A proposal for pellet production from residual woody biomass in the island of Majorca (Spain)

The use of residual biomass for energy purposes is of great interest in isolated areas like Majorca for waste reduction, energy sufficiency and renewable energies development. In addition, densification processes lead to easy-to-automate solid biofuels which additionally have higher energy density. The present study aims at (i) the estimation of the potential of residual biomass from woody crops as well as from agri-food and wood industries in Majorca, and (ii) the analysis of the optimal location of potential pellet plants by means of a GIS approach (location-allocation analysis) and a cost evaluation of the pellets production chain. The residual biomass potential from woody crops in Majorca Island was estimated at 35,874 metric tons dry matter (t DM) per year, while the wood and agri-food industries produced annually 21,494 t DM and 2717 t DM, respectively. Thus, there would be enough resource available for the installation of 10 pellet plants of 6400 t·year−1 capacity. These plants were optimally located throughout the island of Mallorca with a maximum threshold distance of 28 km for biomass transport from the production points. Values found for the biomass cost at the pellet plant ranged between 57.1 €·t−1 and 63.4 €·t−1 for biomass transport distance of 10 and 28 km. The cost of pelleting amounted to 56.7 €·t−1; adding the concepts of business fee, pellet transport and profit margin (15%), the total cost of pelleting was estimated at 116.6 €·t−1. The present study provides a proposal for pellet production from residual woody biomass that would supply up to 2.8% of the primary energy consumed by the domestic and services sector in the Balearic Islands.

Modelling a biomass supply chain through discrete-event simulation

The organizational structure of the companies in the biomass energy sector, regarding the supply chain management services, can be greatly improved through the use of software decision support tools. These tools should be able to provide real-time alternative scenarios when deviations from the initial production plans are observed. To make this possible it is necessary to have representative production chain process models where several scenarios and solutions can be evaluated accurately. Due to its nature, this type of process is more adequately represented by means of event-based models. In particular, this work presents the modelling of a typical biomass production chain using the computing platform SIMEVENTS. Throughout the article details about the conceptual model, as well as simulation results, are provided

Expansion of sunflower crop production in Brazil: a survey of future trends.

Sunflower cropped area in Brazil has been showing potential possibilities to be increased in a short period of time for biofuel production. Planning the activities is one of the requirements for the success of future cropped area expansion. This requires a previous survey that identifies future trends in the transformation and rearrangement of the sunflower agro-industry sector and also identifies technological needs that may affect this process. With the objectives of identify future trends and technological needs, a value production chain was built and a questionary was applied to agents of all the sectors participating at the V National Brazilian Symposium of Sunflower and at the XVII Sunflower National Research Meeting Network. The results pointed out a strong tendency for area expansion in the next two to five years (75%); being as a secondary follow-up crop (83%) specially after soybean and top be used for biofuel (77%). The main research needs were linked with disease control, crop zoning and varietal improvement for disease resistance and high oleic oil content. Also considering the vision of and concerns regarding the future expansion and transformation of the sunflower productive complex, it is believed that the expansion is a consolidated trend, requiring a strategic sector planning associated with an economic and technological police for its success within the Brazilian agribusiness.

Relationship between the Physicochemical Properties of Nonchitinolytic Listeria and Salmonella and Their Attachment to Shrimp Carapace

Listeria and Salmonella are important foodborne pathogens normally associated with the shrimp production chain. This study investigated the potential of Salmonella Typhimurium, Salmonella Senftenberg, and Listeria monocytogenes (Scott A and V7) to attach to and colonize shrimp carapace. Attachment and colonization of Listeria and Salmonella were demonstrated. Shrimp abdominal carapaces showed higher levels of bacterial attachment (P < 0.05) than did head carapaces. Listeria consistently exhibited greater attachment (P < 0.05) than did Salmonella on all surfaces. Chitinase activity of all strains was tested and found not to occur at the three temperatures (10, 25. and 37 degrees C) tested. The surface physicochemical properties of bacterial cells and shrimp carapace were Studied to determine their role in attachment and colonization. Salmonella had significantly (P < 0.05) more positive (-3.9 and -6.0 mV) cell surface charge than Listeria (-18 and -22.8 mV) had. Both bacterial species were found to be hydrophilic (<35%) when measured by the bacterial adherence to hydrocarbon method and by contact angle (theta) measurements (Listeria, 21.3 and 24.8 degrees, and Salmonella, 14.5 and 18.9 degrees). The percentage of cells retained by Pheryl-Sepharose was lower for Salmonella (12.8 to 14.8%) than it was for Listeria (26.5 to 31.4%). The shrimp carapace was found to be hydrophobic (theta = 74.5 degrees), and a significant (P < 0.05) difference in surface roughness between carapace types was noted. There was a linear correlation between bacterial cell Surface charge (r(2) = 0.95) and hydrophobicity (r(2) = 0.85) and initial attachment (P < 0.05) of Listeria and Salmonella to carapaces. However, the same properties Could not be related to subsequent colonization.

