude than the theoretical factors, thus providing objective evidence to support the original premise. The most important finding is that, by judicious intervention into an automatic stock control algorithm, it is possible for Buyers to produce results which not only attain but surpass the algorithmic predictions. However, the complexity and behavioural recalcitrance of these systems are such that an innately numerate, enquiring type of Buyer needs to be inducted to realise the performance potential of the overall man/computer system.

Design of a stock control methodology for use within an oil blending company

The thesis deals with the background, development and description of a mathematical stock control methodology for use within an oil and chemical blending company, where demand and replenishment lead-times are generally non-stationary. The stock control model proper relies on, as input, adaptive forecasts of demand determined for an economical forecast/replenishment period precalculated on an individual stock-item basis. The control procedure is principally that of the continuous review, reorder level type, where the reorder level and reorder quantity 'float', that is, each changes in accordance with changes in demand. Two versions of the Methodology are presented; a cost minimisation version and a service level version. Realising the importance of demand forecasts, four recognised variations of the Trigg and Leach adaptive forecasting routine are examined. A fifth variation, developed, is proposed as part of the stock control methodology. The results of testing the cost minimisation version of the Methodology with historical data, by means of a computerised simulation, are presented together with a description of the simulation used. The performance of the Methodology is in addition compared favourably to a rule-of-thumb approach considered by the Company as an interim solution for reducing stack levels. The contribution of the work to the field of scientific stock control is felt to be significant for the following reasons:- (I) The Methodology is designed specifically for use with non-stationary demand and for this reason alone appears to be unique. (2) The Methodology is unique in its approach and the cost-minimisation version is shown to work successfully with the demand data presented. (3) The Methodology and the thesis as a whole fill an important gap between complex mathematical stock control theory and practical application. A brief description of a computerised order processing/stock monitoring system, designed and implemented as a pre-requisite for the Methodology's practical operation, is presented as an appendix.

An exploratory study of ICT usage in small logistics service providers

Information and communication technology (ICT) developments have strongly affected supply chain management (SCM) in recent years. ICT has had a great impact on all supply chain processes including planning, purchasing, production management, stock management, physical distribution and related integration management. Technology has become an important dimension of third party logistics (3PL) service supply as competitive advantage increasingly depends on the ability to create value for customers through the effective application of ICT. Within this process, while large 3PLs are gaining substantial benefits from technology usage and implementation, the magnitude of changes spurred by ICT dissemination in small logistics service providers remains unclear. This is reflected by the existing gap in literature where the role and competitive developing processes of small 3PLs are seriously underestimated. This gives rise to the need to develop research and investigation in this particular area. The objective of this paper is to narrow the knowledge gap in the field of ICT adoption in small 3PLs through an empirical investigation. It presents the results of a survey on a sample of small Italian 3PLs.

Intellectual property activity by service sector and manufacturing firms in the United Kingdom, 1996-2000

This paper provides evidence from a newly constructed database of UK firms about the extent of their intellectual property acquisition activities over five years. We focus on service sector firms, which have not previously been studied, with comparisons for firms in manufacturing and other sectors, such as agriculture. The measures of IP include both trade marks, which are most important in services, and patents, which are predominantly sought by manufacturing firms. The analysis includes patents and trade marks applied for via both the UK and European routes. While IP assets sought through the UK Patent Office remained strong, more services firms were seeking European Community trade marks and more manufacturing firms were seeking patents via European Patent Office through time. Firm characteristics that are positively correlated with IP activity include larger firm size, stock market listed status and high product market diversification.

