The effect of resource aggregation at different scales: Optimal foraging behavior of Cotesia rubecula

Resources can be aggregated both within and between patches. In this article, we examine how aggregation at these different scales influences the behavior and performance of foragers. We developed an optimal foraging model of the foraging behavior of the parasitoid wasp Cotesia rubecula parasitizing the larvae of the cabbage butterfly Pieris rapae. The optimal behavior was found using stochastic dynamic programming. The most interesting and novel result is that the effect of resource aggregation within and between patches depends on the degree of aggregation both within and between patches as well as on the local host density in the occupied patch, but lifetime reproductive success depends only on aggregation within patches. Our findings have profound implications for the way in which we measure heterogeneity at different scales and model the response of organisms to spatial heterogeneity.

Technical, allocative, cost and scale efficiencies in Bangladesh rice cultivation: A non-parametric approach

Applying programming techniques to detailed data for 406 rice farms in 21 villages, for 1997, produces inefficiency measures, which differ substantially from the results of simple yield and unit cost measures. For the Boro (dry) season, mean technical efficiency was efficiency was 56.2 per cent and 69.4 per cent, allocative efficiency was 81.3 per cent, cost efficiency was 56.2 per cent and scale efficiency 94.9 per cent. The Aman (wet) season results are similar, but a few points lower. Allocative inefficiency is due to overuse of labour, suggesting population pressure, and of fertiliser, where recommended rates may warrant revision. Second-stage regressions show that large families are more inefficient, whereas farmers with better access to input markets, and those who do less off-farm work, tend to be more efficient. The information on the sources of inter-farm performance differentials could be used by the extension agents to help inefficient farmers. There is little excuse for such sub-optimal use of survey data, which are often collected at substantial costs.

An efficient method for optimal location and sizing of fixed and switched shunt capacitors in large distribution systems

This paper proposes a computationally efficient methodology for the optimal location and sizing of static and switched shunt capacitors in large distribution systems. The problem is formulated as the maximization of the savings produced by the reduction in energy losses and the avoided costs due to investment deferral in the expansion of the network. The proposed method selects the nodes to be compensated, as well as the optimal capacitor ratings and their operational characteristics, i.e. fixed or switched. After an appropriate linearization, the optimization problem was formulated as a large-scale mixed-integer linear problem, suitable for being solved by means of a widespread commercial package. Results of the proposed optimizing method are compared with another recent methodology reported in the literature using two test cases: a 15-bus and a 33-bus distribution network. For the both cases tested, the proposed methodology delivers better solutions indicated by higher loss savings, which are achieved with lower amounts of capacitive compensation. The proposed method has also been applied for compensating to an actual large distribution network served by AES-Venezuela in the metropolitan area of Caracas. A convergence time of about 4 seconds after 22298 iterations demonstrates the ability of the proposed methodology for efficiently handling large-scale compensation problems.

Full-scale biological phosphorus removal: quantification of storage polymers, microbial performance and metabolic modelling

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Contributo para a validação da versão portuguesa da Quebec Back Pain Disability Scale : fiabilidade e poder de resposta em utentes com dor lombar crónica

