Effectiveness of a Differential Temperature Controller on a Solar Water Heating System: An Experimental Study

A differential temperature controller is incorporated in a solar water heating system to study the influence of its set points on system performance. The effectiveness of the controller set points DeltaT ON and DeltaT OFF on the pump cycling and energy collection has been studied experimentally and the results are presented in this paper.

In situ hydrate dissociation using microwave heating: Preliminary study

In this work, we investigate the dissociation behavior of natural gas hydrate in a closed system with microwave (MW) heating and hot water heating. The hydrate was formed at temperatures of 1-4 degrees C and pressures of 4.5-5.5 MPa. It was found that the gas hydrate dissociated more rapidly with microwave than with hot water heating. The rate of hydrate dissociation increased with increasing microwave power, and it was a function of microwave power. Furthermore, the temperature of the hydrate increased linearly with time during the microwave radiation.

In hot water: zooplankton and climate change

An overview is provided of the observed and potential future responses of zooplankton communities to global warming. I begin by describing the importance of zooplankton in ocean ecosystems and the attributes that make them sensitive beacons of climate change. Global warming may have even greater repercussions for marine ecosystems than for terrestrial ecosystems, because temperature influences water column stability, nutrient enrichment, and the degree of new production, and thus the abundance, size composition, diversity, and trophic efficiency of zooplankton. Pertinent descriptions of physical changes in the ocean in response to climate change are given as a prelude to a detailed discussion of observed impacts of global warming on zooplankton. These manifest as changes in the distribution of individual species and assemblages, in the timing of important life-cycle events, and in abundance and community structure. The most illustrative case studies, where climate has had an obvious, tangible impact on zooplankton and substantial ecosystem consequences, are presented. Changes in the distribution and phenology of zooplankton are faster and greater than those observed for terrestrial groups. Relevant projected changes in ocean conditions are then presented, followed by an exploration of potential future changes in zooplankton communities from the perspective of different modelling approaches. Researchers have used a range of modelling approaches on individual species and functional groups forced by output from climate models under future greenhouse gas emission scenarios. I conclude by suggesting some potential future directions in climate change research for zooplankton, viz. the use of richer zooplankton functional groups in ecosystem models; greater research effort in tropical systems; investigating climate change in conjunction with other human impacts; and a global zooplankton observing system.

Intelligent demand response electric water heating to integrate wind power in Ireland

Dwindling fossil fuel resources and pressures to reduce greenhouse gas (GHG) emissions will result in a more diverse range of generation portfolios for future electricity systems. Irrespective of the portfolio mix the overarching requirement for all electricity suppliers and system operators is that supply instantaneously meets demand and that robust operating standards are maintained to ensure a consistent supply of high quality electricity to end-users. Therefore all electricity market participants will ultimately need to use a variety of tools to balance the power system. Thus the role of demand side management (DSM) with energy storage will be paramount to integrate future diverse generation portfolios. Electric water heating (EWH) has been studied previously, particularly at the domestic level to provide load control, peak shave and to benefit end-users financially with lower bills, particularly in vertically integrated monopolies. In this paper, a continuous Direct Load Control (DLC) EWH algorithm is applied in a liberalized market environment using actual historical electricity system and market data to examine the potential energy savings, cost reductions and electricity system operational improvements.

Integrating wind power using intelligent electric water heating

Dwindling fossil fuel resources and pressures to reduce greenhouse gas emissions will result in a more diverse range of generation portfolios for future electricity systems. Irrespective of the portfolio mix the overarching requirement for all electricity suppliers and system operators is to instantaneously meet demand, to operate to standards and reduce greenhouse gas emissions. Therefore all electricity market participants will ultimately need to use a variety of tools to balance the power system. Thus the role of demand side management with energy storage will be paramount to integrate future diverse generation portfolios. Electric water heating has been studied previously, particularly at the domestic level to provide load control, peak shave and to bene?t end-users ?nancially with lower bills, particularly in vertically integrated monopolies. In this paper a number of continuous direct load control demand response based electric water heating algorithms are modelled to test the effectiveness of wholesale electricity market signals to study the system bene?ts. The results are compared and contrasted to determine which control algorithm showed the best potential for energy savings, system marginal price savings and wind integration.

