Nonlinear dynamics and control strategies: On a energy harvester vibrating system with a linear form to non-ideal motor torque

In this paper, we deal with the research of a vibrating model of an energy harvester device, including the nonlinearities in the model of the piezoelectric coupling and the non-ideal excitation. We show, using numerical simulations, in the analysis of the dynamic responses, that the harvested power is influenced by non-linear vibrations of the structure. Chaotic behavior was also observed, causing of the loss of energy throughout the simulation time. Using a perturbation technique, we find an approximate analytical solution for the non-ideal system. Then, we apply both two control techniques, to keep the considered system, into a stable condition. Both the State Dependent Ricatti Equation (SDRE) control as the feedback control by changing the energy of the oscillator, were efficient in controlling of the considered non-ideal system.

Avaliação técnica e econômica da colheita de florestas de eucalipto com harvester

The acquisition of machinery used in timber harvesting depends on high financial investment, which implies the need for assessments that allow defining more precisely, what is the machine or the whole more recommended for streamlining the operation. This study aimed to technically and economically evaluating the performance of a harvester in Eucalyptus forest harvest first cut. The technique analysis included a time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. The results obtained from the technological-economic parameters evidenced that of Diameter at Breast Height directly influenced the productivity of harvester. Consequently the lower costs of forest harvest were obtained for the compartments with wider diameter trees.

EC27-811 Harvesting Wheat in Nebraska with the Combined Harvester Thresher 1926

Frequent inquiry from wheat growers in Nebraska and others as to the relative merits of the combined harvester-thresher as an efficienct and economical harvesting machine led the Nebraska Agricultural College to make a study of this problem in the summer of 1926. The work was carried on by the Departments of Rural Economics and Agricultural Engineering, cooperating with the United States Department of Agriculture which was conducting a similar survey in different parts of the United States. Perkins county, Nebraska, was the area selected for study as it is more or less typical of those parts of the state where combines are used extensively. The purpose of this circular is merely to give such informaition as is available regarding harvesting costs by different methods in Nebraska and not to recommend one method over another since location, acreage, climatic conditions, and topopgraphy all have their influence in determining the most economic method for different communities.

Design and Realization of an Energy Harvester Using Pulsating Arterial Pressure

Most medical implants run on batteries, which require costly and tedious replacement or recharging. It is believed that micro-generators utilizing intracorporeal energy could solve these problems. However, such generators do not, at this time, meet the energy requirements of medical implants.This paper highlights some essential aspects of designing and implementing a power source that scavenges energy from arterial expansion and contraction to operate an implanted medical device. After evaluating various potentially viable transduction mechanisms, the fabricated prototype employs an electromagnetic transduction mechanism. The artery is inserted into a laboratory-fabricated flexible coil which is permitted to freely deform in a magnetic field. This work also investigates the effects of the arterial wall's material properties on energy harvesting potential. For that purpose, two types of arteries (Penrose X-ray tube, which behave elastically, and an artery of a Göttinger minipig, which behaves viscoelastically) were tested. No noticeable difference could be observed between these two cases. For the pig artery, average harvestable power was 42 nW. Moreover, peak power was 2.38 μW. Both values are higher than those of the current state of the art (6 nW/16 nW). A theoretical modelling of the prototype was developed and compared to the experimental results.

Truck noise IV-A: project summary - the reduction of noise levels on the International Harvester quieted truck. Final report.

Transportation Department, Office of Noise Abatement, Washington, D.C.

A rotary seed harvester for crimson clover.

Mode of access: Internet.

The Harvester world.

Description based on: Vol. 8, no. 1 (Jan. 1917); title from cover.

Harvesting wheat with a combined harvester-thresher in the Great Plains region, 1926. By R. S. Kifer, W. R. Humphries [and] J. H. Martin. A preliminary report. April, 1927.

Caption-title.

Operator, organizational, direct support, and general support maintenance manual for tester, fuel injector pump : single end drive, 150 to 3600 RPM (4910-01-037-9417) and adapter kits, fuel injector : American Bosch APE-6BB (4910-01-005-2850), American Bosch PSB-6A and PSB-6 (4910-01-005-2851), American Bosch PSB-12BT (4910-01-005-2852), Simmonds SU (4910-01-005-2853), International Harvester 3200 (4910-01-006-3073), American Bosch PSJ-6A (4910-01-006-3072), Caterpillar (4910-01-005-2854), Roosa Master (4910-01-005-2855), and Cummins (4910-00-763-7495).

Description based on vol. 1.

Organizational maintenance repair parts and special tools lists : tractor, wheeled, diesel engine driven, w/backhoe and front loader, (International Harvester model 3414), FSN 2420-900-8538.

Includes index.

