Monoamine oxidase B layer-by-layer film fabrication and characterization toward dopamine detection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Platinum nanoparticles incorporated in silsesquioxane for use in LbL films for the simultaneous detection of dopamine and ascorbic acid

We describe the preparation of platinum nanoparticles (PtNPs) using the 3-n-propylpyridinium silsesquioxane chloride (SiPy+Cl-) as a nanoreactor and stabilizer. The formation of PtNPs was monitored by UV-Vis spectroscopy by measuring the decrease in the intensity of the band at 375 nm, which is attributed to the electronic absorption of PtCl62- ions. TEM images of Pt-SiPy+Cl- nanohybrid indicated an average size of 3-40 nm for PtNPs. The Pt-SiPy+Cl- was used as a polycation in the preparation of layer-by-layer films (LbL) on a glass substrate coated with fluorine-doped tin oxide (FTO) alternating with the polyanion poly(vinyl sulfonic acid) (PVS). The films were electrochemically tested in sulfuric acid to confirm the deposition of Pt-SiPy+Cl- onto the LbL films, observing the adsorption and desorption of hydrogen (E-pa = 0.1 V) and by the redox process of formation for PtO with E-pa = 1.3 V and E-pc = 0.65 V. FTIR and Raman spectra confirmed the presence of the PVS and Pt-SiPy+Cl- in the LbL films. A linear increase in the absorbance in the UV-Vis spectra of the Pt-SiPy+Cl- at 258 nm (pi -> pi* transition of the pyridine groups) with a number of Pt-SiPy+Cl-/PVS or PVS/SiPy+Cl- bilayers (R = 0.992) was observed. These LbL films were tested for the determination of dopamine (DA) in the presence of ascorbic acid (AA) with a detection limit (DL) on the order of 2.6 x 10(-6) mol L-1 and a quantification limit (QL) of 8.6 x 10(-6) mol L-1. The films exhibited a good repeatability and reproducibility, providing a potential difference of 550 mV for the oxidation of DA with AA interferent.

Self-Assembly of Poly(4-vynil-N-alkylpyridinium) Bromide onto Silica: Effect of Side-Chain Length on Structural Aspects at a Molecular Level

Self-assembly of poly(4-vynil-N-alkyl)pyridinium bromide with alkyl side chains of 2, 5, 7, 10, or 16 carbons from ethanolic solutions onto flat silica surfaces was studied by means of ellipsometry, atomic force microscopy (AFM), contact angle measurements, and sum-frequency generation (SFG) vibrational spectroscopy in the CH3 and CH2 stretch region. Ab initio quantum-chemical calculations on the N-alkylpyridinium side-group with restricted Hartree-Fock (RHF) method and 6-311G (d,p) basis set were C one to estimate the charge distribution along the pyridinium ring and the alkyl side-chain. SFG results showed that longer side chains promote the disorientation of the alkyl groups at the surface, corroborating with the contact angle values. AFM images revealed film homogeneity, regardless the alkyl side group. However, after 24 h contact with water, ringlike structures appeared on the film surfaces, when the polycation alkyl side chain had 7 or less carbons, and as the alkyl chain increased to 10 or 16 carbons, the films dewetted because the hydrophobic interactions prevailed over the electrostatic interactions between the pyridinium charged groups and the negatively charged SiO2 surface. Under acid conditions (HCl 0.1 mol.L-1), the film mean thickness values decreased up to 50% of original values when the alkyl side chains were ethyl or pentyl groups due to ion-pair disruption, but for longer groups they remained unchanged. Quantum-chemical optimization and Mulliken electron population showed that (i) from C2 to C15 the positive charge at the headgroup (HG) decreased 0.025, while the charge at combined HG + alpha-CH2 increased 0.037; and (ii) for C6 or longer, the alkyl side group presents a tilt in the geometry, moving away from the plane. Such effects summed up over the whole polymer chain give support to suggest that when the side chains are longer than 7 carbons, the hydrophobic interaction decreases film stability and increases acid resistance.

