988 resultados para Loss prevention


Relevância:

60.00% 60.00%

Publicador:

Resumo:

Background: the purpose of this study was to evaluate the effect of a selective cyclooxygenase-2 inhibitor on the progression of alveolar bone loss in an experimental periodontitis model in rats.Methods: One hundred eighty (180) Wistar rats were separated into 3 experimental groups. Cotton ligatures were placed at the gingival margin level of lower right first molars. The rats were randomly assigned to one of the following groups that received: a daily oral dose of 10 mg/kg body weight of celecoxib (Ce1); 20 mg/kg body weight of celecoxib (Ce2); or 10 ml/kg of saline solution (C). Serum levels of celecoxib and white blood cell count were determined. Standardized digital radiographs were taken after sacrifice at 3, 5, 10, 18, and 30 days to measure the amount of bone loss around the mesial root surface of the first molar tooth in each rat.Results: Two-way analysis of variance (ANOVA) indicated that groups treated with celecoxib had significantly less bone loss compared to controls (P <0.0001) and that there was a significant interaction between treatment with celecoxib and time (P <0.03). Post-hoc comparisons showed that in both groups treated with celecoxib, the bone loss became significant only after 10 days of ligature placement, while in the control group it was already significant after 5 days. However, differences in mean bone loss between control and Ce1 were significant only at 18 days and, between control and Ce2, at 5 and 18 days. There was no significant difference in bone loss among experimental groups at the end of the experimental period.Conclusion: These data provide evidence that systemic therapy with celecoxib can modify the progression of experimentally induced periodontitis in rats.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

OBJECTIVE: To evaluate the association between tourniquet and total operative time during total knee arthroplasty and the occurrence of deep vein thrombosis. METHODS: Seventy-eight consecutive patients from our institution underwent cemented total knee arthroplasty for degenerative knee disorders. The pneumatic tourniquet time and total operative time were recorded in minutes. Four categories were established for total tourniquet time: <60, 61 to 90, 91 to 120, and >120 minutes. Three categories were defined for operative time: <120, 121 to 150, and >150 minutes. Between 7 and 12 days after surgery, the patients underwent ascending venography to evaluate the presence of distal or proximal deep vein thrombosis. We evaluated the association between the tourniquet time and total operative time and the occurrence of deep vein thrombosis after total knee arthroplasty. RESULTS: In total, 33 cases (42.3%) were positive for deep vein thrombosis; 13 (16.7%) cases involved the proximal type. We found no statistically significant difference in tourniquet time or operative time between patients with or without deep vein thrombosis. We did observe a higher frequency of proximal deep vein thrombosis in patients who underwent surgery lasting longer than 120 minutes. The mean total operative time was also higher in patients with proximal deep vein thrombosis. The tourniquet time did not significantly differ in these patients. CONCLUSION: We concluded that surgery lasting longer than 120 minutes increases the risk of proximal deep vein thrombosis.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Confronto tra due software specifici per l'analisi di rischio nel trasporto stradale di merci pericolose (TRAT GIS 4.1 e QRAM 3.6) mediante applicazione a un caso di studio semplice e al caso reale di Casalecchio di Reno, comune della provincia di Bologna.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

