Thermoplastic polyesters and Co-polyesters derived from vegetable oil: synthesis and optimization of melt polycondensation for medium and long chain poly(omega-hydroxyfatty acid)s and their ester derivatives

The synthesis of a series of omega-hydroxyfatty acid (omega-OHFA) monomers and their methyl ester derivatives (Me-omega-OHFA) from mono-unsaturated fatty acids and alcohols via ozonolysis-reduction/crossmetathesis reactions is described. Melt polycondensation of the monomers yielded thermoplastic poly(omega-hydroxyfatty acid)s [-(CH2)(n)-COO-](x) with medium (n = 8 and 12) and long (n = 17) repeating monomer units. The omega-OHFAs and Me-omega-OHFAs were all obtained in good yield (>= 80%) and purity (>= 97%) as established by H-1 NMR, Fourier Transform infra-red spectroscopy (FT-IR), mass spectroscopy (ESI-MS) and high performance liquid chromatography (HPLC) analyses. The average molecular size (M-n) and distribution (PDI) of the poly(omega-hydroxyfatty acid)s (P(omega-OHFA)s) and poly(omega-hydroxyfatty ester) s (P(Me-omega-OHFA) s) as determined by GPC varied with organo-metallic Ti(IV) isopropoxide [Ti(OiPr)(4)] polycondensation catalyst amount, reaction time and temperature. An optimization of the polymerization process provided P(omega-OHFA) s and P(Me-omega-OHFA) s with M-n and PDI values desirable for high end applications. Co-polymerization of the long chain (n = 12) and medium chain (n = 8) Me-omega-OHFAs by melt polycondensation yielded poly(omega-hydroxy tridecanoate/omega-hydroxy nonanoate) random co-polyesters (M-n = 11000- 18500 g mol(-1)) with varying molar compositions.

Obtenção e estudo de polímeros supramoleculares derivados de ácidos carboxílicos-meglumina em fase aquosa

Pós-graduação em Química - IQ

Untersuchung der Bindung des humanen Papillomvirus HPV16 an Heparansulfate der Zelloberfläche

In 99,7% aller Zervixkarzinome kann die DNA humaner Papillomviren (HPV) nachgewiesen werden, die somit den Hauptauslöser für eine der häufigsten Krebserkrankungen bei Frauen weltweit darstellen. HPV16 ist verantwortlich für etwa 50% aller Zervixkarzinome. Für die Infektion von Zellen mit HPV16 ist die Interaktion mit Heparansulfatproteoglykanen der Zelloberfläche essentiell. Um Aminosäuren auf der Oberfläche des majoren Kapsidproteins L1 von HPV16 zu identifizieren, die zu dieser Interaktion beitragen, wurden im Rahmen dieser Arbeit zahlreiche Punktmutanten hergestellt und analysiert. Der Austausch der drei Lysine K278, K356 und K361 zu Alaninen führte zu signifikant verminderter Zell-, Heparin- und Heparansulfatbindung, die noch weiter reduziert wurde, wenn zwei oder drei der Lysine gleichzeitig mutiert waren. Auch die Infektiosität der mutanten Pseudovirionen war stark beeinträchtigt, die Trippelmutante zeigte nur noch 5% Infektiosität. Diese Ergebnisse demonstrieren, dass die drei Lysine gemeinsam die Bindestelle für Heparansulfate bilden. Ihr Austausch zu Argininen beeinflusste die Infektiosität der Partikel hingegen nicht, was bestätigt, dass die Interaktion mit Heparansulfaten von der positiven Ladungsdichte abhängt und nicht sequenzspezifisch ist. Die drei Lysine befinden sich auf der Spitze des HPV16-Kapsomers in einer flachen Tasche, die aufgrund ihrer Struktur bereits früher als potentielle Rezeptorbindestelle vorgeschlagen wurde. Fab-Fragmente des bindungsneutralisierenden Antikörpers H16.56E, dessen Epitop in direkter Nachbarschaft der Lysine liegt, inhibierten die heparansulfatvermittelte Zellbindung viraler Partikel. Auch Epitope anderer bindungsneutralisierender Antikörper befinden sich in der Nähe. Dies untermauert die Hypothese, dass die Lysine K278, K356 und K361 die Heparansulfatbindestelle von HPV16 bilden. Der Austausch von Threoninen, die genau zwischen den Lysinen liegen, hatte keine Auswirkung auf Bindung der Partikel und Infektiosität. Sie könnten jedoch durch die Bildung von Wasserstoffbrücken die Bindung an Heparansulfat stabilisieren. Die Bedeutung der Lysine K278, K356 und K361 bei der primären Interaktion von HPV16 mit Heparansulfaten konnte durch die Computersimulation der Interaktion der Virusoberfläche mit einem Heparinmolekül bestätigt werden. Des Weiteren konnten Anforderungen ermittelt werden, die eine solche Interaktion an das Heparinmolekül stellt. Weiterhin zeigten die Ergebnisse dieser Arbeit, dass basische Aminosäuren in der interkapsomeren Grube nicht an der primären Zellbindung an Heparansulfate beteiligt zu sein scheinen, aber eine Rolle bei sekundären Interaktionen mit der Zelloberfläche spielen könnten.

