A forensic investigation of single human hair fibres using FTIR-ATR spectroscopy and chemometrics

Human hair fibres are ubiquitous in nature and are found frequently at crime scenes often as a result of exchange between the perpetrator, victim and/or the surroundings according to Locard's Principle. Therefore, hair fibre evidence can provide important information for crime investigation. For human hair evidence, the current forensic methods of analysis rely on comparisons of either hair morphology by microscopic examination or nuclear and mitochondrial DNA analyses. Unfortunately in some instances the utilisation of microscopy and DNA analyses are difficult and often not feasible. This dissertation is arguably the first comprehensive investigation aimed to compare, classify and identify the single human scalp hair fibres with the aid of FTIR-ATR spectroscopy in a forensic context. Spectra were collected from the hair of 66 subjects of Asian, Caucasian and African (i.e. African-type). The fibres ranged from untreated to variously mildly and heavily cosmetically treated hairs. The collected spectra reflected the physical and chemical nature of a hair from the near-surface particularly, the cuticle layer. In total, 550 spectra were acquired and processed to construct a relatively large database. To assist with the interpretation of the complex spectra from various types of human hair, Derivative Spectroscopy and Chemometric methods such as Principal Component Analysis (PCA), Fuzzy Clustering (FC) and Multi-Criteria Decision Making (MCDM) program; Preference Ranking Organisation Method for Enrichment Evaluation (PROMETHEE) and Geometrical Analysis for Interactive Aid (GAIA); were utilised. FTIR-ATR spectroscopy had two important advantages over to previous methods: (i) sample throughput and spectral collection were significantly improved (no physical flattening or microscope manipulations), and (ii) given the recent advances in FTIR-ATR instrument portability, there is real potential to transfer this work.s findings seamlessly to on-field applications. The "raw" spectra, spectral subtractions and second derivative spectra were compared to demonstrate the subtle differences in human hair. SEM images were used as corroborative evidence to demonstrate the surface topography of hair. It indicated that the condition of the cuticle surface could be of three types: untreated, mildly treated and treated hair. Extensive studies of potential spectral band regions responsible for matching and discrimination of various types of hair samples suggested the 1690-1500 cm^-1 IR spectral region was to be preferred in comparison with the commonly used 1750-800 cm^-1. The principal reason was the presence of the highly variable spectral profiles of cystine oxidation products (1200-1000 cm^-1), which contributed significantly to spectral scatter and hence, poor hair sample matching. In the preferred 1690-1500 cm^-1 region, conformational changes in the keratin protein attributed to the α-helical to β-sheet transitions in the Amide I and Amide II vibrations and played a significant role in matching and discrimination of the spectra and hence, the hair fibre samples. For gender comparison, the Amide II band is significant for differentiation. The results illustrated that the male hair spectra exhibit a more intense β-sheet vibration in the Amide II band at approximately 1511 cm^-1 whilst the female hair spectra displayed more intense α-helical vibration at 1520-1515cm^-1. In terms of chemical composition, female hair spectra exhibit greater intensity of the amino acid tryptophan (1554 cm^-1), aspartic and glutamic acid (1577 cm^-1). It was also observed that for the separation of samples based on racial differences, untreated Caucasian hair was discriminated from Asian hair as a result of having higher levels of the amino acid cystine and cysteic acid. However, when mildly or chemically treated, Asian and Caucasian hair fibres are similar, whereas African-type hair fibres are different. In terms of the investigation's novel contribution to the field of forensic science, it has allowed for the development of a novel, multifaceted, methodical protocol where previously none had existed. The protocol is a systematic method to rapidly investigate unknown or questioned single human hair FTIR-ATR spectra from different genders and racial origin, including fibres of different cosmetic treatments. Unknown or questioned spectra are first separated on the basis of chemical treatment i.e. untreated, mildly treated or chemically treated, genders, and racial origin i.e. Asian, Caucasian and African-type. The methodology has the potential to complement the current forensic analysis methods of fibre evidence (i.e. Microscopy and DNA), providing information on the morphological, genetic and structural levels.

On approximately universal schemes for two-hop networks

Full-duplex and half-duplex two-hop networks are considered. Explicit coding schemes which are approximately universal over a class of fading distributions are identified, for the case when the network has either one or two relays.

Bayesian framework and message passing for joint support and signal recovery of approximately sparse signals

In this paper, we develop a low-complexity message passing algorithm for joint support and signal recovery of approximately sparse signals. The problem of recovery of strictly sparse signals from noisy measurements can be viewed as a problem of recovery of approximately sparse signals from noiseless measurements, making the approach applicable to strictly sparse signal recovery from noisy measurements. The support recovery embedded in the approach makes it suitable for recovery of signals with same sparsity profiles, as in the problem of multiple measurement vectors (MMV). Simulation results show that the proposed algorithm, termed as JSSR-MP (joint support and signal recovery via message passing) algorithm, achieves performance comparable to that of sparse Bayesian learning (M-SBL) algorithm in the literature, at one order less complexity compared to the M-SBL algorithm.

