Trajectory mapping of middle atmospheric water vapor by a mini network of NDACC instruments

The important task to observe the global coverage of middle atmospheric trace gases like water vapor or ozone usually is accomplished by satellites. Climate and atmospheric studies rely upon the knowledge of trace gas distributions throughout the stratosphere and mesosphere. Many of these gases are currently measured from satellites, but it is not clear whether this capability will be maintained in the future. This could lead to a significant knowledge gap of the state of the atmosphere. We explore the possibilities of mapping middle atmospheric water vapor in the Northern Hemisphere by using Lagrangian trajectory calculations and water vapor profile data from a small network of five ground-based microwave radiometers. Four of them are operated within the frame of NDACC (Network for the Detection of Atmospheric Composition Change). Keeping in mind that the instruments are based on different hardware and calibration setups, a height-dependent bias of the retrieved water vapor profiles has to be expected among the microwave radiometers. In order to correct and harmonize the different data sets, the Microwave Limb Sounder (MLS) on the Aura satellite is used to serve as a kind of traveling standard. A domain-averaging TM (trajectory mapping) method is applied which simplifies the subsequent validation of the quality of the trajectory-mapped water vapor distribution towards direct satellite observations. Trajectories are calculated forwards and backwards in time for up to 10 days using 6 hourly meteorological wind analysis fields. Overall, a total of four case studies of trajectory mapping in different meteorological regimes are discussed. One of the case studies takes place during a major sudden stratospheric warming (SSW) accompanied by the polar vortex breakdown; a second takes place after the reformation of stable circulation system. TM cases close to the fall equinox and June solstice event from the year 2012 complete the study, showing the high potential of a network of ground-based remote sensing instruments to synthesize hemispheric maps of water vapor.

GEMS-GLORI world river discharge database

The GEMS-GLORI register, circulated by UNEP for review in 1996, lists 555 world major rivers discharging to oceans (Q > 10 km**3/year, or A > 10 000 km**2, or sediment discharge > 5Mt/year, or basin population >5M people). Up to 48 river attributes are listed, including major ions and nutrients (C, N, P) in both dissolved, particulate, organic and inorganic forms. For many rivers, two or three sets of data are provided with relevant periods of records and references. Although half of the selected rivers are not yet documented for water quality, most of the first 40 rivers are well described (Irrawady, Zambezi, Ogooue, Magdalena, are noted exceptions). Altogether about 10 000 individual data from 500 references are listed. The global coverage in terms of river discharge and/or drainage area ranges from 40 to 67% for most major water quality attributes but drops to 25% for some organic and/or particulate forms of N and P. Planned development of the register includes collection of information on particulate chemistry and data on endorheic rivers and selected tributaries.