Structure property relations in complex copolymer systems

A thorough investigation was made of the structure-property relation of well-defined statistical, gradient and block copolymers of various compositions. Among the copolymers studied were those which were synthesized using isobornyl acrylate (IBA) and n-butyl acrylate (nBA) monomer units. The copolymers exhibited several unique properties that make them suitable materials for a range of applications. The thermomechanical properties of these new materials were compared to acrylate homopolymers. By the proper choice of the IBA/nBA monomer ratio, it was possible to tune the glass transition temperature of the statistical P(IBA-co-nBA) copolymers. The measured Tg’s of the copolymers with different IBA/nBA monomer ratios followed a trend that fitted well with the Fox equation prediction. While statistical copolymers showed a single glass transition (Tg between -50 and 90 ºC depending on composition), DSC block copolymers showed two Tg’s and the gradient copolymer showed a single, but very broad, glass transition. PMBL-PBA-PMBL triblock copolymers of different composition ratios were also studied and revealed a microphase separated morphology of mostly cylindrical PMBL domains hexagonally arranged in the PBA matrix. DMA studies confirmed the phase separated morphology of the copolymers. Tensile studies showed the linear PMBL-PBA-PMBL triblock copolymers having a relatively low elongation at break that was increased by replacing the PMBL hard blocks with the less brittle random PMBL-r-PMMA blocks. The 10- and 20-arm PBA-PMBL copolymers which were studied revealed even more unique properties. SAXS results showed a mixture of cylindrical PMBL domains hexagonally arranged in the PBA matrix, as well as lamellar. Despite PMBL’s brittleness, the triblock and multi-arm PBA-PMBL copolymers could become suitable materials for high temperature applications due to PMBL’s high glass transition temperature and high thermal stability. The structure-property relation of multi-arm star PBA-PMMA block copolymers was also investigated. Small-angle X-ray scattering revealed a phase separated morphology of cylindrical PMMA domains hexagonally arranged in the PBA matrix. DMA studies found that these materials possess typical elastomeric behavior in a broad range of service temperatures up to at least 250°C. The ultimate tensile strength and the elastic modulus of the 10- and 20-arm star PBA-PMMA block copolymers are significantly higher than those of their 3-arm or linear ABA type counterparts with similar composition, indicating a strong effect of the number of arms on the tensile properties. Siloxane-based copolymers were also studied and one of the main objectives here was to examine the possibility to synthesize trifluoropropyl-containing siloxane copolymers of gradient distribution of trifluoropropyl groups along the chain. DMA results of the PDMS-PMTFPS siloxane copolymers synthesized via simultaneous copolymerization showed that due to the large difference in reactivity rates of 2,4,6-tris(3,3,3-trifluoropropyl)-2,4,6-trimethylcyclotrisiloxane (F) and hexamethylcyclotrisiloxane (D), a copolymer of almost block structure containing only a narrow intermediate fragment with gradient distribution of the component units was obtained. A more dispersed distribution of the trifluoropropyl groups was obtained by the semi-batch copolymerization process, as the DMA results revealed more ‘‘pure gradient type’’ features for the siloxane copolymers which were synthesized by adding F at a controlled rate to the polymerization of the less reactive D. As with trifluoropropyl-containing siloxane copolymers, vinyl-containing polysiloxanes may be converted to a variety of useful polysiloxane materials by chemical modification. But much like the trifluoropropyl-containing siloxane copolymers, as a result of so much difference in the reactivities between the component units 2,4,6-trivinyl-2,4,6-trimethylcyclotrisiloxane (V) and hexamethylcyclotrisiloxane (D), thermal and mechanical properties of the PDMS-PMVS copolymers obtained by simultaneous copolymerization was similar to those of block copolymers. Only the copolymers obtained by semi-batch method showed properties typical for gradient copolymers.

