Support for an auto-associative model of spoken cued recall: Evidence from fMRI

Cued recall and item recognition are considered the standard episodic memory retrieval tasks. However, only the neural correlates of the latter have been studied in detail with fMRI. Using an event-related fMRI experimental design that permits spoken responses, we tested hypotheses from an auto-associative model of cued recall and item recognition [Chappell, M., & Humphreys, M. S. (1994). An auto-associative neural network for sparse representations: Analysis and application to models of recognition and cued recall. Psychological Review, 101, 103-128]. In brief, the model assumes that cues elicit a network of phonological short term memory (STM) and semantic long term memory (LTM) representations distributed throughout the neocortex as patterns of sparse activations. This information is transferred to the hippocampus which converges upon the item closest to a stored pattern and outputs a response. Word pairs were learned from a study list, with one member of the pair serving as the cue at test. Unstudied words were also intermingled at test in order to provide an analogue of yes/no recognition tasks. Compared to incorrectly rejected studied items (misses) and correctly rejected (CR) unstudied items, correctly recalled items (hits) elicited increased responses in the left hippocampus and neocortical regions including the left inferior prefrontal cortex (LIPC), left mid lateral temporal cortex and inferior parietal cortex, consistent with predictions from the model. This network was very similar to that observed in yes/no recognition studies, supporting proposals that cued recall and item recognition involve common rather than separate mechanisms.

Turning the Kaleidoscope - (E)FL Educational Experience and Inquiry as Auto/biography

This book is a study on learning, teaching/counselling, and research on the two. My quest has been to find a pedagogically-motivated way of researching learning and teaching interaction, and in particular counselling, in an autonomous language-learning environment. I have tried to develop a method that would make room for lived experience, meaning-making and narrating, because in my view these all characterise learning encounters between language learners and counsellors, and learners and their peers. Lived experience as a source of meaning, telling and co-telling becomes especially significant when we try to listen to the diverse personal and academic voices of the past as expressed in autobiographical narratives. I have aimed at researching various ALMS dialogues (Autonomous Learning Modules, University of Helsinki Language Centre English course and programme), and autobiographical narratives within them, in a way that shows respect for the participants, and that is relevant, reflective and, most importantly, self-reflexive. My interest has been in autobiographical telling in (E)FL [(English as a) foreign language], both in students first-person written texts on their language- learning histories and in the sharing of stories between learners and a counsellor. I have turned to narrative inquiry in my quest and have written the thesis as an experiential narrative. In particular, I have studied learners and counsellors in one and the same story, as characters in one narrative, in an attempt to avoid the impression that I am telling yet another separate, anecdotal story, retrospectively. Through narrative, I have shed light on the subjective dimensions of language learning and experience, and have come closer to understanding the emotional aspects of learning encounters. I have questioned and rejected a distanced and objective approach to describing learning and teaching/counselling. I have argued for a holistic and experiential approach to (E)FL encounters in which there is a need to see emotion and cognition as intertwined, and thus to appreciate learners and counsellors emotionally-charged experiences as integral to their identities. I have also argued for a way of describing such encounters as they are situated in history, time, autobiography, and the learning context. I have turned my gaze on various constellations of lived experience: the data was collected on various occasions and in various settings during one course and consists of videotaped group sessions, individual counselling sessions between students and their group counsellor, biographic narrative interviews with myself, open-ended personally-inspired reflection texts written by the students about their language-learning histories, and student logs and diaries. I do not consider data collection an unproblematic occasion, or innocent practice, and I defend the integrity of the research process. Research writing cannot be separated from narrative field work and analysing and interpreting the data. The foci in my work have turned to be the following: 1) describing ALMS encounters and specifying their narrative aspects; 2) reconceptualising learner and teacher autonomy in ALMS and in (E)FL; 2) developing (E)FL methodologically through a teacher-researcher s identity work; 4) research writing as a dialogical narrative process, and the thesis as an experiential narrative. Identity and writing as inquiry, and the deeply narrative and autobiographical nature of the (E)FL teaching/counselling/researching have come to the fore in this research. Research writing as a relational activity and its implications for situated ways of knowing and knowledge turned out to be important foci. I have also focussed on the context-bound and local teacher knowledge and ways of knowing about being a teacher, and I have argued for personal ways of knowing about, and learning and studying foreign languages. I discuss research as auto/biography: as a practising counsellor I use my own life and (E)FL experience to understand and interpret the stories of the research participants even though I was not involved in their course work. The supposedly static binaries of learner/teacher, and also learner autonomy/teacher autonomy, are thus brought into the discussion. I have highlighted the infinite variability and ever-changing nature of learning and teaching English, but the book is also of relevance to foreign language education in general.