Flüssigkristalline Ionomere zum Aufbau von Multischichtstrukturen

Die vorliegende Arbeit beschäftigt sich mit der Synthese und Charakterisierung von nematischen und smektischen LC-Polyestern, die mit ionischen Gruppen funktionalisiert wurden. Als ionische Gruppen wurden Phosphonsäure-salze und Phosphonium- oder Ammoniumgruppen verwendet. Je nach Polymerrückgrat erhält man LC-Ionomere, bei denen die ionischen Gruppen entweder an das Mesogen oder an den Hauptkettenspacer gebunden sind. Diese LC-Ionomere können zusammen mit amorphen Polyelektrolyten oder anorganischen Schichtmineralien für den Multischichtaufbau durch alternierende Adsorption von Polykation und Polyanion aus der Lösung verwendet werden (Methode von G. Decher). Die Multischichtbildung konnte mittels UV-Spektroskopie, IR-Spektroskopie, Kontaktwinkel-Messungen, Röntgenreflexionsmessungen und Oberflächen Plasmonen-Spektroskopie verfolgt werden. Die Subschichten sind zwischen 25 und 55 Å dick und hängen z.B. von der Polarität des Lösungsmittels ab. Erste cis-trans Isomerisierungen und Photoorientierungs-Versuche wurden durchgeführt.

Interpolyelektrolytkomplexe zylindrischer Bürstenpolymere

Die elektrostatische Wechselwirkung zwischen entgegengesetzt geladenen Polyelektrolyten führt zur spontanen Bildung von Interpolyelektrolytkomplexen. Besonders im Fokus des akademischen und biotechnologischen Interesses stehen derzeit Komplexe aus DNA und synthetischen Polykationen, da eine Anwendung dieser speziellen Interpolyelektrolytkomplexe in der nicht-viralen Gentherapie vielfältig diskutiert wird. Ziel der vorliegenden Arbeit war es, den Einfluss von Kettensteifheit auf die Bildung von Interpolyelektrolytkomplexen zu untersuchen und dabei Wege aufzuzeigen, die eine Kontrolle der Topologie von Interpolyelektrolytkomplexen ermöglichen. Neben dem topologischen Einfluss wurde untersucht, wie durch Komplexierung hochmolekularer Polyelektrolyte equilibrierbare Strukturen erhalten werden können. Als Modellsystem für diese Untersuchungen wurden zylindrische Bürstenpolymere verwendet, denen als topologischer „Kontrast“ das Komplexierungsverhalten kommerzieller PAMAM-G5-Dendrimere mit kugelförmiger Topologie gegenüber gestellt wurde. Um den Ladungsgrad des Bürstenpolymers beliebig variieren zu können, wurden Bürstenpolymere mit Poly(ethylenimin)-Seitenketten synthetisiert, deren Ladungsdichte über den Protonierungsgrad einstellbar ist. Die vorliegende Arbeit zeigt, wie diese mit Hilfe der Makromonomermethode hergestellt werden konnten. Die Komplexbildung von DNA mit semiflexiblen zylindrischen Bürstenpolymeren mit unterschiedlichen Seitenketten und Ladungsdichten in wässriger Lösung hat gezeigt, dass diese in allen untersuchten Fällen unter kinetischer Kontrolle verläuft und Nicht-Gleichgewichtsstrukturen gebildet werden. Sehr überraschend wurde festgestellt, dass die Größen der mit vorgelegter DNA gebildeten Komplexe ungeachtet des verwendeten Polykations identisch sind und DNA-Komplexe mit einem Radius von 30 bis 50 nm und einer kugelförmigen Topologie resultieren. Diese kinetisch kontrollierte Komplexbildung konnte in nicht-wässriger Lösung durch starke Reduktion der Anzahl wechselwirkender Ladungen verhindert werden, so dass eine thermodynamische Kontrolle möglich wurde. Unter diesen Bedingungen ist es gelungen, aus hochgeladenen Poly(styrolsulfonat)-Bürsten mit modifizierten Poly(ethylenimin)-Bürsten oder PAMAM-Dendrimeren Komplexe zylindrischer Topologie herzu-stellen. Für letztere konnte darüber hinaus postuliert werden, dass diese Komplexe eine dichteste Packung der PAMAM-Dendrimere darstellen, für deren Bildung das Polyanion mit seiner größeren Konturlänge und seiner zylindrischen Topologie als Templat dient.

Synthese und Charakterisierung von multivalenten kationischen Tensiden und Polymeren