RESUMO: Um dos principais resultados das intervenções de Fisioterapia dirigidas a utentes com Dor Lombar Crónica (DLC) é reduzir a incapacidade funcional. A Quebec Back Pain Disability Scale (QBPDS) é um instrumento amplamente aceite a nível internacional na medição do nível de incapacidade funcional reportada pelos indivíduos com DLC. O objetivo deste estudo é dar um contributo para a adaptação cultural da versão portuguesa da QBPDS (QBPDS-VP) e investigar o poder de resposta e interpretabilidade da escala. Metodologia: Realizou-se um estudo metodológico, multicentro, baseado num coorte prospetivo de 132 utentes com DLC. Os utentes foram recrutados a partir da lista de espera de 16 serviços de Medicina Física e de Reabilitação/Fisioterapia de várias áreas geográficas de Portugal. A QBPDS- VP foi administrada 3 vezes, em 3 momentos de recolha de dados distintos: T0 - momento inicial (utentes em lista de espera); T1 - 1 semana de intervalo (início dos tratamentos de Fisioterapia); e T2 - 6 semanas de intervalo (pós-intervenção de Fisioterapia). Os dados recolhidos em T0 foram utilizados para a análise fatorial e para o estudo da consistência interna (n=132); os dados da amostra emparelhada de T0 e T1 (n=132) para a fiabilidade teste-reteste; e os dados da amostra emparelhada de T0 e T2 (n=120) para a análise do poder de resposta e interpretabilidade. A âncora externa utilizada foi a perceção global de mudança, neste caso a PGIC- VP, que foi respondida em T1 e T2. O nível de significância para o qual os valores se consideraram satisfatórios foi de p≤ 0,05. O tratamento dos dados foi realizado no software IBM SPSS Statistics (versão 20). Resultados: A QBPDS- VP é uma escala unidimensional, que revela uma excelente consistência interna (α de Cronbach= 0,95) e uma fiabilidade teste-reteste satisfatória (CCI= 0,696; IC 95%: 0,581–0,783). Esta escala demonstrou um poder de resposta moderado, quando aplicada em utentes com DLC ( = 0,426 e AAC= 0,741; IC 95%: 0,645 – 0,837). A Diferença Mínima Detetável (DMD) estimada foi de 19 pontos e as estimativas da Diferença Mínima Clinicamente Importante (DMCI) variaram entre 7 (pelo método curva ROC) e 8 pontos (pelo método “diferença média de pontuação”). A estimativa pela curva ROC deriva do ponto ótimo de corte de 6,5 pontos, com Área Abaixo da Curva (AAC)= 0,741, sensibilidade de 72%, e especificidade de 71%. Uma análise complementar da curva ROC baseada nas diferenças de pontuações da QBPDS, expressa em percentagem, revelou um ponto ótimo de corte de - 24% (AAC= 0,737, sensibilidade de 71%, e especificidade de 71%). Para pontuações iniciais da QBPDS- VP mais altas (≥34 pontos), foi encontrado um ponto ótimo de corte de 10,5 pontos (AAC= 0,738, sensibilidade de 73%, e especificidade de 67%). Conclusão: A QBPDS-VP demonstrou bons níveis de fiabilidade e poder de resposta, recomendando-se o seu uso na medição e avaliação da incapacidade funcional de utentes com DLC. A DMD estimada, de 19 pontos, determinou uma amplitude válida da QBPDS-VP de 19 a 81 pontos. Este estudo propõe estimativas de DMCI da QBPDS- VP numa aplicação específica da escala (em utentes com DLC que são referidos para a intervenção de Fisioterapia). A pontuação inicial da QBPDS- VP deve ser considerada na interpretação de mudanças de pontuação, após a intervenção de Fisioterapia.------------ ABSTRACT: One of the main results of physiotherapy interventions for patients with Chronic Low Back Pain (CLBP) is decrease the functional disability. The Quebec Back Pain Disability Scale (QBPDS) is an instrument widely accepted internationally, in measuring the level of disability reported by individuals with CLBP. The purpose of this study is to contribute to the cultural adaptation of the Portuguese version of QBPDS (QBPDS - PV) and investigate the Responsiveness and Interpretability of QBPDS-PV. Methodology: This was a methodological and multicenter study, based on a sample of 132 subjects with CLBP. The patients were recruited from the waiting lists of 16 medicine rehabilitation service, in many Portugal districts. The Quebec Back Pain Disability Scale was administered in three different moments: T0 – baseline (patients in the waiting list); T1- one week after T0 (the beginning of treatment); and T2 – six weeks after T1 (the posttreatment). The data collected at T0 were used for factor analysis and to study the internal consistency (n = 132); paired sample data of T0 and T1 (n=132) were used for test-retest reliability, and sample data paired for T0 and T2 (n=120) used for responsiveness and interpretability analysis. The external anchor was the global perception of change, measured by the Portuguese version of Patient’s Global Impression of Change (PGIC) Scale. The minimal level of significance established was p ≤ 0,05. Data analysis was performed using the IBM SPSS Statistics software (version 20). Results: The QBPDS-PV is a unidimensional scale, demonstrates an excellent internal consistency (Cronbach's α=0.95) and satisfactory test-retest reliability (ICC= 0.696, 95% CI: 0.581–0.783). The scale revealed moderate responsiveness when applied to patients with CLBP ( = 0.426 and AUC= 0.741, 95% CI: 0.645 - 0.837). The Smallest Detectable Change (SDC) was 19 points, whereas the Minimal Clinically Important Change (MCIC) ranged between 7 (ROC curve method) and 8 points (by the "mean difference score"). The estimate was derived from the ROC curve by an optimal cutoff point of 6.5 points, with Area Under the Curve (AUC)= 0.741, sensitivity 72%, and specificity of 71%. A complementary analysis of the ROC curve based on differences in QBPDS scores from baseline, expressed in percentage, revealed an optimal cutoff point of -24% (AUC= 0.737, sensitivity of 71%, and specificity of 71%). For the highest initial scores of QBPDS-PV (≥ 34 points) was found an optimal cutoff of 10.5 points (AUC= 0.738, sensitivity of 73%, and specificity 67%). Conclusion: The QBPDS-PV demonstrated good levels of reliability and responsiveness, being recommended its use in the measurement and evaluation of disability of patients with CLBP. The SDC of 19 points determined the QBPDS‟ scale width of 19 to 81. This study proposes MCIC values for QBPDS –PV for this specific setting (in CLBP patients who are referred for physiotherapy intervention). The QBPDS –PV baseline score have to be taken into account while interpreting the score change after physiotherapy intervention.