In the matter of International Harvester Company, East Moline Works, and United Farm Equipment and Metal Workers of America, Local 104 (CIO) : proceeding of arbitration, allowance rule grievances.

Mode of access: Internet.

Changes in the properties of a Vertisol and responses of wheat after compaction with harvester traffic

Soil compaction has been recognised as the greatest problem in terms of damage to Australia's soil resource. Compaction by tractor and harvester tyres, related to trafficking of wet soil, is one source of the problem. In this paper an array of soil properties was measured before and immediately after the application of a known compaction force to a wet Vertisol, A local grain harvester was used on soil that was just trafficable; a common scenario at harvest. The primary aim was to determine the changes in various soil properties in order to provide a benchmark against which the effectiveness of future remedial treatments could be evaluated. A secondary aim was a comparison of the measurements' efficiency to assess a soil's structural degradation status. Also assessed was the subsequent effect of the applied compaction on wheat growth and yield in the following cropping season. Nine of the soil properties measured gave statistically significant differences as a result of the soil compaction. Differences were mostly restricted to the top 0.2 m of the soil. The greatest measured depth of effect was decreased soil porosity to 0.4 m measured from intact soil clods. There was 72% emergence of the wheat crop planted into the compact soil and 93% in the uncompact soil. Wheat yield, however, was not affected by the compaction. This may demonstrate that wheat, growing on a full profile of stored soil water as did the current crop, may be little affected by compaction, Also, wheat may have potential to facilitate rapid repair of the damage in a Vertisol such as the current soil by drying the topsoil between rainfall events so increasing shrinking and swelling cycles. If this is true, then sowing a suitable crop species in a Vertisol may be a better option than tillage for repairing compaction damage by agricultural traffic. (C) 2000 Elsevier Science B.V. All rights reserved.

A 3D printed electromagnetic nonlinear vibration energy harvester

A 3D printed electromagnetic vibration energy harvester is presented. The motion of the device is in-plane with the excitation vibrations, and this is enabled through the exploitation of a leaf isosceles trapezoidal flexural pivot topology. This topology is ideally suited for systems requiring restricted out-of-plane motion and benefits from being fabricated monolithically. This is achieved by 3D printing the topology with materials having a low flexural modulus. The presented system has a nonlinear softening spring response, as a result of designed magnetic force interactions. A discussion of fatigue performance is presented and it is suggested that whilst fabricating, the raster of the suspension element is printed perpendicular to the flexural direction and that the experienced stress is as low as possible during operation, to ensure longevity. A demonstrated power of ~25 μW at 0.1 g is achieved and 2.9 mW is demonstrated at 1 g. The corresponding bandwidths reach up-to 4.5 Hz. The system's corresponding power density of ~0.48 mW cm−3 and normalised power integral density of 11.9 kg m−3 (at 1 g) are comparable to other in-plane systems found in the literature.

Frequency adjustable MEMS vibration energy harvester

Ambient mechanical vibrations offer an attractive solution for powering the wireless sensor nodes of the emerging "Internet-of-Things". However, the wide-ranging variability of the ambient vibration frequencies pose a significant challenge to the efficient transduction of vibration into usable electrical energy. This work reports the development of a MEMS electromagnetic vibration energy harvester where the resonance frequency of the oscillator can be adjusted or tuned to adapt to the ambient vibrational frequency. Micro-fabricated silicon spring and double layer planar micro-coils along with sintered NdFeB micro-magnets are used to construct the electromagnetic transduction mechanism. Furthermore, another NdFeB magnet is adjustably assembled to induce variable magnetic interaction with the transducing magnet, leading to significant change in the spring stiffness and resonance frequency. Finite element analysis and numerical simulations exhibit substantial frequency tuning range (25% of natural resonance frequency) by appropriate adjustment of the repulsive magnetic interaction between the tuning and transducing magnet pair. This demonstrated method of frequency adjustment or tuning have potential applications in other MEMS vibration energy harvesters and micromechanical oscillators.

A low frequency MEMS energy harvester scavenging energy from magnetic field surrounding an AC current-carrying wire

This paper reports on a low frequency piezoelectric energy harvester that scavenges energy from a wire carrying an AC current. The harvester is described, fabricated and characterized. The device consists of a silicon cantilever with integrated piezoelectric capacitor and proof-mass that incorporates a permanent magnet. When brought close to an AC current carrying wire, the magnet couples to the AC magnetic field from a wire, causing the cantilever to vibrate and generate power. The measured average power dissipated across an optimal resistive load was 1.5 μW. This was obtained by exciting the device into mechanical resonance using the electro-magnetic field from the 2 A source current. The measurements also reveal that the device has a nonlinear response that is due to a spring hardening mechanism.