Thidiazuron effects on shoot growth, return bloom, fruit set and nutrition of apples

Apple (Malus domestica Borkh.) trees, cultivars Gala and Fuji, were sprayed at full bloom with thidiazuron (TDZ) at doses of 0, 5, 10, or 20 g ha-1 of a.i. in order to evaluate its effects on plant growth and development, return bloom, fruit set, nutrition, and fruit yield. Fruit set increased with TDZ dose in 'Gala' but not in 'Fuji'. TDZ did not affect fruit yield in any cultivar. In 'Gala', the return bloom was reduced in about 50% at TDZ doses of 10 or 20 g ha-1. TDZ increased shoot growth in both cultivars. In leaves, TDZ decreased the concentration of Ca and Mg in 'Gala' and of Mg in 'Fuji', but did not affect the chlorophyll content, leaf area, length, width, and dry mass per cm² regardless of cultivar. In fruits, the effect of TDZ varied according to the portion evaluated. Highest doses of TDZ decreased the concentration of Ca and K in 'Gala' and of K in 'Fuji' in the entire fruits (flesh + skin); in the skin, highest doses of TDZ reduced the levels of N, Ca, and Mg in both cultivars, in addition to the level of K in 'Fuji'.

Growth rate and wood properties of Norway spruce cutting clones on different sites

[Abstract]

Shoot growth of Merlot and Cabernet Sauvignon grapevine varieties

The objective of this work was to evaluate shoot growth of the grapevine varieties Merlot and Cabernet Sauvignon, during 2006/2007, and Cabernet Sauvignon, during 2008/2009, in São Joaquim, SC, Brazil. The experiment was carried out in a commercial vineyard trained on a vertical trellis system. The shoots of the central part of the plants were selected, and the lengths from the base to the apex of 20 shoots per cultivar were evaluated. In 2006/2007, monitoring began at pruning, on 9/15/2006, and ended on 2/6/2007, totalizing 144 days of evaluation. During the 2008/2009 cycle, phenology and shoot growth for 'Cabernet Sauvignon' were assessed from grape development (1/13/2009) (pea-sized grapes) until shoot vegetative growth had ceased. Budburst occurred in the second half of September, and shoot-growth cessation occurred during ripening. Higher growth rates (about 4 cm per day) were observed in pre- and post-flowering, followed by reduction due to the competition for photosynthates for the formation of flowers and bunches. Temperature and photoperiod induce grapevine shoots to cease growth in the highland regions of Santa Catarina State, Brazil.

Selection response of growth rate in rabbits for meat production

Genetic and environmental trends in 2 lines of rabbit (B and R) selected on individual weight gain (WG) from weaning (4 wk) to slaughter (11 wk) were estimated using mixed model methodology. Line B was derived from the California breed and line R was a synthetic of stock of different origin. The data were collected from a single herd and comprised 7 718 individuals in line B and 9 391 in line R, the lines having 12 and 9 generations of selection respectively. Realized responses in the 2 lines were 2.7% and 2.2% of the initial mean per year respectively and showed that selection on WG was effective but was less than expected. Selection on slaughter weight (SW) and effects of selection on other economic traits are discussed. It is concluded that selection on either WG or SW is a simple method for improving growth rate in rabbit sire line stocks.

RELATIONSHIP BETWEEN CLIMATE VARIABLES, TRUNK GROWTH RATE AND WOOD DENSITY OF Eucalyptus grandis W. Mill ex Maiden TREES

ABSTRACT Climatic conditions stimulates the cambial activity of plants, and cause significant changes in trunk diameter growth and wood characteristics. The objective of this study was to evaluate the influence of climate variables in the diameter growth rate of the stem and the wood density of Eucalyptus grandis trees in different classes of the basal area. A total of 25 Eucalyptus trees at 22 months of age were selected according to the basal area distribution. Dendrometer bands were installed at the height of 1.30 meters (DBH) to monitor the diameter growth every 14 days, for 26 months. After measuring growth, the trees were felled and wood discs were removed at the DBH level to determine the radial density profile through x-ray microdensitometry and then re-scale the average values every 14 days. Climatic variables for the monitoring period were obtained and grouped every 14 days. The effect of the climate variables was determined by maximum and minimum growth periods in assessing trunk growth. These growth periods were related with precipitation, average temperature and relative air humidity. The re-scaled wood density values, calculated using the radial growth of the tree trunks measured accurately with steel dendrometers, enabled the determination of the relationship of small changes in wood density and the effect of the climatic variations and growth rate of eucalyptus tree trunks. A high sensitivity of the wood density to variation in precipitation levels was found.