An approximately H-1-optimal Petrov-Galerkin meshfree method: application to computation of scattered light for optical tomography

Nearly pollution-free solutions of the Helmholtz equation for k-values corresponding to visible light are demonstrated and verified through experimentally measured forward scattered intensity from an optical fiber. Numerically accurate solutions are, in particular, obtained through a novel reformulation of the H-1 optimal Petrov-Galerkin weak form of the Helmholtz equation. Specifically, within a globally smooth polynomial reproducing framework, the compact and smooth test functions are so designed that their normal derivatives are zero everywhere on the local boundaries of their compact supports. This circumvents the need for a priori knowledge of the true solution on the support boundary and relieves the weak form of any jump boundary terms. For numerical demonstration of the above formulation, we used a multimode optical fiber in an index matching liquid as the object. The scattered intensity and its normal derivative are computed from the scattered field obtained by solving the Helmholtz equation, using the new formulation and the conventional finite element method. By comparing the results with the experimentally measured scattered intensity, the stability of the solution through the new formulation is demonstrated and its closeness to the experimental measurements verified.

Joint Approximately Sparse Channel Estimation and Data Detection in OFDM Systems Using Sparse Bayesian Learning

It is well known that the impulse response of a wide-band wireless channel is approximately sparse, in the sense that it has a small number of significant components relative to the channel delay spread. In this paper, we consider the estimation of the unknown channel coefficients and its support in OFDM systems using a sparse Bayesian learning (SBL) framework for exact inference. In a quasi-static, block-fading scenario, we employ the SBL algorithm for channel estimation and propose a joint SBL (J-SBL) and a low-complexity recursive J-SBL algorithm for joint channel estimation and data detection. In a time-varying scenario, we use a first-order autoregressive model for the wireless channel and propose a novel, recursive, low-complexity Kalman filtering-based SBL (KSBL) algorithm for channel estimation. We generalize the KSBL algorithm to obtain the recursive joint KSBL algorithm that performs joint channel estimation and data detection. Our algorithms can efficiently recover a group of approximately sparse vectors even when the measurement matrix is partially unknown due to the presence of unknown data symbols. Moreover, the algorithms can fully exploit the correlation structure in the multiple measurements. Monte Carlo simulations illustrate the efficacy of the proposed techniques in terms of the mean-square error and bit error rate performance.

Nanostructuring of p- and n-type skutterudites reaching figures of merit of approximately 1.3 and 1.6, respectively

Thermoelectric (TE) conversion of waste heat into useful electricity demands optimized thermal and electrical transport in the leg material over a wide temperature range. In order to gain a reasonably high figure of merit (ZT) as well as high thermal electric conversion efficiency, various conditions of the starting material were studied: industrially produced skutterudite powders of p-type DDy(Fe1-xCox)(4)Sb-12 (DD: didymium) and n-type (Mm, Sm)(y)Co4Sb12 (Mm: mischmetal) were used. After a rather fast reaction-melting technique, the bulk was crushed and sieved with various strainers in order to obtain particles below the respective mesh sizes, followed by ball-milling under three different conditions. The dependence of the TE properties (after hot pressing) on the micro/nanosized particles, grains and crystallites was investigated. Optimized conditions resulted in an increase of ZT for bulk material to current record-high values: from ZT similar to 1.1 to ZT similar to 1.3 at 775 K for p-type and from ZT similar to 1.0 to ZT similar to 1.6 at 800 K for n-type, resulting in respective efficiencies (300-850 K) of eta > 13% and eta similar to 16%. (C) 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Una aproximación al concepto de “razón de estado” en Giovanni Botero desde la teoría política de Carl Schmitt

Resumen: El trabajo se propone analizar la conceptualización del término “razón de Estado” en el teólogo piamontés Giovanni Botero a la luz de las teorías políticas de Carl Schmitt. En especial se hará hincapié en la aparición dentro del pensamiento de Botero de conceptos que luego Schmitt caracterizará como esenciales en la conformación del Estado Moderno, entre los cuales están el de soberanía, la idea del enemigo político, y la conformación de un orden frente a la existencia de un estado de excepción. Principalmente se busca usar estos conceptos schmittianos como marco teórico para entender cómo Botero intentó definir el concepto de “razón de Estado” frente a las problemáticas políticas, sociales y religiosas que se producían a fines del siglo XVI.

