(E)-2-Nonenal determination in brazilian beers using headspace solid-phase microextraction and gas chromatographic coupled mass spectrometry (HS-SPME-GC-MS)

(E)-2-nonenal is considered an important off-flavor of beer, related to the flavor of beer staling. In this study, a new method for determination of (E)-2-nonenal in beer using headspace solid-phase microextraction and gas chromatographic coupled mass spectrometry (HS-SPME-GC-MS) was developed and applied in Brazilian beer samples. The extractions were carried out in CAR-PDMS (carboxen-polydimethylsiloxane) fiber and the best results were found with 15 minutes of equilibrium and 90 minutes of extraction at 50 °C. The method was linear in the range from 0.02 to 4.0 μg.L-1 with correlation coefficient of 0.9994. The limits of detection and quantification were 0.01 and 0.02 μg.L-1, respectively. 96.5% of recovery and 4% precision (RSD) were obtained in the fortification of beer samples with 2.0 μg.L-1 of (E)-2-nonenal. The developed method proved to be simple, efficient and highly sensitive to the determination of this analyte being easily applied in the quality control of the brewery. (E)-2-nonenal was found in all beer samples analyzed with levels between 0.17 and 0.42 μg.L-1.

Optimization of the HS-SPME-GC/MS technique for determining volatile compounds in red wines made from Isabel grapes (Vitis labrusca)

Abstract Brazilian wine production is characterized by Vitis labrusca grape varieties, especially the economically important Isabel cultivar, with over 80% of its production destined for table wine production. The objective of this study was to optimize and validate the conditions for extracting volatile compounds from wine with the solid-phase microextraction technique, using the response surface method. Based on the response surface analysis, it can be concluded that the central point values maximize the process of extracting volatile compounds from wine, i.e., an equilibrium time of 15 minutes, an extraction time of 35 minutes, and an extraction temperature of 30 °C. Esters were the most numerous compounds found under these extraction conditions, indicating that wines made from Isabel cultivar grapes are characterized by compounds that confer a fruity aroma; this finding corroborates the scientific literature.

Optimization of the HS-SPME-GC/MS technique for the analysis of volatile compounds in caprine Coalho cheese using response surface methodology

Abstract Caprine Coalho cheese presents great potential for a typical protected designation of origin, considering that this traditional Brazilian cheese presents a slightly salty and acid flavor, combined with a unique texture. This study optimized the HS-SPME-GC-MS methodology for volatile analysis of Coalho cheese, which can be used as a tool to help in the identification of the distinctive aroma profile of this cheese. The conditions of equilibrium time, extraction temperature and time were optimized using the statistical tool factorial experimental design 23, and applying the desirability function. After the evaluation, it was concluded that the optimum extraction conditions comprised equilibrium and extraction time of 20 and 40 minutes, respectively; and ideal extraction temperature of 45 °C. The optimum extraction of volatile compounds in goat Coalho cheese captured 32 volatile compounds: 5 alcohols, 5 esters, 3 ketones, 6 acids, 3 aldehydes, 3 terpenes, and 7 hydrocarbons.

A GC-FID Method to Determine Styrene in Polystyrene Glasses

The styrene levels of polystyrene (PS) glasses from the most consumed brands of disposable glasses intended for water and coffee in Brazil were determined. A GC-FID method was developed and validated, showing good precision and accuracy. The method was successfully used to determine styrene in 11 PS glass brands. The styrene levels ranged from 1.68 to 43.69 mg/100 g glass, depending on the kind of polymer, thickness, and glass brand. It could be used to control the content of styrene in the polymer. The migration of styrene from the glasses into water and 20 % ethanol was not detected.

