A tecnologia da reciclagem de polímeros

Solid municipal waste contains a large volume of polymers and its final disposal is a serious environmental problem. Consequently, the recycling of the principal polymers present in the solid waste is an alternative. In this review we describe the mechanical and chemical recycling of polymers and the energy recovery from plastic wastes. Polymer recycling involves not only the development of processing technologies, but also the solution of many chemical and analytical problems. The technological, economical and social aspects of polymer recycling are also considered.

Biocombustíveis a partir de óleos e gorduras: desafios tecnológicos para viabilizá-los

Periodically, during petroleum shortage, fatty acids and their derivatives have been used as alternative fuels to those derived from petroleum. Different approaches have been proposed, including the use of neat fats and oils or their derivatives. Indeed, the utilization of biodiesel produced by alcoholysis of triacilglycerides or esterification of fatty acids, or hydrocarbons obtained from cracking of fatty materials were studied and used in several countries. Increasing concerns about energy security and climate changes have lead several countries, including Brazil, to start up biofuels programs. Different technologies are currently being developed in order to produce biofuels with economical feasibility. In this work are discussed alternative fatty raw-materials and processing technologies that are currently being studied in order to produce fuels suitable to sustainable substitute diesel fuel.

Puun ja turpeen seospolton vaikutus tuhkan hyötykäyttökohteisiin

Työn tavoitteena oli selvittää puun ja turpeen seospolton vaikutukset tuhkien hyötykäyttökohteiden valintaan laitoksella tehtävien koeajojen ja kustannus- sekä SWOT-analyysien avulla. Lisäksi tavoitteena oli selvittää lainsäädännön vaikutukset tuhkien hyötykäyttöön. Kustannusanalyysissä tarkasteltiin tuhkien hyödyntämisen nykytilan lisäksi rakeistuslaitosinvestointia ja selvitettiin eri hyötykäyttövaihtoehtojen etuja ja haittoja. Lainsäädäntö vaikuttaa oleellisesti tuhkien hyötykäyttöön. Hyötykäyttöä säädellään sekä kansallisella että EU-tasolta tulevalla lainsäädännöllä. Ympäristölainsäädännön ja etenkin jätelainsäädännön kokonaisuudistuksen myötä myös hyötykäyttöä koskevat lainsäädäntö uudistui. Energiantuotannon tuhkat tulivat jäteverolain piiriin ja lannoiteasetuksenuudistuksella pyrittiin helpottamaan tuhkien lannoitekäyttöä. Myös jäteluokittelu ja sen päättyminen tuhkien osalta vaikuttaa olennaisesti tuhkien käsittelymenetelmien ja hyödyntämisen kannattavuuteen. Jäteluokituksen päättyminen voi viedä tuhkat kemikaalilainsäädännön piiriin. Kustannus- ja SWOT-analyysissä selvitettiin tuhkien hyödyntämisen kannalta keskeiset kustannustekijät. Rakeistuslaitosinvestoinnissa huomioitiin erilaiset tuhkien käsittelymäärät ja niiden vaikutukset kustannuksiin ja investoinnin kannattavuuteen. SWOT-analyysin avulla selvitettiin hyödyntämisen vahvuudet, heikkoudet, mahdollisuudet ja uhkatekijät. Polttoainesuhteella ei ollut poissulkevaa vaikutusta tuhkien hyötykäyttövalintaan. Lentotuhkat soveltuivat parhaiten lannoitehyötykäyttöön ja pohjatuhkat maarakennushyötykäyttöön. Rakeistuslaitosinvestointi olisi kannattava etenkin suuremmilla tuhkamäärillä.

Effects of peeling methods on the quality of cubiu fruits

Cubiu (Solanum sessiliflorum Dunal) is an Amazonian Basin native fruit. Its importance comes from its high contents of pectin. Currently, processing technologies are necessary for the substitution of the traditional system (small crops and small-scale processing) for a larger scale system and thus increase the use of biodiversity and promote the implementation of Local Productive Arrangements of agribusiness in the Amazon. This research aims to evaluate the methods of peeling cubiu. Ripe fruits were divided into lots (150 each) and subjected to the following treatments: immersion in 2.5% NaOH boiling solution for 5 minutes, exposure to water vapor, and immersion in water at 96 ºC for 5, 10, 15 and 20 minutes. The peel released during heat treatment and immediately removed under running tap water. In the control treatment, the fruits were manually peeled (unheated) with a stainless steel knife. The treatments were evaluated for completeness and ease of peeling, tissue integrity, texture, and peroxidase activity. The immersion in 2.5% NaOH boiling solution (5 minutes) stood out as the best treatment since it inhibited the enzymatic browning and intensified the natural yellow color of the cubiu fruit and easily and fully peeled the whole fruit more rapidly without damaging its tissues. This treatment was chosen as the most advantageous because it can promote simultaneous peeling and bleaching. Therefore, it is recommended for cubiu industrial processing.

