Public Governance, Health and Foreign Direct Investment in Sub-Saharan Africa

In this paper we diverge from the existing empirical literature on FDI determinants in two ways. First, we decompose the sources of the foreign direct investment (FDI) gap between Sub-Saharan Africa (SSA) and other developing regions. Once market size has been accounted for, we nd that SSA's FDI de cit is mostly explained by insufficient provision of public goods: low human capital accumulation, especially health, in SSA explains 100-140% of the inter-regional FDI gaps. Second, we estimate the indirect effect of infectious diseases on FDI through their direct impact on health. We find that a 1% point rise in HIV prevalence in the adult population is associated with a decrease in net FDI inflows of 3.5%, while a country in which 100% of the population is at risk of contracting deadly malaria receives about 16% less FDI than a similar country located in a malaria-free region.

Climbing to the top? Foreign Direct Investment and Property Rights.

This paper operates at the interface of the literature on the impact of foreign direct investment (FDI) on host countries, and the literature on the determinants of institutional quality. We argue that FDI contributes to economic development by improving institutional quality in the host country and we attempt to test this proposition using a large panel data set of 70 developing countries during the period 1981 and 2005, and we show that FDI inflows have a positive and highly significant impact on property rights. The result appears to be very robust and is and not affected by model specification, different control variables, or a particular estimation technique. As far as we are aware this is the first paper to empirically test the FDI – property rights linkage.

Short-Run Strategies For Attracting Foreign Direct Investment

This paper empirically investigates the effectiveness and feasibility of two FDI policies, fiscal incentives and deregulation, aimed at improving the attractiveness of a country in the short run. Using disaggregated data on sales by US MNEs’ foreign affiliates in 43 developed and developing countries over the 1982-1994 period, results show that the provision of fiscal incentives or the deregulation of the labour market would exert a positive impact on total FDI. Given the drawbacks frequently associated with the use of incentive packages, economy-wide policies which ease firing procedures and reduce severance payments would certainly be the best policy option. This paper also highlights the different aggregation and omitted variable biases that have affected results of previous studies and provides some support to recent theoretical models of FDI by showing that third country effects and spatial interdependence influence respectively the location of export-platform FDI and vertical FDI.

Short-Run Strategies For Attracting Foreign Direct Investment

This paper empirically investigates the effectiveness and feasibility of two FDI policies, fiscal incentives and deregulation, aimed at improving the attractiveness of a country in the short run. Using disaggregated data on sales by US MNEs’ foreign affiliates in 43 developed and developing countries over the 1982-1994 period, results show that the provision of fiscal incentives or the deregulation of the labour market would exert a positive impact on total FDI. Given the drawbacks frequently associated with the use of incentive packages, economy-wide policies which ease firing procedures and reduce severance payments would certainly be the best policy option. This paper also highlights the different aggregation and omitted variable biases that have affected results of previous studies and provides some support to recent theoretical models of FDI by showing that third country effects and spatial interdependence influence respectively the location of export-platform FDI and vertical FDI.

Multiscale determinants of tree frog (Hyla arborea L.) calling ponds in western Switzerland

A tree frog (Hyla arborea L., 1758) metapopulation in western Switzerland was studied during spring 2001. All potential calling ponds in an area of 350 km(2) were searched for tree frog calling males. Twenty-nine out of 111 ponds sheltered between 1 and 250 callers. Most ponds were occupied by less than 12 males. Pond parameters were measured at three different levels using field analysis and a Geographical Information System (GIS). The first level was water chemistry and pond-associated measures. The second level was the surrounding land use in a 30 m buffer around the pond. The third level consisted of landscape indices on a broader scale (up to 2 km). Logistic regression was applied to identify parameters that can predict the presence of calling males in a pond. Response variable was the presence or absence of callers. Four significant parameters allowed us to explain about 40% of the total deviance of the observed occupational pattern. Urbanization around the pond had a highly negative impact on the probability of presence of calling males. Hours of direct sunlight on the pond was positively correlated with callers. Higher water conductivity was associated with a lesser probability of species presence. Finally, the further the closest two-lane road, the higher the probability of callers presence. Our results show that presence or absence of callers is influenced by factors acting at various geographical scales.

Maintenance of ancestral sex chromosomes in Palearctic tree frogs: direct evidence from Hyla orientalis.

