CB-AIDS digital adapter : technical manual no. 1 /

Mode of access: Internet.

Grid and Simulation of Digital Communication Systems

The purpose of this paper is to turn researchers' attention to the use of grid computing for simulating digital communications and its large potential for decreasing significantly the duration of the experiments and for improving the statistical representativeness and reliability of the obtained results.

Shrek meets Vygotsky : rethinking adolescents' multimodal literacy practices in schools

Recent research has emphasized the multimodal and digital nature of adolescent literacy practices. These practices cross multiple social spaces, particularly settings outside of schools. This article re-examines current research to yield three caveats that counter assumptions about the pervasiveness, relevance, and spontaneity of youths’ multimodal practices in the digital communications environment: 1. It is incorrect to assume that today’s adolescents are all “digital natives”; 2. Engaging adolescents in multimodal textual practices must involve more than conforming the curriculum to their interests and practices, extending students’ repertoire of skills and genres; and 3. While some new multimodal practices are taken up by adolescents with minimal instruction in informal contexts, greater emphasis should be placed on expert scaffolding of these literacies in school settings.

Möbius transforms, coincident Boolean functions and non-coincidence property of Boolean functions

Boolean functions and their Möbius transforms are involved in logical calculation, digital communications, coding theory and modern cryptography. So far, little is known about the relations of Boolean functions and their Möbius transforms. This work is composed of three parts. In the first part, we present relations between a Boolean function and its Möbius transform so as to convert the truth table/algebraic normal form (ANF) to the ANF/truth table of a function in different conditions. In the second part, we focus on the special case when a Boolean function is identical to its Möbius transform. We call such functions coincident. In the third part, we generalize the concept of coincident functions and indicate that any Boolean function has the coincidence property even it is not coincident.

Medium-Coupled Bus-Based INS-GPS Sensor Fusion for Accurate and Reliable Positioning

A scheme for integration of stand-alone INS and GPS sensors is presented, with data interchange over an external bus. This ensures modularity and sensor interchangeability. Use of a medium-coupled scheme reduces data flow and computation, facilitating use in surface vehicles. Results show that the hybrid navigation system is capable of delivering high positioning accuracy.

Inovação tecnológica: análise comparativa entre dois métodos de coleta de dados sobre riscos e danos em enfermagem

Estudo de comparação entre dois métodos de coleta de dados, através da aplicação de um software, para avaliação dos fatores de risco e danos no trabalho de enfermagem em hospital. Objetiva analisar o uso do software (eletrônico) em comparação com o uso do instrumento impresso. Trata-se de um estudo estatístico, descritivo com abordagem quantitativa, desenvolvido nas enfermarias dos Serviços de Internações Clínicas e Serviços de Internações Cirúrgicas de um Hospital Universitário, no estado do Rio de Janeiro. A população do estudo foram os trabalhadores de enfermagem das unidades. A amostra foi definida por meio de amostragem não-probabilística e alocação da amostra ocorreu de forma aleatória em dois grupos, denominados grupo impresso e grupo eletrônico, com 52 participantes cada. Previamente a coleta de dados foram implementadas estratégias de pesquisa denominada teaser, através da comunicação digital aos trabalhadores. Posteriormente, foi ofertado aos participantes do formato impresso o questionário impresso, e os participantes do formato eletrônico receberam um link de acesso a home page. Os dados foram analisados através da estatística descritiva simples. Após a aplicação do questionário nos dois formatos, obteve-se resposta de 47 trabalhadores do grupo impresso (90,3%), e 17 trabalhadores do grupo eletrônico (32,7%). A aplicação do questionário impresso revelou algumas vantagens como o número de pessoas atingidas pela pesquisa, maior interação pesquisador e participante, taxa de retorno mais alta, e quanto às desvantagens a demanda maior de tempo, erros de transcrição, formulação de banco de dados, possibilidades de resposta em branco e erros de preenchimento. No formato eletrônico as vantagens incluem a facilidade de tabulação e análise dos dados, impossibilidade de não resposta, metodologia limpa e rápida, e como desvantagens, o acesso à internet no período de coleta de dados, saber usar o computador e menor taxa de resposta. Ambos os grupos observaram que o questionário possui boas instruções e fácil compreensão, além de curto tempo para resposta. Os trabalhadores perceberam a existência dos riscos ocupacionais, principalmente os ergonômicos, biológicos e de acidentes. Os principais danos à saúde provocados ou agravos pelo trabalho percebidos pelos trabalhadores foram os problemas osteomusculares, estresse, transtornos do sono, mudanças de humor e alterações de comportamento e varizes. Pode-se afirmar que não ocorreram diferenças acentuadas de percentual ao comparar a percepção dos trabalhadores do grupo impresso e do grupo eletrônico frente aos riscos e danos à saúde. Conclui-se que os dois processos de coleta de dados tiveram boa aceitação, no entanto, deve ser indicada a aplicação do questionário eletrônico junto com a ferramenta de acesso, no caso o computador, tablet.