Bioassay-guided fractionation of Larix laricina du Roi, and antidiabetic potentials of ethanol and hot water extracts of seventeen medicinal plants from the traditional pharmacopeia of the James Bay Cree

Nous avons utilisé une approche ethnobotanique pour identifier des espèces de plantes utilisées par les Cris afin de traiter les symptômes du diabète de type 2. Larix laricina du Roi (L. laricina) a récemment été identifiée comme une des meilleures plantes qui a stimulé le transport de glucose dans les cellules C2C12 et fortement potentialisé la différenciation des 3T3-L1 en indiquant une sensibilité potentiellement accrue à l’insuline. Ensuite, ces études de criblage ont été effectuées sur des extraits éthanolique (EE) en utilisant une série de bioessais in vitro. Cependant, les préparations traditionnelles des plantes sont souvent faites avec l’eau chaude. Le but de cette thèse de doctorat était d’isoler les principes actifs de L. laricina par un fractionnement guidé par l’adipogenèse; d’évaluer et de comparer l’activité et les mécanismes antidiabétiques des EE et des extraits aqueux (HWE) de ces 17 plantes. Pour le fractionnement de L. laricina, on a isolé plusieurs composés connus et identifié un nouveau composé actif cycloartane triterpene, qui a amélioré fortement l’adipogenèse et a été responsable en partie de l’activité adipogénique (potentiellement similaire à l’effet sensibilisateur à l’insuline des glitazone) de l’extrait éthanolique issu de l’écorce de L. laricina. Pour le métabolisme lipidique, nos résultats ont confirmé que 10 parmi les 17 EE ont augmenté la différenciation des adipocytes alors que 2 extraits seulement l’ont inhibée. Les HWE ont montré une faible activité adipogénique ou antiadipogénique. Les EE de R. groenlandicum et K. angustifolia ont le PPAR γ (peroxisome proliferator-activated receptor γ), le SREBP-1 (sterol regulatory element binding protein-1) et le C/EBP (CCAAT-enhancer binding proteins) α, alors que ceux de P. balsamifera et A. incana les ont inhibés. L’effet inhibiteur de P. balsamifera a également été prouvé d’avoir impliqué l’activation de la protéine kinase activée par l’AMP (AMPK). Les EE et HWE de R. groenlandicum ont stimulé les mêmes facteurs de transcription alors que les extraits aqueux d’autres plantes sélectionnées ont perdu ces effets en comparaison avec leurs extraits éthanoliques respectifs. L’analyse phytochimique a également identifié le groupe des espèces actives et inactives, notamment lorsque les espèces ont été séparées par famille de plante. Finalement concernant l’homéostasie de glucose, nos résultats ont confirmé que plusieurs EE ont stimulé le transport de glucose musculaire et inhibé l’activité de la glucose-6-phosphatase (G6Pase) hépatique. Certains des HWE ont partiellement ou complètement perdu ces activités antidiabétiques par rapport aux EE, tandis qu’une seule plante (R.groenlandicum) a juste conservé un potentiel similaire entre les EE et HWE dans les deux essais. Dans les cellules musculaires, les EE de R.groenlandicum, A. incana et S. purpurea ont stimulé le transport de glucose en activant la voie de signalisation de l’AMPK et en augmentant le niveau d’expression des GLUT4. En comparaison avec les EE, les HWE de R.groenlandicum ont montré des activités similaires; les HWE de A. incana ont complètement perdu leur effet sur tous les paramètres étudiés; les HWE de S. purpurea ont activé la voie de l’insuline au lieu de celle de l’AMPK pour augmenter le transport de glucose. Dans les cellules H4IIE, les EE et HWE des 5 plantes ont activé la voie de l’AMPK, et en plus les EE et HWE de 2 plantes ont activé la voie de l’insuline. La quercétine-3-O-galactoside et la quercétine 3-O-α-L-arabinopyranoside ont été identifiées comme des composés ayant un fort potentiel antidiabétique et donc responsables de l'activité biologique des plantes HWE actifs avec le transport du glucose. En conclusion, on a isolé plusieurs composés connus et identifié un nouveau triterpène actif à partir du fractionnement de L. laricina. Nous avons fourni également une preuve directe pour l'évaluation et la comparaison d'une action analogue à l'insuline ou insulino-sensibilisateur des EE et HWE de plantes médicinales Cris au niveau de muscle, de foie et de tissus adipeux. Une partie de leur action peut être liée à la stimulation des voies de signalisation intracellulaire insulino-dépendante et non-insulino-dépendante, ainsi que l’activation de PPARγ. Nos résultats indiquent que les espèces de plantes, les tissus ou les cellules cibles, ainsi que les méthodes d'extraction sont tous des déterminants significatifs de l'activité biologique de plantes médicinales Cris sur le métabolisme glucidique et lipidique.

Electricity, hot water and cold water production from biomass. Energetic and economical analysis of the compact system of cogeneration run with woodgas from a small downdraft gasifier

Wood gasification technologies to convert the biomass into fuel gas stand out. on the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn't exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.