Análisis de bocinas en MatLab

El presente proyecto parte de un programa utilizado en las prácticas de laboratorio en la asignatura Antenas y Compatibilidad Electromagnética del sexto semestre llamado SABOR, que pretende ser actualizado para que en las nuevas versiones de los sistemas operativos ofrecidos por la compañía Windows pueda ser operativo. El objetivo principal será diseñar e implementar nuevas funcionalidades así como desarrollar mejoras y corregir errores del mismo. Para su mejor entendimiento se ha creado una herramienta en entorno MATLAB para analizar uno de los tipos más comunes de Apertura que se utilizan actualmente, las bocinas. Dicha herramienta es una interfaz gráfica que tiene como entradas las variables elementales de diseño de la apertura como por ejemplo: dimensiones de la propia bocina o los parámetros generales comunes a todas ellas. A su vez, el software nos genera algunos de los parámetros de salida fundamentales de las antenas: Directividad, Ancho de haz, Centro de fase y Spillover. Para el correcto desarrollo del software se ha realizado numerosas pruebas con el fin de depurar y corregir errores con respecto a la anterior versión del SABOR. Por otra parte se ha hecho también hincapié en la funcionalidad del programa para que sea más intuitivo y evitar complejidades. El tipo de antena que se pretende estudiar es la bocina que consiste en una guía de onda en la cual el área de la sección se va incrementando progresivamente hasta un extremo abierto, que se comporta como una apertura. Se utilizan extensamente en satélites comerciales para coberturas globales desde órbitas geoestacionarias, pero el uso más común es como elemento de radiación para reflectores de antenas. Los tipos de bocinas que se van a examinar en la herramienta son: Sectorial H, Sectorial E, Piramidal, Cónica, Cónica Corrugada y Piramidal Corrugada. El proyecto está desarrollado de manera que pueda servir de información teórico-práctico de todo el software SABOR. Por ello, el documento además de revisar la teoría de las bocinas analizadas, mostrará la información relacionada con la programación orientado a objetos en entorno MATLAB cuyo objetivo propio es adquirir una nueva forma de pensamiento acerca del proceso de descomposición de problemas y desarrollo de soluciones de programación. Finalmente se ha creado un manual de autoayuda para dar soporte al software y se han incluido los resultados de diversas pruebas realizadas para poder observar todos los detalles de su funcionamiento, así como las conclusiones y líneas futuras de acción. ABSTRACT This Project comes from a program used in the labs of the subject Antennas and Electromagnetic Compatibility in the sixth semester called SABOR, which aims to be updated in order to any type of computer running a Windows operating systems(Windows 7 and subsequent versions). The main objectives are design and improve existing functionalities and develop new features. In addition, we will correct mistakes in earlier versions. For a better understanding a new custom tool using MATLAB environment has been created to analyze one of the most common types of apertura antenna which is used for the moment, horns. This tool is a graphical interface that has elementary design variables as a inputs, for example: Dimensions of the own horn or common general parameters of all horns. At the same time, the software generate us some of the fundamental parameters of antennas output like Directivity, Beamwidth, Phase centre and Spillover. This software has been performed numerous tests for the proper functioning of the Software and we have been cared in order to debug and correct errors that were detected in earlier versions of SABOR. In addition, it has also been emphasized the program's functionality in order to be more intuitive and avoiding unnecessary barriers or complexities. The type of antenna that we are going to study is the horn which consists of a waveguides which the section area has been gradually increasing to an open-ended, that behaves as an aperture. It is widely used in comercial satellites for global coverage from geostationary orbits. However, the most common use is radiating element for antenna reflectors. The types of horns which is going to be considered are: Rectangular H-plane sectorial, Rectangular E-plane sectorial, Rectangular Pyramidal, Circular, Corrugated Circular and Corrugated Pyramidal. The Project is developed so that it can be used as practical-theorical information around the SABOR software. Therefore, In addition to thoroughly reviewing the theory document of analyzed horns, it display information related to the object-oriented programming in MATLAB environment whose goal leads us to a new way of thinking about the process of decomposition of problems and solutions development programming. Finally, it has been created a self-help manual in order to support the software and has been included the results of different tests to observe all the details of their operations, as well as the conclusions and future action lines.