Hardware design of cryptographic accelerators

With the rapid growth of the Internet and digital communications, the volume of sensitive electronic transactions being transferred and stored over and on insecure media has increased dramatically in recent years. The growing demand for cryptographic systems to secure this data, across a multitude of platforms, ranging from large servers to small mobile devices and smart cards, has necessitated research into low cost, flexible and secure solutions. As constraints on architectures such as area, speed and power become key factors in choosing a cryptosystem, methods for speeding up the development and evaluation process are necessary. This thesis investigates flexible hardware architectures for the main components of a cryptographic system. Dedicated hardware accelerators can provide significant performance improvements when compared to implementations on general purpose processors. Each of the designs proposed are analysed in terms of speed, area, power, energy and efficiency. Field Programmable Gate Arrays (FPGAs) are chosen as the development platform due to their fast development time and reconfigurable nature. Firstly, a reconfigurable architecture for performing elliptic curve point scalar multiplication on an FPGA is presented. Elliptic curve cryptography is one such method to secure data, offering similar security levels to traditional systems, such as RSA, but with smaller key sizes, translating into lower memory and bandwidth requirements. The architecture is implemented using different underlying algorithms and coordinates for dedicated Double-and-Add algorithms, twisted Edwards algorithms and SPA secure algorithms, and its power consumption and energy on an FPGA measured. Hardware implementation results for these new algorithms are compared against their software counterparts and the best choices for minimum area-time and area-energy circuits are then identified and examined for larger key and field sizes. Secondly, implementation methods for another component of a cryptographic system, namely hash functions, developed in the recently concluded SHA-3 hash competition are presented. Various designs from the three rounds of the NIST run competition are implemented on FPGA along with an interface to allow fair comparison of the different hash functions when operating in a standardised and constrained environment. Different methods of implementation for the designs and their subsequent performance is examined in terms of throughput, area and energy costs using various constraint metrics. Comparing many different implementation methods and algorithms is nontrivial. Another aim of this thesis is the development of generic interfaces used both to reduce implementation and test time and also to enable fair baseline comparisons of different algorithms when operating in a standardised and constrained environment. Finally, a hardware-software co-design cryptographic architecture is presented. This architecture is capable of supporting multiple types of cryptographic algorithms and is described through an application for performing public key cryptography, namely the Elliptic Curve Digital Signature Algorithm (ECDSA). This architecture makes use of the elliptic curve architecture and the hash functions described previously. These components, along with a random number generator, provide hardware acceleration for a Microblaze based cryptographic system. The trade-off in terms of performance for flexibility is discussed using dedicated software, and hardware-software co-design implementations of the elliptic curve point scalar multiplication block. Results are then presented in terms of the overall cryptographic system.

L'utopie numérique : discours et réalités sur la numérisation des salles de cinéma illustrés par le cas de l'entreprise DigiScreen

Pour respecter les droits d’auteur, la version électronique de ce mémoire a été dépouillée de ses documents visuels et audio-visuels. La version intégrale du mémoire a été déposée au Service de la gestion des documents et des archives de l'Université de Montréal.

An efficient scheme for the evaluation of coding performance of high speed links incorporating joint error behaviour based on Monte Carlo Method

While channel coding is a standard method of improving a system’s energy efficiency in digital communications, its practice does not extend to high-speed links. Increasing demands in network speeds are placing a large burden on the energy efficiency of high-speed links and render the benefit of channel coding for these systems a timely subject. The low error rates of interest and the presence of residual intersymbol interference (ISI) caused by hardware constraints impede the analysis and simulation of coded high-speed links. Focusing on the residual ISI and combined noise as the dominant error mechanisms, this paper analyses error correlation through concepts of error region, channel signature, and correlation distance. This framework provides a deeper insight into joint error behaviours in high-speed links, extends the range of statistical simulation for coded high-speed links, and provides a case against the use of biased Monte Carlo methods in this setting

Creació d'una xarxa de comunicacions Modbus per TsxMicro

L’objecte del projecte és el de crear una xarxa de comunicacions Modbus. La xarxa unirà els autòmats del laboratori de regulació Telemecanique TSX Micro (els 9 autòmats TSX 3705 i l’autòmat de nova adquisició TSX 3722). Com a complement de la xarxa, es prepararan dues experiències i un qüestionari. La primera experiència servirà als alumnes com a exemple de comunicació Modbus, i la segona, l’hauran de realitzar els alumnes. Aquesta segona experiència només és introductòria, no serà de gran dificultat i l’alumne no adquirirà grans coneixements, simplement agafarà nocions del funcionament d’una comunicació entre autòmats en el cas concret d’una xarxa Modbus. El qüestionari permetrà avaluar els coneixements adquirits sobre la comunicació Modbus abans de que l’alumne realitzi les experiències

Informationssäkerhet inom grafiska företag

The study shows the current need for security solutions concerning work with information in different areas.Investigations will show important solutions for printers’ needs to meet the increasingly harder demands forfast and safe digital communications. Important factors to be analyzed in the investigations are: access todifferent types of information, workers authority of information, access to the data base register internallyand externally, production solutions for an effective fault detection and data base solutions fororders and distribution.Planned and unplanned stops result in a standard of value in interruptions. Internal data bases areprotected by so-called “Fire Walls”, “Watch Dogs” and Virtual Private Networks. Offset plates are locked infor a definitive range of time. Subsequent destruction and remaining sheets are shredded and recycled. Alldocumentation is digital, in business control systems, which guarantees that no important documents arelying around in working places. Fault detection work is facilitated by the ability to fully track the order numberson incoming orders.