Lichtsammler hinter Glas : Stabilisierung und Funktionalisierung des pflanzlichen Hauptlichtsammelkomplexes (LHCII) durch biomineralische Einbettung in Nanopartikel

Der Haupt-Lichtsammelkomplex des Fotosystems II (LHCII) setzt sich aus einem Proteinanteil und nicht-kovalent gebundenen Pigmenten – 8 Chlorophyll a, 6 Chlorophyll b und 4 Carotinoide - zusammen. Er assembliert in vivo zu einem Trimer, in dem die Monomereinheiten ebenfalls nicht-kovalent miteinander wechselwirken. Die ausgesprochen hohe Farbstoffdichte und die Tatsache, dass der Komplex rekombinant hergestellt werden kann, machen den LHCII zu einem interessanten Kandidaten für technische Anwendungen wie einer Farbstoffsolarzelle. Allerdings muss hierzu seine thermische Stabilität drastisch erhöht werden.rnDer Einschluss von Proteinen/Enzymen in Silikat erhöht deren Stabilität gegenüber Hitze signifikant. LHCII sollte als erster rekombinanter Membranproteinkomplex mittels kovalent verbundener, polykationischen Sequenzen in Silikat eingeschlossen werden. Hierzu wurde der Komplex auf zwei Weisen polykationisch modifiziert: Auf Genebene wurde die Sequenz des R5-Peptids in den N-terminalen Bereich des LHCP-Gens eingeführt und ein Protokoll zur Überexpression, Rekonstitution und Trimerisierung etabliert. Außerdem wurde eine kovalente Modifikation des trimeren LHCII mit dem Arginin-reichen Protamin über heterobifunktionelle Crosslinker entwickelt. Beide resultierenden LHCII-Derivate waren in der Lage, Silikat autogen zu fällen. Die Stabilisierung der so in Silikat präzipitierten Komplexe war jedoch deutlich geringer als bei nicht-modifizierten Komplexen, die durch eine Spermin-induzierte Copräzipitation eingeschlossenen wurden. Dabei zeigte sich, dass für den Anteil der eingebauten Komplexe und das Ausmaß an Stabilisierung die Größe und klare partikuläre Struktur des Silikats entscheidend ist. Kleine Partikel mit einem Durchmesser von etwa 20 nm führten zu einem Einbau von rund 75 % der Komplexe, und mehr als 80 % des Energietransfers innerhalb des Komplexes blieben erhalten, wenn für 24 Stunden bei 50°C inkubiert wurde. Nicht in Silikat eingeschlossene Komplexe verloren bei 50°C ihren Komplex-internen Energietransfer binnen weniger Minuten. Es war dabei unerheblich, ob die Partikelgröße durch die Wahl des Puffers und des entsprechenden pH-Wertes, oder aber durch Variation des Spermin-zu-Kieselsäure-Verhältnisses erreicht wurde. Wurden die polykationisch veränderten Komplexe in solchen Copräzipitationen verwendet, so erhöhte sich der Anteil an eingebauten Komplexen auf über 90 %, jedoch wurde nur bei der R5-modifizierten Variante vergleichbare Ausmaße an Stabilisierung erreicht. Ein noch höherer Anteil an Komplexen wurde in das Silikatpellet eingebaut, wenn LHCII kovalent mit Silanolgruppen modifiziert wurde (95 %); jedoch war das Ausmaß der Stabilisierung wiederum geringer als bei einer Copräzipitation. Die analysierten Fällungssysteme waren außerdem in der Lage, Titandioxid zu fällen, wobei der Komplex in dieses eingebaut wurde. Allerdings muss das Stabilisierungspotential hier noch untersucht werden. Innerhalb eines Silikatpräzipitats aggregierten die Komplexe nicht, zeigten aber einen inter-trimeren Energietransfer, der sehr wahrscheinlich auf einem Förster Resonanz Mechanismus basiert. rnDies und das hohe Maß an Stabilisierung eröffnen neue Möglichkeiten, rekombinanten LHCII in technischen Applikationen als Lichtsammelkomponente zu verwenden.rn

