Projecte BiblioUOC

Aquest treball de final de carrera consisteix en l'elaboració d'una aplicació per gestionar una botiga online de llibres. Per portar a terme aquesta aplicació s'utilitzarà Java 2Platform, Enterprise Edition (J2EE), una tecnologia que permet el desenvolupament ràpid d'aplicacions distribuïdes.

WWW-pohjaisen kauppapaikan palvelinkomponentin toteutus ja jatkokehitys

Diplomityössä perehdytään Java-teknologiaan yleisesti ja tarkemmin Java 2 -liiketoimintasovellusalustan (Java 2 Platform, Enterprise Edition) määritykseen sisältyviin ohjelmointirajapintoihin. Erityisesti paneudutaan Enterprise JavaBeans -liiketoimintasovellusten komponenttiarkkitehtuuriin, jonka avulla voidaan toteuttaa hajautettuja, skaalautuvia, tapahtumankäsittelyä tukevia ja turvallisia liiketoimintasovelluksia. Käytännön osa liittyy projektiin, jossa suunniteltiin ja toteutettiin WWW- pohjaisen kauppapaikan perustoiminnallisuus. Työhön sisältyivät markkinapaikan määrittelyyn ja suunnitteluun osallistuminen sekä markkinapaikan yhden palvelinkomponentin yksityiskohtainen suunnittelu, toteutus ja jatkokehityksen ideointi. Lopputuloksena saavutettiin asetetut tavoitteet täyttävä järjestelmä, joka otettiin tuotantokäyttöön ja joka on hyvä pohja järjestelmän jatkokehitysprojekteille.

Radiopacity, pH and antimicrobial activity of Portland cement associated with micro- and nanoparticles of zirconium oxide and niobium oxide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

L'inno avestico agli Aməsha Spəṇtas (Yasht 2). Testo critico e traduzione con commentario storico religioso

L'inno dedicato ai sette Amesha Spəṇta è parte della produzione avestica recenziore, e si compone in gran parte di porzioni testuali riprese da altri testi avestici a loro volta di formazione tardiva. Lo Yašt si divide in tre parti principali: le stanze 0-10; 11-14; e infine la stanza 15 che comprende la formula di chiusura tipica degli inni avestici. La prima sezione (2.0-10) è composta dalla formula di apertura, incompleta rispetto a quelle dei restanti inni, seguita dai primi sette capitoli di entrambi i Sīh-rōzag compresi i Gāh. Le stanze centrali (11-14) si caratterizzano per l'assenza di passi gemelli, un elevato numero di hapax e di arcaismi formali e inoltre, una grande variabilità nella tradizione manoscritta. Si tratta di una formula magica per esorcizzare/allontanare demoni e stregoni, che doveva essere recitata per sette volte. Tale formula probabilmente rappresentava in origine un testo autonomo che veniva recitato assieme ad altri testi avestici. La versione a noi pervenuta comprende la recitazione di parte di entrambi i Sīh-rōzag, ma è molto probabile che tale arrangement sia soltanto una sequenza recitativa che doveva coesistere assieme ad altre. Attualmente la formula magica viene recitata principalmente assieme allo Yasna Haptaŋhāiti, senza le restanti stanze dell'inno nella sua versione geldneriana. Il testo sembra nascere come formula magica la quale venne recitata assieme a diversi testi avestici come per esempio parti dello Sīh-rōzag. In un periodo impossibile da stabilire con certezza la versione viene fissata nella forma a noi pervenuta nella maggior parte dei manoscritti e per la sua affinità formale probabilmente interpretato come inno e perciò incluso nell'innario avestico.