Frontline employees’ innovative service behavior as key to customer loyalty:insights into FLEs’ resource gain spiral

Many service firms require frontline service employees (FLEs) to follow routines and standardized operating procedures during the service encounter, to deliver consistently high service standards. However, to create superior, pleasurable experiences for customers, featuring both helpful services and novel approaches to meeting their needs, firms in various sectors also have begun to encourage FLEs to engage in more innovative service behaviors. This study therefore investigates a new and complementary route to customer loyalty, beyond the conventional service-profit chain, that moves through FLEs' innovative service behavior. Drawing on conservation of resources (COR) theory, this study introduces a resource gain spiral at the service encounter, which runs from FLEs' emotional job engagement to innovative service behavior, and then leads to customer delight and finally customer loyalty. In accordance with COR theory, the proposed model also includes factors that might hinder (customer aggression, underemployment) or foster (colleague support, supervisor support) FLEs' resource gain spiral. A multilevel analysis of a large-scale, dyadic data set that contains responses from both FLEs and customers in multiple industries strongly supports the proposed resource gain spiral as a complementary route to customer loyalty. The positive emotional job engagement-innovative service behavior relationship is undermined by customer aggression and underemployment, as hypothesized. Surprisingly though, and contrary to the hypotheses, colleague and supervisor support do not seem to foster FLEs' resource gain spiral. Instead, colleague support weakens the engagement-innovative service behavior relationship, and supervisor support does not affect it. These results indicate that if FLEs can solicit resources from other sources, they may not need to invest as many of their individual resources. In particular, colleague support even appears to serve as a substitute for FLEs' individual resource investments in the resource gain spiral.

[principles Of Universality, Comprehensiveness And Equity In A Hearing Health Care Service].

This article analyzed whether the practices of hearing health care were consistent with the principles of universality, comprehensiveness and equity from the standpoint of professionals. It involved qualitative research conducted at a Medium Complexity Hearing Health Care Center. A social worker, three speech therapists, a physician and a psychologist constituted the study subjects. Interviews were conducted as well as observation registered in a field diary. The thematic analysis technique was used in the analysis of the material. The analysis of interviews resulted in the construction of the following themes: Universality and access to hearing health, Comprehensive Hearing Health Care and Hearing Health and Equity. The study identified issues that interfere with the quality of service and run counter to the principles of Brazilian Unified Health System. The conclusion reached was that a relatively simple investment in training and professional qualification can bring about significant changes in order to promote a more universal, comprehensive and equitable health service.

A retrospective study of Traumatic Dental Injuries in a Brazilian dental urgency service

Epidemiologic aspects of traumatic dental injuries (TDI) were evaluated in the permanent dentition in a sample of 847 patients treated at the Dental Urgency Service of the Dental School of the Federal University of Goiás, Brazil, between May 2000 and May 2008. The statistical treatment analyzed data from frequency distribution and chi-square test. The level of significance was set at 5% for all analyses. The results showed a higher incident among males (610; 72.01%) with mean age of 6-10 year-old. Uncomplicated crown fracture (without pulp exposure) (502; 26.95%), avulsion (341; 18.30%) and complicated crown fracture (with pulp exposure) (330; 17.71%) were the most prevalent TDI. The prevalence of trauma throughout the years showed proportionality, being observed a larger number of cases between July and September (249; 29.39%). The most affected teeth were the maxillary central incisors (65.65%), followed by the maxillary left lateral incisors (19.67%). In 311 participants (18.25%), only one tooth was involved, while in most patients (536; 81.75%), TDI occurred in more than one tooth. Significant proportion (82.27%) of traumatized teeth presented completely formed root apex. The main etiologic factors involved in TDI were falls (51.71%), traffic accidents (22.90%) and violence (5.67%). Based on the obtained data, it may be concluded that accurate policies of TDI prevention must be established, capable of stimulating the exposure of appropriate protocols for management of these lesions. The prevalence of TDI in Goiânia subpopulation is compared to the prevalence reported in epidemiological studies in others populations.

Merluccius hubbsi (Teleostei: Merlucciidae): stock identification based on reproductive biology in the south-southeast brazilian region

The Argentine hake, Merluccius hubbsi, a demersal-pelagic species found from Rio de Janeiro, Brazil to the Tierra del Fuego, Argentina, has become an important target of the Brazilian bottom-trawler fleet since 2001. Earlier studies focusing on the species have suggested that more than one stock might occur off the Brazilian coast, in accordance with environmental features. In order to evaluate this hypothesis, fish were collected from four different areas in the Brazilian waters in which the hake is distributed, during the summers and winters of 1996-2001 and 2004, the females being used to analyze and compare spatial-temporal variations in ovarian maturation. Gonad indexes were also applied for the same purpose. Results indicate a north-south spawning gradient occurring as from summer at around 21°S to winter near 34°S, leading to the identification of two distinct stocks: one located between 21°S and 29°S (Southeastern stock) and the other between 29°S and 34°S (Southern stock), this latter shared with Uruguay and Argentina. Brazilian stocks present clear signs of overexploitation, the situation calling for an urgent solution.

