Digested sludge: delineation and modeling for ocean disposal

Experimental work was performed to delineate the system of digested sludge particles and associated trace metals and also to measure the interactions of sludge with seawater. Particle-size and particle number distributions were measured with a Coulter Counter. Number counts in excess of 10¹² particles per liter were found in both the City of Los Angeles Hyperion mesophilic digested sludge and the Los Angeles County Sanitation Districts (LACSD) digested primary sludge. More than 90 percent of the particles had diameters less than 10 microns.

Total and dissolved trace metals (Ag, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) were measured in LACSD sludge. Manganese was the only metal whose dissolved fraction exceeded one percent of the total metal. Sedimentation experiments for several dilutions of LACSD sludge in seawater showed that the sedimentation velocities of the sludge particles decreased as the dilution factor increased. A tenfold increase in dilution shifted the sedimentation velocity distribution by an order of magnitude. Chromium, Cu, Fe, Ni, Pb, and Zn were also followed during sedimentation. To a first approximation these metals behaved like the particles.

Solids and selected trace metals (Cr, Cu, Fe, Ni, Pb, and Zn) were monitored in oxic mixtures of both Hyperion and LACSD sludges for periods of 10 to 28 days. Less than 10 percent of the filterable solids dissolved or were oxidized. Only Ni was mobilized away from the particles. The majority of the mobilization was complete in less than one day.

The experimental data of this work were combined with oceanographic, biological, and geochemical information to propose and model the discharge of digested sludge to the San Pedro and Santa Monica Basins. A hydraulic computer simulation for a round buoyant jet in a density stratified medium showed that discharges of sludge effluent mixture at depths of 730 m would rise no more than 120 m. Initial jet mixing provided dilution estimates of 450 to 2600. Sedimentation analyses indicated that the solids would reach the sediments within 10 km of the point discharge.

Mass balances on the oxidizable chemical constituents in sludge indicated that the nearly anoxic waters of the basins would become wholly anoxic as a result of proposed discharges. From chemical-equilibrium computer modeling of the sludge digester and dilutions of sludge in anoxic seawater, it was predicted that the chemistry of all trace metals except Cr and Mn will be controlled by the precipitation of metal sulfide solids. This metal speciation held for dilutions up to 3000.

The net environmental impacts of this scheme should be salutary. The trace metals in the sludge should be immobilized in the anaerobic bottom sediments of the basins. Apparently no lifeforms higher than bacteria are there to be disrupted. The proposed deep-water discharges would remove the need for potentially expensive and energy-intensive land disposal alternatives and would end the discharge to the highly productive water near the ocean surface.

Image-Based Delineation and Classification of Built Heritage Masonry

Fundacion Zain is developing new built heritage assessment protocols. The goal is to objectivize and standardize the analysis and decision process that leads to determining the degree of protection of built heritage in the Basque Country. The ultimate step in this objectivization and standardization effort will be the development of an information and communication technology (ICT) tool for the assessment of built heritage. This paper presents the ground work carried out to make this tool possible: the automatic, image-based delineation of stone masonry. This is a necessary first step in the development of the tool, as the built heritage that will be assessed consists of stone masonry construction, and many of the features analyzed can be characterized according to the geometry and arrangement of the stones. Much of the assessment is carried out through visual inspection. Thus, this process will be automated by applying image processing on digital images of the elements under inspection. The principal contribution of this paper is the automatic delineation the framework proposed. The other contribution is the performance evaluation of this delineation as the input to a classifier for a geometrically characterized feature of a built heritage object. The element chosen to perform this evaluation is the stone arrangement of masonry walls. The validity of the proposed framework is assessed on real images of masonry walls.

DELINEATION OF DEFECTS IN SIMOX STRUCTURES USING A CHEMICAL ETCHING TECHNIQUE

Residual defects in the overlayer of fully annealed SIMOX material have been studied by means of a chemical etching technique. The etching procedure has been calibrated and an optimum recipe is reported. Observations using optical microscopy and transmission electron microscopy have been used to quantify the defect densities and good agreement between the two techniques has been established, confirming that the optimised chemical etching process can be used with confidence to determine the dislocation density for values < 10(7) cm-2.

Improved delineation of short cortical association fibers and gray/white matter boundary using whole-brain three-dimensional diffusion tensor imaging at submillimeter spatial resolution.