Enabling the evolution of J2EE applications through reverse engineering and quality assurance

Enterprise Applications are complex software systems that manipulate much persistent data and interact with the user through a vast and complex user interface. In particular applications written for the Java 2 Platform, Enterprise Edition (J2EE) are composed using various technologies such as Enterprise Java Beans (EJB) or Java Server Pages (JSP) that in turn rely on languages other than Java, such as XML or SQL. In this heterogeneous context applying existing reverse engineering and quality assurance techniques developed for object-oriented systems is not enough. Because those techniques have been created to measure quality or provide information about one aspect of J2EE applications, they cannot properly measure the quality of the entire system. We intend to devise techniques and metrics to measure quality in J2EE applications considering all their aspects and to aid their evolution. Using software visualization we also intend to inspect to structure of J2EE applications and all other aspects that can be investigate through this technique. In order to do that we also need to create a unified meta-model including all elements composing a J2EE application.

Über die Kawi-sprache auf der insel Java, nebst einer einleitung über die verschiedenheit des menschlichen sprachbaues und ihren einfluss auf die geistige entwickelung des menschengeschlechts.

"Elf litographirte tafeln, die javanischen schriftzüge enthaltend, gesammelt und gezeichnet von Buschmann", at end of v. 2.

Photonic crystal fibers design for 2 μm wavelenght operation

New photonic crystal fiber designs are presented and numerically investigated in order to improve the state of art of high power fiber lasers. The focus of this work is targeted on the region of 2 μm laser emission, which is of high interest due to its eye-safe nature and due to the large amount of applications permitted. Thulium doped fiber amplifiers are suitable for emitting in this region. Different fiber designs have been proposed, both flexible and rod-type, with the aim to enlarge mode area while maintaining robust single mode operation. The analysis of thermal effects, caused by the high thulium quantum defect, have been taken in consideration. Solutions to counteract issues derived by detrimental thermal effects have been implemented.

Enhanced bone apposition to Brazilian microrough titanium surfaces

It has recently been reported that machined and microrough (micro) Brazilian titanium (Ti) implants have good production standards. The aim of this study was to evaluate in vivo bone formation around 2 different implant surfaces placed in dog's mandible. Thirty-two screw-typed Ti implants were used in this study. Mandibular premolars were extracted in 8 dogs and, after 12 weeks, 2 machined (Neodent Titamax, Brazil) and 2 micro implants (Neodent Titamax Porous, Brazil) were placed in each animal. Biopsies were taken at 3 and 8 weeks post-implantation and stained with Stevenel's blue and Alizarin red for histomorphometric measurements of bone-to-implant contact (BIC), bone area between threads (BABT) and bone area within the mirror area (BAMA). Data were analyzed statistically by two-way ANOVA (α=0.05). While at 3 weeks micro implants exhibited significantly more BIC than machined ones (55 ± 12.5% and 35.6 ± 15%, p<0.05), no significant difference in such parameter was detected at 8 weeks (51.2 ± 21% and 48.6 ± 18.1%, p>0.05). There were no significant differences in BABT and BAMA between the implants. Micro surfaces promoted higher contact osteogenesis. These data indicate that this commercial micro Ti implant surface enhances contact osteogenesis at an early post-implantation period when compared to the machined one.

Uso do QR no marketing digital: a perspetiva do utilizador português

Dissertação de Mestrado apresentada ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação de Doutor José Freitas Santos

La Botigueta de Vinils

Java 2 Plataform Enterprise J2EE, amb utilització de Spring Web, Hibernate, JavaServer Faces i ICEfaces.

Determinação espectrofotométrica de alumínio em concentrados salinos utilizados em hemodiálise empregando pré-concentração em fluxo

An automatic flow injection procedure for spectrophotometric aluminium determination in purified water and solutions containing high salts concentrations used for hemodyalisis treatment was developed. The method was base on reaction of Al3+ with cianine eriochrome R (ECR) after preconcentration using the AG50W-X8 cationic-exchange resin. Elution was carried out using a 1 % (m/v) calcium chloride solution. The manifold comprised an automatic proporcional injector controlled by a computer equipped with an eletronic interface and software written in QuicBASIC 4.5 with facilities to control the injector and perform data acquisition. Samples with concentration ranging from 4.96 to 19.90 &micro;g L-1 Al were analyzed and recoveries between 88 and 113% were obtained by using the standard addition method. Other profitable analytical characteristics such as a relative standard deviation 1.3 % (n = 10) for a typical sample 14.5 &micro;g L-1 Al, a linear response ranging up to 60.0 &micro;g L-1Al, and a sampling throughput of 10 determinations per hour were achieved. A detection limit of 4.2 &micro;g L-1 Al was estimated as suggested by IUPAC.