Microbial quality of hemp (Cannabis sativa L.) and flax (Linum usitatissimum L.) from plants to thermal insulation

Flax and hemp have traditionally been used mainly for textiles, but recently interest has also been focused on non-textile applications. Microbial quality throughout the whole processing chain of bast fibres has not previously been studied. This study concentrates on the microbial quality and possible microbial risks in the production chain of hemp and flax fibres and fibrous thermal insulations. In order to be able to utilize hemp and flax fibres, the bast fibres must be separated from the rest of the plant. Non-cellulosic components can be removed with various pretreatment processes, which are associated with a certain risk of microbial contamination. In this study enzymatic retting and steam explosion (STEX) were examined as pretreatment processes. On the basis of the results obtained in this study, the microbial contents on stalks of both plants studied increased at the end of the growing season and during the winter. However, by processing and mechanical separation it is possible to produce fibres containing less moulds and bacteria than the whole stem. Enzymatic treatment encouraged the growth of moulds in fibres. Steam explosion reduced the amount of moulds in fibres. Dry thermal treatment used in this study did not markedly reduce the amount of microbes. In this project an emission measurement chamber was developed which was suitable for measurements of emissions from both mat type and loose fill type insulations, and capable of interdisciplinary sampling. In this study, the highest amounts of fungal emissions were in the range of 10^3 10^5 cfu/m^3 from the flax and hemp insulations at 90% RH of air. The fungal emissions from stone wool, glass wool and recycled paper insulations were below 10^2 cfu/m^3 even at 90% RH. Equally low values were obtained from bast fibrous materials in lower humidities (at 30% and 80% RH of air). After drying of moulded insulations at 30% RH, the amounts of emitted moulds were in all cases higher compared to the emissions at 90% RH before drying. The most common fungi in bast fibres were Penicillium and Rhizopus. The widest variety of different fungi was in the untreated hemp and linseed fibres and in the commercial loose-fill flax insulation. Penicillium, Rhizopus and Paecilomyces were the most tolerant to steam explosion. According to the literature, the most common fungi in building materials and indoor air are Penicillium, Aspergillus and Cladosporium, which were all found in some of the bast fibre materials in this study. As organic materials, hemp and flax fibres contain high levels of nutrients for microbial growth. The amount of microbes can be controlled and somewhat decreased by the processing methods presented.

DNA-based detection and characterisation of strictly anaerobic beer-spoilage bacteria

Megasphaera cerevisiae, Pectinatus cerevisiiphilus, Pectinatus frisingensis, Selenomonas lacticifex, Zymophilus paucivorans and Zymophilus raffinosivorans are strictly anaerobic Gram-stain-negative bacteria that are able to spoil beer by producing off-flavours and turbidity. They have only been isolated from the beer production chain. The species are phylogenetically affiliated to the Sporomusa sub-branch in the class "Clostridia". Routine cultivation methods for detection of strictly anaerobic bacteria in breweries are time-consuming and do not allow species identification. The main aim of this study was to utilise DNA-based techniques in order to improve detection and identification of the Sporomusa sub-branch beer-spoilage bacteria and to increase understanding of their biodiversity, evolution and natural sources. Practical PCR-based assays were developed for monitoring of M. cerevisiae, Pectinatus species and the group of Sporomusa sub-branch beer spoilers throughout the beer production process. The developed assays reliably differentiated the target bacteria from other brewery-related microbes. The contaminant detection in process samples (10 1,000 cfu/ml) could be accomplished in 2 8 h. Low levels of viable cells in finished beer (≤10 cfu/100 ml) were usually detected after 1 3 d culture enrichment. Time saving compared to cultivation methods was up to 6 d. Based on a polyphasic approach, this study revealed the existence of three new anaerobic spoilage species in the beer production chain, i.e. Megasphaera paucivorans, Megasphaera sueciensis and Pectinatus haikarae. The description of these species enabled establishment of phenotypic and DNA-based methods for their detection and identification. The 16S rRNA gene based phylogenetic analysis of the Sporomusa sub-branch showed that the genus Selenomonas originates from several ancestors and will require reclassification. Moreover, Z. paucivorans and Z. raffinosivorans were found to be in fact members of the genus Propionispira. This relationship implies that they were carried to breweries along with plant material. The brewery-related Megasphaera species formed a distinct sub-group that did not include any sequences from other sources, suggesting that M. cerevisiae, M. paucivorans and M. sueciensis may be uniquely adapted to the brewery ecosystem. M. cerevisiae was also shown to exhibit remarkable resistance against many brewery-related stress conditions. This may partly explain why it is a brewery contaminant. This study showed that DNA-based techniques provide useful tools for obtaining more rapid and specific information about the presence and identity of the strictly anaerobic spoilage bacteria in the beer production chain than is possible using cultivation methods. This should ensure financial benefits to the industry and better product quality to customers. In addition, DNA-based analyses provided new insight into the biodiversity as well as natural sources and relations of the Sporomusa sub-branch bacteria. The data can be exploited for taxonomic classification of these bacteria and for surveillance and control of contaminations.