La ricerca ha ad oggetto l’analisi della disciplina della responsabilità del vettore terrestre di merci per conto terzi ed i riflessi che detta disciplina ha avuto modo di svilupparsi nel mercato assicurativo. L’attenzione è stata rivolta al contratto di trasporto di cose in generale, seguendone la disciplina codicistica e le evoluzioni legislative intervenute. Particolare rilievo assume la novella apportata all’art. 1696 c.c., introdotta dall’art. 10 del Dlgs. 286/2005, grazie alla quale l’ordinamento italiano ha potuto codificare il limite di indennizzo dovuto dal vettore nell’ipotesi di colpa lieve, L’introduzione del limite legale di indennizzo per le ipotesi di responsabilità per perdita o avaria della merce trasportata ha generato nel mondo assicurativo interessanti reazioni. L’elaborato esamina anche l’evoluzione giurisprudenziale formatisi in tema di responsabilità vettoriale, evidenziando il crescente rigore imposto dalla giurisprudenza fondato sul principio del receptum. Tale fenomeno ha visto immediata reazione nel mercato assicurativo il quale, sulla base di testi contrattuali non dissimili tra le diverse compagnie di assicurazioni operanti sul mercato domestico e che traevano origine dai formulari approvati dall’ANIA, ha seguito l’evoluzione giurisprudenziale apportando significative restrizioni al rischio tipico previsto dalle coperture della responsabilità civile vettoriale. La ricerca si è poi focalizzata sull’esame delle più comuni clausole contemplate dalle polizze di assicurazioni di responsabilità civile e sul loro significato alla luce delle disposizioni di legge in materia. Tale analisi riveste preminente interesse poiché consente di verificare in concreto come l’assicurazione possa effettivamente costituire per l’impresa di trasporto non tanto un costo bensì una opportunità di risparmio da un lato ed un modello comportamentale, sebbene indotto, dall’altro lato per il raggiungimento di quei canoni di diligenza che qualsiasi operatore del settore dovrebbe tenere durante l’esecuzione del trasporto ed il cui venir meno determina, come detto, sensibili effetti pregiudizievoli di carattere economico.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Foodborne diseases impact human health and economies worldwide in terms of health care and productivity loss. Prevention is necessary and methods to detect, isolate and quantify foodborne pathogens play a fundamental role, changing continuously to face microorganisms and food production evolution. Official methods are mainly based on microorganisms growth in different media and their isolation on selective agars followed by confirmation of presumptive colonies through biochemical and serological test. A complete identification requires form 7 to 10 days. Over the last decades, new molecular techniques based on antibodies and nucleic acids allow a more accurate typing and a faster detection and quantification. The present thesis aims to apply molecular techniques to improve official methods performances regarding two pathogens: Shiga-like Toxin-producing Escherichia coli (STEC) and Listeria monocytogenes. In 2011, a new strain of STEC belonging to the serogroup O104 provoked a large outbreak. Therefore, the development of a method to detect and isolate STEC O104 is demanded. The first objective of this work is the detection, isolation and identification of STEC O104 in sprouts artificially contaminated. Multiplex PCR assays and antibodies anti-O104 incorporated in reagents for immunomagnetic separation and latex agglutination were employed. Contamination levels of less than 1 CFU/g were detected. Multiplex PCR assays permitted a rapid screening of enriched food samples and identification of isolated colonies. Immunomagnetic separation and latex agglutination allowed a high sensitivity and rapid identification of O104 antigen, respectively. The development of a rapid method to detect and quantify Listeria monocytogenes, a high-risk pathogen, is the second objective. Detection of 1 CFU/ml and quantification of 10–1,000 CFU/ml in raw milk were achieved by a sample pretreatment step and quantitative PCR in about 3h. L. monocytogenes growth in raw milk was also evaluated.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