Aprendizaje, simulación y desarrollo sobre las tecnologías de voz y datos

El objetivo del Proyecto Fin de Carrera (PFC) es el de conocer, simular y crear una red VoIP sobre una red de datos en un entorno docente, más concretamente, en la asignatura Redes y Servicios de telecomunicación en Grado en Ingeniería de Telecomunicaciones en la Universidad Politécnica de Madrid (UPM). Una vez se adquieran los conocimientos necesarios, se propondrán una serie de prácticas para que los alumnos se vayan familiarizando con el software y hardware utilizados, de manera que, se irá subiendo el grado de dificultad hasta que puedan realizar una auténtica red VoIP por sí mismos. A parte de la realización de las prácticas, los alumnos deberán pasar una prueba de los conocimientos adquiridos al final de cada práctica mediante preguntas tipo test. Los sistemas elegidos para la implantación de una red VoIP en los módulos de laboratorio son: 3CX System Phone y Asteisk-Trixbox. Los cuales, son capaces de trabajar mediante gestores gráficos para simplificar el nivel de dificultad de la configuración. 3CX es una PBX que trabaja sobre Windows y se basa exclusivamente en el protocolo SIP. Esto facilita el manejo para usuarios que solo han usado Windows sin quitar funcionalidades que tienen otras centralitas en otros sistemas operativos. La versión demo activa todas las opciones para poder familiarizarse con este sistema. Por otro lado, Asterisk trabaja en todas las plataformas, aunque se ha seleccionado trabajar sobre Linux. Esta selección se ha realizado porque el resto de plataformas limitan la configuración de la IP PBX, esta es de código abierto y permite realizar todo tipo de configuraciones. Además, es un software gratuito, esto es una ventaja a la hora de configurar novedades o resolver problemas, ya que hay muchos especialistas que dan soporte y ayudan de forma gratuita. La voz sobre Internet es habitualmente conocida como VoIP (Voice Over IP), debido a que IP (Internet Protocol) es el protocolo de red de Internet. Como tecnología, la VoIP no es solo un paso más en el crecimiento de las comunicaciones por voz, sino que supone integrar las comunicaciones de datos y las de voz en una misma red, y en concreto, en la red con mayor cobertura mundial: Internet. La mayor importancia y motivación de este Proyecto Fin de Carrera es que el alumno sea capaz de llegar a un entorno laboral y pueda tener unos conocimientos capaces de afrontar esta tecnología que esta tan a la orden del día. La importancia que estas redes tienen y tendrán en un futuro muy próximo en el mundo de la informática y las comunicaciones. Cabe decir, que se observa que estas disciplinas tecnológicas evolucionan a pasos agigantados y se requieren conocimientos más sólidos. ABSTRACT. The objective of my final project during my studies in university was, to simulate and create a VoIP network over a data network in a teaching environment, more specifically on the subject of telecommunications networks and services in Telecommunication Engineering Degree in Polytechnic University of Madrid (UPM). Once acquiring the necessary knowledge a number of practices were proposed to the students to become familiar with the software and hardware used, so that it would rise to the level of difficulty that they could make a real VoIP network for themselves. Parts of the experimental practices were that students must pass a test of knowledge acquired at the end of each practice by choice questions. The systems chosen for the implementation of a VoIP network in the laboratory modules are: 3CX Phone System and Asteisk - Trixbox. Which were able to work with graphics operators to simplify the difficulty level of the configuration. 3CX is a PBX that works on Windows and is based solely on the SIP protocol. This facilitates handling for users who have only used Windows without removing functionality with other exchanges in other operating systems. Active demo version all options to get to grips with this system. Moreover, Asterisk works on all platforms, but has been selected to work on Linux. This selection was made because other platforms limit the IP PBX configuration, as this is open source and allows all kinds of configurations. Also, Linux is a free software and an advantage when configuring new or solve problems, as there are many specialists that support and help for free. Voice over Internet is commonly known as VoIP (Voice Over IP), because IP (Internet Protocol) is the Internet protocol network. As technology, VoIP is not just another step in the growth of voice communications, but communications of integrating data and voice on a single network, and in particular, in the network with the largest global coverage: Internet. The increased importance and motivation of this Thesis is that the student is able to reach a working environment and may have some knowledge to deal with these technologies that is so much the order of the day. The importances of these networks have and will be of essences in the very near future in the world of computing and communications. It must be said it is observed that these technological disciplines evolve by leaps and bounds stronger knowledge required.

Reducing errors in simulated satellite views of clouds from large-scale models

Thesis (Ph.D.)--University of Washington, 2016-06

Sampling uncertainty in gridded sea surface temperature products and Advanced Very High Resolution Radiometer (AVHRR) Global Area Coverage (GAC) data

Sea surface temperature (SST) data are often provided as gridded products, typically at resolutions of order 0.05 degrees from satellite observations to reduce data volume at the request of data users and facilitate comparison against other products or models. Sampling uncertainty is introduced in gridded products where the full surface area of the ocean within a grid cell cannot be fully observed because of cloud cover. In this paper we parameterise uncertainties in SST as a function of the percentage of clear-sky pixels available and the SST variability in that subsample. This parameterisation is developed from Advanced Along Track Scanning Radiometer (AATSR) data, but is applicable to all gridded L3U SST products at resolutions of 0.05-0.1 degrees, irrespective of instrument and retrieval algorithm, provided that instrument noise propagated into the SST is accounted for. We also calculate the sampling uncertainty of ~0.04 K in Global Area Coverage (GAC) Advanced Very High Resolution Radiometer (AVHRR) products, using related methods.