Content of zinc, iron and their absorption inhibitors in Nicaraguan common beans (Phaseolus vulgaris L.).

Protein-energy malnutrition and mineral deficiencies are two of the three forms of nutritional deficiencies that affect most developing countries due to inadequate access to food and diets based on a sole crop. Common bean (Phaseolus vulgaris L.) is the staple crop of Nicaragua and it has the potential to improve the nutritional status of the poorest group of the nation. Its high content of both protein and nonhaem iron provides many nutrients, but inhibitors also may prevent absorption of iron and zinc by the human consumer. A proper production chain must be followed to ensure the best grain quality for the consumer. To achieve food security, both production and high nutritional content must be maintained. Four nationally important accessions of common bean, with different harvesting dates, were selected to be submitted to two treatments: to evaluate the impact of storage conditions on the end quality of the grain. The duration of the study was six months with sampling every six weeks, and the two treatments were controlled one stored at 40°C and 75 RH %, and the other was stored in in-situ conditions. Proximate and mineral composition was evaluated as well as tannin, phytate and bioavailability. Significant differences among different accessions were found, being the most significant in protein, Fe and Zn content, tannins and phytate. Protein values ranged from 21-23%. Iron content was 61-81 mg/kg but only 3-4% was bioavailable. Zinc content was 21-25 mg/kg and 10-12% was bioavailable. The concentration of phytate ranged from 8.6-9.6 mg/g while tannin values ranged within 37.7-43.8 mg/g. Storage at high temperatures was demonstrated to have an impact on certain nutritional compounds and proved detrimental to final grain quality. Soluble sugar content and tannin content decreased after six months in both storage conditions, IDF decreased in the in-situ and SDF in the stress. The iron content and bioavailability in INTA Biofortificado were not as outstanding as expected, so experiments should be conducted to compare its iron uptake and delivery with other cultivars.