INTRODUÇÃO: A audição é um dos sentidos mais importantes para o ser humano, e seu funcionamento está interligado à sua produtividade, o que não é diferente aos músicos, já que ela é de suma importância para a qualidade de seu trabalho e permanência na carreira. O desenvolvimento de um programa de prevenção de perdas auditivas tem por objetivo modificar o comportamento dos músicos em relação à sua audição, uma vez que, constantemente, estão expostos a níveis de pressão sonora elevados e ao surgimento de lesões irreversíveis. Contudo, se medidas preventivas não forem realizadas corretamente, as exposições dos músicos frente à intensidade sonora elevada podem trazer prejuízos à saúde e alguns destes, irreversíveis como, a Perda Auditiva Induzida por Níveis de Pressão Sonora Elevados (PAINPSE) ou Perda Auditiva Induzida por Música (PAIM). OBJETIVO GERAL: submeter os músicos ao programa de prevenção de perdas auditivas (PPPA) e verificar sua eficácia. MATERIAL E MÉTODOS: Participaram componentes de quatro bandas musicais, correspondendo a um total de 16 participantes. Esses membros foram submetidos ao Programa de Prevenção de Perdas Auditivas (PPPA) que engloba as seguintes etapas: (1) medição do nível de pressão sonora no ensaio e show; (2) entrevista específica, Audiometria Tonal Liminar e de Altas Frequências, Logoaudiometria, Imitanciometria e Emissões Otoacústicas por estímulo Transientes e Produto de Distorção; (3) orientação sobre a utilização do Equipamento de Proteção Individual (EPI); e (4) a realização de medidas educativas por meio de workshops. RESULTADOS: O Nível de Pressão Sonora (NPS) durante os ensaios e apresentações/shows, encontram-se elevados, sintomas não auditivos estão presentes em 68, 75% da população total da amostra, presença de zumbido após o show em 100% da amostra; maiores dificuldades de compreensão de fala no ruído nos músicos que tocam baixo (75%). Ao traçar o perfil audiológico do músico foram encontrados: maiores médias dos limiares audiológicos por frequência das bandas estudadas em 500Hz e 3KHz (B1), 3KHz e 4KHz (B2), 3KHz, 4KHz e 6KHz (B3) e em 3KHz (B4); as maiores médias dos limiares audiológicos por frequência dos instrumentos estudados foram em 3KHz, 4KHz e 6KHz (voz), 3KHz e 4KHz (guitarra), 3KHz, 4KHz e 6KHz (baixo) e 3KHz, 4KHz (bateria); presença de entalhe nas frequências de 2KHz, 4KHz, 6KHz e 8KHz na audiometria tonal liminar; já na audiometria de altas frequências em todas as frequências apareceram ao menos um caso, reflexos ausentes em 4KHz (ipsilateral e contralateral); ausência de resposta em 4KHz para todos os baixistas bilateralmente (100%) quando pesquisado EOE por estímulo transiente e na produto de distorção foram encontradas ausência de respostas em 50% da amostra na frequência de 6KHz, sendo assim pesquisada a curva de crescimento (dp growth rate) aparecendo resposta em 75dB em quase 100% dos casos em que houve necessidade de sua realização. Quanto aos achados obtidos da avaliação realizada pelos participantes (músicos) referente ao website, os resultados mostraram que o mesmo atende às necessidades propostas, ou seja, a promoção da saúde auditiva em músicos. CONCLUSÃO: Existe a necessidade de serem tomadas medidas preventivas e a inserção dos músicos em um Programa de Prevenção de Perdas Auditivas (PPPA) a fim de proporcioná-los maiores condições de qualidade de vida e em seu trabalho, já que necessitam da sua audição para desempenhar com eficácia suas atividades e se manter no mercado de trabalho atuando como músico.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A cold atomic cloud is a versatile object, because it offers many handles to control and tune its properties. This facilitates studies of its behavior in various circumstances, such as sample temperature, size and density, composition, dimensionality and coherence time. The range of possible experiments is constrained by the specifications of the atomic species used. In this thesis presents the work done in the experiment for laser cooling of strontium atoms, focusing on its stability, which should provide cold and ultracold samples for the study of collective effects in light scattering. From the initial apparatus, innumerous changes were performed. The vacuum system got improved and now reached lower ultra high vacuum due to the pre-baking done to its parts and adding a titanium-sublimation stage. The quadrupole trap were improved by the design and construction of a new pair of coils. The stability of the blue, green and red laser systems and the loss prevention of laser light were improved, giving rise to a robust apparatus. Another important point is the development of homemade devices to reduce the costs and to be used as a monitor of different parts of an cold atoms experiment. From this homemade devices, we could demonstrate a dramatic linewidth narrowing by injection lock of an low cost 461 nm diode laser and its application to our strontium experiment. In the end, this improved experimental apparatus made possible the study of a new scattering effect, the mirror assisted coherent back-scattering (mCBS).