Kinetic study of the thermal degradation of high density polyethylene

The thermal degradation of high density polyethylene has been modelled by the random breakage of polymer bonds, using a set of population balance equations. A model was proposed in which the population balances were lumped into representative sizes so that the experimentally determined molecular weight distribution of the original polymer could be used as the initial condition. This model was then compared to two different cases of the unlumped population balance which assumed unimolecular initial distributions of 100 and 500 monomer units, respectively. The model that utilised the experimentally determined molecular weight distribution was found to best describe the experimental data. The model fits suggested a second mechanism in addition to random breakage at slow reaction rates. (c) 2005 Elsevier Ltd. All rights reserved.

Sequence distributions in free-radical polymers

This thesis is concerned with demonstrating how the visual representation of the sequence distribution of individual monomer units, of a polymer, that would be observed upon polymerisation, may be utilised in designing and synthesizing polymers with relatively low cell adhesion characteristics, The initial part of this thesis is concerned with demonstrating the use of a computer simulation technique, in illustrating the sequence distribution that would be observed upon the polymerisation of a set of monomers. The power of the computer simulation technique has been demonstrated through the simulation of the sequence distributions of some generic contact lens materials. These generic contact lens materials were chosen simply because in the field of biomaterials their compositions are amongst the most systematically regulated and they present a wide range of compositions. The validity of the computer simulation technique has been assessed through the synthesis and analysis of linear free-radical polymers at different conversions. Two main parameters were examined, that of composition and the number-average sequence lengths of individual monomer units, at various conversions. The polymers were synthesized through the solution polymerisation process. The monomer composition was determined by elemental analysis and 13C nuclear magnetic analysis (NMR). Number-average sequence lengths were determined exclusively through 13C NMR. Although the computer simulation technique provides a visual representation of the monomer sequence distribution up to 100% conversion, these assessments were made on linear polymers at a reasonably high conversion (above 50%) but below 100% conversion of ease for analysis. The analyses proved that the computer simulation technique was reasonably accurate in predicting the sequence distribution of monomer units, upon polymerisation, in the polymer.An approach has been presented which allows one to manipulate the use of monomers, with their reactivity ratios, thereby enabling us to design polymers with controlled sequence distributions.Hydrogel membranes, with relatively controlled sequence distributions and polymerised to 100% conversion, were synthesized to represent prospective biomaterials. Cell adhesion studies were used as a biological probe to investigate the susceptibility of the surface of these membranes to cell adhesion. This was necessary in order to assess the surface biocompatibility or biotolerance of these prospective biomaterials.

Control over the Self-Assembly Modes of PtII Complexes by Alkyl Chain Variation: From Slipped to Parallel π-Stacks

We report the self-assembly of a new family of hydrophobic,bis(pyridyl) PtII complexes featuring an extendedoligophenyleneethynylene-derived π-surface appended withsix long (dodecyloxy (2)) or short (methoxy (3)) side groups.Complex 2, containing dodecyloxy chains, forms fibrous assemblies with a slipped arrangement of the monomer units (dPt···Pt… =14 Å) in both nonpolar solvents and the solid state.Dispersion-corrected PM6 calculations suggest that this organizationis driven by cooperative π–π, C-H···Cl and π–Pt interactions, which is supported by EXAFS and 2D NMR spectroscopic analysis. In contrast, nearly parallel π-stacks (dPt···Pt… = 4.4 Å) stabilized by multiple π–π and C-H···Cl contact sare obtained in the crystalline state for 3 lacking longside chains, as shown by X-ray analysis and PM6 calculations.Our results reveal not only the key role of alkyl chain lengthin controlling self-assembly modes but also show the relevanceof Pt-bound chlorine ligands as new supramolecular synthons.