Optimal design and operation of compact simulated moving bed processes for enantioseparations

Simulated moving bed (SMB) chromatography is attracting more and more attention since it is a powerful technique for complex separation tasks. Nowadays, more than 60% of preparative SMB units are installed in the pharmaceutical and in the food in- dustry [SDI, Preparative and Process Liquid Chromatography: The Future of Process Separations, International Strategic Directions, Los Angeles, USA, 2002. http://www. strategicdirections.com]. Chromatography is the method of choice in these ¯elds, be- cause often pharmaceuticals and ¯ne-chemicals have physico-chemical properties which di®er little from those of the by-products, and they may be thermally instable. In these cases, standard separation techniques as distillation and extraction are not applicable. The noteworthiness of preparative chromatography, particulary SMB process, as a sep- aration and puri¯cation process in the above mentioned industries has been increasing, due to its °exibility, energy e±ciency and higher product purity performance. Consequently, a new SMB paradigm is requested by the large number of potential small- scale applications of the SMB technology, which exploits the °exibility and versatility of the technology. In this new SMB paradigm, a number of possibilities for improving SMB performance through variation of parameters during a switching interval, are pushing the trend toward the use of units with smaller number of columns because less stationary phase is used and the setup is more economical. This is especially important for the phar- maceutical industry, where SMBs are seen as multipurpose units that can be applied to di®erent separations in all stages of the drug-development cycle. In order to reduce the experimental e®ort and accordingly the coast associated with the development of separation processes, simulation models are intensively used. One impor- tant aspect in this context refers to the determination of the adsorption isotherms in SMB chromatography, where separations are usually carried out under strongly nonlinear conditions in order to achieve higher productivities. The accurate determination of the competitive adsorption equilibrium of the enantiomeric species is thus of fundamental importance to allow computer-assisted optimization or process scale-up. Two major SMB operating problems are apparent at production scale: the assessment of product quality and the maintenance of long-term stable and controlled operation. Constraints regarding product purity, dictated by pharmaceutical and food regulatory organizations, have drastically increased the demand for product quality control. The strict imposed regulations are increasing the need for developing optically pure drugs.(...)