Expanding a Global Company Management System to An Integrated Coverage of Several Standards

This Master’s thesis examines the implementation of management system standard requirements as integrated in the organization. The aim is to determine how requirements from management system standards ISO 14001:2015 and ISO 9001:2015 can be integrated and implemented into the existing ISO 9001:2008 compliant management system. Research was executed as action research by utilizing an operating model about the integrated use of management system standards created by the International Organization for Standardization. Phases of the operating model were applied to the target organization. The similarity and integration potential of relevant standards were assessed by using comparative matrices. Allocation of the requirements and conformity assessment of the processes was executed by gap analysis. The main results indicate that the requirements of the relevant standards are principally equivalent or have the same kind of purpose. The results also show the most important processes of the target organization in terms of requirement compliance, as well as the requirements which affect the process the most. Prioritizing the compliance achievement of the most important processes and implementation of those requirements that have the most effect create an opportunity for organizations to implement the integrated requirements effectively.

Perceptions of the usefulness of external support to immunization coverage in Guinea-Bissau: a Delphi analysis of the GAVI-Alliance cash-based support

INTRODUCTION: Although many countries have improved vaccination coverage in recent years, some, including Guinea-Bissau, failed to meet expected targets. This paper tries to understand the main barriers to better vaccination coverage in the context of the GAVI-Alliance (The Global Alliance for Vaccines and Immunisation) cash-based support provided to Guinea-Bissau. METHODS: The analysis is based on a document analysis and a three round Delphi study with a final consensus meeting. RESULTS: Consensus attributed about 25% of the failure to perform better to implementation problems; and about 10% to governance and also 10% to scarce resources. The qualitative analysis validates the importance of implementation issues and upgraded the relevance of the human resources crisis as an important drawback. The recommendations were balanced in their upstream-downstream focus but were blind to health information issues and logistical difficulties. CONCLUSIONS: It is commendable that such a fragile state, with all sorts of barriers, manages to sustain a slow steady growth of its vaccination coverage. Not reaching the targets set reflects the inappropriateness of those targets rather than a lack of commitment of the health workforce. In the unstable context of countries such as Guinea-Bissau, the predictability of the funds from global health initiatives like the GAVI-Alliance seem to make all the difference in achieving small consistent health gains even in the presence of other major bottlenecks.

What spatial data do we need to develop global mammal conservation strategies?

Spatial data on species distributions are available in two main forms, point locations and distribution maps (polygon ranges and grids). The first are often temporally and spatially biased, and too discontinuous, to be useful (untransformed) in spatial analyses. A variety of modelling approaches are used to transform point locations into maps. We discuss the attributes that point location data and distribution maps must satisfy in order to be useful in conservation planning. We recommend that before point location data are used to produce and/or evaluate distribution models, the dataset should be assessed under a set of criteria, including sample size, age of data, environmental/geographical coverage, independence, accuracy, time relevance and (often forgotten) representation of areas of permanent and natural presence of the species. Distribution maps must satisfy additional attributes if used for conservation analyses and strategies, including minimizing commission and omission errors, credibility of the source/assessors and availability for public screening. We review currently available databases for mammals globally and show that they are highly variable in complying with these attributes. The heterogeneity and weakness of spatial data seriously constrain their utility to global and also sub-global scale conservation analyses.

Forecasting changes in population genetic structure of alpine plants in response to global warming.