Effect of Pre-Heating Resin Composite and Light-Curing Units on Monomer Conversion

The purpose of this study was to evaluate the effect of pre-heating resin composite photo-cured with light-curing units (LCU) by FT-IR. Twenty specimens were made in a metallic mold (4 mm diameter x 2 mm thick) from composite resin-Tetric Ceram (R) (Ivoclar/Vivadent) at room temperature (25 degrees C) and pre heated to 37, 54, and 60 degrees C. The specimens were cured with halogen curing light (QTH) and light emitted by diodes (LED) during 40 s. Then, the specimens were pulverized, pressed with KBr and analyzed with FT-IR. The data were submitted to statistical analysis of variance and Kruskal-Wallis test. Study data showed no statistically significant difference to the degree of conversion for the different light curing units (QTH and LED) (p > 0.05). With the increase of temperature there was significant increase in the degree of conversion (p < 0.05). In this study were not found evidence that the light curing unit and temperature influenced the degree of conversion.

Effect of pre-heating resin composite and light-curing units on monomer conversion

The purpose of this study was to evaluate the effect of pre-heating resin composite photo-cured with light-curing units (LCU) by FT-IR. Twenty specimens were made in a metallic mold (4 mm diameter × 2 mm thick) from composite resin-Tetric Ceram® (Ivoclar/Vivadent) at room temperature (25°C) and pre-heated to 37, 54, and 60°C. The specimens were cured with halogen curing light (QTH) and light emitted by diodes (LED) during 40 s. Then, the specimens were pulverized, pressed with KBr and analyzed with FT-IR. The data were submitted to statistical analysis of variance and Kruskal-Wallis test. Study data showed no statistically significant difference to the degree of conversion for the different light curing units (QTH and LED) (p > 0.05). With the increase of temperature there was significant increase in the degree of conversion (p < 0.05). In this study were not found evidence that the light curing unit and temperature influenced the degree of conversion. © 2010 Pleiades Publishing, Ltd.

A New Class Of Photo-Cross-Linkable Side-Chain Liquid Crystalline Polymers Containing Bis(Benzylidene)Cyclohexanone Units

This paper reports a new class of photo-cross-linkable side chain liquid crystalline polymers (PSCLCPs) based on the bis(benzylidene)cyclohexanone unit, which functions as both a mesogen and a photoactive center. Polymers with the bis(benzylidene)cyclohexanone unit and varying spacer length have been synthesized. Copolymers of bis(benzylidene)cyclohexanone containing monomer and cholesterol benzoate containing monomer with different compositions have also been prepared. All these polymers have been structurally characterized by spectroscopic techniques. Thermal transitions were studied by DSC, and mesophases were identified by polarized light optical microscopy (POM). The intermediate compounds OH-x, the monomers SCLCM-x, and the corresponding polymers PSCLCP-x, which are essentially based on bis(benzylidene)cyclohexanone, all show a nematic mesophase. Transition temperatures were observed to decrease with increasing spacer length. The copolymers with varying compositions exhibit a cholesteric mesophase, and the transition temperatures increase with the cholesteric benzoate units in the copolymer. Photolysis of the low molecular weight liquid crystalline bis(benzylidene)-cyclohexanone compound reveals that there are two kinds of photoreactions in these systems: the EZ photoisomerization and 2 pi + 2 pi addition. The EZ photoisomerization in the LC phase disrupts the parallel stacking of the mesogens, resulting in the transition from the LC phase to the isotropic phase. The photoreaction involving the 2 pi + 2 pi addition of the bis(benzylidene)cyclohexanone units in the polymer results in the cross-linking of the chains. The liquid crystalline induced circular dichroism (LCICD) studies of the cholesterol benzoate copolymers revealed that the cholesteric supramolecular order remains even after the photo-cross-linking.