Analysis of Steroids using Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry-Mass Spectrometry (SPME-GC-MS-MS)

Direct immersion SPME-GC-MS-MS was used for the analysis of steroids in water at part-per-trillion(ppt) and lower concentrations. The method was validated and extended to real sample analysis. The method were linear from 0.01 to 5 ng/ml with precision less than 10% relative standard deviation for a steroid mixture at 1 ng/ml. Limit of quantitation and limit of detection was found to be 200- 1200 pg/L and 30-200 pg/L respectively and recoveries ranged from 88-103 %. To understand the extraction efficiency of the fiber, a depletion study was performed. The fiber/ sample partition coefficients for the steroids were determined to be 1.0 x 104 to 1.5 x 104 . The extraction was performed without derivatization or the use of an internal standard. SPMEGC-MS-MS effectively demonstrated ultra-trace level detection of steroids in water.

Determination of polybrominated diphenyl ethers in water samples from Mendoza River Basin by HS-SPME-GC-MS/MS

Polybrominated diphenyl ethers (PBDEs) are considered persistent organic pollutants because of their ubiquity, persistence and bioaccumulation. Its harmful effects on human health and the environment, has led to its inclusion of the Stockholm Convention. Little information is found about PBDEs in abiotic systems of the South America in open literature. This paper reports the presence and concentration level of four PBDEs congeners in Mendoza River, Argentina. The selected PBDEs were: 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentabromodiphenyl ether (BDE-99), 2,2',4,4',6-pentabromodiphenyl ether (BDE- 100) and 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE-153). The analytical methodology used was head space-solid phase micro extraction combined with gas chromatographymass spectrometry (HS-SPME-GC-MS/MS). Several variables, including pH, salting out, extraction technique type and extraction time were studied and optimized over the relative response the target analytes. The precision of HS-SPME-GC-MS/MS evaluated over five replicate, leading RSDs values <13%, detection limits (S/N=3) ranging from 0.03 pg ml-1 to 0.12 pg ml-1 and the calibration graph was linear with r2=0.9959. BDE-47 and BDE-100 were the predominant congeners found in the analyzed samples. Their concentrations ranged from not detected to 1.9 pg ml-1 and to 0.5 pg ml-1, respectively.

SPME-GC technika alkalmazása élelmiszer-technológiai kutatásokban

Az illékony komponensek vizsgálata számos tudományterületen fontos feladat. Ez különösen igaz az élelmiszertudomány esetében, ahol sok esetben ezeknek a vegyületeknek nemcsak mint kémiai markerekként van jelentősége, hanem részt vesznek az illat, mint érzékszervi tulajdonság kialakításában is. Az illékony vegyületek gázkromatográfiás vizsgálata hosszú múltra tekint vissza, ugyanakkor a rutinszerűen használható, oldószermentes, bonyolult mintaelőkészítést nem igénylő gázkromatográfiás technika csak az utóbbi néhány évtizedben vált elérhetővé. Az SPME (szilárd fázisú mikroextrakció) technikát az 1980-a évek végén mutatták be, mára azonban a gázkromatográfiás gyakorlatban alkalmazott, alternatív mintaelőkészítési móddá vált. A technika kellően érzékeny, jó reprodukálhatóságot biztosító, költséghatékony és egy lépésben valósítja meg az extrakciót, a koncentrálást és mintainjektálást. Az SPME technika sikeres alkalmazására mind több példa mutatkozik. Közleményünkben a Budapesti Corvinus Egyetem Élelmiszertudományi Kar Hűtő- és Állatitermék Technológiai Tanszékén végzett olyan kutatások eredményeiből mutatunk be néhány példát, ahol az élelmiszer-előállítási, -feldolgozási technológiák fejlesztésében az élelmiszerek illékony komponensei vizsgálatának nagy jelentősége van.