Cost optimal strategies for the renovation of residential neighbourhoods towards energy and emissions neutrality – Rainha Dona Leonor case study

Buildings are one of the major consumers of energy in Europe. This makes them an important target when aiming to reduce the energy consumptions and carbon emissions. The majority of the European building stock has already some decades and so it needs renovation in order to keep its functionality. Taking advantage of these interventions, the energy performance of the buildings may also be improved. In Portugal the renovation techniques, both regarding energy efficiency measures as well as measures for the use of renewable energy sources, are normally planned at the building scale. It is important to explore the possibility of having large scale interventions, has it has been done in other countries, namely at neighbourhood scale with district energy system in order to optimize the results in terms of costs and environmental impact.

Validation of an adapted falls efficacy scale in older rehabilitation patients.

OBJECTIVE: To determine the psychometric properties of an adapted version of the Falls Efficacy Scale (FES) in older rehabilitation patients. DESIGN: Cross-sectional survey. SETTING: Postacute rehabilitation facility in Switzerland. PARTICIPANTS: Seventy elderly persons aged 65 years and older receiving postacute, inpatient rehabilitation. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: FES questions asked about subject's confidence (range, 0 [none]-10 [full]) in performing 12 activities of daily living (ADLs) without falling. Construct validity was assessed using correlation with measures of physical (basic ADLs [BADLs]), cognitive (Mini-Mental State Examination [MMSE]), affective (15-item Geriatric Depression Scale [GDS]), and mobility (Performance Oriented Mobility Assessment [POMA]) performance. Predictive validity was assessed using the length of rehabilitation stay as the outcome. To determine test-retest reliability, FES administration was repeated in a random subsample (n=20) within 72 hours. RESULTS: FES scores ranged from 10 to 120 (mean, 88.7+/-26.5). Internal consistency was optimal (Cronbach alpha=.90), and item-to-total correlations were all significant, ranging from .56 (toilet use) to .82 (reaching into closets). Test-retest reliability was high (intraclass correlation coefficient, .97; 95% confidence interval, .95-.99; P<.001). Subjects reporting a fall in the previous year had lower FES scores than nonfallers (85.0+/-25.2 vs 94.4+/-27.9, P=.054). The FES correlated with POMA (Spearman rho=.40, P<.001), MMSE (rho=.37, P=.001), BADL (rho=.43, P<.001), and GDS (rho=-.53, P<.001) scores. These relationships remained significant in multivariable analysis for BADLs and GDS, confirming FES construct validity. There was a significant inverse relationship between FES score and the length of rehabilitation stay, independent of sociodemographic, functional, cognitive, and fall status. CONCLUSIONS: This adapted FES is reliable and valid in older patients undergoing postacute rehabilitation. The independent association between poor falls efficacy and increased length of stay has not been previously described and needs further investigations.

Risk of type 2 diabetes according to traditional and emerging anthropometric indices in Spain, a Mediterranean country with high prevalence of obesity: results from a large-scale prospective cohort study.

Background: Obesity is a major risk factor for type 2 diabetes mellitus (T2DM). A proper anthropometric characterisation of T2DM risk is essential for disease prevention and clinical risk assessement. Methods: Longitudinal study in 37 733 participants (63% women) of the Spanish EPIC (European Prospective Investigation into Cancer and Nutrition) cohort without prevalent diabetes. Detailed questionnaire information was collected at baseline and anthropometric data gathered following standard procedures. A total of 2513 verified incident T2DM cases occurred after 12.1 years of mean follow-up. Multivariable Cox regression was used to calculate hazard ratios of T2DM by levels of anthropometric variables. Results: Overall and central obesity were independently associated with T2DM risk. BMI showed the strongest association with T2DM in men whereas waist-related indices were stronger independent predictors in women. Waist-to-height ratio revealed the largest area under the ROC curve in men and women, with optimal cut-offs at 0.60 and 0.58, respectively. The most discriminative waist circumference (WC) cut-off values were 99.4 cm in men and 90.4 cm in women. Absolute risk of T2DM was higher in men than women for any combination of age, BMI and WC categories, and remained low in normal-waist women. The population risk of T2DM attributable to obesity was 17% in men and 31% in women. Conclusions: Diabetes risk was associated with higher overall and central obesity indices even at normal BMI and WC values. The measurement of waist circumference in the clinical setting is strongly recommended for the evaluation of future T2DM risk in women.