Grand Push Auto: A car based exertion game

Grand Push Auto is an exertion game in which players aim to push a full sized car to ever increasing speeds. The re-appropriation of a car as essentially a large weight allows us to create a highly portable and distributable exertion game in which the main game element has a weight of over 1000 kilograms. In this paper we discuss initial experiences with GPA, and present 3 questions for ongoing study which have been identified from our early testing: How might we appropriate existing objects in exertion game design, and does appropriation change how we think about these objects in different contexts, for example environmental awareness? How does this relate to more traditional sled based weight training? How can we create exertion games that allow truly brutal levels of force?

Low Temperature Synthesis of Nano-Crystalline CaCu3Ti4O12 Through aFuel Mediated Auto-Combustion Pathway

A novel, cost effective,environment-friendly and energetically beneficial alternative method for the synthesis of giant dielectric pseudo-perovskite material CaCu3Ti4O12 (CCTO) is presented. The method involved auto-combustion of an aqueous precursor solution in oxygen atmosphere with the help of external fuels and is capable of producing high amount of CCTO at ultra-low temperature, in the combustion residue itself. The amount of phase generated was observed to be highly dependent on the combustion process i.e. on the nature and amount of external-fuels added for combustion. Two successful fuel combinations capable of producing reasonably higher amount of the desired compound were investigated. On a structural characterization grain size was observed to decrease drastically to nano-dimension compared to submicron-size that was obtained in a traditional sol-gel combustion and subsequent cacination method. Therefore, the method reported can produce nano-crystalline CaCu3Ti4O12 ceramic matrix at an ultra-low temperature and is expected to be applicable for other multifunctional perovskite oxide materials.

A novel property of an Auto-Correlation Sequence and some Applications

In this article, we use some spectral properties of polynomials presented in 1] and map an auto-correlation sequence to a set of Line Spectral Frequencies(LSFs) and reflection coefficients. This novel characterization of an auto-correlation sequence is used to obtain a lattice structure of a Linear-Phase(LP) FIR filter.

Recent advances in auto exhaust catalysis

In last 30 years innovative research in the area of auto exhaust catalysis is being developed and CeO2 has been found to play a major role in this area due to its unique redox properties. In this review, auto exhaust emission and its impact on earth’s environment, global concern and recent advances in science and technology in automotive exhaust catalysis have been documented. A new preparative method of dispersing metal ions by solution combustion technique over CeO2 and TiO2 resulting mainly Ce1−xMxO2−δ, Ti1−xMxO2−δ and Ce1−x−yTixMyO2−δ (M = Pd, Rh and Pt) catalysts, structure of these materials, their catalytic properties towards auto exhaust catalysis, structure–property relation and mechanism of catalytic reactions are accounted here. In these materials, metal ions are incorporated into substrate matrix to a certain limit in the solid solution form and we have established a new direction in heterogeneous catalysis by turning to the concept of dispersed metal ions as catalytically active sites from the conventionally nurtured idea of metal particles as active centers for catalysis.

Auto-ignition based synthesis of Y2O3 for photo- and thermo-luminescent applications

We present a simple route for synthesis of Y2O3 for both photoluminescent (PL) and thermoluminescent (TL) applications. We show that by simply switching the fuel from ethylene di-amine tetracetic acid (EDTA) to its disodium derivative (Na-2-EDTA), we obtain a better photoluminescent material. On the other hand, use of EDTA aids in formation of Y2O3 which is a better thermoluminescent material. In both cases pure cubic nano-Y2O3 is obtained. For both the material systems, structural characterization, photoluminescence, thermoluminescence, and absorbance spectra are reported and analyzed. Use of EDTA results in nano Y2O3 with crystallite size similar to 10 nm. Crystallinity improves, and crystallite size is larger (similar to 30 nm) when Na-2-EDTA is used. TL response of Y2O3 nanophosphors prepared by both fuels is examined using UV radiation. Samples prepared with EDTA show well resolved glow curve at 140 degrees C, while samples prepared with Na-2-EDTA shows a glow curve at 155 degrees C. Effect of UV exposure time on TL characteristics is investigated. The TL kinetic parameters are also calculated using glow curve shape method. Results indicate that the TL behavior of both the samples follow a second order kinetic model. (C) 2013 Elsevier B.V. All rights reserved.