Contrasting with the situation found in birds and mammals, sex chromosomes are generally homomorphic in poikilothermic vertebrates. This homomorphy was recently shown to result from occasional X-Y recombinations (not from turnovers) in several European species of tree frogs (Hyla arborea, H. intermedia and H. molleri). Because of recombination, however, alleles at sex-linked loci were rarely diagnostic at the population level; support for sex linkage had to rely on multilocus associations, combined with occasional sex differences in allelic frequencies. Here, we use direct evidence, obtained from anatomical and histological analyses of offspring with known pedigrees, to show that the Eastern tree frog (H. orientalis) shares the same pair of sex chromosomes, with identical patterns of male heterogamety and complete absence of X-Y recombination in males. Conservation of an ancestral pair of sex chromosomes, regularly rejuvenated via occasional X-Y recombination, seems thus a widespread pattern among Hyla species. Sibship analyses also identified discrepancies between genotypic and phenotypic sex among offspring, associated with abnormal gonadal development, suggesting a role for sexually antagonistic genes on the sex chromosomes.

The Th2 lymphoproliferation developing in LatY136F mutant mice triggers polyclonal B cell activation and systemic autoimmunity.

Lat(Y136F) knock-in mice harbor a point mutation in Tyr(136) of the linker for activation of T cells and show accumulation of Th2 effector cells and IgG1 and IgE hypergammaglobulinemia. B cell activation is not a direct effect of the mutation on B cells since in the absence of T cells, mutant B cells do not show an activated phenotype. After adoptive transfer of linker for activation of T cell mutant T cells into wild-type, T cell-deficient recipients, recipient B cells become activated. We show in vivo and in vitro that the Lat(Y136F) mutation promotes T cell-dependent B cell activation leading to germinal center, memory, and plasma cell formation even in an MHC class II-independent manner. All the plasma and memory B cell populations found in physiological T cell-dependent B cell responses are found. Characterization of the abundant plasmablasts found in secondary lymphoid organs of Lat(Y136F) mice revealed the presence of a previously uncharacterized CD93-expressing subpopulation, whose presence was confirmed in wild-type mice after immunization. In Lat(Y136F) mice, B cell activation was polyclonal and not Ag-driven because the increase in serum IgG1 and IgE concentrations involved Abs and autoantibodies with different specificities equally. Although the noncomplement-fixing IgG1 and IgE are the only isotypes significantly increased in Lat(Y136F) serum, we observed early-onset systemic autoimmunity with nephritis showing IgE autoantibody deposits and severe proteinuria. These results show that Th2 cells developing in Lat(Y136F) mice can trigger polyclonal B cell activation and thereby lead to systemic autoimmune disease.

JARID2 is a direct target of the PAX3-FOXO1 fusion protein and inhibits myogenic differentiation of rhabdomyosarcoma cells.

Rhabdomyosarcomas (RMS) are the most frequent soft-tissue sarcoma in children and characteristically show features of developing skeletal muscle. The alveolar subtype is frequently associated with a PAX3-FOXO1 fusion protein that is known to contribute to the undifferentiated myogenic phenotype of RMS cells. Histone methylation of lysine residues controls developmental processes in both normal and malignant cell contexts. Here we show that JARID2, which encodes a protein known to recruit various complexes with histone-methylating activity to their target genes, is significantly overexpressed in RMS with PAX3-FOXO1 compared with the fusion gene-negative RMS (t-test; P < 0.0001). Multivariate analyses showed that higher JARID2 levels are also associated with metastases at diagnosis, independent of fusion gene status and RMS subtype (n = 120; P = 0.039). JARID2 levels were altered by silencing or overexpressing PAX3-FOXO1 in RMS cell lines with and without the fusion gene, respectively. Consistent with this, we demonstrated that JARID2 is a direct transcriptional target of the PAX3-FOXO1 fusion protein. Silencing JARID2 resulted in reduced cell proliferation coupled with myogenic differentiation, including increased expression of Myogenin (MYOG) and Myosin Light Chain (MYL1) in RMS cell lines representative of both the alveolar and embryonal subtypes. Induced myogenic differentiation was associated with a decrease in JARID2 levels and this phenotype could be rescued by overexpressing JARID2. Furthermore, we that showed JARID2 binds to and alters the methylation status of histone H3 lysine 27 in the promoter regions of MYOG and MYL1 and that the interaction of JARID2 at these promoters is dependent on EED, a core component of the polycomb repressive complex 2 (PRC2). Therefore, JARID2 is a downstream effector of PAX3-FOXO1 that maintains an undifferentiated myogenic phenotype that is characteristic of RMS. JARID2 and other components of PRC2 may represent novel therapeutic targets for treating RMS patients.