Naudanlihan jalostusketjun hiilijalanjälki Suomessa

Kirjallisuustutkimuksen tavoitteena oli perehtyä kasvihuoneilmiön taustoihin ja kartoittaa aiempia tutkimuksia naudan- ja muiden lihatuotteiden kasvihuonekaasupäästöistä. Lisäksi kirjallisuustutkimuksessa perehdyttiin aiemmissa tutkimuksissa elintarvikkeiden hiilijalanjäljen laskemisessa sovellettuun elinkaarianalyysiin ISO 14040-standardin mukaisesti. Kokeellisen osion tavoitteena oli määrittää naudanlihan hiilijalanjälki Suomessa maatilan portilta kuluttajan ruokapöytään. Tavoitteena oli myös ymmärtää jalostusketjun päästöjen merkitys verrattuna koko naudanlihan tuotantoketjuun ja määrittää jalostusketjun vaiheiden merkitys ketjussa. Työn toiminnallisena yksikkönä toimi kilo naudanlihaa. Työ toteutettiin perehtymällä yksityiskohtaisesti yhteen naudanlihan jalostusketjuun Suomessa. Päästöt laskettiin todellisten yhteistyöyritykseltä saatujen prosessitietojen perusteella. Tiedot kerättiin tiedonkeruulomakkeella vierailemalla yhteistyöyrityksen kahdessa tuotantolaitoksessa ja täydentämällä tietoja haastatteluilla. Naudanlihan jalostusketjun päästöt olivat 1240 g CO2-ekv/lihakilo. Eniten päästöjä tuottivat jalostusvaihe (310 g CO2-ekv/lihakilo), teurastus (280 g CO2-ekv/lihakilo) ja lihatuotteiden kuljetus kuluttajalle (210 g CO2-ekv/lihakilo). Koko naudanlihan tuotantoketjusta jalostusketjun päästöt muodostivat alle 4 %, sillä syntymästä maatilan portille syntyviksi päästöiksi laskettiin kirjallisuuden perusteella yli 30 000 g CO2-ekv/lihakilo. Jatkossa naudanlihan hiilijalanjälkeä voitaisiin pääasiassa pienentää kehittämällä prosessia maatilan portille asti. Tämän työn tulokset olivat hyvin samansuuruiset verrattuna aiempaan tutkimukseen broilerin jalostusketjun päästöistä Suomessa (Katajajuuri ym. 2008). Tämä vastasi ennakko-odotuksia, sillä jalostusketjujen vaiheissa ei ollut merkittäviä eroja. Aiempia tutkimuksia naudanlihan jalostusketjun päästöistä ei ollut saatavilla.

Estudo do envelhecimento de poliuretanos aplicados na indústria de petróleo

A indústria do petróleo é um dos setores com maior número de sistemas produtivos empregando alta tecnologia. O Brasil é mundialmente renomado como um líder na extração de petróleo, em águas profundas e ultraprofundas. Dentro da cadeia produtiva, grande parte do petróleo e do gás produzido é escoado através de dutos flexíveis que conectam os poços de produção com as plataformas. Existem dois segmentos dessas linhas que recebem diferentes denominações de acordo com o seu local de aplicação. Quando estão apoiadas sobre o fundo do mar, em condição de serviço estático, são denominados flowlines e quando se elevam do fundo do mar até a plataforma, em condição de serviço dinâmico, são denominados risers. Os tubos projetados para aplicações dinâmicas são dotados de bends stiffeners, componentes com formato cônico e, em geral, de base uretânica que têm a função de fornecer uma transição de rigidez suave entre a estrutura dos tubos flexíveis e a extremamente rígida, à plataforma, não permitindo que este componente infrinja seu raio mínimo de operação. A adequada compreensão dos enrijecedores de curvatura e do material empregado em sua fabricação vem se tornando cada vez mais importante na indústria devido à sua crescente utilização, bem como à ocorrência de falhas que vem sendo constatada nos últimos anos. Este trabalho abordou a variação das propriedades mecânicas de poliuretanos pela ação da hidrólise, calor e pela ação dos raios-UV por envelhecimento acelerado, assim como variação de massa, considerando que esses materiais são projetados para uma vida útil superior a vinte anos para trabalhos imersos em meio aquoso.

Emprego da técnica de emissão por fluorescência de ultravioleta no monitoramento de inibidores de corrosão em água produzida

Para aumentar os volumes de extração de petróleo, resolver e prevenir problemas nas operações de produção são utilizados diversos produtos químicos, dentre os quais se destacam os inibidores de corrosão, que são utilizados em toda cadeia produtiva do petróleo visando proteger o sistema da deterioração por corrosão. Os sais de amônio quaternário são uma das classes de inibidores mais utilizadas pela indústria do petróleo devido a sua grande eficiência. Entretanto, sua solubilidade em água faz com que estejam presentes na água produzida representando um risco para contaminação ambiental, visto que possuem baixa biodegrabilidade e potencial de bioacumulação. Como se encontram misturados a outros produtos químicos e sob efeitos das variações do ambiente em que são aplicados, definir um método de análise confiável e viável para monitoramento em linha representa um desafio para os laboratórios de campos de produção. Neste trabalho, foi estudado o emprego da fluorescência de ultravioleta na quantificação de um inibidor de corrosão do tipo sal de amônio quaternário em água. Foram obtidos espectros de emissão do produto comercial em água, além do estudo de variáveis instrumentais e interferentes presentes na água produzida. A comparação com padrões de sal de amônio quaternário permitiu identificar como principal fluorófilo, um sal alquil-aril de amônio quaternário. Estudos de estabilidade revelaram que a adsorção do inibidor de corrosão nas superfícies dos frascos plásticos provoca a queda do sinal fluorescente e que a adição de isopropanol reduz este efeito de 40 para 24%. Foram obtidas curvas de calibração com a formulação comercial e com o cloreto de 2-metil-4-dodecil-benzil-trimetil amônio com uma boa correlação. Amostras sintéticas do inibidor foram determinadas com um erro relativo de 2,70 a 13,32%. O método de adição padrão foi avaliado usando uma amostra de água produzida, e os resultados não foram satisfatórios, devido à interferência, principalmente, de compostos orgânicos aromáticos presentes