Species range shifts in response to climate and land use change are commonly forecasted with species distribution models based on species occurrence or abundance data. Although appealing, these models ignore the genetic structure of species, and the fact that different populations might respond in different ways because of adaptation to their environment. Here, we introduced ancestry distribution models, that is, statistical models of the spatial distribution of ancestry proportions, for forecasting intra-specific changes based on genetic admixture instead of species occurrence data. Using multi-locus genotypes and extensive geographic coverage of distribution data across the European Alps, we applied this approach to 20 alpine plant species considering a global increase in temperature from 0.25 to 4 °C. We forecasted the magnitudes of displacement of contact zones between plant populations potentially adapted to warmer environments and other populations. While a global trend of movement in a north-east direction was predicted, the magnitude of displacement was species-specific. For a temperature increase of 2 °C, contact zones were predicted to move by 92 km on average (minimum of 5 km, maximum of 212 km) and by 188 km for an increase of 4 °C (minimum of 11 km, maximum of 393 km). Intra-specific turnover-measuring the extent of change in global population genetic structure-was generally found to be moderate for 2 °C of temperature warming. For 4 °C of warming, however, the models indicated substantial intra-specific turnover for ten species. These results illustrate that, in spite of unavoidable simplifications, ancestry distribution models open new perspectives to forecast population genetic changes within species and complement more traditional distribution-based approaches.

Global Diversity Lines-A Five-Continent Reference Panel of Sequenced Drosophila melanogaster Strains.

Reference collections of multiple Drosophila lines with accumulating collections of "omics" data have proven especially valuable for the study of population genetics and complex trait genetics. Here we present a description of a resource collection of 84 strains of Drosophila melanogaster whose genome sequences were obtained after 12 generations of full-sib inbreeding. The initial rationale for this resource was to foster development of a systems biology platform for modeling metabolic regulation by the use of natural polymorphisms as perturbations. As reference lines, they are amenable to repeated phenotypic measurements, and already a large collection of metabolic traits have been assayed. Another key feature of these strains is their widespread geographic origin, coming from Beijing, Ithaca, Netherlands, Tasmania, and Zimbabwe. After obtaining 12.5× coverage of paired-end Illumina sequence reads, SNP and indel calls were made with the GATK platform. Thorough quality control was enabled by deep sequencing one line to >100×, and single-nucleotide polymorphisms and indels were validated using ddRAD-sequencing as an orthogonal platform. In addition, a series of preliminary population genetic tests were performed with these single-nucleotide polymorphism data for assessment of data quality. We found 83 segregating inversions among the lines, and as expected these were especially abundant in the African sample. We anticipate that this will make a useful addition to the set of reference D. melanogaster strains, thanks to its geographic structuring and unusually high level of genetic diversity.

Developing markets of energy biomass – local and global perspectives

The thesis explores global and national-level issues related to the development of markets for biomass for energy. The thesis consists of five separate papers and provides insights on selected issues. The aim of Paper I was to identify methodological and statistical challenges in assessing international solid and liquid biofuels trade and provide an overview of the Finnish situation with respect to the status of international solid and liquid biofuels trade. We found that, for the Finnish case, it is possible to qualify direct and indirect trade volumes of biofuels. The study showed that indirect trade of biofuels has a highly significant role in Finland and may be a significant sector also in global biofuels trade. The purpose of Paper II was to provide a quantified insight into Finnish prospects for meeting the national 2020 renewable energy targets and concurrently becoming a largescale producer of forest-biomass-based second-generation biofuels for feeding increasing demand in European markets. We found that Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood-based biofuels. The potential net export of transport biofuels from Finland in 2020 would correspond to 2–3% of European demand. Paper III summarises the global status of international solid and liquid biofuels trade as illuminated by several separate sources. International trade of biofuels was estimated at nearly 1 EJ for 2006. Indirect trade of biofuels through trading of industrial roundwood and material by-products comprises the largest proportion of the trading, with a share of about two thirds. The purpose of Paper IV was to outline a comprehensive picture of the coverage of various certification schemes and sustainability principles relating to the entire value-added chain of biomass and bioenergy. Regardless of the intensive work that has been done in the field of sustainability schemes and principles concerning use of biomass for energy, weaknesses still exist. The objective of Paper V was to clarify the alternative scenarios for the international biomass market until 2020 and identify the underlying steps needed toward a wellfunctioning and sustainable market for biomass for energy purposes. An overall conclusion drawn from this analysis concerns the enormous opportunities related to the utilisation of biomass for energy in the coming decades.