Postharvest conservation of 'Tommy Atkins' mango fruit influenced by gamma radiation, wax, hot water, and refrigeration

It was aimed to extend the postharvest conservation of 'Tommy Atkins' mango fruits harvested in break maturity stage. Fruits were submitted at the following treatments: hot water treatment (55°C for 5 minutes) and benomyl 1,000 mg.L-1; irradiation with 0,8 or 1,0 kGy; irradiation associated at carnaúba wax; and control. The fruits were stored at 10°C and 85 - 90%RH during 21 days, and then removed to ambient temperature (25,7±0,7°C and 87,1±2,2%RH). Through the storage time, the evolution of fresh weight, color, rottenness, total soluble solids (TSS), total titratable acidity (TTA), and TSS/TTA ratio were measured. 'Tommy Atkins' mango fruits can have shelf life notably increased, when they were submitted to hot water treatment (55°C for 5 minutes) or γ radiation (0,8 and 1,0 kGy), associated with carnaúba wax application, before cold storage. These treatments increased the fruit resistance at refrigerated storage, and improved shelflife after transferring to ambient temperature.

Brazilian solar water heating systems evaluation

The Brazilian National Electricity Conservation Program - PROCEL - runs regular surveys in the electric-energy-consumption market. These studies are used as valuable data to better plan the actions of this program. These data also evaluate the program's performance by identifying the level of penetration of the most efficient electric equipment within the residential sector. PROCEL's main lines of action is to promote and make available the most efficient technologies. Based on the results from the latest survey, it is estimated that 24% of the electric-energy consumption of the residential sector is used by electric shower devices, which instantaneously heat the water that flows through them, normally using an electric resistance of 5 kW. These are an important factor in a country where electric-heating devices are present in about 73% of Brazilian households. Keeping that in mind, the purpose of this work is to present the main results of the Brazilian Solar-Water-Heating-Systems Evaluation, finished in 2010, where 535 installations were visited and more than 50 researchers from different universities participated in the project. Moreover, seven Brazilian cities were selected to be studied. The information was collected from field research and statistically treated. The collected information focused on the adequacy of the project to the household, installation, operation and life cycle of the systems, as well as the users' satisfaction level. Technical questionnaires were developed to summarize all the required information, such as a Web site designed to organize and manage the data collected and a Matlab application that performed the dimensioning and F-chart systems evaluation. Quality indicators were created through a full system monitoring, with thermographic analysis and evaluation of shading influence at the system's efficiency, using the Ecotect software.

Low liquid-solid ratio (LSR) hot water pretreatment of sugarcane bagasse

Low liquid-solid ratio (LSR) can be used to obtain high-content xylo-oligosaccharide (XOS) spend liquor by hot water pretreatment. Developing a technology based on low LSR results in more efficient water usage in the system and thus in lower capital and operating costs. Xylans from xylan rich agro-industrial waste are abundant hemicellulosic polymers with enormous potential for industrial applications. Currently, freeze-dried xylo-oligosaccharides are used as bio-based polymers and hydrolysates containing high xylose contents are converted to several chemical products. In this study, sugarcane bagasse was treated with water at low LSRs and mild temperatures in order to assess the effects of varying the pretreatment conditions on the xylo-oligosaccharide and xylose concentrations, and use a central composite experimental design to optimize the process parameters. The pretreatments were performed in the ranges temperature: 143.3-176.7 degrees C, time: 20-70 min and LSR: 1 : 1 to 11 : 1 (g g(-1)). The maximum concentrations of xylose and xylan were 13.76 and 36.18 g L-1 (equivalent to 48.29 g L-1 of xylan), respectively, which were achieved by treating bagasse at 170 degrees C for 60 min, with LSR of 3 g g(-1). The amount of xylan removed under these conditions was almost 57%. The soluble xylan consisted mainly of xylo-oligosaccharides (74 wt% of the identified compound in the spent liquor).

Domestic hot water consumption vs. solar thermal energy storage: the optimum size of the storage tank

Many efforts have been made in order to adequate the production of a solar thermal collector field to the consumption of domestic hot water of the inhabitants of a building. In that sense, much has been achieved in different domains: research agencies, government policies and manufacturers. However, most of the design rules of the solar plants are based on steady state models, whereas solar irradiance, consumption and thermal accumulation are inherently transient processes. As a result of this lack of physical accuracy, thermal storage tanks are sometimes left to be as large as the designer decides without any aforementioned precise recommendation. This can be a problem if solar thermal systems are meant to be implemented in nowadays buildings, where there is a shortage of space. In addition to that, an excessive storage volume could not result more efficient in many residential applications, but costly, extreme in space consumption and in some cases too heavy. A proprietary transient simulation program has been developed and validated with a detailed measurement campaign in an experimental facility. In situ environmental data have been obtained through a whole year of operation. They have been gathered at intervals of 10 min for a solar plant of 50 m2 with a storage tank of 3 m3, including the equipment for domestic hot water production of a typical apartment building. This program has been used to obtain the design and dimensioning criteria of DHW solar plants under daily transient conditions throughout a year and more specifically the size of the storage tank for a multi storey apartment building. Comparison of the simulation results with the current Spanish regulation applicable, “Código Técnico de la Edificación” (CTE 2006), offers fruitful details and establishes solar facilities dimensioning criteria.