As tramas sociais do trabalho ambulante e a experiência de trabalhadores em Rio das Ostras/RJ

A presente dissertação se insere no campo de estudo sobre o trabalho informal, tendo como universo empírico de investigação a experiência de trabalho dos trabalhadores ambulantes integrantes do Programa Renda Alternativa, em Rio das Ostras/RJ. Portanto, a pesquisa foi desdobrada em três dimensões: 1) levantamento e estudo bibliográfico; 2) levantamento de dados sobre a formação sócio-histórica da cidade de Rio das Ostras; e, 3) trabalho de campo com ambulantes. Por meio desses dispositivos, a pesquisa buscou compreender os laços entre informalidade do trabalho e dinâmica capitalista, por meio da tradição de estudos das Ciências Sociais nessa área. Seguidamente, a pesquisa se ocupou do estudo de outras investigações sobre trabalho ambulante visando conhecer e ampliar o escopo de análise das peculiaridades desse tipo de trabalho no contexto de reprodução social da chamada superpopulação relativa. Esse universo de questões teóricas, analíticas e empíricas foi confrontado com as especificidades do contexto socioeconômico da cidade de Rio das Ostras, recentemente recomposta como um dos elos da cadeia produtiva do petróleo. Outro eixo da investigação de campo foi conhecer o trabalho, o que foi realizado por meio de entrevistas semi-estruturadas com os trabalhadores ambulantes do município, buscando perceber a relação do trabalhador com o trabalho ao longo de sua vida, as marcas das conjunturas socioeconômicas nas trajetórias e o papel da família e do associativismo na ocupação ambulante. Os achados da pesquisa mostram que o trabalho ambulante acomete gerações de trabalhadores como consequência do desenvolvimento desigual e dependente do capitalismo que limita a oferta de emprego. Somado a isso temos os processos de transformações socioeconômicas das últimas décadas que intensificam as formas de precarização do trabalho potencializando a chamada informalidade do trabalho. Esse processo se intensifica na região em estudo através dos impactos trazidos pelo intenso incremento das indústrias de petróleo e gás que não absorvem a força de trabalho disponível no local e atraída, engendrando uma densa superpopulação relativa para o capital, no município. A experiência de trabalho dos ambulantes que participaram da pesquisa mostra que a mesma é entrecortada por formas laborativas variadas, baixa qualificação profissional, além de dependência dos familiares, de ações públicas do Estado e do associativismo. A expropriação do direito ao emprego empurra os trabalhadores para experiências laborativas inseguras, incertas e sem proteção social. A repetição dessa história entre familiares amplia a percepção da perenidade da expropriação social entre gerações de trabalhadores.

Impacto de planificación estratégica en la cadena productiva de vinos básicos de la Provincia de San Juan

p.151-156

The Role of Water Content and Paste Proportion on Physico-mechanical Properties of Alkali Activated Fly Ash–Ggbs Concrete

The growth of the construction industry worldwide poses a serious concern on the sustainability of the building material production chain, mainly due to the carbon emissions related to the production of Portland cement. On the other hand, valuable materials from waste streams, particularly from the metallurgical industry, are not used at their full potential. Alkali activated concrete (AAC) has emerged in the last years as a promising alternative to traditional Portland cement based concrete for some applications. However, despite showing remarkable strength and durability potential, its utilisation is not widespread, mainly due to the lack of broadly accepted standards for the selection of suitable mix recipes fulfilling design requirements, in particular workability, setting time and strength. In this paper, a contribution towards the design development of AAC synthetized from pulverised fuel ash (60%) and ground granulated blast furnace slag (40%) activated with a solution of sodium hydroxide and sodium silicate is proposed. Results from a first batch of mixes indicated that water content influences the setting time and that paste content is a key parameter for controlling strength development and workability. The investigation indicated that, for the given raw materials and activator compositions, a minimum water to solid (w/s) ratio of 0.37 was needed for an initial setting time of about 1 hour. Further work with paste content in the range of 30% to 33% determined the relationship between workability and strength development and w/s ratio and paste content. Strengths in the range of 50 - 60 MPa were achieved.