Robust response transformations based on optimal prediction

Nonlinear regression problems can often be reduced to linearity by transforming the response variable (e.g., using the Box-Cox family of transformations). The classic estimates of the parameter defining the transformation as well as of the regression coefficients are based on the maximum likelihood criterion, assuming homoscedastic normal errors for the transformed response. These estimates are nonrobust in the presence of outliers and can be inconsistent when the errors are nonnormal or heteroscedastic. This article proposes new robust estimates that are consistent and asymptotically normal for any unimodal and homoscedastic error distribution. For this purpose, a robust version of conditional expectation is introduced for which the prediction mean squared error is replaced with an M scale. This concept is then used to develop a nonparametric criterion to estimate the transformation parameter as well as the regression coefficients. A finite sample estimate of this criterion based on a robust version of smearing is also proposed. Monte Carlo experiments show that the new estimates compare favorably with respect to the available competitors.

Sustainability of the Peruvian anchoveta supply chains from sea to shelf: towards a new strategy for optimal use of resources

The research performed a sustainability assessment of supply chains of the anchoveta (Engraulis ringens) in Peru. The corresponding fisheries lands 6.5 million t per year, of which <2% is rendered into products for direct human consumption (DHC) and 98% reduced into feed ingredients (fishmeal and fish oil, FMFO), for export. Several industries compete for the anchoveta resources, generating local and global impacts. The need for understanding these dynamics, towards sustainability-improving management and policy recommendations, determined the development of a sustainability assessment framework: 1) characterisation and modelling of the systems under study (with Life Cycle Assessment and other tools) including local aquaculture, 2) calculation of sustainability indicators (i.e. energy efficiency, nutritional value, socio-economic performances), and 3) sustainability comparison of supply chains; definition and comparison of alternative exploitation scenarios. Future exploitation scenarios were defined by combining an ecosystem and a material flow models: continuation of the status quo (Scenario 1), shift towards increased proportion of DHC production (Scenario 2), and radical reduction of the anchoveta harvest in order for other fish stocks to recover and be exploited for DHC (Scenario 3). Scenario 2 was identified as the most sustainable. Management and policy recommendations include improving of: controls for compliance with management measures, sanitary conditions for DHC, landing infrastructure for small- and medium-scale (SMS) fisheries; the development of a national refrigerated distribution chain; and the assignation of flexible tolerances for discards from different DHC processes.

Optimal management of microgrids

Desenvolupament dels models matemàtics necessaris per a controlar de forma òptima la microxarxa existent als laboratoris del Institut de Recerca en Energia de Catalunya. Els algoritmes s'implementaran per tal de simular el comportament i posteriorment es programaran directament sobre els elements de la microxarxa per verificar el seu correcte funcionament.. Desenvolupament dels models matemàtics necessaris per a controlar de forma òptima la microxarxa existent als laboratoris del Institut de Recerca en Energia de Catalunya. Els algoritmes s'implementaran per tal de simular el comportament i posteriorment es programaran directament sobre els elements de la microxarxa per verificar el seu correcte funcionament.