El origen de la comunidad política en Giovanni Botero. Influencias medievales y prefiguración de conceptos modernos

Resumen: El presente trabajo busca analizar las ideas sobre el origen de la comunidad política en el teólogo católico piamontés del siglo XVI, Giovanni Botero. El propósito, en primer lugar, es intentar delinear cuáles pudieron haber sido las influencias de la Antigüedad clásica y de la Cristiandad medieval en este pensador, tratando de vislumbrar la conexión con las tendencias aristotélico-tomistas, por un lado y las latino-ciceronianas, por otro. Y en segundo término, asimismo se buscará dilucidar cómo, a partir de estas ideas, comienzan a aparecer en este pensador católico algunas referencias que demuestran, sino un quiebre, por lo menos una cierta variación en el pensamiento político, variación que puede compararse con los cuidados necesarios, con las clásicas teorías políticas modernas. El objetivo final se enmarca en proveer un primer acercamiento a una temática compleja que en estudios posteriores puede enfocarse desde perspectivas distintas a las clásicamente estudiadas: la temática del “tránsito” entre las ideas políticas medievales y modernas.

On drift and diel vertical migration of bottom invertebrates of the Amur. [Translation from: Zoologicheskie Zhurnal 42 1601-1612, 1963.]

Planktobenthos was sampled in 1957-58 in the river Amur. A determination of the kind of organisms drifting in the mass of water of the Amur was carried out. Of special interest for the authors was the activity of drifting of benthic larvae.

Approximately Uniform Random Sampling in Sensor Networks

Recent work in sensor databases has focused extensively on distributed query problems, notably distributed computation of aggregates. Existing methods for computing aggregates broadcast queries to all sensors and use in-network aggregation of responses to minimize messaging costs. In this work, we focus on uniform random sampling across nodes, which can serve both as an alternative building block for aggregation and as an integral component of many other useful randomized algorithms. Prior to our work, the best existing proposals for uniform random sampling of sensors involve contacting all nodes in the network. We propose a practical method which is only approximately uniform, but contacts a number of sensors proportional to the diameter of the network instead of its size. The approximation achieved is tunably close to exact uniform sampling, and only relies on well-known existing primitives, namely geographic routing, distributed computation of Voronoi regions and von Neumann's rejection method. Ultimately, our sampling algorithm has the same worst-case asymptotic cost as routing a point-to-point message, and thus it is asymptotically optimal among request/reply-based sampling methods. We provide experimental results demonstrating the effectiveness of our algorithm on both synthetic and real sensor topologies.

Natural hybridization between genera that diverged from each other approximately 60 million years ago.

A fern from the French Pyrenees-×Cystocarpium roskamianum-is a recently formed intergeneric hybrid between parental lineages that diverged from each other approximately 60 million years ago (mya; 95% highest posterior density: 40.2-76.2 mya). This is an extraordinarily deep hybridization event, roughly akin to an elephant hybridizing with a manatee or a human with a lemur. In the context of other reported deep hybrids, this finding suggests that populations of ferns, and other plants with abiotically mediated fertilization, may evolve reproductive incompatibilities more slowly, perhaps because they lack many of the premating isolation mechanisms that characterize most other groups of organisms. This conclusion implies that major features of Earth's biodiversity-such as the relatively small number of species of ferns compared to those of angiosperms-may be, in part, an indirect by-product of this slower "speciation clock" rather than a direct consequence of adaptive innovations by the more diverse lineages.

Giovanni Battista Montano as Architectural Draughtsman: Recording the Past and Designing the Future

Giovanni Battista Montano (1534-1621), who was born in Milan and trained as a woodcarver, relocated permanently to Rome in the early 1570s where his interest in sculpting was replaced by intense study of the city’s antique monuments and ruins. Although Montano carried out several sculptural and architectural projects during his time in Rome, it is his surviving corpus of drawings that testifies to his passion of exploring ancient architecture through the medium of drawing. While Montano was not famous during his lifetime, a large body of his intriguing designs became celebrated and widely circulated after his death thanks to the 1624 publication of Montano’s designs by his loyal pupil, Giovanni Battista Soria. Montano’s lifelong work differs from virtually all of his predecessors and contemporaries in its “fantastical” and ornamental nature. This thesis explores Montano’s artistic training as it relates to his later interest in imaginatively reconstructing antique buildings, along with his disregard for archaeological or historical accuracy. The subject matter upon which Montano focused is discussed, along with his objective in creating a large corpus of half-historical, half-invented drawings. His drawing techniques are explored with specific reference to the largest group of extant Montano drawings, today housed in Sir John Soane’s Museum, London, England, and also in reference to three original Montano drawings in the Centre Canadien d’Architecture/Canadian Centre for Architecture, Montréal. Also explored is the legacy and impact of Montano’s drawings and the later publications of his designs on the works of Roman Baroque architects, specifically Borromini and Bernini. This thesis ultimately attempts to understand the impact of the intellectual and artistic environment surrounding Montano in late sixteenth and early seventeenth century Rome, his drawing techniques, his choice of subject matter, and the reception that his unique works received from contemporary artists and intellectuals, along with those of the following generation.