Effect of Material Recycling on the Feasibility of Solid Recovered Fuel Fired Power Plant

This master’s thesis examines the effects of increased material recycling on different waste-to-energy concepts. With background study and a developed techno-economic computational method the feasibility of chosen scenarios with different combinations of mechanical treatment and waste firing technologies can be evaluated. The background study covers the waste scene of Finland, and potential market areas Poland and France. Calculated cases concentrate on municipal solid waste treatment in the Finnish operational environment. The chosen methodology to approach the objectives is techno-economic feasibility assessment. It combines calculation methods of literature and practical engineering to define the material and energy balances in chosen scenarios. The calculation results together with other operational and financial data can be concluded to net present values compared between the scenarios. For the comparison, four scenarios, most vital and alternative between each other, are established. The baseline scenario is grate firing of source separated mixed municipal solid waste. Second scenario is fluidized bed combustion of solid recovered fuel produced in mechanical treatment process with metal separation. Third scenario combines a biomaterial separation process to the solid recovered fuels preparation and in the last scenario plastics are separated in addition to the previous operations. The results indicated that the mechanical treatment scenarios still need to overcome some problems to become feasible. Problems are related to profitability, residue disposal and technical reliability. Many uncertainties are also related to the data gathered over waste characteristics, technical performance and markets. With legislative support and development of further processing technologies and markets of the recycled materials the scenarios with biomaterial and plastic separation may operate feasibly in the future.

Proceso de transformación de insumo a producto cárnico bovino de la organización HB carnes PC S.A.S Del Frigorífico Guadalupe

El presente trabajo brinda un estudio de la cadena de abastecimiento y de producción del sector cárnico colombiano específicamente de una micropyme ubicada en la Central de Carnes Guadalupe del Frigorífico Guadalupe. Estudiando y evaluando los diferentes procesos que intervienen en dicha empresa con base en los estándares y regulaciones tanto a nivel nacional como internacional. El estudio usa una metodología donde se da a conocer la situación del mercado ganadero en diferentes momentos del tiempo, así como una proyección a futuro a propósito de las nuevas condiciones de mercado que implican la firma del Tratado de Libre Comercio con Estados Unidos. Se lleva a cabo una revisión teórica y conceptual donde se identifican las mejores prácticas dentro de la cadena cárnica observando experiencias de éxito en Colombia y otros países que han tecnificado el funcionamiento de la misma. Que servirá de base para la evaluación de la cadena específica de HB CARNES PC S.A.S, la micropyme a estudiar. Por último se lleva a cabo un ejercicio de simulación de exportación del producto cárnico desde Colombia a Rusia, a través de la matriz de Distribución Física Internacional, como una estrategia alterna a lo propuesto por el TLC firmado.

Proceso de transformación de insumo a producto cárnico bovino de la organización HB carnes PC S.A.S del Frigorífico Guadalupe

El presente trabajo brinda un estudio de la cadena de abastecimiento y de producción del sector cárnico colombiano específicamente de una micropyme ubicada en la Central de Carnes Guadalupe del Frigorífico Guadalupe. Estudiando y evaluando los diferentes procesos que intervienen en dicha empresa con base en los estándares y regulaciones tanto a nivel nacional como internacional. El estudio usa una metodología donde se da a conocer la situación del mercado ganadero en diferentes momentos del tiempo, así como una proyección a futuro a propósito de las nuevas condiciones de mercado que implican la firma del Tratado de Libre Comercio con Estados Unidos. Se lleva a cabo una revisión teórica y conceptual donde se identifican las mejores prácticas dentro de la cadena cárnica observando experiencias de éxito en Colombia y otros países que han tecnificado el funcionamiento de la misma. Que servirá de base para la evaluación de la cadena específica de HB CARNES PC S.A.S, la micropyme a estudiar. Por último se lleva a cabo un ejercicio de simulación de exportación del producto cárnico desde Colombia a Rusia, a través de la matriz de Distribución Física Internacional, como una estrategia alterna a lo propuesto por el TLC firmado.

Effects of Milling on Surface Integrity of Low-Carbon Steel

This work measured the effect of milling parameters on the surface integrity of low-carbon alloy steel. The Variance Analysis showed that only depth of cut did not influence on the workpiece roughness and the Pearson's Coefficient indicated that cutting speed was more influent than tool feed. All cutting parameters introduced tensile residual stress in workpiece surface. The chip formation mechanism depended specially on cutting speed and influenced on the roughness and residual stress of workpiece.

Efeito das condições de congelamento sobre atributos de qualidade de fatias de abacaxi liofilizado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desidratação de abóbora (Cucurbita moschata) por métodos combinados

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Efeito da velocidade de congelamento sobre a liofilização, reidratação e atributos de qualidade de fatias de maçã

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Effects of laser beam energy on the pulsed Nd:YAG laser welding of thin sheet corrosion resistant materials