Developing an Effective Construction Training Program for Hispanic and American Supervisors and Craft Workers, 2007

Hispanics are a large and growing part of the United States workforce. Projections of the U.S. Census Bureau (2001) state that, by the year 2050, Hispanics will account for 25% of the population. For the Midwest in particular, the Hispanic population is expected to increase 35% by the year 2025. The construction industry is expected to experience a greater percentage increase of its Hispanic population, due to the labor-intensive nature of the industry. This study addresses the expected increase of Hispanic workers in the construction industry by testing the best approaches for delivering training to construction crews with Hispanic workers as well as American supervisors and laborers in the state of Iowa. The research methodology consisted of assessing the effects on communication, safety, work environment, and productivity as a result of the integration training. Results show that integration on-site training decreases workers’ desire to move and increases quality of work and productivity. Most importantly, experimental design was used to show the increasing levels of direct construction communication due to the Toolbox Integration Course for Hispanic Workers and American Supervisors (TICHA) designed as part of this project. This study recommends the creation of a quasi-governmental or association program that can offer continuous research and training that can benefit the construction industry as well as society as a whole. The industry involvement in this process is crucial for contractors. Not only do contractors benefit from reduced insurance premiums when workers act safely, but workers with better communication skills are more productive.

Glucocorticoids exert direct toxicity on microvasculature: analysis of cell death mechanisms.

Glucocorticoids (GCs) are routinely administered systemically or injected into the eye when treating numerous ocular diseases; however, their toxicity on the retinal microvasculature has not been previously investigated. In this article, the effects of hydrocortisone (Hydro), dexamethasone, dexamethasone-phosphate and triamcinolone acetonide (TA) were evaluated in vitro on human skin microcirculation cells and, bovine endothelial retinal cells, ex-vivo, on flat mounted rat retinas. The degree of GCs induced endothelial cell death varied according to the endothelial cell type and GCs chemical properties. GCs toxicity was higher in skin microvascular endothelial cells and for hydrophobic GC formulations. The mechanism of cell death differed between GCs, Hydro and TA activated the leukocyte elastase inhibitor/L-DNase II pathways but did not activate caspases. The mechanisms of cell death observed in cell cultures were similar to those observed in rat retinal explants. Taken together these results indicate that particular attention should be paid to the potential vascular side effects when administrating GCs clinically and in particular when developing sustained-release intraocular devices.

Scandinavian companies of banking, retailing and hotel sectors investing into the Baltic States-developing service sector

Diplomityö tehtiin Lappeenrannan yliopistossa päätavoitteenaan selvittää tärkeimmät motiivit, jotka ovat saaneet pohjoismaiset palvelualan yrityksetinvestoimaan Baltian maiden kehittyvillä markkinoilla. Pohjoismaiset yritykset ovat olleet aiemmin aktiivisia hyödyntämään Baltian maiden työvoimaa tuotantosektorilla. Suomalaiset yritykset ovat investoineet aiemmin telekommunikaatio- sekävaatetussektoreihin, mutta nykyisin investointien pääpaino on siirtynyt palvelualalle. Pankkisektori on erittäin kehittynyt pohjoismaissa ja ruotsalaiset yritykset ovat onnistuneet myös Baltiassa siirtyen markkinoille yksityistämisen tuomien mahdollisuuksien avulla. Nykyisin näillä yrityksillä on vahva jalansija Virossa sekä ovat etabloituneet myös Latviaan ja Liettuaan. Suomalaiset pankkialan yritykset ovat olleet vaatimattomampia tällä sektorilla. Vähittäiskauppiaat ovat vasta kansainvälistymisprosessinsa alkutaipaleella. Suomalaiset yritykset ovat laajentuneet Viroon ja tehneet yhteistyötä ruotsalaisten yritysten kanssa. Hotellisektorilla suomalaiset ja ruotsalaiset ovat edenneet rauhallisesti, mutta norjalainen ketju, Reval Hotel, on laajentunut kaikkiin Baltian maihin. Hotellisektorilla on luvassa kasvua lähivuosina. Kilpailutilanne on kiristynyt kaikilla palvelualan sektoreilla sekä paikallisten yritysten kasvun että ulkomaisten investoijien myötä. Elinolojen paraneminen vaikuttaa myös kilpailutilanteeseen kiristävästi, sillä se luo mahdollisuuksia yrityksille laajentua. Tämä diplomityö selvittäätilannetta valittujen yritysten kannalta niiden kansainvälistymisen alkutaipaleella.