Der Einsatz von den Polyelektrolytkomplexen von DNA / RNA mit Polykationen oder Lipiden in der Gen-Therapie ist für Wissenschaftler von besonderem Interesse, da sie als Träger für den Transport von genetischem Material in lebende Zellen fungieren können. Interessant ist auch die Komplexbildung aus Gadolinium und Polykation, hier können die stabil gebildeten Aggregate als Kontrastmittel zur Anwendung in der Magnetresonanztomographie eingeführt werden. Ziel der vorliegenden Arbeit war es, strukturdefinierte, positiv geladene, polyvalente sperminanaloge Polymere zu synthetisieren. Durch die polyelektrolytische Natur erlauben solche Polymere die Komplexierung von mehr Gadolinium-Polyoxometalaten und wären deshalb sehr gut als Kontrastmittel geeignet. Aufbauend auf den Vorarbeiten, wurde insbesondere die Komplexbildung von kationischem Polymer mit der Green Fluorescent Protein DNA in physiologischem Salzgehalt untersucht. Die Beschreibung der Synthese im Rahmen dieser Arbeit zeigt, dass es mit dem entwickelten Syntheseprinzip, also unter Einsatz von orthogonaler Schutzgruppenchemie und funktionaler Transformation gelungen ist, durch einfache nukleophile Substitution die Kopplung der Elementareinheiten zu komplexeren, auch ionischen Tensiden durchzuführen. Die Komplexierung von Gadolinium-Polyoxometalat mit kationisch geladenem Polymer in reinem Wasser und in physiologischem Salzgehalt hat gezeigt, dass bei einem Ladungsverhältnis von ungefähr 2:1 stabile sphärische Komplexe gebildet werden. HeLa-Zellen zeigen keine hohe Empfindlichkeit gegenüber Polykation-POM-Komplexen, da deren toxische Wirkung nur einen Anteil toter Zellen von maximal 24 % zur Folge hatte. Die Bildqualität einer MRT-Aufnahme der gebildeten Polykation-POM-Komplexe wurde im Vergleich zu den reinen Gadolinium-Polyoxometalat-Lösungen erheblich verbessert. Die Komplexierung von DNA mit dem im Überschuss vorliegenden kationisch geladenen Polymer wurde mittels Rasterkraftmikroskopie, statischer sowie dynamischer Lichtstreuung untersucht. Die Molmasse und Größe der Polykation-DNA-Komplexe geben eindeutige Hinweise darauf, dass sich in physiologischer Salzlösung Multi-Ketten-Komplexe bilden. Neben der Untersuchung der Polymer-Komplexe wurde eine Reihe neuartiger multivalenter kationischer Tenside hergestellt, wobei ihre Eigenschaften beispielsweise mit Tensid B (C12N4), Tensid C (EG8N4) und Tensid F (EG8C12N4) in wässriger Lösung bei verschiedener Salzkonzentration im Vordergrund stehen.

Formation of DNA complexes in aqueous and organic solvents

From a physical-chemical point of view, it is challenging to form complexes with polyelectrolytes, consisting of only molecule of the largest component, i.e. the component with the highest number of charges. In this study, complexes are formed with DNA because of its potential applications as an artificial vector for gene delivery. The aim of this work is to prepare complexes in aqueous solutions as well as in organic solvents containing only one DNA molecule. For this purpose, the topology, equilibrium and conformation of complexes between a supercoiled DNA pUC19 (2686 base pairs) and spermine containing hydrophilic and/or hydrophobic moieties or a polylysine with a hydrophilic block are determined by means of dynamic (DLS) and static light scattering (SLS), atomic force microscopy (AFM), and circular dichroism (CD) spectroscopy. It is demonstrated that all of these complexes consisted of only one molecule of the polyanion. Only the polylysine-b-polyethylene glycol copolymer satisfied the conditions: 1) 100% neutralization of DNA charges and with a small excess of the cation (lower than 30%) and 2) form stable complexes at every charge ratio. rnDNA complex formation is also investigated in organic solvents. Precipitation is induced by neutralizing the charge of the supercoiled DNA pUC19 with the surfactants dodecyltrimethylammonium bromide (DTAB) and tetradecyltrimethylammonium bromide (TTAB). After isolation and drying of the solids, the complexes are dissolved in organic solvents. DNA-TTA complexes are only soluble in methanol and DNA-DTA in DMF. The complexes again consisted of only one DNA molecule. The final topology of the complexes is different in methanol than in DMF. In the former case, DNA seems to be compacted whereas in the latter case, the DNA-DTA complexes seem to have an expanded conformation. Upon complex formation with polycations in organic solvents (with polyvilylpyridine brush (b-PVP) in methanol and with a protected polylysine in DMF), DNA aggregates and precipitates. rnDNA is linearized with an enzyme (SmaI) to investigate the influence of the initial topology of the polyanion on the final conformation of the complexes in organic solvents. Two main differences are evidenced: 1. Complexes in organic solvents formed with linear DNA have in general a more expanded conformation and a higher tendency to aggregate. 2. If a polycation, i.e. the b-PVP, is added to the linear DNA-TTA complexes in methanol, complexes with the polycation are formed at a higher charge ratio. In DMF, the addition of the same b-PVP and of b-PLL did not lead to the formation of complexes.rn