Determination of endocrine disruptor pesticides in river waters by SPME-GC-MS

FCT - PEst-C/EGE/LA0006/2011

Determinação simultânea de Glicerol livre e total, MONO-, DI e triglicerídeos em biodiesel etílico de girassol, mamona e da mistura de sebo e soja empregando GC-FID

O biodiesel produzido para ser comercializado no Brasil deve estar de acordo aos padrões de qualidade estabelecidos pela resolução de 4 de fevereiro de 2010 da Agência Nacional do Petróleo, Gás Natural e do Biocombustível (ANP, 04/2010). Neste trabalho, foi estudada a aplicação dos métodos ASTM D 6584 e EN 14105 para o biodiesel de mamona e biodiesel oriundo de rota etílica. Ambos os métodos empregam GC (Cromatografia Gasosa, do inglês Gas Chromatography) com FID (Detecção por Ionização em Chama, do inglês Flame Ionization Detection) e reação de sililação com N-metil-N-(trimetilsilil)trifluoracetamida (MSTFA). Os compostos foram identificados para quantificação pelos tempos de retenção, para os diglicerídeos e triglicerídeos foram utilizadas bandas de tempo de retenção. Os parâmetros de validação considerados foram: curva analítica, linearidade, sensibilidade, robustez, precisão e exatidão. Os métodos ASTM D 6584 e EN 14105 apresentaram sensibilidade semelhante para todos os compostos. Foram escolhidas as condições cromatográficas estabelecidas pelo método ASTM D 6584 por ser mais rápido que o EN14105 e ter sensibilidade semelhante. O método apresentou boa linearidade com todas as curvas analíticas com r maiores que 0,999. A reação de sililação com MSTFA foi otimizada para o biodiesel etílico de mamona em virtude da sua composição química. Um volume de 500 μL de MSTFA foi escolhido para realização dos ensaios de exatidão e precisão. Os valores de exatidão ficaram entre 67 e 145,9% com valores de precisão menores que 11%. Foi avaliada a ocorrência de efeito matriz para biodiesel etílico de mamona, sendo que esse efeito foi considerado baixo para glicerol, monooleína e dioleína e médio para trioleína. Mesmo havendo efeito de matriz o preparo das curvas analíticas em solvente conforme sugerido pelos métodos de referência foi mantido. O método foi robusto frente às variações da composição química da matriz. Na aplicação do método, esse se mostrou adequado para amostras de biodiesel etílico de mamona, de girassol e da mistura de sebo e soja.

An innovative rapid method for analysis of 10 organophosphorus pesticide residues in wheat by HS-SPME-GC-FPD/MSD

"Assisted factorial experimental design" per l'ottimizzazione della determinazione di benzene ematico in gc-fid

La quantificazione del benzene ematico è un tema di grande interesse nell'ambito della tossicologia occupazionale. La determinazione dell'analita, estratto nello spazio di testa di un vial, è eseguita mediante l'utilizzo di un gascromatografo con rilevatore a ionizzazione di fiamma (GC-FID). Si è cercato di ottimizzare il processo di estrazione del benzene dal sangue allo spazio di testa ed il successivo trasferimento dell'analita nella colonna cromatografica, mediante l'applicazione di un disegno sperimentale fattoriale a tre fattori e due livelli (DoE). I fattori individuati per impostare il piano sperimentale sono stati: variazione della temperatura di incubazione (A) del vial contenente il campione di sangue, pH del campione (B), modulato mediante aggiunta di una soluzione di H2SO4 e forza ionica (C), regolata mediante una soluzione acquosa di NaCl. I livelli scelti per ciascuna variabile sono stati: per A 40 e 60 °C; per B pH naturale del campione e pH a seguito dell'aggiunta di 1 mL di H2SO4 1.8 M; per C FI naturale del campione e FI dovuta all'aggiunta di una soluzione acquosa di sodio cloruro (5 g/L). Dall'analisi dei risultati forniti dal DoE, si è osservato che A, B e C hanno effetti tra loro contrastanti, per questo motivo non sembra essere vantaggioso combinare variabili differenti. In compenso, sia l'aumento di temperatura che l'aggiunta di acido solforico portano a significativi miglioramenti nell'estrazione di benzene dal sangue. Tra i tre trattamenti risulta essere B quello più efficace, motivo per il quale si ritiene che l'aggiunta di una soluzione acquosa di H2SO4 al campione di sangue porti ad una maggiore sensibilità e risoluzione strumentale. Sicuramente la sensibilità del metodo elaborato non può essere paragonata alle tradizionali determinazioni con spettrometro di massa, ma si ritiene possa essere sufficientemente soddisfacente per valutare l'esposizione a benzene dei lavoratori a rischio e come analisi di screening rapida ed economica.

