Mise en comparaison de deux méthodes d'évaluation environnementale territoriale pour en évaluer les forces, faiblesses et les complémentarités : l'analyse de flux de matières Eurostat et l'analyse de cycle de vie territoriale

La réalisation de l’évaluation environnementale, en France, est encouragée par l’existence de règlements, lois, directives et normes Européennes (notamment la Directive 2001/42/CE du Parlement européen et du Conseil du 27 juin 2001 relative à l'évaluation des incidences de certains plans et programmes sur l'environnement et la Loi n° 2015-992 du 17 août 2015 relative à la transition énergétique pour la croissance verte). La compréhension du cadre Drivers – Pressures – State – Impacts – Responses permet de replacer les différentes méthodologies dans un cadre conceptuel plus large. Les méthodes d’analyse de flux de matières (Pressures) et d’analyse de cycle de vie (Impacts) sont les deux familles d’évaluation environnementale considérées dans ce travail. C’est plus précisément l’analyse de flux de matières selon Eurostat et l’analyse de cycle de vie territoriale qui ont été appliquées au territoire métropolitain d’Aix-Marseille-Provence. Un état de l’art relevant les études dans lesquelles sont réalisées des analyses de flux de matières a pu montrer que cette famille de méthodes informe sur le métabolisme des territoires à partir de différents types de flux. L’importance des flux indirects et des ressources minérales dans les métabolismes a ainsi été démontrée. Du côté des études analysant les cycles de vie sur les territoires, comme c’est le cas dans l’analyse de cycle de vie territoriale, la distinction faite entre les impacts et dommages, directs ou globaux, permet d’offrir des recommandations ciblées, améliorant la qualité de vie des citoyens. La mise en œuvre de ces deux méthodes sur le territoire métropolitain a mis en évidence l’importance dominante des flux indirects liés aux importations et exportations que génèrent les activités du territoire, elles-mêmes fortement influencées par la présence du port de Marseille-Fos. L’activité pétrochimique, qui caractérise elle aussi la métropole, est une grande consommatrice de combustibles fossiles, ce qui se reflète dans les volumes de flux calculés et leurs impacts associés. Les deux méthodologies s’avèrent complémentaires, chacune ayant ses forces et faiblesses respectives. Pour l’analyse de cycle de vie, la pensée cycle de vie et la prise en compte de la qualité de la matière, d’une part, et la facilité d’application et la marge d’erreur réduite de l’analyse de flux de matières, d’autre part, en plus de leurs résultats complémentaires, justifient un usage hybride pour la prise d’actions ciblées. En effet, la collecte commune des données rend intéressante leur exploitation et l’interprétation croisée de leurs résultats.

Innovation in construction : a case study of the Australian context

The dominant economic paradigm currently guiding industry policy making in Australia and much of the rest of the world is the neoclassical approach. Although neoclassical theories acknowledge that growth is driven by innovation, such innovation is exogenous to their standard models and hence often not explored. Instead the focus is on the allocation of scarce resources, where innovation is perceived as an external shock to the system. Indeed, analysis of innovation is largely undertaken by other disciplines, such as evolutionary economics and institutional economics. As more has become known about innovation processes, linear models, based on research and development or market demand, have been replaced by more complex interactive models which emphasise the existence of feedback loops between the actors and activities involved in the commercialisation of ideas (Manley 2003). Currently dominant among these approaches is the national or sectoral innovation system model (Breschi and Malerba 2000; Nelson 1993), which is based on the notion of increasingly open innovation systems (Chesbrough, Vanhaverbeke, and West 2008). This chapter reports on the ‘BRITE Survey’ funded by the Cooperative Research Centre for Construction Innovation which investigated the open sectoral innovation system operating in the Australian construction industry. The BRITE Survey was undertaken in 2004 and it is the largest construction innovation survey ever conducted in Australia. The results reported here give an indication of how construction innovation processes operate, as an example that should be of interest to international audiences interested in construction economics. The questionnaire was based on a broad range of indicators recommended in the OECD’s Community Innovation Survey guidelines (OECD/Eurostat 2005). Although the ABS has recently begun to undertake regular innovation surveys that include the construction industry (2006), they employ a very narrow definition of the industry and only collect very basic data compared to that provided by the BRITE Survey, which is presented in this chapter. The term ‘innovation’ is defined here as a new or significantly improved technology or organisational practice, based broadly on OECD definitions (OECD/Eurostat 2005). Innovation may be technological or organisational in nature and it may be new to the world, or just new to the industry or the business concerned. The definition thus includes the simple adoption of existing technological and organisational advancements. The survey collected information about respondents’ perceptions of innovation determinants in the industry, comprising various aspects of business strategy and business environment. It builds on a pilot innovation survey undertaken by PricewaterhouseCoopers (PWC) for the Australian Construction Industry Forum on behalf of the Australian Commonwealth Department of Industry Tourism and Resources, in 2001 (PWC 2002). The survey responds to an identified need within the Australian construction industry to have accurate and timely innovation data upon which to base effective management strategies and public policies (Focus Group 2004).