Produtos naturais da ascídia Botrylloides giganteum, das esponjas Verongula gigantea, Ircinia felix, Cliona delitrix e do nudibrânquio Tambja eliora, da costa do Brasil

Two new marine metabolites, 3Z, 6Z, 9Z-dodecatrien-1-ol (1) from the ascidian Botrylloides giganteum and 4H-pyran-2ol acetate from the sponge Ircinia felix (4) are herein reported. The known bromotyrosine compounds, 2-(3,5-dibromo-4-methoxyphenyl)-N,N,N-dimethylethanammonium (2) and 2,6-dibromo-4-(2-(trimethylammonium)ethyl)phenol (3), have been isolated from the sponge Verongula gigantea. Serotonin (5) is reported for the first time from the sponge Cliona delitrix, and tambjamines A (15) and D (16) isolated as their respective salts from the nudibranch Tambja eliora. Only tambjamine D presented cytotoxicity against CEM (IC50 12.2 &micro;g/mL) and HL60 (IC50 13.2 &micro;g/mL) human leukemya cells, MCF-7 breast cancer cells (IC50 13.2 &micro;g/mL), colon HCT-8 cancer cells (IC50 10.1 &micro;g/mL) and murine melanoma B16 cancer cells (IC50 6.7 &micro;g/mL).

Otimização e validação da técnica de extração líquido-líquido com partição em baixa temperatura (ELL-PBT) para piretróides em água e análise por CG

The liquid-liquid extraction with the low temperature partition technique was developed for the analysis of four pyrethroids in water by CG. Using a factorial design the extraction technique was optimised evaluating the effect of the variables ionic strength, contact time and proportion between sample and solvent volumes. The validation parameters sensitivity, precision, accuracy and detection and quantification limits were evaluated. The LOD and LOQ of the method varied from 1.1 to 3.2 &micro;g L-1 and 2.7 to 9.5 &micro;g L-1, respectively.

Cytotoxic activity of BCG-activated macrophages against L929 tumor cells is nitric oxide-dependent

The tumoricidal activity of activated macrophages has been attributed largely to the release of tumor necrosis factor (TNF), or to the production of reactive oxygen or nitrogen intermediates. The L929 tumor cell line (a murine fibroblast-like cell) when treated with actinomycin D (ActD) has been used to measure TNFa cytotoxicity. In the present study, we determined the cytotoxic activity of BCG-activated peritoneal macrophages against ActD-untreated L929 tumor cells. Furthermore, we measured the production of hydrogen peroxide (H2O2), nitric oxide (NO) and TNF by macrophages cultured in the presence or absence of L929 cells. As expected, BCG-activated macrophages produced significant amounts of H2O2 (16.0 ± 3.0 &micro;M), TNF (512 U/ml) and NO (71.5 ± 3.2 &micro;M). TNF (256 U/ml) and NO (78.9 ± 9.7 &micro;M) production was unchanged in co-cultures of L929 cells with BCG-activated macrophages but H2O2 production was totally inhibited. The cytotoxic activity was dependent on NO release since L-NAME (2.5, 5.0 and 10 mM), which blocks NO synthase, inhibited the killing of L929 cells. Addition of anti-TNF (20 &micro;g/ml) antibodies to the cultures did not affect the tumoricidal activity of macrophages. Our results indicate that macrophage-mediated killing of L929 cells is largely dependent on NO production but independent of H2O2 or TNF release.