DC-Bias-Superposition Characteristics of Ni0.4Zn0.2Mn0.4Fe2O4 Nanopowders Synthesized by Auto-Combustion

Ni0.4Zn0.2Mn0.4Fe2O4 nanopowders were prepared by auto-combustion method. The as-synthesized powders were characterized using X-ray diffraction (XRD) and thermo-gravimetric-differential thermal analysis (TG-DTA), and the powders were densified at different temperatures 400 degrees C, 500 degrees C, 600 degrees C and 700 degrees C/4 hrs using conventional sintering method. The sintered samples were characterized by XRD and transmission electron microscope (TEM). The bulk densities of the samples were increased with an increase of sintering temperature. The grain sizes of all the samples vary in between 18 nm to 30 nm. The hysteresis loops show high saturation magnetization and low coercivity, indicates that it is a soft material. The incremental permeability (permeability with magnetic field superposition) was influenced by both Delta M and H-c. A sample with higher initial permeability and favoured the attainment of a higher incremental permeability. The Q-factor was mainly determined by the sintered density and microstructure. To summarize, a uniform and dense microstructure with relatively small average grain size is favourable for obtaining better dc-bias-superposition characteristics, including permeability and Q-factor.

One pot auto-ignition based synthesis of novel Sr2CeO4: Ho3+ nanophosphor for photoluminescent applications

Ho3+ (0.25-7 mol%) doped Sr2CeO4 nanophosphors were synthesized by solution combustion method using urea as fuel. The structural properties of the nanophosphors were investigated by powder X-ray diffraction studies (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. UV-Visible and photoluminescence (PL) spectroscopic techniques were used for analysing the optical properties of the nanoparticles. PXRD and TEM results revealed the formation of Sr2CeO4: Ho3+ nanocrystalline particles with orthorhombic crystal structure. From the UV-Vis studies the optical band gap energy found to decrease from 5.9 to 5.74 eV with increase in dopant concentration. The PL spectra exhibit the broad excitation band from 200 to 400 nm which concurs well with the commercial near UV LED. The PL spectra vary with the dopant content due to energy transfer from the host to the activator. In this present work we demonstrate that color tuning of phosphor can be achieved by merely varying the Ho3+ ions concentration. The CIE and CCT chromaticity coordinates suggests Sr2CeO4: Ho3+ nanophosphors may be potentially applicable as promising single - phased phosphors for lighting applications. (C) 2015 Elsevier B.V. All rights reserved.

Liberalismo, neutralidad estatal y perfeccionismo : Rawls y su crítica

Resumen: Este artículo expone ciertos ejes del debate contemporáneo en torno al liberalismo político y la neutralidad estatal para intentar una recapitulación crítica que permita arrojar luz sobre la posibilidad de una posición que concilie el respeto a la pluralidad contemporánea y a ciertos principios constitucionales con la no abdicación del rol que la política debe tener en el fomento de la “vida buena” (lo que en la tradición de la filosofía política anglosajona se ha designado como “perfeccionismo”). El artículo explora, al menos preliminarmente, sobre qué premisas se asentaría dicha conciliación, a través del análisis de la justificación del “perfeccionismo” y del tratamiento del tema del paternalismo estatal, la coerción y el fomento. Se analizan las ideas de Rawls así como las de algunos de sus críticos, en especial de Sandel y – sobre todo– de Raz, dado que es un autor que abre las puertas a la posibilidad de un liberalismo “perfeccionista”, fiel a los principios del liberalismo político clásico, pero que abandona la exigencia de “neutralidad” ante distintas concepciones del bien.

Un caso de auto-reescritura : El astrólogo fingido de Calderón

Resumen: La pulcra edición de la Segunda parte de comedias de Pedro Calderón de la Barca por Santiago Fernández Mosquera (Biblioteca Castro, 2007) y la reciente tesis de Fernando Rodríguez-Gallego (2009) sobre las dos versiones de El astrólogo fingido (Zaragoza, 1632 y Madrid, 1637) obligan hoy a una revisión de uno de los casos, tan frecuentes en la producción del dramaturgo madrileño, de reescritura —con miras esta vez a la publicación impresa— de una de sus obras. El examen se centrará, más allá de consideraciones formales y estéticas, en la valoración del alcance ético de las profundas transformaciones sufridas por el personaje del primer protagonista, el falso astrólogo, don Diego de Luna, así como en el análisis de las dos versiones del desenlace.