El entorno español para la creación de nuevas empresas de base tecnológica: La actividad de I+D+I en España. Una comparación internacional

La creación de empresas de base tecnológica en un determinado país o región requiere que se cumplan una serie de requisitos previos: inversión en I+D, capital-riesgo, una cultura emprendedora, programas específicos de apoyo a la creación de este tipo de empresas, un marco regulatorio-institucional favorable y un sistema social en red en el que las empresas compitan entre sí, pero al mismo tiempo aprendan unas de otras. En este trabajo se pretende evaluar la posición española en la actividad de I+D+I comparándola con el promedio de la Unión Europea, con algún país europeo significativo y con Estados Unidos, como país de referencia en este campo. Para ello, las principales fuentes de datos utilizadas son el Eurostat, la OCDE, la Comisión Europea, el INE, el Banco de España y la Oficina Española de Patentes y Marcas.

Relaciones comerciales entre China y la Unión Europea

La economía china ha experimentado en las últimas tres décadas una profunda transformación, hasta convertirse en el momento actual en el centro de la actividad manufacturera a escala mundial. Tal evolución no ha sido ajena a la metamorfosis sufrida por la sociedad china, tras un convulso siglo XX bajo los mandatos en la segunda mitad del mismo de Mao Tse Tung y Deng Xiaoping. La Unión Europea (UE) ha tratado de estrechar los lazos mercantiles con el gigante chino, fundamentalmente a través de la firma de acuerdos comerciales, aunque obstaculizados por algunos conflictos que han surgido en los últimos años. El análisis de las relaciones bilaterales entre China y la UE refleja una progresiva intensidad del comercio entre ambas regiones y la tendencia hacia la profundización del saldo negativo para la UE, hecho que ha generado tensiones diplomáticas. En un entorno más conflictivo recientemente en las relaciones bilaterales, la UE debería así mismo introducir reformas para mejorar su competitividad exterior y optimizar el vínculo comercial con China.

La diversidad de los modelos de participación laboral de las mujeres en la UE-27

[ESP] El objetivo de este artículo es relacionar las características de la inserción laboral femenina con su grado de participación en el mercado laboral en los países de la Unión Europea a través de los datos proporcionados por Eurostat. Nos interesa conocer si una mayor participación laboral entre las mujeres va aparejada con un modelo laboral “femenino”, esto es, con empleos a tiempo parcial, temporales, de baja remuneración y en determinados sectores y ocupaciones. O si por el contrario, en los países en los cuales la tasa de empleo femenina es elevada y hay menor brecha con respecto a la de los hombres, el modelo de inserción laboral de mujeres y hombres es similar. La diversidad de los mercados de trabajo y también de las políticas públicas y de las estructuras productivas en un área tan amplia como al UE27, nos impide establecer modelos de inserción laboral femenina claros, aunque sí hemos podido apuntar rasgos comunes con respecto a las desigualdades de género entre países.

Cultural policy models and cultural facilities models: from national to local models. Analysis of Barcelona’s case

The development of cultural policy analysis by social science has been produced a theorization about cultural policy models from sociology and political science. This analysis shows the influence of the national model of cultural policy on the forms of governance and management of cultural facilities. However, in this paper we will defend that currently the local model of cultural policy decisively influences the model of cultural institutions. This is explained by the growing importance of culture in local development strategies. In order to demonstrate this we will analyze the case of the Barcelona Model of local development and cultural policy, that is characterized for the level of local government leadership, multilevel governance, the use of culture in urban planning processes and a tendency to use public-private partnership in public management. This Model influences the genesis and development of the cultural facilities and it produces a singular and relatively successful model.

Cultural assets and sustainable development: the economic significance of Cultural Heritage

This article assesses the condition of the Cultural Heritage as a form of capital that gives rise to a significant flow of economic returns widely outweighing the effort it takes to preserve it. More specifically, the data related to Spain is provided from the perspective of aggregate demand drawing up an estimation of both the direct and indirect economic impacts arising from the Cultural Heritage valuation. The results highlight again the relevance of cultural tourism in the delivery of these economic returns and as a catalyst of activities leading to the sustainable socioeconomic devel-opment of multiple territories.