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Challenges of returnable transport equipment (RTE) management continue to heighten as the popularity of their usage magnifies. Logistics companies are investigating the implementation of radio-frequency identification (RFID) technology to alleviate problems such as loss prevention and stock reduction. However, the research within this field is limited and fails to fully explore with depth, the wider network improvements that can be made to optimize the supply chain through efficient RTE management. This paper, investigates the nature of RTE network management building on current research and practices, filling a gap in the literature, through the investigation of a product-centric approach where the paradigms of “intelligent products” and “autonomous objects” are explored. A network optimizing approach with RTE management is explored, encouraging advanced research development of the RTE paradigm to align academic research with problematic areas in industry. Further research continues with the development of an agent-based software system, ready for application to a real-case study distribution network, producing quantitative results for further analysis. This is pivotal on the endeavor to developing agile support systems, fully utilizing an information-centric environment and encouraging RTE to be viewed as critical network optimizing tools rather than costly waste.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This paper presents an effective decision making system for leak detection based on multiple generalized linear models and clustering techniques. The training data for the proposed decision system is obtained by setting up an experimental pipeline fully operational distribution system. The system is also equipped with data logging for three variables; namely, inlet pressure, outlet pressure, and outlet flow. The experimental setup is designed such that multi-operational conditions of the distribution system, including multi pressure and multi flow can be obtained. We then statistically tested and showed that pressure and flow variables can be used as signature of leak under the designed multi-operational conditions. It is then shown that the detection of leakages based on the training and testing of the proposed multi model decision system with pre data clustering, under multi operational conditions produces better recognition rates in comparison to the training based on the single model approach. This decision system is then equipped with the estimation of confidence limits and a method is proposed for using these confidence limits for obtaining more robust leakage recognition results.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Acknowledgements This article is based on a doctoral research project of the first author which was sponsored by an international drilling rig operator. The views presented are those of the authors and should not be taken to represent the position or policy of the sponsor. The authors wish to thank the industrial supervisor and the drilling experts for their contribution and patience, as well as Aberdeen Drilling School for allowing the first author to attend one of their well control courses.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Introducción: La minería es considerada uno de los sectores económicos más importantes por su capacidad para generar recursos en su propio sector y en otros sectores como metalmecánica, agricultura e informática entre otros, y por su contribución al desarrollo socioeconómico sostenible de las poblaciones. Objetivo: Determinar la relación entre los riesgos percibidos por los trabajadores que laboran en minería subterránea en 3 departamentos de Colombia y los Accidentes de Trabajo (AT) y Enfermedades Laborales (EL). Materiales y Métodos: Estudio de corte transversal en 476 trabajadores de minería subterránea. Se incluyeron variables independientes (características sociodemográficas y laborales y percepción del riesgo) y variables dependientes (enfermedad laboral y accidente de trabajo), obtenidas a través de una entrevista directa aplicada por profesionales de la salud previamente capacitados. Para el análisis estadístico se utilizó la Prueba Exacta de Fisher, el Odds Ratio (OR) con el Intervalo de Confianza (IC) del 95%. Resultados: En los trabajadores de minería subterránea en los departamentos de Boyacá, Cundinamarca y Santander, se encontró relación estadística significativa entre la accidentalidad con la percepción de riesgo por iluminación (OR= 2.059, IC= 95%: 1.116, 3.798, p=0.013), percepción de riesgo por movimientos repetitivos (OR= 1.951, IC= 95%: 0.998, 3.815, p=0.034), percepción de riesgo por ruido (OR= 2.275, IC= 95%: 0.974, 5.312, p=0.039) y percepción de riesgo por manejo de cargas (OR= 1.778, IC= 95%: 0.969, 3.264, p=0.041). Conclusión: se encontró que existe una relación significativa entre la percepción de riesgo de los trabajadores de minería subterránea con accidentes de trabajo y que no existe relación entre esta percepción y las enfermedades laborales.

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Various phosphates and their mixtures were screened for their efficiency of preventing drip loss in frozen prawns. The effectiveness of the phosphates decreased in the following order: Sodium tripolyphosphate — Sodium pyrophosphate — Sodium hexametaphosphate Sodium metaphosphate — Sodium dihydrogen phosphate; the last two being ineffective. Even though thaw drip loss was reduced by the above treatments the organoleptic quality of the thawed as well as cooked products was unsatisfactory, discoloration being the major defect. A solution of a mixture of 12% sodium tripolyphosphate and 8.6% sodium dihydrogen phosphate or 2% citric acid in water when used as dip prevented thaw drip loss, improved cooked yield and organoleptic quality without adversely affecting the biochemical characteristics. Commercial scale trials showed that the results are highly reproducible.