Optimal Mechanical PulpingProcesses for Eucalyptus, Acacia and Birch

Tässä diplomityössä tutkittiin ja vertailtiin eukalyptuksen, akaasian ja koivun kemimekaanista kuiduttamista ja valkaisua. Yleensä näitä puulajeja käytetään sellun keittoon. Puulajit eroavat toisistaan kasvupaikan ja kuiturakenteen osalta. Eukalyptus ja akaasia ovat niin sanottuja trooppisia lehtipuita, kun taas koivu kasvaa pohjoisilla vyöhykkeillä. Koivulla on kookkaimmat kuidut ja akaasialla pienimmät kuidut. Myös näiden lajien putkilot eroavat toisistaan. Koivun putkilot ovat pitkiä ja kapeita, kun taas eukalyptuksen ja akaasian putkilot ovat lyhyitä ja leveitä. Prosessiksi valittiin kaksivaiheinen APMP-prosessi. Koeajot tehtiinKeskuslaboratorio Oy:ssä. Massoille asetettiin seuraavat tavoitteet: freeness 150-200 ml ja vaaleus 80 %ISO. Eukalyptukselle ja koivulle tehtiin kaksi erilaista impregnointisarjaa, mutta akaasialle vain yksi. Jauhatuksen viimeisessä vaiheessa kokeiltiin myös jauhinvalkaisua. Jauhatuksen energiankulutus oli korkea varsinkin eukalyptuksella ja akaasialla. Jotta energiankulutus saataisiin pienemmäksi, tulisi käyttää enemmän lipeää, mutta se johtaa alkalitummumiseen. Lopuksi massat valkaistiin laboratoriossa. Eukalyptus ja koivu pystyttiin valkaisemaan vaaleuteen 80 %ISO, mutta eukalyptuksen valkaisu vaati enemmän peroksidia kuin koivun valkaisu. Akaasian lähtövaaleus oli niin alhainen, ettei siinä päästy tavoitevaaleuteen. Eukalyptuksella on parempi valonsironta ja paremmat lujuusominaisuudet kuin koivulla. Kemimekaanista massaa voidaan käyttää hienopaperissa parantamassa jäykkyyttä, bulkkia ja valonsirontaa, mutta usein ongelmana on alhainen vaaleus ja huono vaaleuden pysyvyys. Kemimekaanista massaa voidaankäyttää missä tahansa mekaanisissa painopapereissa. Mekaanisissa painopapereissa kemimekaanisella lehtipuumassalla voidaan korvata mekaanista havupuumassaa. Akaasia on niin tummaa, ettei sitä voida käyttää korkeavaaleuksisiin papereihin. Eukalyptus ja koivu ovat vaaleampia ja helpompia valkaista kuin akaasia, mutta myös niillä on niin huono vaaleudenpysyvyys että käyttö hienopapereissa on rajoittunutta. Mekaanisille eukalyptus ja koivumassoille hienopaperia parempi käyttökohde on mekaaniset painopaperit, kuten MWC-paperi.

Choice of Optimal MembraneProcesses for Economical Treatment of Paper Machine Clear Filtrate

In this thesis membrane filtration of paper machnie clear filtrate was studied. The aim of the study was to find membrane processes which are able to produce economically water of sufficient purity from paper machine white water or its saveall clarified fractions for reuse in the paper machnie short circulation. Factors affecting membrane fouling in this application were also studied. The thesis gives an overview af experiments done on a laboratory and a pilot scale with several different membranes and membrane modules. The results were judged by the obtained flux, the fouling tendency and the permeate quality assessed with various chemical analyses. It was shown that membrane modules which used a turbulence promotor of some kind gave the highest fluexes. However, the results showed that the greater the reduction in the concentration polarisation layer caused by increased turbulence in the module, the smaller the reductions in measured substances. Out of the micro-, ultra- and nanofiltration membranes tested, only nanofiltration memebranes produced permeate whose quality was very close to that of the chemically treated raw water used as fresh water in most paper mills today and which should thus be well suited for reuse as shower water both in the wire and press section. It was also shown that a one stage nanofiltration process was more effective than processes in which micro- or ultrafiltration was used as pretreatment for nanofiltration. It was generally observed that acidic pH, high organic matter content, the presence of multivalent ions, hydrophobic membrane material and high membrane cutoff increased the fouling tendency of the membranes.

Analyse de réseau piéton et gestion scolaire: sinuosité, centricité et transport optimal régularisé