RB-mediated suppression of spontaneous multiple neuroendocrine neoplasia and lung metastases in Rb+/− mice

Alterations in pathways mediated by retinoblastoma susceptibility gene (RB) product are among the most common in human cancer. Mice with a single copy of the Rb gene are shown to develop a syndrome of multiple neuroendocrine neoplasia. The earliest Rb-deficient atypical cells were identified in the intermediate and anterior lobes of the pituitary, the thyroid and parathyroid glands, and the adrenal medulla within the first 3 months of postnatal development. These cells form gross tumors with various degrees of malignancy by postnatal day 350. By age of 380 days, 84% of Rb+/− mice exhibited lung metastases from C-cell thyroid carcinomas. Expression of a human RB transgene in the Rb+/− mice suppressed carcinogenesis in all tissues studied. Of particular clinical relevance, the frequency of lung metastases also was reduced to 12% in Rb+/− mice by repeated i.v. administration of lipid-entrapped, polycation-condensed RB complementary DNA. Thus, in spite of long latency periods during which secondary alterations can accumulate, the initial loss of Rb function remains essential for tumor progression in multiple types of neuroendocrine cells. Restoration of RB function in humans may prove an effective general approach to the treatment of RB-deficient disseminated tumors.

Approaches to enhancing the retroviral transduction of human synoviocytes

This report concerns a clinical trial for rheumatoid arthritis (RA), approved by the US National Institutes of Health and the Food and Drug Administration. An amphotropic retrovirus (MFG-IRAP) was used ex vivo to transfer a cDNA encoding human interleukin-1 receptor antagonist (IL-1Ra) to synovium. The protocol required the transduced cells to secrete at least 30 ng IL-1Ra/106 cells per 48 h before reimplantation. Here we have evaluated various protocols for their efficiency in transducing cultures of human rheumatoid synoviocytes. The most reliably efficient methods used high titer retrovirus (approximately 108 infectious particles/ml). Transduction efficiency was increased further by exposing the cells to virus under flow-through conditions. The use of dioctadecylamidoglycylspermine (DOGS) as a polycation instead of Polybrene (hexadimethrine bromide) provided an additional small increment in efficiency. Under normal conditions of static transduction, standard titer, clinical grade retrovirus (approximately 5 × 105 infectious particles/ml) failed to achieve the expression levels required by the clinical trial. However, the shortfall could be remedied by increasing the time of transduction under static conditions, transducing under flow-through conditions, or transducing during centrifugation.

Design and synthesis of ribonucleic guanidine: a polycationic analog of RNA.

Replacement of the phosphodiester linkages of the polyanion RNA with guanidinium linkers (represented by g) provides the polycation ribonucleic guanidine (RNG). An anticipated structure for the triple-helical hybrid [r(Up)9U.r(Ag)9A.r(Up)9U] is presented. A basic strategy for the synthesis of RNG oligomers is described. Synthetic procedures are provided for tetrameric adenosyl RNG [r(Ag)3A].

A versatile vector for gene and oligonucleotide transfer into cells in culture and in vivo: polyethylenimine.

Several polycations possessing substantial buffering capacity below physiological pH, such as lipopolyamines and polyamidoamine polymers, are efficient transfection agents per se--i.e., without the addition of cell targeting or membrane-disruption agents. This observation led us to test the cationic polymer polyethylenimine (PEI) for its gene-delivery potential. Indeed, every third atom of PEI is a protonable amino nitrogen atom, which makes the polymeric network an effective "proton sponge" at virtually any pH. Luciferase reporter gene transfer with this polycation into a variety of cell lines and primary cells gave results comparable to, or even better than, lipopolyamines. Cytotoxicity was low and seen only at concentrations well above those required for optimal transfection. Delivery of oligonucleotides into embryonic neurons was followed by using a fluorescent probe. Virtually all neurons showed nuclear labeling, with no toxic effects. The optimal PEI cation/anion balance for in vitro transfection is only slightly on the cationic side, which is advantageous for in vivo delivery. Indeed, intracerebral luciferase gene transfer into newborn mice gave results comparable (for a given amount of DNA) to the in vitro transfection of primary rat brain endothelial cells or chicken embryonic neurons. Together, these properties make PEI a promising vector for gene therapy and an outstanding core for the design of more sophisticated devices. Our hypothesis is that its efficiency relies on extensive lysosome buffering that protects DNA from nuclease degradation, and consequent lysosomal swelling and rupture that provide an escape mechanism for the PEI/DNA particles.