Redes sociais digitais e a comunicação interna: manual de conduta como ferramenta estratégica para as organizações

Pós-graduação em Comunicação - FAAC

Enabling Blocks for Integrated CMOS UWB Transceivers

The last decades have seen an unrivaled growth and diffusion of mobile telecommunications. Several standards have been developed to this purposes, from GSM mobile phone communications to WLAN IEEE 802.11, providing different services for the the transmission of signals ranging from voice to high data rate digital communications and Digital Video Broadcasting (DVB). In this wide research and market field, this thesis focuses on Ultra Wideband (UWB) communications, an emerging technology for providing very high data rate transmissions over very short distances. In particular the presented research deals with the circuit design of enabling blocks for MB-OFDM UWB CMOS single-chip transceivers, namely the frequency synthesizer and the transmission mixer and power amplifier. First we discuss three different models for the simulation of chargepump phase-locked loops, namely the continuous time s-domain and discrete time z-domain approximations and the exact semi-analytical time-domain model. The limitations of the two approximated models are analyzed in terms of error in the computed settling time as a function of loop parameters, deriving practical conditions under which the different models are reliable for fast settling PLLs up to fourth order. Besides, a phase noise analysis method based upon the time-domain model is introduced and compared to the results obtained by means of the s-domain model. We compare the three models over the simulation of a fast switching PLL to be integrated in a frequency synthesizer for WiMedia MB-OFDM UWB systems. In the second part, the theoretical analysis is applied to the design of a 60mW 3.4 to 9.2GHz 12 Bands frequency synthesizer for MB-OFDM UWB based on two wide-band PLLs. The design is presented and discussed up to layout level. A test chip has been implemented in TSMC CMOS 90nm technology, measured data is provided. The functionality of the circuit is proved and specifications are met with state-of-the-art area occupation and power consumption. The last part of the thesis deals with the design of a transmission mixer and a power amplifier for MB-OFDM UWB band group 1. The design has been carried on up to layout level in ST Microlectronics 65nm CMOS technology. Main characteristics of the systems are the wideband behavior (1.6 GHz of bandwidth) and the constant behavior over process parameters, temperature and supply voltage thanks to the design of dedicated adaptive biasing circuits.

Assessment of the population structure and temporal changes in spatial dynamics and genetic characteristics of the Atlantic bluefin tuna under a fishery independent framework.

As a large and long-lived species with high economic value, restricted spawning areas and short spawning periods, the Atlantic bluefin tuna (BFT; Thunnus thynnus) is particularly susceptible to over-exploitation. Although BFT have been targeted by fisheries in the Mediterranean Sea for thousands of years, it has only been in these last decades that the exploitation rate has reached far beyond sustainable levels. An understanding of the population structure, spatial dynamics, exploitation rates and the environmental variables that affect BFT is crucial for the conservation of the species. The aims of this PhD project were 1) to assess the accuracy of larval identification methods, 2) determine the genetic structure of modern BFT populations, 3) assess the self-recruitment rate in the Gulf of Mexico and Mediterranean spawning areas, 4) estimate the immigration rate of BFT to feeding aggregations from the various spawning areas, and 5) develop tools capable of investigating the temporal stability of population structuring in the Mediterranean Sea. Several weaknesses in modern morphology-based taxonomy including demographic decline of expert taxonomists, flawed identification keys, reluctance of the taxonomic community to embrace advances in digital communications and a general scarcity of modern user-friendly materials are reviewed. Barcoding of scombrid larvae revealed important differences in the accuracy of the taxonomic identifications carried out by different ichthyoplanktologists following morphology-based methods. Using a Genotyping-by-Sequencing a panel of 95 SNPs was developed and used to characterize the population structuring of BFT and composition of adult feeding aggregations. Using novel molecular techniques, DNA was extracted from bluefin tuna vertebrae excavated from late iron age, ancient roman settlements Byzantine-era Constantinople and a 20th century collection. A second panel of 96 SNPs was developed to genotype historical and modern samples in order to elucidate changes in population structuring and allele frequencies of loci associated with selective traits.

Experimentel ADS-B based surveillance

This paper describes an ADS-B implementation in air-to-air and ground based experimental surveillance within a prototype ATM system. The relations between airborne and ground systems related to surveillance are detailed, and the prototype surveillance systems and their algorithms described. Their performance is analysed, based both on simulated and real data.