Pathogens in Milk: Enterobacter Species. Reference Module in Food Sciences.

Enterobacter species commonly occur in the environment and are recognized as opportunistic human pathogens in clinical settings. However, with the exception of Enterobacter sakazakii (Cronobacter), Enterobacter species are not normally considered foodborne pathogens. Cronobacter are particularly associated with illness in infants, particularly within the first 3 months after birth. Therefore, although Cronobacter are found in a wide range of fresh and dried food materials, it is their contamination of the infant formula production chain that is the major cause for concern. Cronobacter are noted for their ability to survive during desiccation and their persistence in dried infant food for at least 2 years.

O empreendedorismo português na cidade do Recife na primeira metade do século XX

A tese analisa o empreendedorismo do imigrante português na cidade do Recife, Estado de Pernambuco, Nordeste do Brasil, durante a primeira metade do século XX. O foco da tese pode ser assim formulado: teria o imigrante português sido empreendedor nesse cenário de mudança econômica e cultural dos primeiros cinquenta anos do século XX, seja como grupo étnico, seja como pessoa de comportamento empreendedor? O corpus teórico principal é, portanto, derivado do campo do empreendedorismo. É uma pesquisa interdisciplinar, que se ampara nas áreas de história, estudos migratórios, econômicos e organizacionais. De acordo com a literatura consultada, esse tipo de abordagem não é incomum no vasto campo do empreendedorismo (Fillion, 1999 e Martinelli, 2007). À luz dessa visão interdisciplinar, a investigação debruça-se sobre o período referido, resgata a trajetória desse imigrante no país e no Recife e discute sua inserção na economia e sociedade locais. Identifica características do dinamismo econômico comercial existente no período e reconstrói a atmosfera de modernidade que a cidade atravessava no mesmo interregno histórico. Para seu desenvolvimento, a pesquisa se apóia em conteúdos de estudos migratórios, históricos e econômicos porque nesse interregno de tempo, a cidade do Recife estava atravessando a chamada era da modernidade nas esferas econômica, cultural e comportamental. No que diz respeito às questões migratórias, a pertinência é óbvia porque o tema do trabalho tem como alvo o imigrante luso. Já quanto à esfera econômica e ao contexto histórico da modernidade, seus conteúdos são trabalhados como o cenário ou o teatro de operações no qual o ator social, imigrante luso, movimentou-se. O trabalho adota, portanto, o olhar de ourives a procurar e a espiar nos textos, livros, discursos visitados e entrevistas realizadas, eventos ou sinais que conduzam à compreensão e interpretação do comportamento do ator econômico, o imigrante português, na história empresarial da cidade do Recife, na condição de empreendedor. Trata-se, por assim dizer, de uma pesquisa de postura quase arqueológica voltada a procurar achados, materiais e imateriais, que denunciem e permitam a discussão e análise do foco acima citado. Diferentemente de pesquisas recentes a serem referidas no capítulo III que exploram o comportamento empreendedor e o empreendedorismo étnico no cenário dos dias de hoje, o estudo olha pelo retrovisor para quase um século atrás e tenta reconstituir e identificar, na história do imigrante português na cidade, conteúdos empreendedorísticos. Está estruturada em 09 (nove) capítulos. No primeiro, são indicados os objetivos perseguidos, a relevância do estudo sob o ponto de vista teórico e os percalços que a pesquisa atravessou para atingir seu termo final. Faz-se, ainda, uma apresentação detalhada dos demais capítulos do trabalho. No corpo do texto, estão ainda, estampadas imagens que testemunham a presença lusa na cidade e documentam a atmosfera da vida do Recife, no período pesquisado. Os resultados encontrados sinalizam para evidências consistentes de empreendedorismo de natureza étnico lusitana nas cadeias produtivas – conceito a ser definido no 9º capítulo– das indústrias da panificação; de terreno, ferragens e construção; e alimentos em geral. Indica, ainda, comportamento empreendedor do imigrante português em diversas atividades econômicas, desde exportação e importação, cafés, restaurantes até o setor de entretenimento em geral. Acredita-se, destarte, que os resultados alcançados podem aditar contribuições relevantes nos campos referidos acima, bem como indicar novos temas de investigação que desdobrem sugestões formuladas nas considerações finais da investigação.