Synthesis of a thymidyl pentamer of deoxyribonucleic guanidine and binding studies with DNA homopolynucleotides.

Replacement of the phosphodiester linkages of the polyanion DNA with guanidine linkers provides the polycation deoxynucleic guanidine (DNG). The synthesis of pentameric thymidyl DNA is provided. This polycationic DNG species binds with unprecedented affinity and with base-pair specificity to negatively charged poly(dA) to provide both double and triple helices. The dramatic stability of these hybrid structures is shown by their denaturation temperatures (Tm). For example, the double helix of the pentameric thymidyl DNG and poly(dA) does not dissociate in boiling water (ionic strength = 0.12), whereas the Tm for pentameric thymidyl DNA associated with poly(dA) is approximately 13 degrees C (ionic strength = 0.12). The effect of ionic strength on Tm for DNG complexes with DNA shows an opposite correlation compared with double-stranded DNA and is much more dramatic than for double-stranded DNA.

Structure, dynamics, and energetics of siRNA-cationic vector complexation:a molecular dynamics study

The design and synthesis of safe and efficient nonviral vectors for gene delivery has attracted significant attention in recent years. Previous experiments have revealed that the charge density of a polycation (the carrier) plays a crucial role in complexation and the release of the gene from the complex in the cytosol. In this work, we adopt an atomistic molecular dynamics simulation approach to study the complexation of short strand duplex RNA with six cationic carrier systems of varying charge and surface topology. The simulations reveal detailed molecular-level pictures of the structures and dynamics of the RNA-polycation complexes. Estimates for the binding free energy indicate that electrostatic contributions are dominant followed by van der Waals interactions. The binding free energy between the 8(+)polymers and the RNA is found to be larger than that of the 4(+)polymers, in general agreement with previously published data. Because reliable binding free energies provide an effective index of the ability of the polycationic carrier to bind the nucleic acid and also carry implications for the process of gene release within the cytosol, these novel simulations have the potential to provide us with a much better understanding of key mechanistic aspects of gene-polycation complexation and thereby advance the rational design of nonviral gene delivery systems.

Structure and dynamics of multiple cationic vectors-siRNA complexation by all-atomic molecular dynamics simulations

Understanding the molecular mechanism of gene condensation is a key component to rationalizing gene delivery phenomena, including functional properties such as the stability of the gene-vector complex and the intracellular release of the gene. In this work, we adopt an atomistic molecular dynamics simulation approach to study the complexation of short strand duplex RNA with four cationic carrier systems of varying charge and surface topology at different charge ratios. At lower charge ratios, polymers bind quite effectively to siRNA, while at high charge ratios, the complexes are saturated and there are free polymers that are unable to associate with RNA. We also observed reduced fluctuations in RNA structures when complexed with multiple polymers in solution as compared to both free siRNA in water and the single polymer complexes. These novel simulations provide a much better understanding of key mechanistic aspects of gene-polycation complexation and thereby advance progress toward rational design of nonviral gene delivery systems.

The use of amino acids to enhance the aerosolisation of spray-dried powders for pulmonary gene therapy

Background Pulmonary delivery of gene therapy offers the potential for the treatment of a range of lung conditions, including cystic fibrosis, asthma and lung cancer. Spray-drying may be used to prepare dry powders for inhalation; however, aerosolisation of such powders is limited, resulting in poor lung deposition and biological functionality. In this study, we examine the use of amino acids (arginine, aspartic acid, threonine, phenylalanine) to enhance the aerosolisation of spray-dried powders containing model non-viral gene vectors. Methods Lipid/polycation/pDNA (LPD) vectors, in the presence or absence of amino acids, were dispersed in lactose solutions, and spray-dried to produce appropriately sized dry powders. Scanning electron microscopy and laser diffraction were used to determine particle morphology and diameter, respectively. Gel electrophoresis was used to examine the influence of amino acids on the structural integrity of the LPD complex. In vitro cell (A.549) transfection was used to determine the biological functionality of the dry powders, and the in vitro aerosolisation performance was assessed using a multistage liquid impinger (MSLI). Results Both gel electrophoresis and in vitro cell transfection indicated that certain amino acids (aspartic acid, threonine) can adversely affect the integrity and biological functionality of the LPD complex. All amino acids significantly increased the aerosolisation of the powder, with the arginine and phenylalanine powders showing optimal deposition in the lower stages of the MSLI. Conclusions Amino acids can be used to enhance the aerosolisation of spray-dried powders for respiratory gene delivery, allowing the development of stable and viable formulations for pulmonary gene therapy.