Role of oxidation-reduction cycle of iron in direct leaching of zinc concentrate

Direct leaching is an alternative to conventional roast-leach-electrowin (RLE) zinc production method. The basic reaction of direct leach method is the oxidation of sphalerite concentrate in acidic liquid by ferric iron. The reaction mechanism and kinetics, mass transfer and current modifications of zinc concentrate direct leaching process are considered. Particular attention is paid to the oxidation-reduction cycle of iron and its role in direct leaching of zinc concentrate, since it can be one of the limiting factors of the leaching process under certain conditions. The oxidation-reduction cycle of iron was experimentally studied with goal of gaining new knowledge for developing the direct leaching of zinc concentrate. In order to obtain this aim, ferrous iron oxidation experiments were carried out. Affect of such parameters as temperature, pressure, sulfuric acid concentration, ferrous iron and copper concentrations was studied. Based on the experimental results, mathematical model of the ferrous iron oxidation rate was developed. According to results obtained during the study, the reaction rate orders for ferrous iron concentration, oxygen concentration and copper concentration are 0.777, 0.652 and 0.0951 respectively. Values predicted by model were in good concordance with the experimental results. The reliability of estimated parameters was evaluated by MCMC analysis which showed good parameters reliability.

Developing markets of energy biomass – local and global perspectives

The thesis explores global and national-level issues related to the development of markets for biomass for energy. The thesis consists of five separate papers and provides insights on selected issues. The aim of Paper I was to identify methodological and statistical challenges in assessing international solid and liquid biofuels trade and provide an overview of the Finnish situation with respect to the status of international solid and liquid biofuels trade. We found that, for the Finnish case, it is possible to qualify direct and indirect trade volumes of biofuels. The study showed that indirect trade of biofuels has a highly significant role in Finland and may be a significant sector also in global biofuels trade. The purpose of Paper II was to provide a quantified insight into Finnish prospects for meeting the national 2020 renewable energy targets and concurrently becoming a largescale producer of forest-biomass-based second-generation biofuels for feeding increasing demand in European markets. We found that Finland has good opportunities to realise a scenario to meet 2020 renewable energy targets and for large-scale production of wood-based biofuels. The potential net export of transport biofuels from Finland in 2020 would correspond to 2–3% of European demand. Paper III summarises the global status of international solid and liquid biofuels trade as illuminated by several separate sources. International trade of biofuels was estimated at nearly 1 EJ for 2006. Indirect trade of biofuels through trading of industrial roundwood and material by-products comprises the largest proportion of the trading, with a share of about two thirds. The purpose of Paper IV was to outline a comprehensive picture of the coverage of various certification schemes and sustainability principles relating to the entire value-added chain of biomass and bioenergy. Regardless of the intensive work that has been done in the field of sustainability schemes and principles concerning use of biomass for energy, weaknesses still exist. The objective of Paper V was to clarify the alternative scenarios for the international biomass market until 2020 and identify the underlying steps needed toward a wellfunctioning and sustainable market for biomass for energy purposes. An overall conclusion drawn from this analysis concerns the enormous opportunities related to the utilisation of biomass for energy in the coming decades.

Understanding, Managing And Developing A Well-Being Service Brand

The aim of this study is to analyze and understand a well-being service brand. Brands most definitely are a hot topic of today’s business world. Companies have started to realize the importance of branding, especially when talking about product related industries. Branding of services is a relatively new concept, which has gained less attention within academic literature. Though there is no legal distinction between product and service brands, they both have their own characteristics and qualities. The focus of the study is especially on the current brand images of both internal and external stakeholder groups. Understanding these brand perceptions will help in managing and developing the brand, so that it becomes even stronger, more recognized, and unified. This study is a quantitative, semi hypothetic-deductive single case study. The data for this study was collected throughout an online survey. The respondents represent both internal stakeholders, in direct contact with the service, as well as external stakeholders, who have no previous history with the service brand. The respondents represent a wide age spread, and are also geographically diverse. The study relies on a Finnish context. The study provides numerous managerial takeaways, especially because of its wide scope, on a topic that has never before been studied. All findings strongly reflected existing service brand theory, in addition with making the findings implementable for the case company.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.