Characterization of the volatile fraction emitted by phloems of four pinus species by solid-phase microextraction and gas chromatography–mass spectrometry

Pine forests constitute some of the most important renewable resources supplying timber, paper and chemical industries, among other functions. Characterization of the volatiles emitted by different Pinus species has proven to be an important tool to decode the process of host tree selection by herbivore insects, some of which cause serious economic damage to pines. Variations in the relative composition of the bouquet of semiochemicals are responsible for the outcome of different biological processes, such as mate finding, egg-laying site recognition and host selection. The volatiles present in phloem samples of four pine species, P. halepensis, P. sylvestris, P. pinaster and P. pinea, were identified and characterized with the aim of finding possible host-plant attractants for native pests, such as the bark beetle Tomicus piniperda. The volatile compounds emitted by phloem samples of pines were extracted by headspace solid-phase micro extraction, using a 2 cm 50/30 mm divinylbenzene/carboxen/polydimethylsiloxane table flex solid-phase microextraction fiber and its contents analyzed by high-resolution gas chromatography, using flame ionization and a non polar and chiral column phases. The components of the volatile fraction emitted by the phloem samples were identified by mass spectrometry using time-of-flight and quadrupole mass analyzers. The estimated relative composition was used to perform a discriminant analysis among pine species, by means of cluster and principal component analysis. It can be concluded that it is possible to discriminate pine species based on the monoterpenes emissions of phloem samples.

Determinação de metil-etil-cetona em amostras de urina com amostragem por micro extração em fase sólida (MEFS) em headspace associada à cromatografia gasosa com detector de ionização de chama (CG-DIC)

Methyl ethyl ketone (MEK) is a solvent commonly used in chemical, paint and shoe industry. The aim of this study was to develop and validate a method for urinary quantification of MEK, employing headspace solid phase micro extraction sampling (SPME) coupled to gas chromatography with flame ionization detection (GC-FID). The calibration curve (y=4.6851x-0.0011) presented good linearity with r²=0.9993. Accuracy (94-109%), intra-assay precision (4.07-5.91%) and inter-assay precision (3.03-5.62%) were acceptable. The quantification limit was 0.19 mg/L. This low cost method can be used routinely in the biological monitoring of occupational exposure to MEK, according to the requirements of the Brazilian legislation.

Determinação de etanol e voláteis relacionados em sangue e fluido oral por microextração em fase sólida em headspace associada à cromatografia gasosa com detector de ionização em chama

The aim of this study was to validate a method for the determination of acethaldehyde, methanol, ethanol, acetone and isopropanol employing solid-phase microextraction associated to gas chromatography with flame ionization detection. The operational conditions of SPME were optimized by response surface analysis. The calibration curves for all compounds were linear with r² > 0.9973. Accuracy (89.1-109.0%), intra-assay precision (1.8-8.5%) and inter-assay precision (2.2-8.2%) were acceptable. The quantification limit was 50 µg/mL. The method was applied to the meaurement of ethanol in blood and oral fluid of a group of volunteers. Oral fluid ethanol concentrations were not directly correlated with blood concentrations.

Estudos de biodegradação de óleo diesel por consórcio microbiano coletado em Porto Velho - RO, amazônia

The goal of this research was to evaluate the biodegradation of diesel by a microbial consortium collected in a region close to distributors of fuel. The experiments were monitored by SPME-GC-FID and SPME-GC-MS. The consortium showed a high potential for production of biosurfactants, presenting an emulsification index of 53%. The consortium degraded completely n-alkanes, while dimethylnaphtalene, hepthyl-cyclohexane and 2,6,10-trimethyl-undecane were partially degraded and pristane was not degraded. From this consortium five strains were isolated and identified as Acinetobacter baumannii. Based on this initial investigation this consortium appears to be effective for bioremediation in Porto Velho - RO region.