Aqueous tissue extracts of Conyza canadensis inhibit the germination and shoot growth of three native herbs with no autotoxic effects

Conyza canadensis is a widespread weed species forming dense populations in most regions of China. Petri dish bioassays with aqueous extracts of the aboveground parts and roots of C. canadensis at three concentrations (0.05, 0.1, and 0.2 g mL-1) were undertaken to investigate the autotoxic effects of C. canadensis, and the possible effects on three dominant native weed species, Plantago asiatica, Digitaria sanguinalis and Youngia japonica. The results showed that seed germination and the shoot length of three native species were significantly inhibited by aqueous extracts of C. canadensis at almost all concentrations that generally increased with increasing extract concentration. However, the seed germination and shoot length of C. canadensis itself was not significantly affected by the same extracts at all concentrations. These results suggested that the potential allelopathic compounds produced by the tissue of C. canadensis may contribute to its invasive success in invading southern China.

Inverse Metabolic Engineering of Synechocystis PCC 6803 for Improved Growth Rate and Poly-3-hydroxybutyrate Production

Synechocystis PCC 6803 is a photosynthetic bacterium that has the potential to make bioproducts from carbon dioxide and light. Biochemical production from photosynthetic organisms is attractive because it replaces the typical bioprocessing steps of crop growth, milling, and fermentation, with a one-step photosynthetic process. However, low yields and slow growth rates limit the economic potential of such endeavors. Rational metabolic engineering methods are hindered by limited cellular knowledge and inadequate models of Synechocystis. Instead, inverse metabolic engineering, a scheme based on combinatorial gene searches which does not require detailed cellular models, but can exploit sequence data and existing molecular biological techniques, was used to find genes that (1) improve the production of the biopolymer poly-3-hydroxybutyrate (PHB) and (2) increase the growth rate. A fluorescence activated cell sorting assay was developed to screen for high PHB producing clones. Separately, serial sub-culturing was used to select clones that improve growth rate. Novel gene knock-outs were identified that increase PHB production and others that increase the specific growth rate. These improvements make this system more attractive for industrial use and demonstrate the power of inverse metabolic engineering to identify novel phenotype-associated genes in poorly understood systems.

Average annual reading growth rate progress of children who are deaf, use a cochlear implant and attend an auditory-oral school

Reading growth rate averages were established for children who are deaf, have a unilateral cochlear implant and attend an auditory-oral school.

The ecological niche of Daphnia magna characterized using population growth rate

The concept of an organism's niche is central to ecological theory, but an operational definition is needed that allows both its experimental delineation and interpretation of field distributions of the species. Here we use population growth rate (hereafter, pgr) to de. ne the niche as the set of points in niche space where pgr. 0. If there are just two axes to the niche space, their relationship to pgr can be pictured as a contour map in which pgr varies along the axes in the same way that the height of land above sea level varies with latitude and longitude. In laboratory experiments we measured the pgr of Daphnia magna over a grid of values of pH and Ca2+, and so defined its "laboratory niche'' in pH-Ca2+ space. The position of the laboratory niche boundary suggests that population persistence is only possible above 0.5 mg Ca2+/L and between pH 5.75 and pH 9, though more Ca2+ is needed at lower pH values. To see how well the measured niche predicts the field distribution of D. magna, we examined relevant field data from 422 sites in England and Wales. Of the 58 colonized water bodies, 56 lay within the laboratory niche. Very few of the sites near the niche boundary were colonized, probably because pgr there is so low that populations are vulnerable to extinction by other factors. Our study shows how the niche can be quantified and used to predict field distributions successfully.