Recent emergence of human connectome imaging has led to a high demand on angular and spatial resolutions for diffusion magnetic resonance imaging (MRI). While there have been significant growths in high angular resolution diffusion imaging, the improvement in spatial resolution is still limited due to a number of technical challenges, such as the low signal-to-noise ratio and high motion artifacts. As a result, the benefit of a high spatial resolution in the whole-brain connectome imaging has not been fully evaluated in vivo. In this brief report, the impact of spatial resolution was assessed in a newly acquired whole-brain three-dimensional diffusion tensor imaging data set with an isotropic spatial resolution of 0.85 mm. It was found that the delineation of short cortical association fibers is drastically improved as well as the definition of fiber pathway endings into the gray/white matter boundary-both of which will help construct a more accurate structural map of the human brain connectome.

Delineation of a recognisable phenotype of interstitial deletion 3 (q22.3q25.1) in a case with previously unreported truncus arteriosus

Interstitial deletions of chromosome 3q22.3e25.1 are very rare with only five previous reports of deletions in this region [1,2,4,7,9]. We describe a case of a female infant with a de novo deletion. Dysmorphic features and congenital heart disease led to a clinical genetics assessment on day 1 of life. Chromosomal analysis showed an interstitial deletion with a female karyotype 46,XX,del (3)(q23q25.1) dn. Subsequent array CGH demonstrated the breakpoints as 3q22.3q25.1. This is the first documented association with a truncus arteriosus. We identify an emerging clinical phenotype of microphthalmia, microcephaly, congenital heart disease, slow feeding, skeletal abnormalities, with an abnormal facies and developmental delay. Array CGH demonstrated that the FOXL2 gene responsible for BPES was not deleted in this patient. (C) 2010 Elsevier Masson SAS. All rights reserved.

18F-fluorodeoxyglucose positron emission tomography/computed tomography-based radiotherapy target volume definition in non-small-cell lung cancer: delineation by radiation oncologists vs. joint outlining with a PET radiologist?

Purpose: F-18-Fluorodeoxyglucose positron emission tomography/computed tomography (PET/CT) has benefits in target volume (TV) definition in radiotherapy treatment planning (RTP) for non small-cell lung cancer (NSCLC); however, an optimal protocol for TV delineation has not been determined. We investigate volumetric and positional variation in gross tumor volume (GTV) delineation using a planning PET/CT among three radiation oncologists and a PET radiologist.

RESURRECTION OF THE GENUS OSMUNDEA WITH AN EMENDATION OF THE GENERIC DELINEATION OF LAURENCIA (CERAMIALES, RHODOPHYTA)

Vegetative and reproductive development of some European and Californian species of Laurencia Lamouroux (Ceramiales, Rhodophyta), L. obtusa (Hudson) Lamouroux, L. spectabilis Postels et Ruprecht, L. crispa Hollenberg, L. osmunda (S.G. Gmelin) Maggs et Hommersand, L. pinnatifida (Hudson) Lamouroux and L. truncata Kutzing, is investigated on the basis of liquid-preserved and herbarium specimens. The latter five species share several features, but they differ distinctly from L. obtusa, the lectotype of the genus, in essential anatomical characters of vegetative and male reproductive structures and tetrasporangial development. In these five species each vegetative axial segment produces two rather than four pericentral cells, and spermatangial branches (filaments) are produced in apical pits of branchlets from apical and epidermal cells rather than from trichoblasts arising from axial cells. The spermatangial branches are usually branched alternately and usually terminate in a cluster of several large sterile vesicular cells, rather than being branched dichotomously and terminating in a single, or occasionally a row of two, large sterile vesicular cells as in L. obtusa. Apical spermatangial pits of fertile male branchlets (except for those in L. truncata) are pocket- (or urn)-shaped, with an ostiole-like upper opening, rather than cup- (or bowl)-shaped. In these five species tetrasporangia are produced laterally from random epidermal cells rather than abaxially from particular pericentral cells (the third and fourth ones) as in L. obtusa, and the two presporangial cover cells are aligned parallel rather than transverse to the stichidial axis in surface view. These important differences strongly suggest that L. spectabilis, L. crispa, L. osmunda, L. pinnatifida and L. truncata occupy a phylogenetically different position from L. obtusa, and lead to the conclusion that the genus Osmundea Stackhouse, which was based on 0. expansa Stackhouse, nom. illeg. (= Laurencia osmunda) and which has been a nomen rejiciendum as an earlier facultative synonym of Laurencia, should be resurrected. Emendations of the generic criteria of Laurencia and Osmundea are proposed here, and relevant nomenclatural changes for several Laurencia species are also included.