The Global War on Terrorism in the Horn of Africa

Ever since Siad Barre’s regime was toppled in the beginning of the 1990’s Somalia has been without an effective central government. As a result Somalia has remained in an anarchic condition of state collapse for nearly two decades. This anarchy has often been put forward as a potential breeding ground for terrorism. As a response to this threat the United States has undertaken several policies, initiatives, and operations in the Horn of Africa generally and in Somalia specifically. In this descriptive study a twofold analysis has been undertaken. First, conditions in present day Somalia as well as Somali history have been analyzed to evaluate the potential Somalia holds as a terrorist base of operations or a recruiting- or staging area. Second, US strategies and actions have been analyzed to evaluate the adequacy of the US response to the threat Somalia poses in terms of terrorism. Material for the analyses have been derived from anthropological, political, and security studies dealing with Somalia. This material has been augmented by a wide range of news coverage, western and non-western. Certain different US policy documents from different levels have been chosen to represent US strategies for the Global War on Terrorism. Because Somali social institutions, such as the clan system, hold great weight in Somali society, Somalia is a difficult area of operations for terrorist networks. In addition the changing nature of Somali alliances and the tangled webs of conflict that characterize present day Somalia aggravate the difficulties that foreign terrorist networks would encounter in Somalia, would they choose to try to utilize it in any great extent. The US has taken potential terrorism threats in Africa and specifically Somalia very seriously. US actions in Somalia have mainly focused on apprehending or neutralizing terror suspects. Such policies, coupled with backing the Ethiopian invasion of Somalia may have actually turned out increasing Somalia’s terror potential.

Determinantes socio-económicas de la desnutrición global infantil en la Localidad de Ciudad Bolívar (Bogotá, Colombia) en el año 2011

La desnutrición infantil y la pobreza se encuentran asociadas y estas a su vez con el progreso de los países. Conocer las determinantes sociales y económicas de la niñez que padece de bajo peso es necesario para crear escenarios propicios para el adecuado desarrollo de la primera infancia y de esta manera contribuir con la superación de la pobreza en el marco de sistemas sanitarios equitativos. Se realiza una descripción de las características socio-económicas y un análisis de posibles asociaciones entre estas y el bajo peso infantil de una muestra de infantes de uno de los sectores de mayor vulnerabilidad y pobreza de Bogotá (Colombia). La tasa del bajo peso infantil en la muestra del estudio en más alta a la presentada en Bogotá y Colombia (8.5%, 2.9% y 3.4% respectivamente). Al realizar el análisis de las posibles asociaciones entre el bajo peso y las variables de estudio, se evidencia que las relaciones son débiles entre la primera y las segundas, siendo la condición de desplazamiento la que mayor asociación positiva presenta con la deficiencia nutricional seguido del rango de edad entre los 25 y 36 meses. La situación que presenta mayor independencia con respecto al bajo peso infantil es contar con vivienda propia seguida del sexo. La desnutrición infantil se presenta en niveles importantes en sectores de mayor vulnerabilidad con implicaciones para el adecuado desarrollo de los infantes y para las intenciones de reducción de los índices de pobreza en el país. El fortalecimiento de las políticas públicas que favorezca el desarrollo infantil, la superación de la pobreza y las inequidades en los sistemas de salud deben contemplar acciones integrales dirigidas a los más vulnerables, con la participación de la sociedad civil y los sectores públicos y privados, el compromiso político y económico de los gobiernos y reglas claras que contribuyan a la solución estructural de la pobreza y que promueva el adecuado desarrollo infantil.