Que ce soit d'un point de vue, urbanistique, social, ou encore de la gouvernance, l'évolution des villes est un défi majeur de nos sociétés contemporaines. En offrant la possibilité d'analyser des configurations spatiales et sociales existantes ou en tentant de simuler celles à venir, les systèmes d'information géographique sont devenus incontournables dans la gestion et dans la planification urbaine. En cinq ans la population de la ville de Lausanne est passée de 134'700 à 140'570 habitants, alors que les effectifs de l'école publique ont crû de 12'200 à 13'500 élèves. Cet accroissement démographique associé à un vaste processus d'harmonisation de la scolarité obligatoire en Suisse ont amené le Service des écoles à mettre en place et à développer en collaboration avec l'université de Lausanne des solutions SIG à même de répondre à différentes problématiques spatiales. Établies en 1989, les limites des établissements scolaires (bassins de recrutement) ont dû être redéfinies afin de les réadapter aux réalités d'un paysage urbain et politique en pleine mutation. Dans un contexte de mobilité et de durabilité, un système d'attribution de subventions pour les transports publics basé sur la distance domicile-école et sur l'âge des écoliers, a été conçu. La réalisation de ces projets a nécessité la construction de bases de données géographiques ainsi que l'élaboration de nouvelles méthodes d'analyses exposées dans ce travail. Cette thèse s'est ainsi faite selon une dialectique permanente entre recherches théoriques et nécessités pratiques. La première partie de ce travail porte sur l'analyse du réseau piéton de la ville. La morphologie du réseau est investiguée au travers d'approches multi-échelles du concept de centralité. La première conception, nommée sinuo-centralité ("straightness centrality"), stipule qu'être central c'est être relié aux autres en ligne droite. La deuxième, sans doute plus intuitive, est intitulée centricité ("closeness centrality") et exprime le fait qu'être central c'est être proche des autres (fig. 1, II). Les méthodes développées ont pour but d'évaluer la connectivité et la marchabilité du réseau, tout en suggérant de possibles améliorations (création de raccourcis piétons). Le troisième et dernier volet théorique expose et développe un algorithme de transport optimal régularisé. En minimisant la distance domicile-école et en respectant la taille des écoles, l'algorithme permet de réaliser des scénarios d'enclassement. L'implémentation des multiplicateurs de Lagrange offre une visualisation du "coût spatial" des infrastructures scolaires et des lieux de résidence des écoliers. La deuxième partie de cette thèse retrace les aspects principaux de trois projets réalisés dans le cadre de la gestion scolaire. À savoir : la conception d'un système d'attribution de subventions pour les transports publics, la redéfinition de la carte scolaire, ou encore la simulation des flux d'élèves se rendant à l'école à pied. *** May it be from an urbanistic, a social or from a governance point of view, the evolution of cities is a major challenge in our contemporary societies. By giving the opportunity to analyse spatial and social configurations or attempting to simulate future ones, geographic information systems cannot be overlooked in urban planning and management. In five years, the population of the city of Lausanne has grown from 134'700 to 140'570 inhabitants while the numbers in public schools have increased from 12'200 to 13'500 students. Associated to a considerable harmonisation process of compulsory schooling in Switzerland, this demographic rise has driven schooling services, in collaboration with the University of Lausanne, to set up and develop GIS capable of tackling various spatial issues. Established in 1989, the school districts had to be altered so that they might fit the reality of a continuously changing urban and political landscape. In a context of mobility and durability, an attribution system for public transport subventions based on the distance between residence and school and on the age of the students was designed. The implementation of these projects required the built of geographical databases as well as the elaboration of new analysis methods exposed in this thesis. The first part of this work focuses on the analysis of the city's pedestrian network. Its morphology is investigated through multi-scale approaches of the concept of centrality. The first conception, named the straightness centrality, stipulates that being central is being connected to the others in a straight line. The second, undoubtedly more intuitive, is called closeness centrality and expresses the fact that being central is being close to the others. The goal of the methods developed is to evaluate the connectivity and walkability of the network along with suggesting possible improvements (creation of pedestrian shortcuts).The third and final theoretical section exposes and develops an algorithm of regularised optimal transport. By minimising home to school distances and by respecting school capacity, the algorithm enables the production of student allocation scheme. The implementation of the Lagrange multipliers offers a visualisation of the spatial cost associated to the schooling infrastructures and to the student home locations. The second part of this thesis recounts the principal aspects of three projects fulfilled in the context of school management. It focuses namely on the built of an attribution system for public transport subventions, a school redistricting process and on simulating student pedestrian flows.