Surfactant lipids containing aromatic units produce vesicular membranes with high thermal stability

Six new vesicle-forming, cationic surfactant lipids are synthesized. Four of them contain 'flat' aromatic units at different locations of hydrophobic segments. In order to estimate the influence of aromatic units in the lipid monomer two other surfactant lipids of related structure with n-butyloxy units in the places of aromatic groups were also prepared. Transmission electron microscopy confirmed the vesicular membrane formation from these newly synthesized lipids. DSC or temperature-dependent keto-enol tautomerism of benzoylacetanilide-doped vesicles reveal a remarkable increase in the thermal stability of the membranes formed from aromatic surfactant lipids in contradistinction to their counterparts that contain n-butyloxy units. The enhanced thermal stability originates presumably as a consequence of inter-monomer stacking.

Effect of crystal-disrupting chlorohydroquinone on the first-order transitions of poly(aryl ether ketone)s containing biphenyl units

The novel poly(aryl ether ketone)s were synthesized by nucleophilic substitution reactions of 4,4'-difluorobenzophenone with 4,4'-biphenyldiol and chlorohydroquinone. As expected, the copolymers have lower melting transitions than the biphenyldiol-based homopoly(aryl ether ketone) because of the copolymerization effect of the crystal-disrupting monomer chlorohydroquinone. Copolymers containing 50 and 70% biphenyldiol show two first-order transitions which are associated with the crystal-to-liquid crystal transition and the liquid crystal-to-isotropic transition.

Synthesis of novel hyperbranched polymers featuring oxazoline linear units and their application in fast-drying solvent-borne coating formulations

Novel acid-terminated hyperbranched polymers (HBPs) containing adipic acid and oxazoline monomers derived from oleic and linoleic acid have been synthesized via a bulk polymerization procedure. Branching was achieved as a consequence of an acid-catalyzed opening of the oxazoline ring to produce a trifunctional monomer in situ which delivered branching levels of >45% as determined by 1H and 13C NMR spectroscopy. The HBPs were soluble in common solvents, such as CHCl3, acetone, tetrahydrofuran, dimethylformamide, and dimethyl sulfoxide and were further functionalized by addition of citronellol to afford white-spirit soluble materials that could be used in coating formulations. During end group modification, a reduction in branching levels of the HBPs (down to 12–24%) was observed, predominantly on account of oxazoline ring reformation and trans-esterification processes under the reaction conditions used. In comparison to commercial alkyd resin paint coatings, formulations of the citronellol-functionalized hyperbranched materials blended with a commercial alkyd resin exhibited dramatic decreases of the blend viscosity when the HBP content was increased. The curing characteristics of the HBP/alkyd blend formulations were studied by dynamic mechanical analysis which revealed that the new coatings cured more quickly and produced tougher materials than otherwise identical coatings prepared from only the commercial alkyd resins.

Influence of pre-heat treatment and different light-curing units on Vickers hardness of a microhybrid composite resin

The aim of this study was to evaluate the hardness of a dental composite resin submitted to temperature changes before photo-activation with two light-curing unite (LCUs). Five samples (4 mm in diameter and 2 mm in thickness) for each group were made with pre-cure temperatures of 37, 54, and 60A degrees C. The samples were photo-activated with a conventional quartz-tungsten-halogen (QTH) and blue LED LCUs during 40 s. The hardness Vickers test (VHN) was performed on the top and bottom surfaces of the samples. According to the interaction between light-curing unit and different pre-heating temperatures of composite resin, only the light-curing unit provided influences on the mean values of initial Vickers hardness. The light-curing unit based on blue LED showed hardness mean values more homogeneous between the top and bottom surfaces. The hardness mean values were not statistically significant difference for the pre-cure temperature used. According to these results, the pre-heating of the composite resin provide no influence on Vickers hardness mean values, however the blue LED showed a cure more homogeneous than QTH LCU.