The use of image analysis to estimate population growth rate in Daphnia magna

1. Population growth rate (PGR) is central to the theory of population ecology and is crucial for projecting population trends in conservation biology, pest management and wildlife harvesting. Furthermore, PGR is increasingly used to assess the effects of stressors. Image analysis that can automatically count and measure photographed individuals offers a potential methodology for estimating PGR. 2. This study evaluated two ways in which the PGR of Daphnia magna, exposed to different stressors, can be estimated using an image analysis system. The first method estimated PGR as the ratio of counts of individuals obtained at two different times, while the second method estimated PGR as the ratio of population sizes at two different times, where size is measured by the sum of the individuals' surface areas, i.e. total population surface area. This method is attractive if surface area is correlated with reproductive value (RV), as it is for D. magna, because of the theoretical result that PGR is the rate at which the population RV increases. 3. The image analysis system proved reliable and reproducible in counting populations of up to 440 individuals in 5 L of water. Image counts correlated well with manual counts but with a systematic underestimate of about 30%. This does not affect accuracy when estimating PGR as the ratio of two counts. Area estimates of PGR correlated well with count estimates, but were systematically higher, possibly reflecting their greater accuracy in the study situation. 4. Analysis of relevant scenarios suggested the correlation between RV and body size will generally be good for organisms in which fecundity correlates with body size. In these circumstances, area estimation of PGR is theoretically better than count estimation. 5. Synthesis and applications. There are both theoretical and practical advantages to area estimation of population growth rate when individuals' reproductive values are consistently well correlated with their surface areas. Because stressors may affect both the number and quality of individuals, area estimation of population growth rate should improve the accuracy of predicting stress impacts at the population level.

Population growth rate and carrying capacity for springtails Folsomia candida exposed to ivermectin

Forecasting the effects of stressors on the dynamics of natural populations requires assessment of the joint effects of a stressor and population density on the population response. The effects can be depicted as a contour map in which the population response, here assessed by Population growth rate, varies with stress and density in the same way that the height of land above sea level varies with latitude and longitude. We present the first complete map of this type using as our model Folsomia candida exposed to five different concentrations of the widespread anthelmintic veterinary medicine ivermectin in replicated microcosm experiments lasting 49 days. The concentrations of ivermectin in yeast were 0.0, 6.8 28.83 66.4 and 210.0 mg/L wet weight. Increasing density and chemical concentration both significantly reduced the population growth rate of Folsomia candida, in part through effects on food consumption and fecundity. The interaction between density and ivermectin concentration was "less-than-additive," implying that at high density populations were able to compensate for the effects of the chemical. This result demonstrates that regulatory protocols carried out at low density (as in most past experiments) may seriously overestimate effects in the field, where densities are locally high and populations are resource limited (e.g., in feces of livestock treated with ivermectin).

Joint effects of density and a growth inhibitor on the life history and population growth rate of the midge Chironomus riparius

Results of previous laboratory studies suggest that high population density often buffers the effects of chemical stressors that predominately increase mortality. Mortality stressors act to release more resources for the survivors and, therefore, produce less-than-additive effects. By contrast, growth stressors are expected to have opposite results or more-than-additive effects. We investigated the effects of a growth inhibitor (lufenuron) on larval growth and survival of Chironomus riparius and examined its joint effects with density on population growth rate (PGR). Exposure to 60 mu g/kg sediment or greater inhibited larval growth, and exposure to 88 mu g/kg or greater often resulted in mortality before reaching emergence. The effects of lufenuron, however, differed with population density. At 88 mu g/kg, mortalities and, to a lesser extent, reduced fecundity resulted in a reduction in PGR at low density. Conversely, when populations were initiated at high density, PGR was similar to that of controls, because the few survivors reached maturity sooner and started producing offspring earlier. The effect of density as a growth stressor therefore was stronger than the effect of lufenuron, which had effects similar to those of a mortality stressor and produced less-than-additive effects. Longterm studies under field conditions, however, are needed before less-than-additive effects are considered to be the norm.

Growth rate and physical properties of Erythrina variegata with regard to dry matter production

Erythrina variegata grown from seeds showed a great deal of variation with respect to height, diameter, density of wood and dry matter production. Statistical analysis showed that the density of wood produced by any plant was not related to its growth rate, but dry matter production was associated with plant growth rate (height and diameter) that could lead to overall increased dry matter or biomass production.