The Process of Simulation Authoring/Creation by Chemistry Teachers: A Service Learning Experience

Two case studies are presented to describe the process of public school teachers authoring and creating chemistry simulations. They are part of the Virtual Didactic Laboratory for Chemistry, a project developed by the School of the Future of the University of Sao Paulo. the documental analysis of the material produced by two groups of teachers reflects different selection process for both themes and problem-situations when creating simulations. The study demonstrates the potential for chemistry learning with an approach that takes students' everyday lives into account and is based on collaborative work among teachers and researches. Also, from the teachers' perspectives, the possibilities of interaction that a simulation offers for classroom activities are considered.

MODELING OF AN INFORMATION SYSTEM FOR WINE TRACEABILITY BASED ON A SERVICE ORIENTED ARCHITECTURE

The purpose is to present a scientific research that led to the modeling of an information system which aimed at the maintenance of traceability data in the Brazilian wine industry, according to the principles of a service-oriented architecture (SOA). Since 2005, traceability data maintenance is an obligation for all producers that intend to export to any European Union country. Also, final customers, including the Brazilian ones, have been asking for information about food products. A solution that collectively contemplated the industry was sought in order to permit that producer consortiums of associations could share the costs and benefits of such a solution. Following an extensive bibliographic review, a series of interviews conducted with Brazilian researchers and wine producers in Bento Goncalves - RS, Brazil, elucidated many aspects associated with the wine production process. Information technology issues related to the theme were also researched. The software was modeled with the Unified Modeling Language (UML) and uses web services for data exchange. A model for the wine production process was also proposed. A functional prototype showed that the adopted model is able to fulfill the demands of wine producers. The good results obtained lead us to consider the use of this model in other domains.

Application of the essential work of fracture method in ranking the performance in service of high-density polyethylene resins employed in pressure pipes

High-density polyethylene resins have increasingly been used in the production of pipes for water- and gas-pressurized distribution systems and are expected to remain in service for several years, but they eventually fail prematurely by creep fracture. Usual standard methods used to rank resins in terms of their resistance to fracture are expensive and non-practical for quality control purposes, justifying the search for alternative methods. Essential work of fracture (EWF) method provides a relatively simple procedure to characterize the fracture behavior of ductile polymers, such as polyethylene resins. In the present work, six resins were analyzed using the EWF methodology. The results show that the plastic work dissipation factor, beta w(p), is the most reliable parameter to evaluate the performance. Attention must be given to specimen preparation that might result in excessive dispersion in the results, especially for the essential work of fracture w(e).

Expo 1988 Information Service Centre, Brisbane

View to service centre during Expo 1988.

Perceptions of mental health service delivery among staff and Indigenous consumers: it's still about communication

Objective: A needs analysis was undertaken to determine the quality and effectiveness of mental health services to Indigenous consumers within a health district of Southern Queensland. The study focussed on identifying gaps in the service provision for Indigenous consumers. Tools and methodologies were developed to achieve this. Method: Data were collected through the distribution of questionnaires to the target populations: district health service staff and Indigenous consumers. Questionnaires were developed through consultation with the community and the Steering Committee in order to achieve culturally appropriate wording. Of prime importance was the adaptation of questionnaire language so it would be fully understood by Indigenous consumers. Both questionnaires were designed to provide a balanced perspective of current mental health service needs for Indigenous people within the mental health service. Results: Results suggest that existing mental health services do not adequately meet the needs of Indigenous people. Conclusions: Recommendations arising from this study indicate a need for better communication and genuine partnerships between the mental health service and Indigenous people that reflect respect of cultural heritage and recognises the importance of including Indigenous people in the design and management of mental health services. Attention to the recommendations from this study will help ensure a culturally appropriate and effective mental health service for Indigenous consumers.