The aim of this study was to value the possibility to join, for pulsed Nd:YAG laser welding, thin foils lap joints for sealing components in corrosive environment. Experimental investigations were carried out using a pulsed neodymium: yttrium aluminum garnet laser weld to examine the influence of the pulse energy in the characteristics of the weld fillet. The pulse energy was varied from 1.0 to 2.5 J at increments of 0.25 J with a 4 ms pulse duration. The base materials used for this study were AISI 316L stainless steel and Ni-based alloys foils with 100 mu m thickness. The welds were analyzed by electronic and optical microscopy, tensile shear tests and micro hardness. The results indicate that pulse energy control is of considerable importance to thin foil weld quality because it can generate good mechanical properties and reduce discontinuities in weld joints. The ultimate tensile strength of the welded joints increased at first and then decreased as the pulse energy increased. In all the specimens, fracture occurred in the top foil heat-affected zone next to the fusion line. The microhardness was almost uniform across the parent metal, HAZ and weld metal. A slight increase in the fusion zone and heat-affected zone compared to those measured in the base metal was observed. This is related to the microstructural refinement in the fusion zone, induced by rapid cooling of the laser welding. The process appeared to be very sensitive to the gap between couples.

Tissue-engineering-based Strategies for Regenerative Endodontics

Stemming from in vitro and in vivo pre-clinical and human models, tissue-engineering-based strategies continue to demonstrate great potential for the regeneration of the pulp-dentin complex, particularly in necrotic, immature permanent teeth. Nanofibrous scaffolds, which closely resemble the native extracellular matrix, have been successfully synthesized by various techniques, including but not limited to electrospinning. A common goal in scaffold synthesis has been the notion of promoting cell guidance through the careful design and use of a collection of biochemical and physical cues capable of governing and stimulating specific events at the cellular and tissue levels. The latest advances in processing technologies allow for the fabrication of scaffolds where selected bioactive molecules can be delivered locally, thus increasing the possibilities for clinical success. Though electrospun scaffolds have not yet been tested in vivo in either human or animal pulpless models in immature permanent teeth, recent studies have highlighted their regenerative potential both from an in vitro and in vivo (i.e., subcutaneous model) standpoint. Possible applications for these bioactive scaffolds continue to evolve, with significant prospects related to the regeneration of both dentin and pulp tissue and, more recently, to root canal disinfection. Nonetheless, no single implantable scaffold can consistently guide the coordinated growth and development of the multiple tissue types involved in the functional regeneration of the pulp-dentin complex. The purpose of this review is to provide a comprehensive perspective on the latest discoveries related to the use of scaffolds and/or stem cells in regenerative endodontics. The authors focused this review on bioactive nanofibrous scaffolds, injectable scaffolds and stem cells, and pre-clinical findings using stem-cell-based strategies. These topics are discussed in detail in an attempt to provide future direction and to shed light on their potential translation to clinical settings.

Blattmeier

Technische Produktionssysteme und Prozesse - welcher Technologie auch immer - müssen den Bedürfnissen der industriellen Bauteilherstellung für Endanwendungen im Automobilbau entsprechen. Es stellt sich zunächst die Frage, auf welchem technologischen Reifegrad sich die generativen Technologien für den Automobilbau derzeit befinden? Welche außerordentlichen Vorteile können generative Prozessketten gegenüber konventionellen Herstellungsverfahren bieten und welche Hürden müssen genommen werden? Im Vordergrund der Untersuchung steht die Betrachtung von Pre-, In- und Post-Prozessen generativer wie auch konventioneller Produktionsverfahren. Bei der Gegenüberstellung der Prozessketten werden Maßstäbe angesetzt, die derzeit bei der Bauteilherstellung im Automobilbau Gültigkeit haben und auf Kriterien wie Effizienz, Reproduzierbarkeit und Kontrollierbarkeit aufbauen. Schließlich findet eine Einschätzung aus der Perspektive der Technologieintegration in derzeitige Produktionssysteme und Lieferketten statt. Es werden Restriktionen und Handlungsfelder von generativen Prozessen deutlich, die für den Einsatz für Endkunden-Bauteile im Fahrzeugbau behandelt werden müssen.

Technologische Reife von generativen Herstellungsverfahren für Endanwendungen im Automobilbau

Technische Produktionssysteme und Prozesse - welcher Technologie auch immer - müssen den Bedürfnissen der industriellen Bauteilherstellung für Endanwendungen im Automobilbau entsprechen. Es stellt sich zunächst die Frage, auf welchem technologischen Reifegrad sich die generativen Technologien für den Automobilbau derzeit befinden? Welche außerordentlichen Vorteile können generative Prozessketten gegenüber konventionellen Herstellungsverfahren bieten und welche Hürden müssen genommen werden? Im Vordergrund der Untersuchung steht die Betrachtung von Pre-, In- und Post-Prozessen generativer wie auch konventioneller Produktionsverfahren. Bei der Gegenüberstellung der Prozessketten werden Maßstäbe angesetzt, die derzeit bei der Bauteilherstellung im Automobilbau Gültigkeit haben und auf Kriterien wie Effizienz, Reproduzierbarkeit und Kontrollierbarkeit aufbauen. Schließlich findet eine Einschätzung aus der Perspektive der Technologieintegration in derzeitige Produktionssysteme und Lieferketten statt. Es werden Restriktionen und Handlungsfelder von generativen Prozessen deutlich, die für den Einsatz für Endkunden-Bauteile im Fahrzeugbau behandelt werden müssen.