Dynamic analysis of employment trajectories through the concept of fl exicurity

The paper presents a dynamic study of the Spanish labour market which tries to determine if it matches the characteristics of transitional labour markets from a fl exicurity approach. Employment trajectories of Spanish workers during the years 2007-2010 are studied using the Continuous Sample of Working Lives. This period covers the end of the expansion of the Spanish economy and the beginning of the current employment crisis. From the combination of the chosen topic, the approach, and the database used, this is a novel perspective in our country. The article shows evidence of the evolution of the employment and unemployment spells, the Spanish labour market turnover degree, and the diffi culties of some groups for carrying out transition between employment and unemployment. The results obtained show a labour market in which a) transitions have come to a halt, and b) there is high job insecurity.

Determining factors of the innovative behavior of cooperatives: an analysis of the case of Castilla y León

Cooperatives have a long historical experience in the Spanish economy and have demonstrated their ability to compete against traditional firms in the market. To maintain this capability, while taking advantage of the competitive advantages associated with their idiosyncrasies as social economy enterprises, they should take into consideration that the economy is increasingly globalized and increasingly knowledge-based, especially with regards to technological content. As a consequence, the innovative capacity appears to be a key aspect in order to be able to challenge competitors. This article characterizes the innovative behavior of cooperatives in the region of Castile and Leon and analyses the internal and external factors affecting their innovative performance, based on data from a survey of 581 cooperatives. The results of the empirical analysis, which is performed by multivariate binary logistic regression on various types of innovation, lead us to identify the size of the organizations, the existence of planning, the R & D activities and the human capital as the main determining factors.

Improving E-Assessment Systems With A focus On Adaptive Feedback And Marking

Institutions involved in the provision of tertiary education across Europe are feeling the pinch. European universities, and other higher education (HE) institutions, must operate in a climate where the pressure of government spending cuts (Garben, 2012) is in stark juxtaposition to the EU’s strategy to drive forward and maintain a growth of student numbers in the sector (eurostat, 2015).

In order to remain competitive, universities and HE institutions are making ever-greater use of electronic assessment (E-Assessment) systems (Chatzigavriil et all, 2015; Ferrell, 2012). These systems are attractive primarily because they offer a cost-effect and scalable approach for assessment. In addition to scalability, they also offer reliability, consistency and impartiality; furthermore, from the perspective of a student they are most popular because they can offer instant feedback (Walet, 2012).

There are disadvantages, though.

First, feedback is often returned to a student immediately on competition of their assessment. While it is possible to disable the instant feedback option (this is often the case during an end of semester exam period when assessment scores must be can be ratified before release), however, this option tends to be a global ‘all on’ or ‘all off’ configuration option which is controlled centrally rather than configurable on a per-assessment basis.

If a formative in-term assessment is to be taken by multiple groups of
students, each at different times, this restriction means that answers to each question will be disclosed to the first group of students undertaking the assessment. As soon as the answers are released “into the wild” the academic integrity of the assessment is lost for subsequent student groups.

Second, the style of feedback provided to a student for each question is often limited to a simple ‘correct’ or ‘incorrect’ indicator. While this type of feedback has its place, it often does not provide a student with enough insight to improve their understanding of a topic that they did not answer correctly.

Most E-Assessment systems boast a wide range of question types including Multiple Choice, Multiple Response, Free Text Entry/Text Matching and Numerical questions. The design of these types of questions is often quite restrictive and formulaic, which has a knock-on effect on the quality of feedback that can be provided in each case.

Multiple Choice Questions (MCQs) are most prevalent as they are the most prescriptive and therefore most the straightforward to mark consistently. They are also the most amenable question types, which allow easy provision of meaningful, relevant feedback to each possible outcome chosen.
Text matching questions tend to be more problematic due to their free text entry nature. Common misspellings or case-sensitivity errors can often be accounted for by the software but they are by no means fool proof, as it is very difficult to predict in advance the range of possible variations on an answer that would be considered worthy of marks by a manual marker of a paper based equivalent of the same question.

Numerical questions are similarly restricted. An answer can be checked for accuracy or whether it is within a certain range of the correct answer, but unless it is a special purpose-built mathematical E-Assessment system the system is unlikely to have computational capability and so cannot, for example, account for “method marks” which are commonly awarded in paper-based marking.

From a pedagogical perspective, the importance of providing useful formative feedback to students at a point in their learning when they can benefit from the feedback and put it to use must not be understated (Grieve et all, 2015; Ferrell, 2012).

In this work, we propose a number of software-based solutions, which will overcome the limitations and inflexibilities of existing E-Assessment systems.